| //------------------------------------------------------------------------------ |
| // <copyright file="bmi.c" company="Atheros"> |
| // Copyright (c) 2004-2010 Atheros Corporation. All rights reserved. |
| // |
| // |
| // Permission to use, copy, modify, and/or distribute this software for any |
| // purpose with or without fee is hereby granted, provided that the above |
| // copyright notice and this permission notice appear in all copies. |
| // |
| // THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| // WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| // MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| // ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| // WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| // ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| // OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| // |
| // |
| //------------------------------------------------------------------------------ |
| //============================================================================== |
| // |
| // Author(s): ="Atheros" |
| //============================================================================== |
| |
| |
| #ifdef THREAD_X |
| #include <string.h> |
| #endif |
| |
| #include "hif.h" |
| #include "bmi.h" |
| #include "htc_api.h" |
| #include "bmi_internal.h" |
| |
| #ifdef ATH_DEBUG_MODULE |
| static ATH_DEBUG_MASK_DESCRIPTION bmi_debug_desc[] = { |
| { ATH_DEBUG_BMI , "BMI Tracing"}, |
| }; |
| |
| ATH_DEBUG_INSTANTIATE_MODULE_VAR(bmi, |
| "bmi", |
| "Boot Manager Interface", |
| ATH_DEBUG_MASK_DEFAULTS, |
| ATH_DEBUG_DESCRIPTION_COUNT(bmi_debug_desc), |
| bmi_debug_desc); |
| |
| #endif |
| |
| /* |
| Although we had envisioned BMI to run on top of HTC, this is not how the |
| final implementation ended up. On the Target side, BMI is a part of the BSP |
| and does not use the HTC protocol nor even DMA -- it is intentionally kept |
| very simple. |
| */ |
| |
| static bool pendingEventsFuncCheck = false; |
| static u32 *pBMICmdCredits; |
| static u8 *pBMICmdBuf; |
| #define MAX_BMI_CMDBUF_SZ (BMI_DATASZ_MAX + \ |
| sizeof(u32) /* cmd */ + \ |
| sizeof(u32) /* addr */ + \ |
| sizeof(u32))/* length */ |
| #define BMI_COMMAND_FITS(sz) ((sz) <= MAX_BMI_CMDBUF_SZ) |
| |
| /* APIs visible to the driver */ |
| void |
| BMIInit(void) |
| { |
| bmiDone = false; |
| pendingEventsFuncCheck = false; |
| |
| /* |
| * On some platforms, it's not possible to DMA to a static variable |
| * in a device driver (e.g. Linux loadable driver module). |
| * So we need to A_MALLOC space for "command credits" and for commands. |
| * |
| * Note: implicitly relies on A_MALLOC to provide a buffer that is |
| * suitable for DMA (or PIO). This buffer will be passed down the |
| * bus stack. |
| */ |
| if (!pBMICmdCredits) { |
| pBMICmdCredits = (u32 *)A_MALLOC_NOWAIT(4); |
| A_ASSERT(pBMICmdCredits); |
| } |
| |
| if (!pBMICmdBuf) { |
| pBMICmdBuf = (u8 *)A_MALLOC_NOWAIT(MAX_BMI_CMDBUF_SZ); |
| A_ASSERT(pBMICmdBuf); |
| } |
| |
| A_REGISTER_MODULE_DEBUG_INFO(bmi); |
| } |
| |
| void |
| BMICleanup(void) |
| { |
| if (pBMICmdCredits) { |
| A_FREE(pBMICmdCredits); |
| pBMICmdCredits = NULL; |
| } |
| |
| if (pBMICmdBuf) { |
| A_FREE(pBMICmdBuf); |
| pBMICmdBuf = NULL; |
| } |
| } |
| |
| int |
| BMIDone(HIF_DEVICE *device) |
| { |
| int status; |
| u32 cid; |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n")); |
| return 0; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device)); |
| bmiDone = true; |
| cid = BMI_DONE; |
| |
| status = bmiBufferSend(device, (u8 *)&cid, sizeof(cid)); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| if (pBMICmdCredits) { |
| A_FREE(pBMICmdCredits); |
| pBMICmdCredits = NULL; |
| } |
| |
| if (pBMICmdBuf) { |
| A_FREE(pBMICmdBuf); |
| pBMICmdBuf = NULL; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n")); |
| |
| return 0; |
| } |
| |
| int |
| BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info) |
| { |
| int status; |
| u32 cid; |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device)); |
| cid = BMI_GET_TARGET_INFO; |
| |
