| /* |
| * Lite5200B board Device Tree Source |
| * |
| * Copyright 2006-2007 Secret Lab Technologies Ltd. |
| * Grant Likely <grant.likely@secretlab.ca> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "fsl,lite5200b"; |
| compatible = "fsl,lite5200b"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&mpc5200_pic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,5200@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <32>; |
| i-cache-line-size = <32>; |
| d-cache-size = <0x4000>; // L1, 16K |
| i-cache-size = <0x4000>; // L1, 16K |
| timebase-frequency = <0>; // from bootloader |
| bus-frequency = <0>; // from bootloader |
| clock-frequency = <0>; // from bootloader |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; // 256MB |
| }; |
| |
| soc5200@f0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc5200b-immr"; |
| ranges = <0 0xf0000000 0x0000c000>; |
| reg = <0xf0000000 0x00000100>; |
| bus-frequency = <0>; // from bootloader |
| system-frequency = <0>; // from bootloader |
| |
| cdm@200 { |
| compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; |
| reg = <0x200 0x38>; |
| }; |
| |
| mpc5200_pic: interrupt-controller@500 { |
| // 5200 interrupts are encoded into two levels; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; |
| reg = <0x500 0x80>; |
| }; |
| |
| timer@600 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x600 0x10>; |
| interrupts = <1 9 0>; |
| fsl,has-wdt; |
| }; |
| |
| timer@610 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x610 0x10>; |
| interrupts = <1 10 0>; |
| }; |
| |
| timer@620 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x620 0x10>; |
| interrupts = <1 11 0>; |
| }; |
| |
| timer@630 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x630 0x10>; |
| interrupts = <1 12 0>; |
| }; |
| |
| timer@640 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x640 0x10>; |
| interrupts = <1 13 0>; |
| }; |
| |
| timer@650 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x650 0x10>; |
| interrupts = <1 14 0>; |
| }; |
| |
| timer@660 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x660 0x10>; |
| interrupts = <1 15 0>; |
| }; |
| |
| timer@670 { // General Purpose Timer |
| compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| reg = <0x670 0x10>; |
| interrupts = <1 16 0>; |
| }; |
| |
| rtc@800 { // Real time clock |
| compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; |
| reg = <0x800 0x100>; |
| interrupts = <1 5 0 1 6 0>; |
| }; |
| |
| can@900 { |
| compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; |
| interrupts = <2 17 0>; |
| reg = <0x900 0x80>; |
| }; |
| |
| can@980 { |
| compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; |
| interrupts = <2 18 0>; |
| reg = <0x980 0x80>; |
| }; |
| |
| gpio_simple: gpio@b00 { |
| compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; |
| reg = <0xb00 0x40>; |
| interrupts = <1 7 0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpio_wkup: gpio@c00 { |
| compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; |
| reg = <0xc00 0x40>; |
| interrupts = <1 8 0 0 3 0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| spi@f00 { |
| compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; |
| reg = <0xf00 0x20>; |
| interrupts = <2 13 0 2 14 0>; |
| }; |
| |
| usb@1000 { |
| compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; |
| reg = <0x1000 0xff>; |
| interrupts = <2 6 0>; |
| }; |
| |
| dma-controller@1200 { |
| compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; |
| reg = <0x1200 0x80>; |
| interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 |
| 3 4 0 3 5 0 3 6 0 3 7 0 |
| 3 8 0 3 9 0 3 10 0 3 11 0 |
| 3 12 0 3 13 0 3 14 0 3 15 0>; |
| }; |
| |
| xlb@1f00 { |
| compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; |
| reg = <0x1f00 0x100>; |
| }; |
| |
| serial@2000 { // PSC1 |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| cell-index = <0>; |
| reg = <0x2000 0x100>; |
| interrupts = <2 1 0>; |
| }; |
| |
| // PSC2 in ac97 mode example |
| //ac97@2200 { // PSC2 |
| // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; |
| // cell-index = <1>; |
| // reg = <0x2200 0x100>; |
| // interrupts = <2 2 0>; |
| //}; |
| |
| // PSC3 in CODEC mode example |
| //i2s@2400 { // PSC3 |
| // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible |
| // cell-index = <2>; |
| // reg = <0x2400 0x100>; |
| // interrupts = <2 3 0>; |
| //}; |
| |
| // PSC4 in uart mode example |
| //serial@2600 { // PSC4 |
| // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| // cell-index = <3>; |
| // reg = <0x2600 0x100>; |
| // interrupts = <2 11 0>; |
| //}; |
| |
| // PSC5 in uart mode example |
| //serial@2800 { // PSC5 |
| // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| // cell-index = <4>; |
| // reg = <0x2800 0x100>; |
| // interrupts = <2 12 0>; |
| //}; |
| |
| // PSC6 in spi mode example |
| //spi@2c00 { // PSC6 |
| // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; |
| // cell-index = <5>; |
| // reg = <0x2c00 0x100>; |
| // interrupts = <2 4 0>; |
| //}; |
| |
| ethernet@3000 { |
| compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; |
| reg = <0x3000 0x400>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <2 5 0>; |
| phy-handle = <&phy0>; |
| }; |
| |
| mdio@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; |
| reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts |
| interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. |
| |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| ata@3a00 { |
| compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; |
| reg = <0x3a00 0x100>; |
| interrupts = <2 7 0>; |
| }; |
| |
| i2c@3d00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; |
| reg = <0x3d00 0x40>; |
| interrupts = <2 15 0>; |
| }; |
| |
| i2c@3d40 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; |
| reg = <0x3d40 0x40>; |
| interrupts = <2 16 0>; |
| }; |
| |
| sram@8000 { |
| compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; |
| reg = <0x8000 0x4000>; |
| }; |
| }; |
| |
| pci@f0000d00 { |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; |
| reg = <0xf0000d00 0x100>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot |
| 0xc000 0 0 2 &mpc5200_pic 1 1 3 |
| 0xc000 0 0 3 &mpc5200_pic 1 2 3 |
| 0xc000 0 0 4 &mpc5200_pic 1 3 3 |
| |
| 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot |
| 0xc800 0 0 2 &mpc5200_pic 1 2 3 |
| 0xc800 0 0 3 &mpc5200_pic 1 3 3 |
| 0xc800 0 0 4 &mpc5200_pic 0 0 3>; |
| clock-frequency = <0>; // From boot loader |
| interrupts = <2 8 0 2 9 0 2 10 0>; |
| bus-range = <0 0>; |
| ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 |
| 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; |
| }; |
| |
| localbus { |
| compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; |
| |
| #address-cells = <2>; |
| #size-cells = <1>; |
| |
| ranges = <0 0 0xfe000000 0x02000000>; |
| |
| flash@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0 0x02000000>; |
| bank-width = <1>; |
| #size-cells = <1>; |
| #address-cells = <1>; |
| |
| partition@0 { |
| label = "kernel"; |
| reg = <0x00000000 0x00200000>; |
| }; |
| partition@200000 { |
| label = "rootfs"; |
| reg = <0x00200000 0x01d00000>; |
| }; |
| partition@1f00000 { |
| label = "u-boot"; |
| reg = <0x01f00000 0x00060000>; |
| }; |
| partition@1f60000 { |
| label = "u-boot-env"; |
| reg = <0x01f60000 0x00020000>; |
| }; |
| partition@1f80000 { |
| label = "dtb"; |
| reg = <0x01f80000 0x00080000>; |
| }; |
| }; |
| }; |
| |
| }; |