| /* usb1401.h |
| Header file for the CED 1401 USB device driver for Linux |
| Copyright (C) 2010 Cambridge Electronic Design Ltd |
| Author Greg P Smith (greg@ced.co.uk) |
| |
| This program is free software; you can redistribute it and/or |
| modify it under the terms of the GNU General Public License |
| as published by the Free Software Foundation; either version 2 |
| of the License, or (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| #ifndef __USB1401_H__ |
| #define __USB1401_H__ |
| #include "use1401.h" |
| #include "ced_ioctl.h" |
| |
| #ifndef UINT |
| #define UINT unsigned int |
| #endif |
| |
| /** Device type codes, but these don't need to be extended - a succession is assumed |
| ** These are set for usb from the bcdDevice field (suitably mangled). Future devices |
| ** will be added in order of device creation to the list, so the names here are just |
| ** to help use remember which device is which. The U14ERR_... values follow the same |
| ** pattern for modern devices.a |
| **/ |
| #define TYPEUNKNOWN -1 /* dont know */ |
| #define TYPE1401 0 /* standard 1401 */ |
| #define TYPEPLUS 1 /* 1401 plus */ |
| #define TYPEU1401 2 /* u1401 */ |
| #define TYPEPOWER 3 /* Power1401 */ |
| #define TYPEU14012 4 /* u1401 mkII */ |
| #define TYPEPOWER2 5 /* Power1401 mk II */ |
| #define TYPEMICRO3 6 /* Micro1401-3 */ |
| #define TYPEPOWER3 7 /* Power1401-3 */ |
| |
| /* Some useful defines of constants. DONT FORGET to change the version in the */ |
| /* resources whenever you change it here!. */ |
| #define DRIVERMAJREV 2 /* driver revision level major (match windows) */ |
| #define DRIVERMINREV 0 /* driver revision level minor */ |
| |
| /* Definitions of the various block transfer command codes */ |
| #define TM_EXTTOHOST 8 /* extended tohost */ |
| #define TM_EXTTO1401 9 /* extended to1401 */ |
| |
| /* Definitions of values in usbReqtype. Used in sorting out setup actions */ |
| #define H_TO_D 0x00 |
| #define D_TO_H 0x80 |
| #define VENDOR 0x40 |
| #define DEVREQ 0x00 |
| #define INTREQ 0x01 |
| #define ENDREQ 0x02 |
| |
| /* Definition of values in usbRequest, again used to sort out setup */ |
| #define GET_STATUS 0x00 |
| #define CLEAR_FEATURE 0x01 |
| #define SET_FEATURE 0x03 |
| #define SET_ADDRESS 0x05 |
| #define GET_DESC 0x06 |
| #define SET_DESC 0x07 |
| #define GET_CONF 0x08 |
| #define SET_CONF 0x09 |
| #define GET_INTERFACE 0x0a |
| #define SET_INTERFACE 0x0b |
| #define SYNCH_FRAME 0x0c |
| |
| /* Definitions of the various debug command codes understood by the 1401. These */ |
| /* are used in various vendor-specific commands to achieve the desired effect */ |
| #define DB_GRAB 0x50 /* Grab is a NOP for USB */ |
| #define DB_FREE 0x51 /* Free is a NOP for the USB */ |
| #define DB_SETADD 0x52 /* Set debug address (double) */ |
| #define DB_SELFTEST 0x53 /* Start self test */ |
| #define DB_SETMASK 0x54 /* Set enable mask (double) */ |
| #define DB_SETDEF 0x55 /* Set default mask (double) */ |
| #define DB_PEEK 0x56 /* Peek address, save result */ |
| #define DB_POKE 0x57 /* Poke address with data (double) */ |
| #define DB_RAMPD 0x58 /* Ramp data at debug address */ |
| #define DB_RAMPA 0x59 /* Ramp address bus */ |
| #define DB_REPEATS 0x5A /* Set repeats for operations (double) */ |
| #define DB_WIDTH 0x5B /* Set width for operations (byte) */ |
| #define DB_DATA 0x5C /* Get 4-byte data read by PEEK */ |
| #define DB_CHARS 0x5D /* Send chars via EP0 control write */ |
| |
| #define CR_CHAR 0x0D /* The carriage return character */ |
| #define CR_CHAR_80 0x8d /* and with bit 7 set */ |
| |
| /* A structure holding information about a block of memory for use in circular transfers */ |
| typedef struct circBlk |
| { |
| volatile UINT dwOffset; /* Offset within area of block start */ |
| volatile UINT dwSize; /* Size of the block, in bytes (0 = unused) */ |
| } CIRCBLK; |
| |
| /* A structure holding all of the information about a transfer area - an area of */ |
| /* memory set up for use either as a source or destination in DMA transfers. */ |
| typedef struct transarea |
| { |
| void *lpvBuff; /* User address of xfer area saved for completeness */ |
