arch/arm64/boot/dts/qcom/msm8909-pm8916-mtp.dtsi

/* Copyright (c) 2014-2018, 2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>

&soc {
	i2c@78b9000 {
		synaptics@20 {
			avdd-supply = <&pm8916_l17>;
			vdd-supply = <&pm8916_l6>;
		};
	};

	i2c@78b6000 {
		nq@28 {
			qcom,nq-clkreq = <&pm8916_gpios 2 0>;
		};
	};

};

&audio_codec_mtp {
	qcom,model = "msm8909-pm8916-snd-card";
	asoc-codec = <&stub_codec>, <&msm_dig_codec>, <&pmic_anlg_codec>;
	asoc-codec-names = "msm-stub-codec.1", "msm-dig-codec", "analog-codec";
};


&pm8916_1 {
	pmic_anlg_codec: analog-codec@f100 {
		status = "okay";
		compatible = "qcom,pmic-analog-codec";
		reg = <0xf000 0x200>;
		#address-cells = <2>;
		#size-cells = <0>;
		interrupt-parent = <&spmi_bus>;
		interrupts =
			<0x1 0xf0 0x0 IRQ_TYPE_NONE>,
			<0x1 0xf0 0x1 IRQ_TYPE_NONE>,
			<0x1 0xf0 0x2 IRQ_TYPE_NONE>,
			<0x1 0xf0 0x3 IRQ_TYPE_NONE>,
			<0x1 0xf0 0x4 IRQ_TYPE_NONE>,
			<0x1 0xf0 0x5 IRQ_TYPE_NONE>,
			<0x1 0xf0 0x6 IRQ_TYPE_NONE>,
			<0x1 0xf0 0x7 IRQ_TYPE_NONE>,
			<0x1 0xf1 0x0 IRQ_TYPE_NONE>,
			<0x1 0xf1 0x1 IRQ_TYPE_NONE>,
			<0x1 0xf1 0x2 IRQ_TYPE_NONE>,
			<0x1 0xf1 0x3 IRQ_TYPE_NONE>,
			<0x1 0xf1 0x4 IRQ_TYPE_NONE>,
			<0x1 0xf1 0x5 IRQ_TYPE_NONE>;
		interrupt-names =
			"spk_cnp_int",
			"spk_clip_int",
			"spk_ocp_int",
			"ins_rem_det1",
			"but_rel_det",
			"but_press_det",
			"ins_rem_det",
			"mbhc_int",
			"ear_ocp_int",
			"hphr_ocp_int",
			"hphl_ocp_det",
			"ear_cnp_int",
			"hphr_cnp_int",
			"hphl_cnp_int";

		cdc-vdda-cp-supply = <&pm8916_s4>;
		qcom,cdc-vdda-cp-voltage = <1800000 2200000>;
		qcom,cdc-vdda-cp-current = <770000>;

		cdc-vdda-h-supply = <&pm8916_l5>;
		qcom,cdc-vdda-h-voltage = <1800000 1800000>;
		qcom,cdc-vdda-h-current = <20000>;

		cdc-vdd-px-supply = <&pm8916_s4>;
		qcom,cdc-vdd-px-voltage = <1800000 2200000>;
		qcom,cdc-vdd-px-current = <770000>;

		cdc-vdd-pa-supply = <&pm8916_l5>;
		qcom,cdc-vdd-pa-voltage = <1800000 1800000>;
		qcom,cdc-vdd-pa-current = <5000>;

		cdc-vdd-mic-bias-supply = <&pm8916_l13>;
		qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>;
		qcom,cdc-vdd-mic-bias-current = <25000>;

		qcom,cdc-mclk-clk-rate = <9600000>;

		qcom,cdc-static-supplies =
					"cdc-vdda-h",
					"cdc-vdd-px",
					"cdc-vdd-pa",
					"cdc-vdda-cp";

		qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias";

		msm_dig_codec: msm-dig-codec@f000 {
			compatible = "qcom,msm-digital-codec";
			reg = <0x771c000 0x100>;
		};
	};
};

&sdhc_1 {
	vdd-supply = <&pm8916_l8>;
	vdd-io-supply = <&pm8916_l5>;
};

