| /* |
| * xfrm6_policy.c: based on xfrm4_policy.c |
| * |
| * Authors: |
| * Mitsuru KANDA @USAGI |
| * Kazunori MIYAZAWA @USAGI |
| * Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| * IPv6 support |
| * YOSHIFUJI Hideaki |
| * Split up af-specific portion |
| * |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <net/addrconf.h> |
| #include <net/dst.h> |
| #include <net/xfrm.h> |
| #include <net/ip.h> |
| #include <net/ipv6.h> |
| #include <net/ip6_route.h> |
| #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) |
| #include <net/mip6.h> |
| #endif |
| |
| static struct xfrm_policy_afinfo xfrm6_policy_afinfo; |
| |
| static struct dst_entry *xfrm6_dst_lookup(struct net *net, int tos, |
| xfrm_address_t *saddr, |
| xfrm_address_t *daddr) |
| { |
| struct flowi fl = {}; |
| struct dst_entry *dst; |
| int err; |
| |
| memcpy(&fl.fl6_dst, daddr, sizeof(fl.fl6_dst)); |
| if (saddr) |
| memcpy(&fl.fl6_src, saddr, sizeof(fl.fl6_src)); |
| |
| dst = ip6_route_output(net, NULL, &fl); |
| |
| err = dst->error; |
| if (dst->error) { |
| dst_release(dst); |
| dst = ERR_PTR(err); |
| } |
| |
| return dst; |
| } |
| |
| static int xfrm6_get_saddr(struct net *net, |
| xfrm_address_t *saddr, xfrm_address_t *daddr) |
| { |
| struct dst_entry *dst; |
| struct net_device *dev; |
| |
| dst = xfrm6_dst_lookup(net, 0, NULL, daddr); |
| if (IS_ERR(dst)) |
| return -EHOSTUNREACH; |
| |
| dev = ip6_dst_idev(dst)->dev; |
| ipv6_dev_get_saddr(dev_net(dev), dev, |
| (struct in6_addr *)&daddr->a6, 0, |
| (struct in6_addr *)&saddr->a6); |
| dst_release(dst); |
| return 0; |
| } |
| |
| static int xfrm6_get_tos(struct flowi *fl) |
| { |
| return 0; |
| } |
| |
| static int xfrm6_init_path(struct xfrm_dst *path, struct dst_entry *dst, |
| int nfheader_len) |
| { |
| if (dst->ops->family == AF_INET6) { |
| struct rt6_info *rt = (struct rt6_info*)dst; |
| if (rt->rt6i_node) |
| path->path_cookie = rt->rt6i_node->fn_sernum; |
| } |
| |
| path->u.rt6.rt6i_nfheader_len = nfheader_len; |
| |
| return 0; |
| } |
| |
| static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev, |
| struct flowi *fl) |
| { |
| struct rt6_info *rt = (struct rt6_info*)xdst->route; |
| |
| xdst->u.dst.dev = dev; |
| dev_hold(dev); |
| |
| xdst->u.rt6.rt6i_idev = in6_dev_get(dev); |
| if (!xdst->u.rt6.rt6i_idev) |
| return -ENODEV; |
| |
| /* Sheit... I remember I did this right. Apparently, |
| * it was magically lost, so this code needs audit */ |
| xdst->u.rt6.rt6i_flags = rt->rt6i_flags & (RTF_ANYCAST | |
| RTF_LOCAL); |
| xdst->u.rt6.rt6i_metric = rt->rt6i_metric; |
| xdst->u.rt6.rt6i_node = rt->rt6i_node; |
| if (rt->rt6i_node) |
| xdst->route_cookie = rt->rt6i_node->fn_sernum; |
| xdst->u.rt6.rt6i_gateway = rt->rt6i_gateway; |
| xdst->u.rt6.rt6i_dst = rt->rt6i_dst; |
| xdst->u.rt6.rt6i_src = rt->rt6i_src; |
| |
| return 0; |
| } |
| |
| static inline void |
| _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse) |
| { |
| int onlyproto = 0; |
| u16 offset = skb_network_header_len(skb); |
