| /* |
| |
| Broadcom B43 wireless driver |
| |
| Transmission (TX/RX) related functions. |
| |
| Copyright (C) 2005 Martin Langer <martin-langer@gmx.de> |
| Copyright (C) 2005 Stefano Brivio <stefano.brivio@polimi.it> |
| Copyright (C) 2005, 2006 Michael Buesch <mb@bu3sch.de> |
| Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org> |
| Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include "xmit.h" |
| #include "phy_common.h" |
| #include "dma.h" |
| #include "pio.h" |
| |
| |
| /* Extract the bitrate index out of a CCK PLCP header. */ |
| static int b43_plcp_get_bitrate_idx_cck(struct b43_plcp_hdr6 *plcp) |
| { |
| switch (plcp->raw[0]) { |
| case 0x0A: |
| return 0; |
| case 0x14: |
| return 1; |
| case 0x37: |
| return 2; |
| case 0x6E: |
| return 3; |
| } |
| return -1; |
| } |
| |
| /* Extract the bitrate index out of an OFDM PLCP header. */ |
| static int b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy) |
| { |
| int base = aphy ? 0 : 4; |
| |
| switch (plcp->raw[0] & 0xF) { |
| case 0xB: |
| return base + 0; |
| case 0xF: |
| return base + 1; |
| case 0xA: |
| return base + 2; |
| case 0xE: |
| return base + 3; |
| case 0x9: |
| return base + 4; |
| case 0xD: |
| return base + 5; |
| case 0x8: |
| return base + 6; |
| case 0xC: |
| return base + 7; |
| } |
| return -1; |
| } |
| |
| u8 b43_plcp_get_ratecode_cck(const u8 bitrate) |
| { |
| switch (bitrate) { |
| case B43_CCK_RATE_1MB: |
| return 0x0A; |
| case B43_CCK_RATE_2MB: |
| return 0x14; |
| case B43_CCK_RATE_5MB: |
| return 0x37; |
| case B43_CCK_RATE_11MB: |
| return 0x6E; |
| } |
| B43_WARN_ON(1); |
| return 0; |
| } |
| |
| u8 b43_plcp_get_ratecode_ofdm(const u8 bitrate) |
| { |
| switch (bitrate) { |
| case B43_OFDM_RATE_6MB: |
| return 0xB; |
| case B43_OFDM_RATE_9MB: |
| return 0xF; |
| case B43_OFDM_RATE_12MB: |
| return 0xA; |
| case B43_OFDM_RATE_18MB: |
| return 0xE; |
| case B43_OFDM_RATE_24MB: |
| return 0x9; |
| case B43_OFDM_RATE_36MB: |
| return 0xD; |
| case B43_OFDM_RATE_48MB: |
| return 0x8; |
| case B43_OFDM_RATE_54MB: |
| return 0xC; |
| } |
| B43_WARN_ON(1); |
| return 0; |
| } |
| |
| void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp, |
| const u16 octets, const u8 bitrate) |
| { |
| __u8 *raw = plcp->raw; |
| |
| if (b43_is_ofdm_rate(bitrate)) { |
| u32 d; |
| |
| d = b43_plcp_get_ratecode_ofdm(bitrate); |
| B43_WARN_ON(octets & 0xF000); |
| d |= (octets << 5); |
| plcp->data = cpu_to_le32(d); |
| } else { |
| u32 plen; |
| |
| plen = octets * 16 / bitrate; |
| if ((octets * 16 % bitrate) > 0) { |
| plen++; |
| if ((bitrate == B43_CCK_RATE_11MB) |
| && ((octets * 8 % 11) < 4)) { |
| raw[1] = 0x84; |
| } else |
| raw[1] = 0x04; |
| } else |
| raw[1] = 0x04; |
| plcp->data |= cpu_to_le32(plen << 16); |
| raw[0] = b43_plcp_get_ratecode_cck(bitrate); |
| } |
| } |
| |
| static u8 b43_calc_fallback_rate(u8 bitrate) |
| { |
| switch (bitrate) { |
| case B43_CCK_RATE_1MB: |
| return B43_CCK_RATE_1MB; |
| case B43_CCK_RATE_2MB: |
| return B43_CCK_RATE_1MB; |
| case B43_CCK_RATE_5MB: |
| return B43_CCK_RATE_2MB; |
| case B43_CCK_RATE_11MB: |
| return B43_CCK_RATE_5MB; |
| case B43_OFDM_RATE_6MB: |
