blob: a0edcf6511231ec06261493ba34766e190fac7e1 [file] [log] [blame]
/*
* Copyright (c) 2015-2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&cci {
#address-cells = <1>;
#size-cells = <0>;
actuator0: qcom,actuator@0 {
cell-index = <0>;
reg = <0x0>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
cam_vaf-supply = <&pm8937_l17>;
qcom,cam-vreg-name = "cam_vaf";
qcom,cam-vreg-min-voltage = <2850000>;
qcom,cam-vreg-max-voltage = <2850000>;
qcom,cam-vreg-op-mode = <80000>;
};
actuator1: qcom,actuator@1 {
cell-index = <1>;
reg = <0x1>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
cam_vaf-supply = <&pm8937_l17>;
qcom,cam-vreg-name = "cam_vaf";
qcom,cam-vreg-min-voltage = <2850000>;
qcom,cam-vreg-max-voltage = <2850000>;
qcom,cam-vreg-op-mode = <80000>;
};
eeprom0: qcom,eeprom@0 {
cell-index = <0>;
compatible = "qcom,eeprom";
qcom,cci-master = <0>;
reg = <0x0>;
cam_vdig-supply = <&pm8937_l23>;
cam_vana-supply = <&pm8937_l22>;
cam_vio-supply = <&pm8937_l6>;
cam_vaf-supply = <&pm8937_l17>;
qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio",
"cam_vaf";
qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_default
&cam_sensor_rear_default>;
pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
gpios = <&tlmm 26 0>,
<&tlmm 36 0>,
<&tlmm 35 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0",
"CAM_STANDBY0";
status = "ok";
clocks = <&clock_gcc clk_mclk0_clk_src>,
<&clock_gcc clk_gcc_camss_mclk0_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <19200000 0>;
};
eeprom1: qcom,eeprom@1 {
cell-index = <1>;
reg = <0x1>;
qcom,eeprom-name = "sunny_8865";
compatible = "qcom,eeprom";
qcom,slave-addr = <0x6c>;
qcom,cci-master = <0>;
qcom,num-blocks = <8>;
qcom,page0 = <1 0x0100 2 0x01 1 1>;
qcom,poll0 = <0 0x0 2 0x0 1 0>;
qcom,mem0 = <0 0x0 2 0x0 1 0>;
qcom,page1 = <1 0x5002 2 0x00 1 0>;
qcom,poll1 = <0 0x0 2 0x0 1 0>;
qcom,mem1 = <0 0x0 2 0x0 1 0>;
qcom,page2 = <1 0x3d84 2 0xc0 1 0>;
qcom,poll2 = <0 0x0 2 0x0 1 0>;
qcom,mem2 = <0 0x0 2 0x0 1 0>;
qcom,page3 = <1 0x3d88 2 0x70 1 0>;
qcom,poll3 = <0 0x0 2 0x0 1 0>;
qcom,mem3 = <0 0x0 2 0x0 1 0>;
qcom,page4 = <1 0x3d89 2 0x10 1 0>;
qcom,poll4 = <0 0x0 2 0x0 1 0>;
qcom,mem4 = <0 0x0 2 0x0 1 0>;
qcom,page5 = <1 0x3d8a 2 0x70 1 0>;
qcom,poll5 = <0 0x0 2 0x0 1 0>;
qcom,mem5 = <0 0x0 2 0x0 1 0>;
qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;
qcom,poll6 = <0 0x0 2 0x0 1 0>;
qcom,mem6 = <0 0x0 2 0x0 1 0>;
qcom,page7 = <1 0x3d81 2 0x01 1 10>;
qcom,poll7 = <0 0x0 2 0x0 1 1>;
qcom,mem7 = <1536 0x7010 2 0 1 0>;
cam_vdig-supply = <&pm8937_l23>;
cam_vana-supply = <&pm8937_l22>;
cam_vio-supply = <&pm8937_l6>;
cam_vaf-supply = <&pm8937_l17>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
qcom,gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_default
&cam_sensor_front1_default>;
pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;
gpios = <&tlmm 28 0>,
<&tlmm 40 0>,
<&tlmm 39 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_STANDBY2";
qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",
"sensor_vreg",
"sensor_gpio", "sensor_gpio" , "sensor_clk";
qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",
"sensor_gpio_reset", "sensor_gpio_standby",
"sensor_cam_mclk";
qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;
qcom,cam-power-seq-delay = <1 1 1 30 30 5>;
status = "ok";
clocks = <&clock_gcc clk_mclk2_clk_src>,
<&clock_gcc clk_gcc_camss_mclk2_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <19200000 0>;
};
qcom,camera@0 {
cell-index = <0>;
compatible = "qcom,camera";
reg = <0x0>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <270>;
qcom,led-flash-src = <&led_flash0>;
qcom,eeprom-src = <&eeprom0>;
qcom,actuator-src = <&actuator0>;
cam_vana-supply = <&pm8937_l22>;
cam_vio-supply = <&pm8937_l6>;
cam_vaf-supply = <&pm8937_l17>;
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
qcom,cam-vreg-op-mode = <0 80000 100000>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_default
&cam_sensor_rear_default
&cam_sensor_rear_vdig>;
pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep
&cam_sensor_rear_vdig_sleep>;
gpios = <&tlmm 26 0>,
<&tlmm 36 0>,
<&tlmm 35 0>,
<&tlmm 62 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-vdig = <3>;
qcom,gpio-req-tbl-num = <0 1 2 3>;
qcom,gpio-req-tbl-flags = <1 0 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0",
"CAM_STANDBY0",
"CAM_VDIG";
qcom,sensor-position = <0>;
qcom,sensor-mode = <0>;
qcom,cci-master = <0>;
status = "ok";
clocks = <&clock_gcc clk_mclk0_clk_src>,
<&clock_gcc clk_gcc_camss_mclk0_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};
qcom,camera@1 {
cell-index = <1>;
compatible = "qcom,camera";
reg = <0x1>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <90>;
cam_vdig-supply = <&pm8937_l23>;
cam_vana-supply = <&pm8937_l22>;
cam_vio-supply = <&pm8937_l6>;
cam_vaf-supply = <&pm8937_l17>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_default
&cam_sensor_front_default>;
pinctrl-1 = <&cam_sensor_mclk1_sleep
&cam_sensor_front_sleep>;
gpios = <&tlmm 27 0>,
<&tlmm 38 0>,
<&tlmm 50 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1",
"CAM_STANDBY1";
qcom,sensor-position = <0x100>;
qcom,sensor-mode = <1>;
qcom,cci-master = <1>;
clocks = <&clock_gcc clk_mclk1_clk_src>,
<&clock_gcc clk_gcc_camss_mclk1_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};
qcom,camera@2 {
cell-index = <2>;
compatible = "qcom,camera";
reg = <0x02>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <90>;
qcom,eeprom-src = <&eeprom1>;
qcom,actuator-src = <&actuator1>;
cam_vdig-supply = <&pm8937_l23>;
cam_vana-supply = <&pm8937_l22>;
cam_vio-supply = <&pm8937_l6>;
cam_vaf-supply = <&pm8937_l17>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
qcom,gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_default
&cam_sensor_front1_default>;
pinctrl-1 = <&cam_sensor_mclk2_sleep
&cam_sensor_front1_sleep>;
gpios = <&tlmm 28 0>,
<&tlmm 40 0>,
<&tlmm 39 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_STANDBY2";
qcom,sensor-position = <1>;
qcom,sensor-mode = <0>;
qcom,cci-master = <0>;
status = "ok";
clocks = <&clock_gcc clk_mclk2_clk_src>,
<&clock_gcc clk_gcc_camss_mclk2_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};
};