&sdhc_2 {
	vdd-supply = <&pm8916_l11>;
	vdd-io-supply = <&pm8916_l12>;
};

&i2c_3 {
	qcom,actuator@0 {
		cam_vaf-supply = <&pm8916_l8>;
	};


	qcom,eeprom@6c{
		cam_vdig-supply = <&pm8916_l2>;
		cam_vana-supply = <&pm8916_l10>;
		cam_vio-supply = <&pm8916_l6>;
		cam_vaf-supply = <&pm8916_l8>;
	};

	qcom,camera@0 {
		cam_vdig-supply = <&pm8916_l2>;
		cam_vana-supply = <&pm8916_l10>;
		cam_vio-supply = <&pm8916_l6>;
		cam_vaf-supply = <&pm8916_l8>;
	};

	qcom,camera@1 {
		cam_vana-supply = <&pm8916_l10>;
		cam_vio-supply = <&pm8916_l6>;
	};
};

&dsi_hx8394d_720_vid {
	qcom,cont-splash-enabled;
	qcom,mdss-dsi-pwm-gpio = <&pm8916_mpps 4 0>;
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
};

&spmi_bus {
	pm8916@0 {
		qcom,leds@a300 {
			status = "okay";
			qcom,led_mpp_4 {
				label = "mpp";
				linux,name = "button-backlight";
				linux,default-trigger = "none";
				qcom,default-state = "off";
				qcom,max-current = <40>;
				qcom,current-setting = <5>;
				qcom,id = <6>;
				qcom,mode = "manual";
				qcom,source-sel = <1>;
				qcom,mode-ctrl = <0x60>;
			};
		};
	};

	pm8916@1 {
		qcom,vibrator@c000 {
			status = "okay";
			qcom,vib-timeout-ms = <15000>;
			qcom,vib-vtg-level-mV = <3100>;
		};
	};
};

&pm8916_mpps {
	/* VDD_PX_BIAS_MPP_1 */
	vdd_px_bias_mpp {
		vdd_px_bias_mpp_default: vdd_px_bias_mpp_default {
			pins = "mpp1";
			function = "digital";
			status = "disabled";
		};
	};

	/* PMIC_MPP_2 */
	pmic_mpp {
		pmic_mpp_default: pmic_mpp_default {
			pins = "mpp2";
			function = "digital";
			status = "disabled";
		};
	};

	/* VREF_DAC_MPP_3 */
	vref_dac_mpp {
		vref_dac_mpp_default: vref_dac_mpp_default {
			pins = "mpp3";
			function = "digital";
			status = "disabled";
		};
	};

	/* WLED_PWM_MPP_4 */
	wled_pwm_mpp {
		wled_pwm_mpp_default: wled_pwm_mpp_default {
			pins = "mpp3";
			function = "digital";
			output-enable;
			power-source = <PM8916_MPP_VPH>;
			status = "okay";
		};
	};
};

/* pm8916 gpio pinctrl configuration */
&pm8916_gpios {
	/* Battery UICC Alarm */
	uim_batt_alarm { /* GPIO 1 */
		uim_batt_alarm_default: uim_batt_alarm_default {
			pins = "gpio1";
			status = "disabled";
		};
	};

	/* GPIO 2 (NFC_CLK_REQ) */
	nfc_clk {
		nfc_clk_default: nfc_clk_default {
			pins = "gpio2";
			function = "normal";
			input-enable;
			status = "disabled";
		};
	};

	/*  WCN_LDO_EN_GPIO_3 */
	wcn_ldo_en {
		wcn_ldo_en_default: wcn_ldo_en_default {
			pins = "gpio3";
			function = "normal";
			output-low;
			qcom,drive-strength = <1>;
			status = "disabled";
		};
	};

	/* External regulator control for APC */
	wcd_eldo_en { /* GPIO 4 */
		wcd_eldo_en_default: wcd_eldo_en_default {
			pins = "gpio4";
			status = "disabled";
		};
	};
};

&vendor_fstab {
	status = "disabled";
};

&system_fstab {
	status = "disabled";
};