| return B43_CCK_RATE_5MB; |
| case B43_OFDM_RATE_9MB: |
| return B43_OFDM_RATE_6MB; |
| case B43_OFDM_RATE_12MB: |
| return B43_OFDM_RATE_9MB; |
| case B43_OFDM_RATE_18MB: |
| return B43_OFDM_RATE_12MB; |
| case B43_OFDM_RATE_24MB: |
| return B43_OFDM_RATE_18MB; |
| case B43_OFDM_RATE_36MB: |
| return B43_OFDM_RATE_24MB; |
| case B43_OFDM_RATE_48MB: |
| return B43_OFDM_RATE_36MB; |
| case B43_OFDM_RATE_54MB: |
| return B43_OFDM_RATE_48MB; |
| } |
| B43_WARN_ON(1); |
| return 0; |
| } |
| |
| /* Generate a TX data header. */ |
| int b43_generate_txhdr(struct b43_wldev *dev, |
| u8 *_txhdr, |
| const unsigned char *fragment_data, |
| unsigned int fragment_len, |
| struct ieee80211_tx_info *info, |
| u16 cookie) |
| { |
| struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr; |
| const struct b43_phy *phy = &dev->phy; |
| const struct ieee80211_hdr *wlhdr = |
| (const struct ieee80211_hdr *)fragment_data; |
| int use_encryption = !!info->control.hw_key; |
| __le16 fctl = wlhdr->frame_control; |
| struct ieee80211_rate *fbrate; |
| u8 rate, rate_fb; |
| int rate_ofdm, rate_fb_ofdm; |
| unsigned int plcp_fragment_len; |
| u32 mac_ctl = 0; |
| u16 phy_ctl = 0; |
| u8 extra_ft = 0; |
| struct ieee80211_rate *txrate; |
| struct ieee80211_tx_rate *rates; |
| |
| memset(txhdr, 0, sizeof(*txhdr)); |
| |
| txrate = ieee80211_get_tx_rate(dev->wl->hw, info); |
| rate = txrate ? txrate->hw_value : B43_CCK_RATE_1MB; |
| rate_ofdm = b43_is_ofdm_rate(rate); |
| fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : txrate; |
| rate_fb = fbrate->hw_value; |
| rate_fb_ofdm = b43_is_ofdm_rate(rate_fb); |
| |
| if (rate_ofdm) |
| txhdr->phy_rate = b43_plcp_get_ratecode_ofdm(rate); |
| else |
| txhdr->phy_rate = b43_plcp_get_ratecode_cck(rate); |
| txhdr->mac_frame_ctl = wlhdr->frame_control; |
| memcpy(txhdr->tx_receiver, wlhdr->addr1, 6); |
| |
| /* Calculate duration for fallback rate */ |
| if ((rate_fb == rate) || |
| (wlhdr->duration_id & cpu_to_le16(0x8000)) || |
| (wlhdr->duration_id == cpu_to_le16(0))) { |
| /* If the fallback rate equals the normal rate or the |
| * dur_id field contains an AID, CFP magic or 0, |
| * use the original dur_id field. */ |
| txhdr->dur_fb = wlhdr->duration_id; |
| } else { |
| txhdr->dur_fb = ieee80211_generic_frame_duration( |
| dev->wl->hw, info->control.vif, fragment_len, fbrate); |
| } |
| |
| plcp_fragment_len = fragment_len + FCS_LEN; |
| if (use_encryption) { |
| u8 key_idx = info->control.hw_key->hw_key_idx; |
| struct b43_key *key; |
| int wlhdr_len; |
| size_t iv_len; |
| |
| B43_WARN_ON(key_idx >= dev->max_nr_keys); |
| key = &(dev->key[key_idx]); |
| |
| if (unlikely(!key->keyconf)) { |
| /* This key is invalid. This might only happen |
| * in a short timeframe after machine resume before |
| * we were able to reconfigure keys. |
| * Drop this packet completely. Do not transmit it |
| * unencrypted to avoid leaking information. */ |
| return -ENOKEY; |
| } |
| |
| /* Hardware appends ICV. */ |
| plcp_fragment_len += info->control.hw_key->icv_len; |
| |
| key_idx = b43_kidx_to_fw(dev, key_idx); |
| mac_ctl |= (key_idx << B43_TXH_MAC_KEYIDX_SHIFT) & |
| B43_TXH_MAC_KEYIDX; |
| mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) & |
| B43_TXH_MAC_KEYALG; |
| wlhdr_len = ieee80211_hdrlen(fctl); |
| iv_len = min((size_t) info->control.hw_key->iv_len, |
| ARRAY_SIZE(txhdr->iv)); |
| memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len); |
| } |
| if (b43_is_old_txhdr_format(dev)) { |
| b43_generate_plcp_hdr((struct b43_plcp_hdr4 *)(&txhdr->old_format.plcp), |
| plcp_fragment_len, rate); |
| } else { |
| b43_generate_plcp_hdr((struct b43_plcp_hdr4 *)(&txhdr->new_format.plcp), |
| plcp_fragment_len, rate); |
| } |
| b43_generate_plcp_hdr((struct b43_plcp_hdr4 *)(&txhdr->plcp_fb), |
| plcp_fragment_len, rate_fb); |
| |
| /* Extra Frame Types */ |
| if (rate_fb_ofdm) |
| extra_ft |= B43_TXH_EFT_FB_OFDM; |
| else |
| extra_ft |= B43_TXH_EFT_FB_CCK; |
| |
| /* Set channel radio code. Note that the micrcode ORs 0x100 to |
| * this value before comparing it to the value in SHM, if this |
| * is a 5Ghz packet. |
| */ |
| txhdr->chan_radio_code = phy->channel; |
| |
| /* PHY TX Control word */ |
| if (rate_ofdm) |
| phy_ctl |= B43_TXH_PHY_ENC_OFDM; |
| else |
| phy_ctl |= B43_TXH_PHY_ENC_CCK; |
| if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) |
| phy_ctl |= B43_TXH_PHY_SHORTPRMBL; |
| |
| switch (b43_ieee80211_antenna_sanitize(dev, info->antenna_sel_tx)) { |
| case 0: /* Default */ |
| phy_ctl |= B43_TXH_PHY_ANT01AUTO; |
| break; |
| case 1: /* Antenna 0 */ |
| phy_ctl |= B43_TXH_PHY_ANT0; |
| break; |
| case 2: /* Antenna 1 */ |
| phy_ctl |= B43_TXH_PHY_ANT1; |
| break; |
| case 3: /* Antenna 2 */ |
| phy_ctl |= B43_TXH_PHY_ANT2; |
| break; |
| case 4: /* Antenna 3 */ |
| phy_ctl |= B43_TXH_PHY_ANT3; |
| break; |
| default: |
| B43_WARN_ON(1); |
| } |
| |
| rates = info->control.rates; |
| /* MAC control */ |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) |
| mac_ctl |= B43_TXH_MAC_ACK; |
| /* use hardware sequence counter as the non-TID counter */ |
| if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) |
| mac_ctl |= B43_TXH_MAC_HWSEQ; |
| if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) |
| mac_ctl |= B43_TXH_MAC_STMSDU; |
| if (phy->type == B43_PHYTYPE_A) |
| mac_ctl |= B43_TXH_MAC_5GHZ; |
| |
| /* Overwrite rates[0].count to make the retry calculation |
| * in the tx status easier. need the actual retry limit to |
| * detect whether the fallback rate was used. |
| */ |
| if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || |
| (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) { |
| rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count; |
| mac_ctl |= B43_TXH_MAC_LONGFRAME; |
| } else { |
| rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count; |
| } |
| |
| /* Generate the RTS or CTS-to-self frame */ |
| if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || |
| (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) { |
| unsigned int len; |
| struct ieee80211_hdr *hdr; |
| int rts_rate, rts_rate_fb; |
| int rts_rate_ofdm, rts_rate_fb_ofdm; |
| struct b43_plcp_hdr6 *plcp; |
| struct ieee80211_rate *rts_cts_rate; |
| |
| rts_cts_rate = ieee80211_get_rts_cts_rate(dev->wl->hw, info); |
| |