| struct ipv6hdr *hdr = ipv6_hdr(skb); |
| struct ipv6_opt_hdr *exthdr; |
| const unsigned char *nh = skb_network_header(skb); |
| u8 nexthdr = nh[IP6CB(skb)->nhoff]; |
| |
| memset(fl, 0, sizeof(struct flowi)); |
| fl->mark = skb->mark; |
| |
| ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr); |
| ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr); |
| |
| while (nh + offset + 1 < skb->data || |
| pskb_may_pull(skb, nh + offset + 1 - skb->data)) { |
| nh = skb_network_header(skb); |
| exthdr = (struct ipv6_opt_hdr *)(nh + offset); |
| |
| switch (nexthdr) { |
| case NEXTHDR_FRAGMENT: |
| onlyproto = 1; |
| case NEXTHDR_ROUTING: |
| case NEXTHDR_HOP: |
| case NEXTHDR_DEST: |
| offset += ipv6_optlen(exthdr); |
| nexthdr = exthdr->nexthdr; |
| exthdr = (struct ipv6_opt_hdr *)(nh + offset); |
| break; |
| |
| case IPPROTO_UDP: |
| case IPPROTO_UDPLITE: |
| case IPPROTO_TCP: |
| case IPPROTO_SCTP: |
| case IPPROTO_DCCP: |
| if (!onlyproto && (nh + offset + 4 < skb->data || |
| pskb_may_pull(skb, nh + offset + 4 - skb->data))) { |
| __be16 *ports = (__be16 *)exthdr; |
| |
| fl->fl_ip_sport = ports[!!reverse]; |
| fl->fl_ip_dport = ports[!reverse]; |
| } |
| fl->proto = nexthdr; |
| return; |
| |
| case IPPROTO_ICMPV6: |
| if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) { |
| u8 *icmp = (u8 *)exthdr; |
| |
| fl->fl_icmp_type = icmp[0]; |
| fl->fl_icmp_code = icmp[1]; |
| } |
| fl->proto = nexthdr; |
| return; |
| |
| #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) |
| case IPPROTO_MH: |
| if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) { |
| struct ip6_mh *mh; |
| mh = (struct ip6_mh *)exthdr; |
| |
| fl->fl_mh_type = mh->ip6mh_type; |
| } |
| fl->proto = nexthdr; |
| return; |
| #endif |
| |
| /* XXX Why are there these headers? */ |
| case IPPROTO_AH: |
| case IPPROTO_ESP: |
| case IPPROTO_COMP: |
| default: |
| fl->fl_ipsec_spi = 0; |
| fl->proto = nexthdr; |
| return; |
| } |
| } |
| } |
| |
| static inline int xfrm6_garbage_collect(struct dst_ops *ops) |
| { |
| struct net *net = container_of(ops, struct net, xfrm.xfrm6_dst_ops); |
| |
| xfrm6_policy_afinfo.garbage_collect(net); |
| return dst_entries_get_fast(ops) > ops->gc_thresh * 2; |
| } |
| |
| static void xfrm6_update_pmtu(struct dst_entry *dst, u32 mtu) |
| { |
| struct xfrm_dst *xdst = (struct xfrm_dst *)dst; |
| struct dst_entry *path = xdst->route; |
| |
| path->ops->update_pmtu(path, mtu); |
| } |
| |
| static void xfrm6_dst_destroy(struct dst_entry *dst) |
| { |
| struct xfrm_dst *xdst = (struct xfrm_dst *)dst; |
| |
| if (likely(xdst->u.rt6.rt6i_idev)) |
| in6_dev_put(xdst->u.rt6.rt6i_idev); |
| xfrm_dst_destroy(xdst); |
| } |
| |
| static void xfrm6_dst_ifdown(struct dst_entry *dst, struct net_device *dev, |
| int unregister) |
| { |
| struct xfrm_dst *xdst; |
| |
| if (!unregister) |
| return; |
| |
| xdst = (struct xfrm_dst *)dst; |
| if (xdst->u.rt6.rt6i_idev->dev == dev) { |
| struct inet6_dev *loopback_idev = |
| in6_dev_get(dev_net(dev)->loopback_dev); |
