| /* Copyright (c) 2016-2017, 2019 The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/spmi/spmi.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| &spmi_bus { |
| pmi8998_lsid0: qcom,pmi8998@2 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x2 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| pmi8998_revid: qcom,revid@100 { |
| compatible = "qcom,qpnp-revid"; |
| reg = <0x100 0x100>; |
| qcom,fab-id-valid; |
| }; |
| |
| pmi8998_misc: qcom,misc@900 { |
| compatible = "qcom,qpnp-misc"; |
| reg = <0x900 0x100>; |
| }; |
| |
| qcom,power-on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| }; |
| |
| pmi8998_tz: qcom,temp-alarm@2400 { |
| compatible = "qcom,spmi-temp-alarm"; |
| reg = <0x2400 0x100>; |
| interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_RISING>; |
| io-channels = <&pmi8998_rradc 7>; |
| io-channel-names = "thermal"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| pmi8998_gpios: pinctrl@c000 { |
| compatible = "qcom,spmi-gpio"; |
| reg = <0xc000 0xe00>; |
| interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>, |
| <0x2 0xc1 0 IRQ_TYPE_NONE>, |
| <0x2 0xc2 0 IRQ_TYPE_NONE>, |
| <0x2 0xc4 0 IRQ_TYPE_NONE>, |
| <0x2 0xc5 0 IRQ_TYPE_NONE>, |
| <0x2 0xc7 0 IRQ_TYPE_NONE>, |
| <0x2 0xc8 0 IRQ_TYPE_NONE>, |
| <0x2 0xc9 0 IRQ_TYPE_NONE>, |
| <0x2 0xca 0 IRQ_TYPE_NONE>, |
| <0x2 0xcb 0 IRQ_TYPE_NONE>, |
| <0x2 0xcd 0 IRQ_TYPE_NONE>; |
| interrupt-names = "pmi8998_gpio1", "pmi8998_gpio2", |
| "pmi8998_gpio3", "pmi8998_gpio5", |
| "pmi8998_gpio6", "pmi8998_gpio8", |
| "pmi8998_gpio9", "pmi8998_gpio10", |
| "pmi8998_gpio11", "pmi8998_gpio12", |
| "pmi8998_gpio14"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| qcom,gpios-disallowed = <4 7 13>; |
| }; |
| |
| pmi8998_qnovo: qcom,qpnp-qnovo@1500 { |
| compatible = "qcom,qpnp-qnovo"; |
| reg = <0x1500 0x100>; |
| interrupts = <0x2 0x15 0x0 IRQ_TYPE_NONE>; |
| interrupt-names = "ptrain-done"; |
| qcom,pmic-revid = <&pmi8998_revid>; |
| }; |
| |
| pmi8998_charger: qcom,qpnp-smb2 { |
| compatible = "qcom,qpnp-smb2"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #cooling-cells = <2>; |
| |
| qcom,pmic-revid = <&pmi8998_revid>; |
| |
| io-channels = <&pmi8998_rradc 8>, |
| <&pmi8998_rradc 10>, |
| <&pmi8998_rradc 3>, |
| <&pmi8998_rradc 4>; |
| io-channel-names = "charger_temp", |
| "charger_temp_max", |
| "usbin_i", |
| "usbin_v"; |
| |
| qcom,boost-threshold-ua = <100000>; |
| qcom,wipower-max-uw = <5000000>; |
| dpdm-supply = <&qusb_phy0>; |
| |
| qcom,thermal-mitigation |
| = <3000000 1500000 1000000 500000>; |
| qcom,auto-recharge-soc; |
| qcom,suspend-input-on-debug-batt; |
| |
| qcom,chgr@1000 { |
| reg = <0x1000 0x100>; |
| interrupts = |
| <0x2 0x10 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x10 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x10 0x2 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x10 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x10 0x4 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "chg-error", |
| "chg-state-change", |
| "step-chg-state-change", |
| "step-chg-soc-update-fail", |
| "step-chg-soc-update-request"; |
| }; |
| |
| qcom,otg@1100 { |
| reg = <0x1100 0x100>; |
| interrupts = <0x2 0x11 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x11 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x11 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x11 0x3 IRQ_TYPE_EDGE_BOTH>; |
| |
| interrupt-names = "otg-fail", |
| "otg-overcurrent", |
| "otg-oc-dis-sw-sts", |
| "testmode-change-detect"; |
| }; |
| |
| qcom,bat-if@1200 { |
| reg = <0x1200 0x100>; |
| interrupts = |