| rts_rate = rts_cts_rate ? rts_cts_rate->hw_value : B43_CCK_RATE_1MB; |
| rts_rate_ofdm = b43_is_ofdm_rate(rts_rate); |
| rts_rate_fb = b43_calc_fallback_rate(rts_rate); |
| rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb); |
| |
| if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { |
| struct ieee80211_cts *cts; |
| |
| if (b43_is_old_txhdr_format(dev)) { |
| cts = (struct ieee80211_cts *) |
| (txhdr->old_format.rts_frame); |
| } else { |
| cts = (struct ieee80211_cts *) |
| (txhdr->new_format.rts_frame); |
| } |
| ieee80211_ctstoself_get(dev->wl->hw, info->control.vif, |
| fragment_data, fragment_len, |
| info, cts); |
| mac_ctl |= B43_TXH_MAC_SENDCTS; |
| len = sizeof(struct ieee80211_cts); |
| } else { |
| struct ieee80211_rts *rts; |
| |
| if (b43_is_old_txhdr_format(dev)) { |
| rts = (struct ieee80211_rts *) |
| (txhdr->old_format.rts_frame); |
| } else { |
| rts = (struct ieee80211_rts *) |
| (txhdr->new_format.rts_frame); |
| } |
| ieee80211_rts_get(dev->wl->hw, info->control.vif, |
| fragment_data, fragment_len, |
| info, rts); |
| mac_ctl |= B43_TXH_MAC_SENDRTS; |
| len = sizeof(struct ieee80211_rts); |
| } |
| len += FCS_LEN; |
| |
| /* Generate the PLCP headers for the RTS/CTS frame */ |
| if (b43_is_old_txhdr_format(dev)) |
| plcp = &txhdr->old_format.rts_plcp; |
| else |
| plcp = &txhdr->new_format.rts_plcp; |
| b43_generate_plcp_hdr((struct b43_plcp_hdr4 *)plcp, |
| len, rts_rate); |
| plcp = &txhdr->rts_plcp_fb; |
| b43_generate_plcp_hdr((struct b43_plcp_hdr4 *)plcp, |
| len, rts_rate_fb); |
| |
| if (b43_is_old_txhdr_format(dev)) { |
| hdr = (struct ieee80211_hdr *) |
| (&txhdr->old_format.rts_frame); |
| } else { |
| hdr = (struct ieee80211_hdr *) |
| (&txhdr->new_format.rts_frame); |
| } |
| txhdr->rts_dur_fb = hdr->duration_id; |
| |
| if (rts_rate_ofdm) { |
| extra_ft |= B43_TXH_EFT_RTS_OFDM; |
| txhdr->phy_rate_rts = |
| b43_plcp_get_ratecode_ofdm(rts_rate); |
| } else { |
| extra_ft |= B43_TXH_EFT_RTS_CCK; |
| txhdr->phy_rate_rts = |
| b43_plcp_get_ratecode_cck(rts_rate); |
| } |
| if (rts_rate_fb_ofdm) |
| extra_ft |= B43_TXH_EFT_RTSFB_OFDM; |
| else |
| extra_ft |= B43_TXH_EFT_RTSFB_CCK; |
| } |
| |
| /* Magic cookie */ |
| if (b43_is_old_txhdr_format(dev)) |
| txhdr->old_format.cookie = cpu_to_le16(cookie); |
| else |
| txhdr->new_format.cookie = cpu_to_le16(cookie); |
| |
| /* Apply the bitfields */ |
| txhdr->mac_ctl = cpu_to_le32(mac_ctl); |
| txhdr->phy_ctl = cpu_to_le16(phy_ctl); |
| txhdr->extra_ft = extra_ft; |
| |
| return 0; |
| } |
| |
| static s8 b43_rssi_postprocess(struct b43_wldev *dev, |
| u8 in_rssi, int ofdm, |
| int adjust_2053, int adjust_2050) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| s32 tmp; |
| |
| switch (phy->radio_ver) { |
| case 0x2050: |
| if (ofdm) { |
| tmp = in_rssi; |
| if (tmp > 127) |
| tmp -= 256; |
| tmp *= 73; |
| tmp /= 64; |
| if (adjust_2050) |
| tmp += 25; |
| else |
| tmp -= 3; |
| } else { |
| if (dev->dev->bus->sprom. |
| boardflags_lo & B43_BFL_RSSI) { |
| if (in_rssi > 63) |
| in_rssi = 63; |
| B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| tmp = gphy->nrssi_lt[in_rssi]; |
| tmp = 31 - tmp; |
| tmp *= -131; |
| tmp /= 128; |