| status = bmiBufferSend(device, (u8 *)&cid, sizeof(cid)); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| status = bmiBufferReceive(device, (u8 *)&targ_info->target_ver, |
| sizeof(targ_info->target_ver), true); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n")); |
| return A_ERROR; |
| } |
| |
| if (targ_info->target_ver == TARGET_VERSION_SENTINAL) { |
| /* Determine how many bytes are in the Target's targ_info */ |
| status = bmiBufferReceive(device, (u8 *)&targ_info->target_info_byte_count, |
| sizeof(targ_info->target_info_byte_count), true); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n")); |
| return A_ERROR; |
| } |
| |
| /* |
| * The Target's targ_info doesn't match the Host's targ_info. |
| * We need to do some backwards compatibility work to make this OK. |
| */ |
| A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info)); |
| |
| /* Read the remainder of the targ_info */ |
| status = bmiBufferReceive(device, |
| ((u8 *)targ_info)+sizeof(targ_info->target_info_byte_count), |
| sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count), true); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n", |
| targ_info->target_info_byte_count)); |
| return A_ERROR; |
| } |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", |
| targ_info->target_ver, targ_info->target_type)); |
| |
| return 0; |
| } |
| |
| int |
| BMIReadMemory(HIF_DEVICE *device, |
| u32 address, |
| u8 *buffer, |
| u32 length) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| u32 remaining, rxlen; |
| |
| A_ASSERT(BMI_COMMAND_FITS(BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length))); |
| memset (pBMICmdBuf, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", |
| device, address, length)); |
| |
| cid = BMI_READ_MEMORY; |
| |
| remaining = length; |
| |
| while (remaining) |
| { |
| rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX; |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address)); |
| offset += sizeof(address); |
| memcpy(&(pBMICmdBuf[offset]), &rxlen, sizeof(rxlen)); |
| offset += sizeof(length); |
| |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| status = bmiBufferReceive(device, pBMICmdBuf, rxlen, true); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); |
| return A_ERROR; |
| } |
| memcpy(&buffer[length - remaining], pBMICmdBuf, rxlen); |
| remaining -= rxlen; address += rxlen; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n")); |
| return 0; |
| } |
| |
| int |
| BMIWriteMemory(HIF_DEVICE *device, |
| u32 address, |
| u8 *buffer, |
| u32 length) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| u32 remaining, txlen; |
| const u32 header = sizeof(cid) + sizeof(address) + sizeof(length); |
| u8 alignedBuffer[BMI_DATASZ_MAX]; |
| u8 *src; |
| |
| A_ASSERT(BMI_COMMAND_FITS(BMI_DATASZ_MAX + header)); |
| memset (pBMICmdBuf, 0, BMI_DATASZ_MAX + header); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", |
| device, address, length)); |
| |
| cid = BMI_WRITE_MEMORY; |
| |
| remaining = length; |
| while (remaining) |
| { |
| src = &buffer[length - remaining]; |
| if (remaining < (BMI_DATASZ_MAX - header)) { |
| if (remaining & 3) { |
| /* align it with 4 bytes */ |
| remaining = remaining + (4 - (remaining & 3)); |
| memcpy(alignedBuffer, src, remaining); |
| src = alignedBuffer; |
| } |
| txlen = remaining; |
| } else { |
| txlen = (BMI_DATASZ_MAX - header); |
| } |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address)); |
| offset += sizeof(address); |
| memcpy(&(pBMICmdBuf[offset]), &txlen, sizeof(txlen)); |
| offset += sizeof(txlen); |
| memcpy(&(pBMICmdBuf[offset]), src, txlen); |
| offset += txlen; |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| remaining -= txlen; address += txlen; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n")); |
| |
| return 0; |
| } |
| |
| int |
| BMIExecute(HIF_DEVICE *device, |
| u32 address, |
| u32 *param) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| |
| A_ASSERT(BMI_COMMAND_FITS(sizeof(cid) + sizeof(address) + sizeof(param))); |
| memset (pBMICmdBuf, 0, sizeof(cid) + sizeof(address) + sizeof(param)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n", |
| device, address, *param)); |
| |
| cid = BMI_EXECUTE; |
