| * Marvell Armada 370 / Armada XP Ethernet Controller (NETA) |
| |
| Required properties: |
| - compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta". |
| - reg: address and length of the register set for the device. |
| - interrupts: interrupt for the device |
| - phy: See ethernet.txt file in the same directory. |
| - phy-mode: See ethernet.txt file in the same directory |
| - clocks: List of clocks for this device. At least one clock is |
| mandatory for the core clock. If several clocks are given, then the |
| clock-names property must be used to identify them. |
| |
| Optional properties: |
| - tx-csum-limit: maximum mtu supported by port that allow TX checksum. |
| Value is presented in bytes. If not used, by default 1600B is set for |
| "marvell,armada-370-neta" and 9800B for others. |
| - clock-names: List of names corresponding to clocks property; shall be |
| "core" for core clock and "bus" for the optional bus clock. |
| |
| |
| Example: |
| |
| ethernet@d0070000 { |
| compatible = "marvell,armada-370-neta"; |
| reg = <0xd0070000 0x2500>; |
| interrupts = <8>; |
| clocks = <&gate_clk 4>; |
| tx-csum-limit = <9800> |
| status = "okay"; |
| phy = <&phy0>; |
| phy-mode = "rgmii-id"; |
| }; |