| tmp -= 57; |
| } else { |
| tmp = in_rssi; |
| tmp = 31 - tmp; |
| tmp *= -149; |
| tmp /= 128; |
| tmp -= 68; |
| } |
| if (phy->type == B43_PHYTYPE_G && adjust_2050) |
| tmp += 25; |
| } |
| break; |
| case 0x2060: |
| if (in_rssi > 127) |
| tmp = in_rssi - 256; |
| else |
| tmp = in_rssi; |
| break; |
| default: |
| tmp = in_rssi; |
| tmp -= 11; |
| tmp *= 103; |
| tmp /= 64; |
| if (adjust_2053) |
| tmp -= 109; |
| else |
| tmp -= 83; |
| } |
| |
| return (s8) tmp; |
| } |
| |
| //TODO |
| #if 0 |
| static s8 b43_rssinoise_postprocess(struct b43_wldev *dev, u8 in_rssi) |
| { |
| struct b43_phy *phy = &dev->phy; |
| s8 ret; |
| |
| if (phy->type == B43_PHYTYPE_A) { |
| //TODO: Incomplete specs. |
| ret = 0; |
| } else |
| ret = b43_rssi_postprocess(dev, in_rssi, 0, 1, 1); |
| |
| return ret; |
| } |
| #endif |
| |
| void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) |
| { |
| struct ieee80211_rx_status status; |
| struct b43_plcp_hdr6 *plcp; |
| struct ieee80211_hdr *wlhdr; |
| const struct b43_rxhdr_fw4 *rxhdr = _rxhdr; |
| __le16 fctl; |
| u16 phystat0, phystat3, chanstat, mactime; |
| u32 macstat; |
| u16 chanid; |
| u16 phytype; |
| int padding; |
| |
| memset(&status, 0, sizeof(status)); |
| |
| /* Get metadata about the frame from the header. */ |
| phystat0 = le16_to_cpu(rxhdr->phy_status0); |
| phystat3 = le16_to_cpu(rxhdr->phy_status3); |
| macstat = le32_to_cpu(rxhdr->mac_status); |
| mactime = le16_to_cpu(rxhdr->mac_time); |
| chanstat = le16_to_cpu(rxhdr->channel); |
| phytype = chanstat & B43_RX_CHAN_PHYTYPE; |
| |
| if (unlikely(macstat & B43_RX_MAC_FCSERR)) { |
| dev->wl->ieee_stats.dot11FCSErrorCount++; |
| status.flag |= RX_FLAG_FAILED_FCS_CRC; |
| } |
| if (unlikely(phystat0 & (B43_RX_PHYST0_PLCPHCF | B43_RX_PHYST0_PLCPFV))) |
| status.flag |= RX_FLAG_FAILED_PLCP_CRC; |
| if (phystat0 & B43_RX_PHYST0_SHORTPRMBL) |
| status.flag |= RX_FLAG_SHORTPRE; |
| if (macstat & B43_RX_MAC_DECERR) { |
| /* Decryption with the given key failed. |
| * Drop the packet. We also won't be able to decrypt it with |
| * the key in software. */ |
| goto drop; |
| } |
| |
| /* Skip PLCP and padding */ |
| padding = (macstat & B43_RX_MAC_PADDING) ? 2 : 0; |
| if (unlikely(skb->len < (sizeof(struct b43_plcp_hdr6) + padding))) { |
| b43dbg(dev->wl, "RX: Packet size underrun (1)\n"); |
| goto drop; |
| } |
| plcp = (struct b43_plcp_hdr6 *)(skb->data + padding); |
| skb_pull(skb, sizeof(struct b43_plcp_hdr6) + padding); |
| /* The skb contains the Wireless Header + payload data now */ |
| if (unlikely(skb->len < (2 + 2 + 6 /*minimum hdr */ + FCS_LEN))) { |
| b43dbg(dev->wl, "RX: Packet size underrun (2)\n"); |
| goto drop; |
| } |
| wlhdr = (struct ieee80211_hdr *)(skb->data); |
| fctl = wlhdr->frame_control; |
| |
| if (macstat & B43_RX_MAC_DEC) { |
| unsigned int keyidx; |
| int wlhdr_len; |
| |
| keyidx = ((macstat & B43_RX_MAC_KEYIDX) |
| >> B43_RX_MAC_KEYIDX_SHIFT); |
| /* We must adjust the key index here. We want the "physical" |
| * key index, but the ucode passed it slightly different. |
| */ |
| keyidx = b43_kidx_to_raw(dev, keyidx); |
| B43_WARN_ON(keyidx >= dev->max_nr_keys); |
| |