| UINT dwBaseOffset; /* offset to start of xfer area in first page */ |
| UINT dwLength; /* Length of xfer area, in bytes */ |
| struct page **pPages; /* Points at array of locked down pages */ |
| int nPages; /* number of pages that are locked down */ |
| bool bUsed; /* Is this structure in use? */ |
| bool bCircular; /* Is this area for circular transfers? */ |
| bool bCircToHost; /* Flag for direction of circular transfer */ |
| bool bEventToHost; /* Set event on transfer to host? */ |
| int iWakeUp; /* Set 1 on event, cleared by TestEvent() */ |
| UINT dwEventSt; /* Defines section within xfer area for... */ |
| UINT dwEventSz; /* ...notification by the event SZ is 0 if unset */ |
| CIRCBLK aBlocks[2]; /* Info on a pair of circular blocks */ |
| wait_queue_head_t wqEvent; /* The wait queue for events in this area MUST BE LAST */ |
| } TRANSAREA; |
| |
| /* The DMADESC structure is used to hold information on the transfer in progress. It */ |
| /* is set up by ReadDMAInfo, using information sent by the 1401 in an escape sequence. */ |
| typedef struct dmadesc |
| { |
| unsigned short wTransType; /* transfer type as TM_xxx above */ |
| unsigned short wIdent; /* identifier word */ |
| unsigned int dwSize; /* bytes to transfer */ |
| unsigned int dwOffset; /* offset into transfer area for trans */ |
| bool bOutWard; /* true when data is going TO 1401 */ |
| } DMADESC; |
| |
| #define INBUF_SZ 256 /* input buffer size */ |
| #define OUTBUF_SZ 256 /* output buffer size */ |
| #define STAGED_SZ 0x10000 /* size of coherent buffer for staged transfers */ |
| |
| /* Structure to hold all of our device specific stuff. We are making this as similar as we */ |
| /* can to the Windows driver to help in our understanding of what is going on. */ |
| typedef struct _DEVICE_EXTENSION |
| { |
| char inputBuffer[INBUF_SZ]; /* The two buffers */ |
| char outputBuffer[OUTBUF_SZ]; /* accessed by the host functions */ |
| volatile unsigned int dwNumInput; /* num of chars in input buffer */ |
| volatile unsigned int dwInBuffGet; /* where to get from input buffer */ |
| volatile unsigned int dwInBuffPut; /* where to put into input buffer */ |
| volatile unsigned int dwNumOutput; /* num of chars in output buffer */ |
| volatile unsigned int dwOutBuffGet; /* where to get from output buffer*/ |
| volatile unsigned int dwOutBuffPut; /* where to put into output buffer*/ |
| |
| volatile bool bSendCharsPending; /* Flag to indicate sendchar active */ |
| volatile bool bReadCharsPending; /* Flag to indicate a read is primed */ |
| char *pCoherCharOut; /* special aligned buffer for chars to 1401 */ |
| struct urb *pUrbCharOut; /* urb used for chars to 1401 */ |
| char *pCoherCharIn; /* special aligned buffer for chars to host */ |
| struct urb *pUrbCharIn; /* urb used for chars to host */ |
| |
| spinlock_t charOutLock; /* to protect the outputBuffer and outputting */ |
| spinlock_t charInLock; /* to protect the inputBuffer and char reads */ |
| __u8 bInterval; /* Interrupt end point interval */ |
| |
| volatile unsigned int dwDMAFlag; /* state of DMA */ |
| TRANSAREA rTransDef[MAX_TRANSAREAS];/* transfer area info */ |
| volatile DMADESC rDMAInfo; /* info on current DMA transfer */ |
| volatile bool bXFerWaiting; /* Flag set if DMA transfer stalled */ |
| volatile bool bInDrawDown; /* Flag that we want to halt transfers */ |
| |
| /* Parameters relating to a block read\write that is in progress. Some of these values */ |
| /* are equivalent to values in rDMAInfo. The values here are those in use, while those */ |
| /* in rDMAInfo are those received from the 1401 via an escape sequence. If another */ |
| /* escape sequence arrives before the previous xfer ends, rDMAInfo values are updated while these */ |
| /* are used to finish off the current transfer. */ |
| volatile short StagedId; /* The transfer area id for this transfer */ |
| volatile bool StagedRead; /* Flag TRUE for read from 1401, FALSE for write */ |
| volatile unsigned int StagedLength; /* Total length of this transfer */ |
| volatile unsigned int StagedOffset; /* Offset within memory area for transfer start */ |
| volatile unsigned int StagedDone; /* Bytes transferred so far */ |