| <0x2 0x12 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x12 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x12 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x12 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x12 0x5 IRQ_TYPE_EDGE_BOTH>; |
| |
| interrupt-names = "bat-temp", |
| "bat-ocp", |
| "bat-ov", |
| "bat-low", |
| "bat-therm-or-id-missing", |
| "bat-terminal-missing"; |
| }; |
| |
| qcom,usb-chgpth@1300 { |
| reg = <0x1300 0x100>; |
| interrupts = |
| <0x2 0x13 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x13 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x13 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x13 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x13 0x5 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x13 0x7 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "usbin-collapse", |
| "usbin-lt-3p6v", |
| "usbin-uv", |
| "usbin-ov", |
| "usbin-plugin", |
| "usbin-src-change", |
| "usbin-icl-change", |
| "type-c-change"; |
| }; |
| |
| qcom,dc-chgpth@1400 { |
| reg = <0x1400 0x100>; |
| interrupts = |
| <0x2 0x14 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x14 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x14 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x14 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x14 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x14 0x5 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x14 0x6 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "dcin-collapse", |
| "dcin-lt-3p6v", |
| "dcin-uv", |
| "dcin-ov", |
| "dcin-plugin", |
| "div2-en-dg", |
| "dcin-icl-change"; |
| }; |
| |
| qcom,chgr-misc@1600 { |
| reg = <0x1600 0x100>; |
| interrupts = |
| <0x2 0x16 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x16 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x16 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x16 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x16 0x5 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x16 0x6 IRQ_TYPE_EDGE_FALLING>, |
| <0x2 0x16 0x7 IRQ_TYPE_EDGE_BOTH>; |
| |
| interrupt-names = "wdog-snarl", |
| "wdog-bark", |
| "aicl-fail", |
| "aicl-done", |
| "high-duty-cycle", |
| "input-current-limiting", |
| "temperature-change", |
| "switcher-power-ok"; |
| }; |
| }; |
| |
| pmi8998_pdphy: qcom,usb-pdphy@1700 { |
| compatible = "qcom,qpnp-pdphy"; |
| reg = <0x1700 0x100>; |
| vdd-pdphy-supply = <&pm8998_l24>; |
| vbus-supply = <&ext_5v_boost>; |
| vconn-supply = <&smb2_vconn>; |
| interrupts = <0x2 0x17 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x17 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x17 0x2 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x17 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x17 0x4 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x17 0x5 IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x17 0x6 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "sig-tx", |
| "sig-rx", |
| "msg-tx", |
| "msg-rx", |
| "msg-tx-failed", |
| "msg-tx-discarded", |
| "msg-rx-discarded"; |
| |
| qcom,default-sink-caps = <5000 3000>, /* 5V @ 3A */ |
| <9000 3000>, /* 9V @ 3A */ |
| <12000 2250>; /* 12V @ 2.25A */ |
| }; |
| |
| bcl_sensor: bcl@4200 { |
| compatible = "qcom,msm-bcl-lmh"; |
| reg = <0x4200 0xff>, |
| <0x4300 0xff>; |
| reg-names = "fg_user_adc", |
| "fg_lmh"; |
| interrupts = <0x2 0x42 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x42 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x42 0x2 IRQ_TYPE_NONE>, |
| <0x2 0x42 0x3 IRQ_TYPE_NONE>, |
| <0x2 0x42 0x4 IRQ_TYPE_NONE>; |
| interrupt-names = "bcl-high-ibat", |
| "bcl-very-high-ibat", |
| "bcl-low-vbat", |
| "bcl-very-low-vbat", |