| if (dev->key[keyidx].algorithm != B43_SEC_ALGO_NONE) { |
| wlhdr_len = ieee80211_hdrlen(fctl); |
| if (unlikely(skb->len < (wlhdr_len + 3))) { |
| b43dbg(dev->wl, |
| "RX: Packet size underrun (3)\n"); |
| goto drop; |
| } |
| status.flag |= RX_FLAG_DECRYPTED; |
| } |
| } |
| |
| /* Link quality statistics */ |
| status.noise = dev->stats.link_noise; |
| if ((chanstat & B43_RX_CHAN_PHYTYPE) == B43_PHYTYPE_N) { |
| // s8 rssi = max(rxhdr->power0, rxhdr->power1); |
| //TODO: Find out what the rssi value is (dBm or percentage?) |
| // and also find out what the maximum possible value is. |
| // Fill status.ssi and status.signal fields. |
| } else { |
| status.signal = b43_rssi_postprocess(dev, rxhdr->jssi, |
| (phystat0 & B43_RX_PHYST0_OFDM), |
| (phystat0 & B43_RX_PHYST0_GAINCTL), |
| (phystat3 & B43_RX_PHYST3_TRSTATE)); |
| status.qual = (rxhdr->jssi * 100) / B43_RX_MAX_SSI; |
| } |
| |
| if (phystat0 & B43_RX_PHYST0_OFDM) |
| status.rate_idx = b43_plcp_get_bitrate_idx_ofdm(plcp, |
| phytype == B43_PHYTYPE_A); |
| else |
| status.rate_idx = b43_plcp_get_bitrate_idx_cck(plcp); |
| if (unlikely(status.rate_idx == -1)) { |
| /* PLCP seems to be corrupted. |
| * Drop the frame, if we are not interested in corrupted frames. */ |
| if (!(dev->wl->filter_flags & FIF_PLCPFAIL)) |
| goto drop; |
| } |
| status.antenna = !!(phystat0 & B43_RX_PHYST0_ANT); |
| |
| /* |
| * All frames on monitor interfaces and beacons always need a full |
| * 64-bit timestamp. Monitor interfaces need it for diagnostic |
| * purposes and beacons for IBSS merging. |
| * This code assumes we get to process the packet within 16 bits |
| * of timestamp, i.e. about 65 milliseconds after the PHY received |
| * the first symbol. |
| */ |
| if (ieee80211_is_beacon(fctl) || dev->wl->radiotap_enabled) { |
| u16 low_mactime_now; |
| |
| b43_tsf_read(dev, &status.mactime); |
| low_mactime_now = status.mactime; |
| status.mactime = status.mactime & ~0xFFFFULL; |
| status.mactime += mactime; |
| if (low_mactime_now <= mactime) |
| status.mactime -= 0x10000; |
| status.flag |= RX_FLAG_TSFT; |
| } |
| |
| chanid = (chanstat & B43_RX_CHAN_ID) >> B43_RX_CHAN_ID_SHIFT; |
| switch (chanstat & B43_RX_CHAN_PHYTYPE) { |
| case B43_PHYTYPE_A: |
| status.band = IEEE80211_BAND_5GHZ; |
| B43_WARN_ON(1); |
| /* FIXME: We don't really know which value the "chanid" contains. |
| * So the following assignment might be wrong. */ |
| status.freq = b43_channel_to_freq_5ghz(chanid); |
| break; |
| case B43_PHYTYPE_G: |
| status.band = IEEE80211_BAND_2GHZ; |
| /* chanid is the radio channel cookie value as used |
| * to tune the radio. */ |
| status.freq = chanid + 2400; |
| break; |
| case B43_PHYTYPE_N: |
| /* chanid is the SHM channel cookie. Which is the plain |
| * channel number in b43. */ |
| if (chanstat & B43_RX_CHAN_5GHZ) { |
| status.band = IEEE80211_BAND_5GHZ; |
| status.freq = b43_freq_to_channel_5ghz(chanid); |
| } else { |
| status.band = IEEE80211_BAND_2GHZ; |
| status.freq = b43_freq_to_channel_2ghz(chanid); |
| } |
| break; |
| default: |
| B43_WARN_ON(1); |
| goto drop; |
| } |
| |
| memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); |