| volatile bool bStagedUrbPending; /* Flag to indicate active */ |
| char *pCoherStagedIO; /* buffer used for block transfers */ |
| struct urb *pStagedUrb; /* The URB to use */ |
| spinlock_t stagedLock; /* protects ReadWriteMem() and circular buffer stuff */ |
| |
| short s1401Type; /* type of 1401 attached */ |
| short sCurrentState; /* current error state */ |
| bool bIsUSB2; /* type of the interface we connect to */ |
| bool bForceReset; /* Flag to make sure we get a real reset */ |
| __u32 statBuf[2]; /* buffer for 1401 state info */ |
| |
| unsigned long ulSelfTestTime; /* used to timeout self test */ |
| |
| int nPipes; /* Should be 3 or 4 depending on 1401 usb chip */ |
| int bPipeError[4]; /* set non-zero if an error on one of the pipe */ |
| __u8 epAddr[4]; /* addresses of the 3/4 end points */ |
| |
| struct usb_device *udev; /* the usb device for this device */ |
| struct usb_interface *interface; /* the interface for this device, NULL if removed */ |
| struct usb_anchor submitted; /* in case we need to retract our submissions */ |
| struct mutex io_mutex; /* synchronize I/O with disconnect, one user-mode caller at a time */ |
| |
| int errors; /* the last request tanked */ |
| int open_count; /* count the number of openers */ |
| spinlock_t err_lock; /* lock for errors */ |
| struct kref kref; |
| } DEVICE_EXTENSION, *PDEVICE_EXTENSION; |
| #define to_DEVICE_EXTENSION(d) container_of(d, DEVICE_EXTENSION, kref) |
| |
| /* Definitions of routimes used between compilation object files */ |
| /* in usb1401.c */ |
| extern int Allowi(DEVICE_EXTENSION *pdx); |
| extern int SendChars(DEVICE_EXTENSION *pdx); |
| extern void ced_draw_down(DEVICE_EXTENSION *pdx); |
| extern int ReadWriteMem(DEVICE_EXTENSION *pdx, bool Read, unsigned short wIdent, |
| unsigned int dwOffs, unsigned int dwLen); |
| |
| /* in ced_ioc.c */ |
| extern int ClearArea(DEVICE_EXTENSION *pdx, int nArea); |
| extern int SendString(DEVICE_EXTENSION *pdx, const char __user *pData, unsigned int n); |
| extern int SendChar(DEVICE_EXTENSION *pdx, char c); |
| extern int Get1401State(DEVICE_EXTENSION *pdx, __u32 *state, __u32 *error); |
| extern int ReadWrite_Cancel(DEVICE_EXTENSION *pdx); |
| extern bool Is1401(DEVICE_EXTENSION *pdx); |
| extern bool QuickCheck(DEVICE_EXTENSION *pdx, bool bTestBuff, bool bCanReset); |
| extern int Reset1401(DEVICE_EXTENSION *pdx); |
| extern int GetChar(DEVICE_EXTENSION *pdx); |
| extern int GetString(DEVICE_EXTENSION *pdx, char __user *pUser, int n); |
| extern int SetTransfer(DEVICE_EXTENSION *pdx, TRANSFERDESC __user *pTD); |
| extern int UnsetTransfer(DEVICE_EXTENSION *pdx, int nArea); |
| extern int SetEvent(DEVICE_EXTENSION *pdx, TRANSFEREVENT __user *pTE); |
| extern int Stat1401(DEVICE_EXTENSION *pdx); |
| extern int LineCount(DEVICE_EXTENSION *pdx); |
| extern int GetOutBufSpace(DEVICE_EXTENSION *pdx); |
| extern int GetTransfer(DEVICE_EXTENSION *pdx, TGET_TX_BLOCK __user *pGTB); |
| extern int KillIO1401(DEVICE_EXTENSION *pdx); |
| extern int BlkTransState(DEVICE_EXTENSION *pdx); |
| extern int StateOf1401(DEVICE_EXTENSION *pdx); |
| extern int StartSelfTest(DEVICE_EXTENSION *pdx); |
| extern int CheckSelfTest(DEVICE_EXTENSION *pdx, TGET_SELFTEST __user *pGST); |
| extern int TypeOf1401(DEVICE_EXTENSION *pdx); |
| extern int TransferFlags(DEVICE_EXTENSION *pdx); |
| extern int DbgPeek(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB); |
| extern int DbgPoke(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB); |
| extern int DbgRampData(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB); |
| extern int DbgRampAddr(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB); |
| extern int DbgGetData(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB); |
| extern int DbgStopLoop(DEVICE_EXTENSION *pdx); |
| extern int SetCircular(DEVICE_EXTENSION *pdx, TRANSFERDESC __user *pTD); |
| extern int GetCircBlock(DEVICE_EXTENSION *pdx, TCIRCBLOCK __user *pCB); |
| extern int FreeCircBlock(DEVICE_EXTENSION *pdx, TCIRCBLOCK __user *pCB); |
| extern int WaitEvent(DEVICE_EXTENSION *pdx, int nArea, int msTimeOut); |
| extern int TestEvent(DEVICE_EXTENSION *pdx, int nArea); |
| #endif |