| "bcl-crit-low-vbat"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| pmi8998_rradc: rradc@4500 { |
| compatible = "qcom,rradc"; |
| reg = <0x4500 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #io-channel-cells = <1>; |
| qcom,pmic-revid = <&pmi8998_revid>; |
| }; |
| |
| pmi8998_fg: qpnp,fg { |
| compatible = "qcom,fg-gen3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,pmic-revid = <&pmi8998_revid>; |
| io-channels = <&pmi8998_rradc 0>; |
| io-channel-names = "rradc_batt_id"; |
| qcom,rradc-base = <0x4500>; |
| qcom,fg-esr-timer-awake = <96 96>; |
| qcom,fg-esr-timer-asleep = <256 256>; |
| qcom,fg-esr-timer-charging = <0 96>; |
| qcom,cycle-counter-en; |
| qcom,hold-soc-while-full; |
| qcom,fg-auto-recharge-soc; |
| qcom,fg-recharge-soc-thr = <98>; |
| status = "okay"; |
| |
| qcom,fg-batt-soc@4000 { |
| status = "okay"; |
| reg = <0x4000 0x100>; |
| interrupts = <0x2 0x40 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x40 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x40 0x2 |
| IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x40 0x3 |
| IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x40 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x40 0x5 |
| IRQ_TYPE_EDGE_RISING>, |
| <0x2 0x40 0x6 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x40 0x7 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "soc-update", |
| "soc-ready", |
| "bsoc-delta", |
| "msoc-delta", |
| "msoc-low", |
| "msoc-empty", |
| "msoc-high", |
| "msoc-full"; |
| }; |
| |
| qcom,fg-batt-info@4100 { |
| status = "okay"; |
| reg = <0x4100 0x100>; |
| interrupts = <0x2 0x41 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x41 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x41 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x41 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x41 0x6 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "vbatt-pred-delta", |
| "vbatt-low", |
| "esr-delta", |
| "batt-missing", |
| "batt-temp-delta"; |
| }; |
| |
| qcom,fg-memif@4400 { |
| status = "okay"; |
| reg = <0x4400 0x100>; |
| interrupts = <0x2 0x44 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x44 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x2 0x44 0x2 |
| IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ima-rdy", |
| "mem-xcp", |
| "dma-grant"; |
| }; |
| }; |
| }; |
| |
| pmi8998_lsid1: qcom,pmi8998@3 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x3 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| pmi8998_pwm_1: pwm@b100 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb100 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", |
| "qpnp-lpg-lut-base"; |
| qcom,lpg-lut-size = <0x7e>; |
| qcom,channel-id = <1>; |
| qcom,supported-sizes = <6>, <9>; |
| qcom,ramp-index = <0>; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pmi8998_pwm_2: pwm@b200 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb200 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", |
| "qpnp-lpg-lut-base"; |
| qcom,lpg-lut-size = <0x7e>; |
| qcom,channel-id = <2>; |
| qcom,supported-sizes = <6>, <9>; |
| qcom,ramp-index = <1>; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pmi8998_pwm_3: pwm@b300 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb300 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", |
| "qpnp-lpg-lut-base"; |
| qcom,lpg-lut-size = <0x7e>; |
| qcom,channel-id = <3>; |
| qcom,supported-sizes = <6>, <9>; |
| qcom,ramp-index = <2>; |
| #pwm-cells = <2>; |
| }; |
| |
| pmi8998_pwm_4: pwm@b400 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb400 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", |
| "qpnp-lpg-lut-base"; |
