| /* |
| * Architecture specific parts of the Floppy driver |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1995 |
| */ |
| #ifndef __ASM_I386_FLOPPY_H |
| #define __ASM_I386_FLOPPY_H |
| |
| #include <linux/vmalloc.h> |
| |
| |
| /* |
| * The DMA channel used by the floppy controller cannot access data at |
| * addresses >= 16MB |
| * |
| * Went back to the 1MB limit, as some people had problems with the floppy |
| * driver otherwise. It doesn't matter much for performance anyway, as most |
| * floppy accesses go through the track buffer. |
| */ |
| #define _CROSS_64KB(a,s,vdma) \ |
| (!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) |
| |
| #define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1) |
| |
| |
| #define SW fd_routine[use_virtual_dma&1] |
| #define CSW fd_routine[can_use_virtual_dma & 1] |
| |
| |
| #define fd_inb(port) inb_p(port) |
| #define fd_outb(value,port) outb_p(value,port) |
| |
| #define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy") |
| #define fd_free_dma() CSW._free_dma(FLOPPY_DMA) |
| #define fd_enable_irq() enable_irq(FLOPPY_IRQ) |
| #define fd_disable_irq() disable_irq(FLOPPY_IRQ) |
| #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL) |
| #define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA) |
| #define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size) |
| #define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io) |
| |
| #define FLOPPY_CAN_FALLBACK_ON_NODMA |
| |
| static int virtual_dma_count; |
| static int virtual_dma_residue; |
| static char *virtual_dma_addr; |
| static int virtual_dma_mode; |
| static int doing_pdma; |
| |
| static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs) |
| { |
| register unsigned char st; |
| |
| #undef TRACE_FLPY_INT |
| #define NO_FLOPPY_ASSEMBLER |
| |
| #ifdef TRACE_FLPY_INT |
| static int calls=0; |
| static int bytes=0; |
| static int dma_wait=0; |
| #endif |
| if (!doing_pdma) |
| return floppy_interrupt(irq, dev_id, regs); |
| |
| #ifdef TRACE_FLPY_INT |
| if(!calls) |
| bytes = virtual_dma_count; |
| #endif |
| |
| #ifndef NO_FLOPPY_ASSEMBLER |
| __asm__ ( |
| "testl %1,%1" |
| "je 3f" |
| "1: inb %w4,%b0" |
| "andb $160,%b0" |
| "cmpb $160,%b0" |
| "jne 2f" |
| "incw %w4" |
| "testl %3,%3" |
| "jne 4f" |
| "inb %w4,%b0" |
| "movb %0,(%2)" |
| "jmp 5f" |
| "4: movb (%2),%0" |
| "outb %b0,%w4" |
| "5: decw %w4" |
| "outb %0,$0x80" |
| "decl %1" |
| "incl %2" |
| "testl %1,%1" |
| "jne 1b" |
| "3: inb %w4,%b0" |
| "2: " |
| : "=a" ((char) st), |
| "=c" ((long) virtual_dma_count), |
| "=S" ((long) virtual_dma_addr) |
| : "b" ((long) virtual_dma_mode), |
| "d" ((short) virtual_dma_port+4), |
| "1" ((long) virtual_dma_count), |
| "2" ((long) virtual_dma_addr)); |
| #else |
| { |
| register int lcount; |
| register char *lptr; |
| |
| st = 1; |
| for(lcount=virtual_dma_count, lptr=virtual_dma_addr; |
| lcount; lcount--, lptr++) { |
| st=inb(virtual_dma_port+4) & 0xa0 ; |
| if(st != 0xa0) |
| break; |
| if(virtual_dma_mode) |
| outb_p(*lptr, virtual_dma_port+5); |
| else |
| *lptr = inb_p(virtual_dma_port+5); |
| } |
| virtual_dma_count = lcount; |
| virtual_dma_addr = lptr; |
| st = inb(virtual_dma_port+4); |
| } |
| #endif |
| |
| #ifdef TRACE_FLPY_INT |
| calls++; |
| #endif |
| if(st == 0x20) |
| return IRQ_HANDLED; |
| if(!(st & 0x20)) { |
| virtual_dma_residue += virtual_dma_count; |
| virtual_dma_count=0; |
| #ifdef TRACE_FLPY_INT |
| printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", |
| virtual_dma_count, virtual_dma_residue, calls, bytes, |
| dma_wait); |
| calls = 0; |
| dma_wait=0; |
| #endif |
| doing_pdma = 0; |
| floppy_interrupt(irq, dev_id, regs); |
| return IRQ_HANDLED; |
| } |
| #ifdef TRACE_FLPY_INT |
| if(!virtual_dma_count) |
| dma_wait++; |
| #endif |
| return IRQ_HANDLED; |
| } |
| |
| static void fd_disable_dma(void) |
| { |
| if(! (can_use_virtual_dma & 1)) |
| disable_dma(FLOPPY_DMA); |
| doing_pdma = 0; |