| |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address)); |
| offset += sizeof(address); |
| memcpy(&(pBMICmdBuf[offset]), param, sizeof(*param)); |
| offset += sizeof(*param); |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*param), false); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); |
| return A_ERROR; |
| } |
| |
| memcpy(param, pBMICmdBuf, sizeof(*param)); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param)); |
| return 0; |
| } |
| |
| int |
| BMISetAppStart(HIF_DEVICE *device, |
| u32 address) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| |
| A_ASSERT(BMI_COMMAND_FITS(sizeof(cid) + sizeof(address))); |
| memset (pBMICmdBuf, 0, sizeof(cid) + sizeof(address)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n", |
| device, address)); |
| |
| cid = BMI_SET_APP_START; |
| |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address)); |
| offset += sizeof(address); |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n")); |
| return 0; |
| } |
| |
| int |
| BMIReadSOCRegister(HIF_DEVICE *device, |
| u32 address, |
| u32 *param) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| |
| A_ASSERT(BMI_COMMAND_FITS(sizeof(cid) + sizeof(address))); |
| memset (pBMICmdBuf, 0, sizeof(cid) + sizeof(address)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n", |
| device, address)); |
| |
| cid = BMI_READ_SOC_REGISTER; |
| |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address)); |
| offset += sizeof(address); |
| |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*param), true); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); |
| return A_ERROR; |
| } |
| memcpy(param, pBMICmdBuf, sizeof(*param)); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param)); |
| return 0; |
| } |
| |
| int |
| BMIWriteSOCRegister(HIF_DEVICE *device, |
| u32 address, |
| u32 param) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| |
| A_ASSERT(BMI_COMMAND_FITS(sizeof(cid) + sizeof(address) + sizeof(param))); |
| memset (pBMICmdBuf, 0, sizeof(cid) + sizeof(address) + sizeof(param)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n", |
| device, address, param)); |
| |
| cid = BMI_WRITE_SOC_REGISTER; |
| |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address)); |
| offset += sizeof(address); |
| memcpy(&(pBMICmdBuf[offset]), ¶m, sizeof(param)); |
| offset += sizeof(param); |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n")); |
| return 0; |
| } |
| |
| int |
| BMIrompatchInstall(HIF_DEVICE *device, |
| u32 ROM_addr, |
| u32 RAM_addr, |
| u32 nbytes, |
| u32 do_activate, |
| u32 *rompatch_id) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| |
| A_ASSERT(BMI_COMMAND_FITS(sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + |
| sizeof(nbytes) + sizeof(do_activate))); |
| memset(pBMICmdBuf, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + |
| sizeof(nbytes) + sizeof(do_activate)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n", |
| device, ROM_addr, RAM_addr, nbytes, do_activate)); |
| |
| cid = BMI_ROMPATCH_INSTALL; |
| |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &ROM_addr, sizeof(ROM_addr)); |
| offset += sizeof(ROM_addr); |
| memcpy(&(pBMICmdBuf[offset]), &RAM_addr, sizeof(RAM_addr)); |
| offset += sizeof(RAM_addr); |
| memcpy(&(pBMICmdBuf[offset]), &nbytes, sizeof(nbytes)); |
| offset += sizeof(nbytes); |
| memcpy(&(pBMICmdBuf[offset]), &do_activate, sizeof(do_activate)); |
| offset += sizeof(do_activate); |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*rompatch_id), true); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); |
| return A_ERROR; |
| } |
| memcpy(rompatch_id, pBMICmdBuf, sizeof(*rompatch_id)); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id)); |
| return 0; |
| } |
| |
| int |
| BMIrompatchUninstall(HIF_DEVICE *device, |
| u32 rompatch_id) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| |
| A_ASSERT(BMI_COMMAND_FITS(sizeof(cid) + sizeof(rompatch_id))); |
| memset (pBMICmdBuf, 0, sizeof(cid) + sizeof(rompatch_id)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n", |
| device, rompatch_id)); |
| |
| cid = BMI_ROMPATCH_UNINSTALL; |