| qcom,lpg-lut-size = <0x7e>; |
| qcom,channel-id = <4>; |
| qcom,supported-sizes = <6>, <9>; |
| qcom,ramp-index = <3>; |
| #pwm-cells = <2>; |
| }; |
| |
| pmi8998_pwm_5: pwm@b500 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb500 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", |
| "qpnp-lpg-lut-base"; |
| qcom,lpg-lut-size = <0x7e>; |
| qcom,channel-id = <5>; |
| qcom,supported-sizes = <6>, <9>; |
| qcom,ramp-index = <4>; |
| #pwm-cells = <2>; |
| }; |
| |
| pmi8998_pwm_6: pwm@b600 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb600 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", |
| "qpnp-lpg-lut-base"; |
| qcom,lpg-lut-size = <0x7e>; |
| qcom,channel-id = <6>; |
| qcom,supported-sizes = <6>, <9>; |
| qcom,ramp-index = <5>; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| qcom,leds@d000 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd000 0x100>; |
| label = "rgb"; |
| status = "okay"; |
| |
| red_led: qcom,rgb_0 { |
| label = "rgb"; |
| qcom,id = <3>; |
| qcom,mode = "pwm"; |
| pwms = <&pmi8998_pwm_5 0 0>; |
| qcom,pwm-us = <1000>; |
| qcom,max-current = <12>; |
| qcom,default-state = "off"; |
| linux,name = "red"; |
| }; |
| |
| green_led: qcom,rgb_1 { |
| label = "rgb"; |
| qcom,id = <4>; |
| qcom,mode = "pwm"; |
| pwms = <&pmi8998_pwm_4 0 0>; |
| qcom,pwm-us = <1000>; |
| qcom,max-current = <12>; |
| qcom,default-state = "off"; |
| linux,name = "green"; |
| }; |
| |
| blue_led: qcom,rgb_2 { |
| label = "rgb"; |
| qcom,id = <5>; |
| qcom,mode = "pwm"; |
| pwms = <&pmi8998_pwm_3 0 0>; |
| qcom,pwm-us = <1000>; |
| qcom,max-current = <12>; |
| qcom,default-state = "off"; |
| linux,name = "blue"; |
| }; |
| }; |
| |
| labibb: qpnp-labibb-regulator { |
| compatible = "qcom,qpnp-labibb-regulator"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,pmic-revid = <&pmi8998_revid>; |
| status = "disabled"; |
| |
| ibb_regulator: qcom,ibb@dc00 { |
| reg = <0xdc00 0x100>; |
| reg-names = "ibb_reg"; |
| regulator-name = "ibb_reg"; |
| |
| regulator-min-microvolt = <4600000>; |
| regulator-max-microvolt = <6000000>; |
| |
| interrupts = <0x3 0xdc 0x2 |
| IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ibb-sc-err"; |
| |
| qcom,qpnp-ibb-min-voltage = <1400000>; |
| qcom,qpnp-ibb-step-size = <100000>; |
| qcom,qpnp-ibb-slew-rate = <2000000>; |
| qcom,qpnp-ibb-use-default-voltage; |
| qcom,qpnp-ibb-init-voltage = <5500000>; |
| qcom,qpnp-ibb-init-amoled-voltage = <4000000>; |
| qcom,qpnp-ibb-init-lcd-voltage = <5500000>; |
| |
| qcom,qpnp-ibb-soft-start = <1000>; |
| |
| qcom,qpnp-ibb-lab-pwrup-delay = <8000>; |
| qcom,qpnp-ibb-lab-pwrdn-delay = <8000>; |
| qcom,qpnp-ibb-en-discharge; |
| |
| qcom,qpnp-ibb-full-pull-down; |
| qcom,qpnp-ibb-pull-down-enable; |
| qcom,qpnp-ibb-switching-clock-frequency = |
| <1480>; |
| qcom,qpnp-ibb-limit-maximum-current = <1550>; |
| qcom,qpnp-ibb-debounce-cycle = <16>; |
| qcom,qpnp-ibb-limit-max-current-enable; |
| qcom,qpnp-ibb-ps-enable; |
| }; |
| |
| lab_regulator: qcom,lab@de00 { |
| reg = <0xde00 0x100>; |
| reg-names = "lab"; |
| regulator-name = "lab_reg"; |
| |
| regulator-min-microvolt = <4600000>; |
| regulator-max-microvolt = <6000000>; |
| |
| interrupts = <0x3 0xde 0x0 |
| IRQ_TYPE_EDGE_RISING>, |
| <0x3 0xde 0x1 |
| IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "lab-vreg-ok", "lab-sc-err"; |
| |
| qcom,qpnp-lab-min-voltage = <4600000>; |
| qcom,qpnp-lab-step-size = <100000>; |
| qcom,qpnp-lab-slew-rate = <5000>; |
| qcom,qpnp-lab-use-default-voltage; |
| qcom,qpnp-lab-init-voltage = <5500000>; |
| qcom,qpnp-lab-init-amoled-voltage = <4600000>; |
| qcom,qpnp-lab-init-lcd-voltage = <5500000>; |