| ieee80211_rx_irqsafe(dev->wl->hw, skb); |
| |
| return; |
| drop: |
| b43dbg(dev->wl, "RX: Packet dropped\n"); |
| dev_kfree_skb_any(skb); |
| } |
| |
| void b43_handle_txstatus(struct b43_wldev *dev, |
| const struct b43_txstatus *status) |
| { |
| b43_debugfs_log_txstat(dev, status); |
| |
| if (status->intermediate) |
| return; |
| if (status->for_ampdu) |
| return; |
| if (!status->acked) |
| dev->wl->ieee_stats.dot11ACKFailureCount++; |
| if (status->rts_count) { |
| if (status->rts_count == 0xF) //FIXME |
| dev->wl->ieee_stats.dot11RTSFailureCount++; |
| else |
| dev->wl->ieee_stats.dot11RTSSuccessCount++; |
| } |
| |
| if (b43_using_pio_transfers(dev)) |
| b43_pio_handle_txstatus(dev, status); |
| else |
| b43_dma_handle_txstatus(dev, status); |
| |
| b43_phy_txpower_check(dev, 0); |
| } |
| |
| /* Fill out the mac80211 TXstatus report based on the b43-specific |
| * txstatus report data. This returns a boolean whether the frame was |
| * successfully transmitted. */ |
| bool b43_fill_txstatus_report(struct b43_wldev *dev, |
| struct ieee80211_tx_info *report, |
| const struct b43_txstatus *status) |
| { |
| bool frame_success = 1; |
| int retry_limit; |
| |
| /* preserve the confiured retry limit before clearing the status |
| * The xmit function has overwritten the rc's value with the actual |
| * retry limit done by the hardware */ |
| retry_limit = report->status.rates[0].count; |
| ieee80211_tx_info_clear_status(report); |
| |
| if (status->acked) { |
| /* The frame was ACKed. */ |
| report->flags |= IEEE80211_TX_STAT_ACK; |
| } else { |
| /* The frame was not ACKed... */ |
| if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) { |
| /* ...but we expected an ACK. */ |
| frame_success = 0; |
| } |
| } |
| if (status->frame_count == 0) { |
| /* The frame was not transmitted at all. */ |
| report->status.rates[0].count = 0; |
| } else if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { |
| /* |
| * If the short retries (RTS, not data frame) have exceeded |
| * the limit, the hw will not have tried the selected rate, |
| * but will have used the fallback rate instead. |
| * Don't let the rate control count attempts for the selected |
| * rate in this case, otherwise the statistics will be off. |
| */ |
| report->status.rates[0].count = 0; |
| report->status.rates[1].count = status->frame_count; |
| } else { |
| if (status->frame_count > retry_limit) { |
| report->status.rates[0].count = retry_limit; |
| report->status.rates[1].count = status->frame_count - |
| retry_limit; |
| |
| } else { |
| report->status.rates[0].count = status->frame_count; |
| report->status.rates[1].idx = -1; |
| } |
| } |
| |
| return frame_success; |
| } |
| |
| /* Stop any TX operation on the device (suspend the hardware queues) */ |
| void b43_tx_suspend(struct b43_wldev *dev) |
| { |
| if (b43_using_pio_transfers(dev)) |
| b43_pio_tx_suspend(dev); |
| else |
| b43_dma_tx_suspend(dev); |
| } |
| |
| /* Resume any TX operation on the device (resume the hardware queues) */ |
| void b43_tx_resume(struct b43_wldev *dev) |
| { |
| if (b43_using_pio_transfers(dev)) |
| b43_pio_tx_resume(dev); |
| else |
| b43_dma_tx_resume(dev); |
| } |