| virtual_dma_residue += virtual_dma_count; |
| virtual_dma_count=0; |
| } |
| |
| static int vdma_request_dma(unsigned int dmanr, const char * device_id) |
| { |
| return 0; |
| } |
| |
| static void vdma_nop(unsigned int dummy) |
| { |
| } |
| |
| |
| static int vdma_get_dma_residue(unsigned int dummy) |
| { |
| return virtual_dma_count + virtual_dma_residue; |
| } |
| |
| |
| static int fd_request_irq(void) |
| { |
| if(can_use_virtual_dma) |
| return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT, |
| "floppy", NULL); |
| else |
| return request_irq(FLOPPY_IRQ, floppy_interrupt, |
| SA_INTERRUPT|SA_SAMPLE_RANDOM, |
| "floppy", NULL); |
| |
| } |
| |
| static unsigned long dma_mem_alloc(unsigned long size) |
| { |
| return __get_dma_pages(GFP_KERNEL,get_order(size)); |
| } |
| |
| |
| static unsigned long vdma_mem_alloc(unsigned long size) |
| { |
| return (unsigned long) vmalloc(size); |
| |
| } |
| |
| #define nodma_mem_alloc(size) vdma_mem_alloc(size) |
| |
| static void _fd_dma_mem_free(unsigned long addr, unsigned long size) |
| { |
| if((unsigned int) addr >= (unsigned int) high_memory) |
| vfree((void *)addr); |
| else |
| free_pages(addr, get_order(size)); |
| } |
| |
| #define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size) |
| |
| static void _fd_chose_dma_mode(char *addr, unsigned long size) |
| { |
| if(can_use_virtual_dma == 2) { |
| if((unsigned int) addr >= (unsigned int) high_memory || |
| isa_virt_to_bus(addr) >= 0x1000000 || |
| _CROSS_64KB(addr, size, 0)) |
| use_virtual_dma = 1; |
| else |
| use_virtual_dma = 0; |
| } else { |
| use_virtual_dma = can_use_virtual_dma & 1; |
| } |
| } |
| |
| #define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size) |
| |
| |
| static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) |
| { |
| doing_pdma = 1; |
| virtual_dma_port = io; |
| virtual_dma_mode = (mode == DMA_MODE_WRITE); |
| virtual_dma_addr = addr; |
| virtual_dma_count = size; |
| virtual_dma_residue = 0; |
| return 0; |
| } |
| |
| static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) |
| { |
| #ifdef FLOPPY_SANITY_CHECK |
| if (CROSS_64KB(addr, size)) { |
| printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size); |
| return -1; |
| } |
| #endif |
| /* actual, physical DMA */ |
| doing_pdma = 0; |
| clear_dma_ff(FLOPPY_DMA); |
| set_dma_mode(FLOPPY_DMA,mode); |
| set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr)); |
| set_dma_count(FLOPPY_DMA,size); |
| enable_dma(FLOPPY_DMA); |
| return 0; |
| } |
| |
| struct fd_routine_l { |
| int (*_request_dma)(unsigned int dmanr, const char * device_id); |
| void (*_free_dma)(unsigned int dmanr); |
| int (*_get_dma_residue)(unsigned int dummy); |
| unsigned long (*_dma_mem_alloc) (unsigned long size); |
| int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); |
| } fd_routine[] = { |
| { |
| request_dma, |
| free_dma, |
| get_dma_residue, |
| dma_mem_alloc, |
| hard_dma_setup |
| }, |
| { |
| vdma_request_dma, |
| vdma_nop, |
| vdma_get_dma_residue, |
| vdma_mem_alloc, |
| vdma_dma_setup |
| } |
| }; |
| |
| |
| static int FDC1 = 0x3f0; |
| static int FDC2 = -1; |
| |
| /* |
| * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock |
| * is needed to prevent corrupted CMOS RAM in case "insmod floppy" |
| * coincides with another rtc CMOS user. Paul G. |
| */ |
| #define FLOPPY0_TYPE ({ \ |
| unsigned long flags; \ |
| unsigned char val; \ |
| spin_lock_irqsave(&rtc_lock, flags); \ |
| val = (CMOS_READ(0x10) >> 4) & 15; \ |
| spin_unlock_irqrestore(&rtc_lock, flags); \ |
| val; \ |
| }) |
| |
| #define FLOPPY1_TYPE ({ \ |
| unsigned long flags; \ |
| unsigned char val; \ |
| spin_lock_irqsave(&rtc_lock, flags); \ |
| val = CMOS_READ(0x10) & 15; \ |
| spin_unlock_irqrestore(&rtc_lock, flags); \ |
| val; \ |
| }) |
| |
| #define N_FDC 2 |
| #define N_DRIVE 8 |
| |
| #define FLOPPY_MOTOR_MASK 0xf0 |
| |
| #define AUTO_DMA |
| |
| #define EXTRA_FLOPPY_PARAMS |
| |
| #endif /* __ASM_I386_FLOPPY_H */ |