| |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &rompatch_id, sizeof(rompatch_id)); |
| offset += sizeof(rompatch_id); |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id)); |
| return 0; |
| } |
| |
| static int |
| _BMIrompatchChangeActivation(HIF_DEVICE *device, |
| u32 rompatch_count, |
| u32 *rompatch_list, |
| u32 do_activate) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| u32 length; |
| |
| A_ASSERT(BMI_COMMAND_FITS(BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count))); |
| memset(pBMICmdBuf, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n", |
| device, rompatch_count)); |
| |
| cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE; |
| |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &rompatch_count, sizeof(rompatch_count)); |
| offset += sizeof(rompatch_count); |
| length = rompatch_count * sizeof(*rompatch_list); |
| memcpy(&(pBMICmdBuf[offset]), rompatch_list, length); |
| offset += length; |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n")); |
| |
| return 0; |
| } |
| |
| int |
| BMIrompatchActivate(HIF_DEVICE *device, |
| u32 rompatch_count, |
| u32 *rompatch_list) |
| { |
| return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1); |
| } |
| |
| int |
| BMIrompatchDeactivate(HIF_DEVICE *device, |
| u32 rompatch_count, |
| u32 *rompatch_list) |
| { |
| return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0); |
| } |
| |
| int |
| BMILZData(HIF_DEVICE *device, |
| u8 *buffer, |
| u32 length) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| u32 remaining, txlen; |
| const u32 header = sizeof(cid) + sizeof(length); |
| |
| A_ASSERT(BMI_COMMAND_FITS(BMI_DATASZ_MAX+header)); |
| memset (pBMICmdBuf, 0, BMI_DATASZ_MAX+header); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI Send LZ Data: Enter (device: 0x%p, length: %d)\n", |
| device, length)); |
| |
| cid = BMI_LZ_DATA; |
| |
| remaining = length; |
| while (remaining) |
| { |
| txlen = (remaining < (BMI_DATASZ_MAX - header)) ? |
| remaining : (BMI_DATASZ_MAX - header); |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &txlen, sizeof(txlen)); |
| offset += sizeof(txlen); |
| memcpy(&(pBMICmdBuf[offset]), &buffer[length - remaining], txlen); |
| offset += txlen; |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); |
| return A_ERROR; |
| } |
| remaining -= txlen; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI LZ Data: Exit\n")); |
| |
| return 0; |
| } |
| |
| int |
| BMILZStreamStart(HIF_DEVICE *device, |
| u32 address) |
| { |
| u32 cid; |
| int status; |
| u32 offset; |
| |
| A_ASSERT(BMI_COMMAND_FITS(sizeof(cid) + sizeof(address))); |
| memset (pBMICmdBuf, 0, sizeof(cid) + sizeof(address)); |
| |
| if (bmiDone) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, |
| ("BMI LZ Stream Start: Enter (device: 0x%p, address: 0x%x)\n", |
| device, address)); |
| |
| cid = BMI_LZ_STREAM_START; |
| offset = 0; |
| memcpy(&(pBMICmdBuf[offset]), &cid, sizeof(cid)); |
| offset += sizeof(cid); |
| memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address)); |
| offset += sizeof(address); |
| status = bmiBufferSend(device, pBMICmdBuf, offset); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to Start LZ Stream to the device\n")); |
| return A_ERROR; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI LZ Stream Start: Exit\n")); |
| |
| return 0; |
| } |
| |
| /* BMI Access routines */ |
| int |
| bmiBufferSend(HIF_DEVICE *device, |
| u8 *buffer, |
| u32 length) |
| { |
| int status; |
| u32 timeout; |
| u32 address; |
| u32 mboxAddress[HTC_MAILBOX_NUM_MAX]; |
| |
| HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, |
| &mboxAddress[0], sizeof(mboxAddress)); |
| |
| *pBMICmdCredits = 0; |
| timeout = BMI_COMMUNICATION_TIMEOUT; |
| |
| while(timeout-- && !(*pBMICmdCredits)) { |
| /* Read the counter register to get the command credits */ |
| address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; |
| /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause |
| * a decrement, while the remaining 3 bytes has no effect. The rationale behind this is to |
| * make all HIF accesses 4-byte aligned */ |
| status = HIFReadWrite(device, address, (u8 *)pBMICmdCredits, 4, |
| HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n")); |
| return A_ERROR; |
| } |
| /* the counter is only 8=bits, ignore anything in the upper 3 bytes */ |
| (*pBMICmdCredits) &= 0xFF; |
| } |
| |
| if (*pBMICmdCredits) { |
| address = mboxAddress[ENDPOINT1]; |
| status = HIFReadWrite(device, address, buffer, length, |
| HIF_WR_SYNC_BYTE_INC, NULL); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n")); |
| return A_ERROR; |
| } |
| } else { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmiBufferSend\n")); |
| return A_ERROR; |
| } |
| |
| return status; |
| } |
| |
| int |
| bmiBufferReceive(HIF_DEVICE *device, |
| u8 *buffer, |
| u32 length, |
| bool want_timeout) |
| { |
| int status; |
| u32 address; |
| u32 mboxAddress[HTC_MAILBOX_NUM_MAX]; |
| HIF_PENDING_EVENTS_INFO hifPendingEvents; |
| static HIF_PENDING_EVENTS_FUNC getPendingEventsFunc = NULL; |
| |
| if (!pendingEventsFuncCheck) { |
| /* see if the HIF layer implements an alternative function to get pending events |
| * do this only once! */ |
| HIFConfigureDevice(device, |
| HIF_DEVICE_GET_PENDING_EVENTS_FUNC, |
| &getPendingEventsFunc, |
| sizeof(getPendingEventsFunc)); |
| pendingEventsFuncCheck = true; |
| } |
| |
| HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, |
| &mboxAddress[0], sizeof(mboxAddress)); |
| |
| /* |
| * During normal bootup, small reads may be required. |
| * Rather than issue an HIF Read and then wait as the Target |
| * adds successive bytes to the FIFO, we wait here until |
| * we know that response data is available. |
| * |
| * This allows us to cleanly timeout on an unexpected |
| * Target failure rather than risk problems at the HIF level. In |
| * particular, this avoids SDIO timeouts and possibly garbage |
| * data on some host controllers. And on an interconnect |
| * such as Compact Flash (as well as some SDIO masters) which |
| * does not provide any indication on data timeout, it avoids |
| * a potential hang or garbage response. |
| * |
| * Synchronization is more difficult for reads larger than the |
| * size of the MBOX FIFO (128B), because the Target is unable |
| * to push the 129th byte of data until AFTER the Host posts an |
| * HIF Read and removes some FIFO data. So for large reads the |
| * Host proceeds to post an HIF Read BEFORE all the data is |
| * actually available to read. Fortunately, large BMI reads do |
| * not occur in practice -- they're supported for debug/development. |
| * |
| * So Host/Target BMI synchronization is divided into these cases: |
| * CASE 1: length < 4 |
| * Should not happen |
| * |
| * CASE 2: 4 <= length <= 128 |
| * Wait for first 4 bytes to be in FIFO |
| * If CONSERVATIVE_BMI_READ is enabled, also wait for |
| * a BMI command credit, which indicates that the ENTIRE |
| * response is available in the the FIFO |
| * |
| * CASE 3: length > 128 |
| * Wait for the first 4 bytes to be in FIFO |
| * |
| * For most uses, a small timeout should be sufficient and we will |
| * usually see a response quickly; but there may be some unusual |
| * (debug) cases of BMI_EXECUTE where we want an larger timeout. |
| * For now, we use an unbounded busy loop while waiting for |
| * BMI_EXECUTE. |
| * |
| * If BMI_EXECUTE ever needs to support longer-latency execution, |
| * especially in production, this code needs to be enhanced to sleep |
| * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently |
| * a function of Host processor speed. |
| */ |
| if (length >= 4) { /* NB: Currently, always true */ |
| /* |
| * NB: word_available is declared static for esoteric reasons |
| * having to do with protection on some OSes. |
| */ |
| static u32 word_available; |
| u32 timeout; |
| |
| word_available = 0; |
| timeout = BMI_COMMUNICATION_TIMEOUT; |
| while((!want_timeout || timeout--) && !word_available) { |
| |
| if (getPendingEventsFunc != NULL) { |
| status = getPendingEventsFunc(device, |
| &hifPendingEvents, |
| NULL); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMI: Failed to get pending events \n")); |
| break; |
| } |
| |
| if (hifPendingEvents.AvailableRecvBytes >= sizeof(u32)) { |
| word_available = 1; |
| } |
