| # CPUfreq core |
| obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o |
| obj-$(CONFIG_PM_OPP) += cpufreq_opp.o |
| |
| # CPUfreq stats |
| obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o |
| |
| # CPUfreq governors |
| obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o |
| obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o |
| obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o |
| obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o |
| obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o |
| obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o |
| |
| obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o |
| |
| ################################################################################## |
| # x86 drivers. |
| # Link order matters. K8 is preferred to ACPI because of firmware bugs in early |
| # K8 systems. This is still the case but acpi-cpufreq errors out so that |
| # powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers. |
| # speedstep-* is preferred over p4-clockmod. |
| |
| obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o |
| obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o |
| obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o |
| obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o |
| obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o |
| obj-$(CONFIG_X86_LONGHAUL) += longhaul.o |
| obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o |
| obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o |
| obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o |
| obj-$(CONFIG_X86_LONGRUN) += longrun.o |
| obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o |
| obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o |
| obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o |
| obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o |
| obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o |
| obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o |
| obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o |
| obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o |
| obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o |
| obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o |
| |
| ################################################################################## |
| # ARM SoC drivers |
| obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o |
| # big LITTLE per platform glues. Keep DT_BL_CPUFREQ as the last entry in all big |
| # LITTLE drivers, so that it is probed last. |
| obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o |
| |
| obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o |
| obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o |
| obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o |
| arm-exynos-cpufreq-y := exynos-cpufreq.o |
| arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o |
| arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o |
| arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o |
| obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o |
| obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o |
| obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o |
| obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o |
| obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o |
| obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o |
| obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o |
| obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o |
| obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o |
| obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o |
| obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o |
| obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o |
| obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o |
| obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o |
| obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o |
| obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o |
| obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o |
| obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o |
| obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o |
| obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o |
| obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o |
| |
| ################################################################################## |
| # PowerPC platform drivers |
| obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o |
| ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o |
| obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o |
| obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o |
| obj-$(CONFIG_PPC_CORENET_CPUFREQ) += ppc-corenet-cpufreq.o |
| obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o |
| obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o |
| obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o |
| obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o |
| |
| ################################################################################## |
| # Other platform drivers |
| obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o |
| obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o |
| obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o |
| obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o |
| obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o |
| obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o |
| obj-$(CONFIG_LOONGSON1_CPUFREQ) += ls1x-cpufreq.o |
| obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o |
| obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o |
| obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o |
| obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o |