| BUG_ON(!loopback_idev); |
| |
| do { |
| in6_dev_put(xdst->u.rt6.rt6i_idev); |
| xdst->u.rt6.rt6i_idev = loopback_idev; |
| in6_dev_hold(loopback_idev); |
| xdst = (struct xfrm_dst *)xdst->u.dst.child; |
| } while (xdst->u.dst.xfrm); |
| |
| __in6_dev_put(loopback_idev); |
| } |
| |
| xfrm_dst_ifdown(dst, dev); |
| } |
| |
| static struct dst_ops xfrm6_dst_ops = { |
| .family = AF_INET6, |
| .protocol = cpu_to_be16(ETH_P_IPV6), |
| .gc = xfrm6_garbage_collect, |
| .update_pmtu = xfrm6_update_pmtu, |
| .destroy = xfrm6_dst_destroy, |
| .ifdown = xfrm6_dst_ifdown, |
| .local_out = __ip6_local_out, |
| .gc_thresh = 1024, |
| }; |
| |
| static struct xfrm_policy_afinfo xfrm6_policy_afinfo = { |
| .family = AF_INET6, |
| .dst_ops = &xfrm6_dst_ops, |
| .dst_lookup = xfrm6_dst_lookup, |
| .get_saddr = xfrm6_get_saddr, |
| .decode_session = _decode_session6, |
| .get_tos = xfrm6_get_tos, |
| .init_path = xfrm6_init_path, |
| .fill_dst = xfrm6_fill_dst, |
| }; |
| |
| static int __init xfrm6_policy_init(void) |
| { |
| return xfrm_policy_register_afinfo(&xfrm6_policy_afinfo); |
| } |
| |
| static void xfrm6_policy_fini(void) |
| { |
| xfrm_policy_unregister_afinfo(&xfrm6_policy_afinfo); |
| } |
| |
| #ifdef CONFIG_SYSCTL |
| static struct ctl_table xfrm6_policy_table[] = { |
| { |
| .procname = "xfrm6_gc_thresh", |
| .data = &init_net.xfrm.xfrm6_dst_ops.gc_thresh, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec, |
| }, |
| { } |
| }; |
| |
| static struct ctl_table_header *sysctl_hdr; |
| #endif |
| |
| int __init xfrm6_init(void) |
| { |
| int ret; |
| unsigned int gc_thresh; |
| |
| /* |
| * We need a good default value for the xfrm6 gc threshold. |
| * In ipv4 we set it to the route hash table size * 8, which |
| * is half the size of the maximaum route cache for ipv4. It |
| * would be good to do the same thing for v6, except the table is |
| * constructed differently here. Here each table for a net namespace |
| * can have FIB_TABLE_HASHSZ entries, so lets go with the same |
| * computation that we used for ipv4 here. Also, lets keep the initial |
| * gc_thresh to a minimum of 1024, since, the ipv6 route cache defaults |
| * to that as a minimum as well |
| */ |
| gc_thresh = FIB6_TABLE_HASHSZ * 8; |
| xfrm6_dst_ops.gc_thresh = (gc_thresh < 1024) ? 1024 : gc_thresh; |
| dst_entries_init(&xfrm6_dst_ops); |
| |
| ret = xfrm6_policy_init(); |
| if (ret) { |
| dst_entries_destroy(&xfrm6_dst_ops); |
| goto out; |
| } |
| ret = xfrm6_state_init(); |
| if (ret) |
| goto out_policy; |
| |
| #ifdef CONFIG_SYSCTL |
| sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv6_ctl_path, |
| xfrm6_policy_table); |
| #endif |
| out: |
| return ret; |
| out_policy: |
| xfrm6_policy_fini(); |
| goto out; |
| } |
| |
| void xfrm6_fini(void) |
| { |
| #ifdef CONFIG_SYSCTL |
| if (sysctl_hdr) |
| unregister_net_sysctl_table(sysctl_hdr); |
| #endif |
| //xfrm6_input_fini(); |
| xfrm6_policy_fini(); |
| xfrm6_state_fini(); |
| dst_entries_destroy(&xfrm6_dst_ops); |
| } |