| continue; |
| } |
| |
| status = HIFReadWrite(device, RX_LOOKAHEAD_VALID_ADDRESS, (u8 *)&word_available, |
| sizeof(word_available), HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read RX_LOOKAHEAD_VALID register\n")); |
| return A_ERROR; |
| } |
| /* We did a 4-byte read to the same register; all we really want is one bit */ |
| word_available &= (1 << ENDPOINT1); |
| } |
| |
| if (!word_available) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmiBufferReceive FIFO empty\n")); |
| return A_ERROR; |
| } |
| } |
| |
| #define CONSERVATIVE_BMI_READ 0 |
| #if CONSERVATIVE_BMI_READ |
| /* |
| * This is an extra-conservative CREDIT check. It guarantees |
| * that ALL data is available in the FIFO before we start to |
| * read from the interconnect. |
| * |
| * This credit check is useless when firmware chooses to |
| * allow multiple outstanding BMI Command Credits, since the next |
| * credit will already be present. To restrict the Target to one |
| * BMI Command Credit, see HI_OPTION_BMI_CRED_LIMIT. |
| * |
| * And for large reads (when HI_OPTION_BMI_CRED_LIMIT is set) |
| * we cannot wait for the next credit because the Target's FIFO |
| * will not hold the entire response. So we need the Host to |
| * start to empty the FIFO sooner. (And again, large reads are |
| * not used in practice; they are for debug/development only.) |
| * |
| * For a more conservative Host implementation (which would be |
| * safer for a Compact Flash interconnect): |
| * Set CONSERVATIVE_BMI_READ (above) to 1 |
| * Set HI_OPTION_BMI_CRED_LIMIT and |
| * reduce BMI_DATASZ_MAX to 32 or 64 |
| */ |
| if ((length > 4) && (length < 128)) { /* check against MBOX FIFO size */ |
| u32 timeout; |
| |
| *pBMICmdCredits = 0; |
| timeout = BMI_COMMUNICATION_TIMEOUT; |
| while((!want_timeout || timeout--) && !(*pBMICmdCredits) { |
| /* Read the counter register to get the command credits */ |
| address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1; |
| /* read the counter using a 4-byte read. Since the counter is NOT auto-decrementing, |
| * we can read this counter multiple times using a non-incrementing address mode. |
| * The rationale here is to make all HIF accesses a multiple of 4 bytes */ |
| status = HIFReadWrite(device, address, (u8 *)pBMICmdCredits, sizeof(*pBMICmdCredits), |
| HIF_RD_SYNC_BYTE_FIX, NULL); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n")); |
| return A_ERROR; |
| } |
| /* we did a 4-byte read to the same count register so mask off upper bytes */ |
| (*pBMICmdCredits) &= 0xFF; |
| } |
| |
| if (!(*pBMICmdCredits)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout- bmiBufferReceive no credit\n")); |
| return A_ERROR; |
| } |
| } |
| #endif |
| |
| address = mboxAddress[ENDPOINT1]; |
| status = HIFReadWrite(device, address, buffer, length, HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n")); |
| return A_ERROR; |
| } |
| |
| return 0; |
| } |
| |
| int |
| BMIFastDownload(HIF_DEVICE *device, u32 address, u8 *buffer, u32 length) |
| { |
| int status = A_ERROR; |
| u32 lastWord = 0; |
| u32 lastWordOffset = length & ~0x3; |
| u32 unalignedBytes = length & 0x3; |
| |
| status = BMILZStreamStart (device, address); |
| if (status) { |
| return A_ERROR; |
| } |
| |
| if (unalignedBytes) { |
| /* copy the last word into a zero padded buffer */ |
| memcpy(&lastWord, &buffer[lastWordOffset], unalignedBytes); |
| } |
| |
| status = BMILZData(device, buffer, lastWordOffset); |
| |
| if (status) { |
| return A_ERROR; |
| } |
| |
| if (unalignedBytes) { |
| status = BMILZData(device, (u8 *)&lastWord, 4); |
| } |
| |
| if (!status) { |
| // |
| // Close compressed stream and open a new (fake) one. This serves mainly to flush Target caches. |
| // |
| status = BMILZStreamStart (device, 0x00); |
| if (status) { |
| return A_ERROR; |
| } |
| } |
| return status; |
| } |
| |
| int |
| BMIRawWrite(HIF_DEVICE *device, u8 *buffer, u32 length) |
| { |
| return bmiBufferSend(device, buffer, length); |
| } |
| |
| int |
| BMIRawRead(HIF_DEVICE *device, u8 *buffer, u32 length, bool want_timeout) |
| { |
| return bmiBufferReceive(device, buffer, length, want_timeout); |
| } |