arch/arm64/boot/dts/qcom/apq8053-lat-concam-proto.dts

/*
 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include "apq8053-lat-concam.dtsi"
#include "apq8053-camera-sensor-mtp.dtsi"
#include "apq8053-lat-concam-regulator.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. APQ8053 LAT Concam Dev board";
	compatible = "qcom,apq8053-mtp", "qcom,apq8053", "qcom,mtp";
	qcom,board-id= <0x56 0x31>;
};



&pm8953_mpps {
	#address-cells = <1>;
	#size-cells = <1>;
	mpp@a100 {
		reg = <0xa100 0x100>;
		qcom,pin-num = <2>;
		qcom,mode = <4>; // A-input
		qcom,invert = <1>; /* Enable MPP */
		qcom,ain-route = <1>; // QPNP_PIN_AIN_AMUX_CH6 = 1 for MPP2
		qcom,master-en = <1>; //Enable MPP
		qcom,src-sel = <0>; /* Function constant */
		status = "okay";
	};

	mpp@a200 {
		/* MPP3 - PA_THERM config */
		reg = <0xa200 0x100>;
		com,pin-num = <3>;
		qcom,mode = <4>; /* AIN input */
		qcom,invert = <1>; /* Enable MPP */
		qcom,ain-route = <2>; /* AMUX 7 */
		qcom,master-en = <1>;
		qcom,src-sel = <0>; /* Function constant */
		status = "okay";
	};

	mpp@a300 {
		/* MPP4 - CASE_THERM config */
		reg = <0xa300 0x100>;
		com,pin-num = <4>;
		qcom,mode = <4>; /* AIN input */
		qcom,invert = <1>; /* Enable MPP */
		qcom,ain-route = <3>; /* AMUX 8 */
		qcom,master-en = <1>;
		qcom,src-sel = <0>; /* Function constant */
		status = "okay";
	};
};

&tlmm {
	button_active: button_active {
		mux {
			pins = "gpio57";
			function = "gpio";
		};

		config {
			pins = "gpio57";
			drive-strength = <8>;
			bias-pull-up;
		};
	};

	icr_int {
		qcom,pins = <&tlmm 53>;
		qcom,num-grp-pins = <1>;
		qcom,pin-func = <0>;
		label = "icr-int";
		icr_int_default: icr_int_default {
			drive-strength = <2>;	/* 2 MA */
			bias-pull-up;		/* PULL UP*/
		};
	};

	gcc_gp1_clk_pin {
		qcom,pins = <&tlmm 33>;
		qcom,num-grp-pins = <1>;
		qcom,pin-func = <2>;
		label = "gp1-clk-pin";
		gcc_gp1_clk_pin: gcc_gp1_clk_pin {
			drive-strength = <2>;	/* 2 MA */
			bias-disable;
		};
	};

	bt_host_wake_default: bt_host_wake_default {
		mux {
			pins = "gpio52";
			function = "gpio";
		};
		config {
			pins = "gpio52";
			bias-disable; /* No PULL */
			drive-strength = <2>;
		};
	};
};

&soc {
	usb_detect: usb_detect {
		compatible = "linux,extcon-usb-gpio";
		vbus-gpio = <&tlmm 57 GPIO_ACTIVE_HIGH>;
		qcom,enable-button-mode;

		pinctrl-names = "button_active";
		pinctrl-0 = <&button_active>;
	};

	hbtp {
		status = "disabled";
	};
};

&usb3 {
	extcon = <&usb_detect>;
};

&firmware {
	android {
		vbmeta {
			compatible = "android,vbmeta";
			parts = "vbmeta,boot,system,vendor,bluetooth,modem,oem";
		};
		fstab {
			/delete-node/ system;
			vendor {
				fsmgr_flags = "wait,slotselect,avb";
			};
		};
	};
};

&modem_mem {
	reg = <0x0 0x86c00000 0x0 0x1e00000>;
};

&wcnss_fw_mem {
	reg = <0x0 0x89b00000 0x0 0x700000>;
};

&gpio_key_suspend {
	config {
		/delete-property/ bias-pull-up;
		bias-pull-down;
	};
};