| |
| qcom,qpnp-lab-soft-start = <800>; |
| |
| qcom,qpnp-lab-full-pull-down; |
| qcom,qpnp-lab-pull-down-enable; |
| qcom,qpnp-lab-switching-clock-frequency = |
| <1600>; |
| qcom,qpnp-lab-limit-maximum-current = <1600>; |
| qcom,qpnp-lab-limit-max-current-enable; |
| qcom,qpnp-lab-ps-threshold = <70>; |
| qcom,qpnp-lab-ps-enable; |
| qcom,qpnp-lab-nfet-size = <100>; |
| qcom,qpnp-lab-pfet-size = <100>; |
| qcom,qpnp-lab-max-precharge-time = <500>; |
| }; |
| }; |
| |
| pmi8998_wled: qcom,leds@d800 { |
| compatible = "qcom,qpnp-wled"; |
| reg = <0xd800 0x100>, |
| <0xd900 0x100>; |
| reg-names = "qpnp-wled-ctrl-base", |
| "qpnp-wled-sink-base"; |
| interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ovp-irq", "sc-irq"; |
| linux,name = "wled"; |
| linux,default-trigger = "bkl-trigger"; |
| qcom,fdbk-output = "auto"; |
| qcom,vref-uv = <127500>; |
| qcom,switch-freq-khz = <800>; |
| qcom,ovp-mv = <29600>; |
| qcom,ilim-ma = <970>; |
| qcom,boost-duty-ns = <26>; |
| qcom,mod-freq-khz = <9600>; |
| qcom,dim-mode = "hybrid"; |
| qcom,hyb-thres = <625>; |
| qcom,sync-dly-us = <800>; |
| qcom,fs-curr-ua = <25000>; |
| qcom,cons-sync-write-delay-us = <1000>; |
| qcom,led-strings-list = [00 01 02 03]; |
| qcom,en-ext-pfet-sc-pro; |
| qcom,pmic-revid = <&pmi8998_revid>; |
| qcom,loop-auto-gm-en; |
| qcom,auto-calibration-enable; |
| status = "disabled"; |
| }; |
| |
| flash_led: qcom,leds@d300 { |
| compatible = "qcom,qpnp-flash-led-v2"; |
| status = "okay"; |
| reg = <0xd300 0x100>; |
| label = "flash"; |
| interrupts = <0x3 0xd3 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x3 0xd3 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x3 0xd3 0x4 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "led-fault-irq", |
| "all-ramp-down-done-irq", |
| "all-ramp-up-done-irq"; |
| qcom,hdrm-auto-mode; |
| qcom,short-circuit-det; |
| qcom,open-circuit-det; |
| qcom,vph-droop-det; |
| qcom,thermal-derate-en; |
| qcom,thermal-derate-current = <200 500 1000>; |
| qcom,isc-delay = <192>; |
| qcom,pmic-revid = <&pmi8998_revid>; |
| |
| pmi8998_flash0: qcom,flash_0 { |
| label = "flash"; |
| qcom,led-name = "led:flash_0"; |
| qcom,max-current = <1500>; |
| qcom,default-led-trigger = "flash0_trigger"; |
| qcom,id = <0>; |
| qcom,current-ma = <1000>; |
| qcom,duration-ms = <1280>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pmi8998_flash1: qcom,flash_1 { |
| label = "flash"; |
| qcom,led-name = "led:flash_1"; |
| qcom,max-current = <1500>; |
| qcom,default-led-trigger = "flash1_trigger"; |
| qcom,id = <1>; |
| qcom,current-ma = <1000>; |
| qcom,duration-ms = <1280>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pmi8998_flash2: qcom,flash_2 { |
| label = "flash"; |
| qcom,led-name = "led:flash_2"; |
| qcom,max-current = <750>; |
| qcom,default-led-trigger = "flash2_trigger"; |
| qcom,id = <2>; |
| qcom,current-ma = <500>; |
| qcom,duration-ms = <1280>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pmi8998_torch0: qcom,torch_0 { |
| label = "torch"; |
| qcom,led-name = "led:torch_0"; |
| qcom,max-current = <500>; |
| qcom,default-led-trigger = "torch0_trigger"; |
| qcom,id = <0>; |
| qcom,current-ma = <300>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pmi8998_torch1: qcom,torch_1 { |
| label = "torch"; |
| qcom,led-name = "led:torch_1"; |
| qcom,max-current = <500>; |
| qcom,default-led-trigger = "torch1_trigger"; |
| qcom,id = <1>; |
| qcom,current-ma = <300>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pmi8998_torch2: qcom,torch_2 { |
| label = "torch"; |
| qcom,led-name = "led:torch_2"; |
| qcom,max-current = <500>; |
| qcom,default-led-trigger = "torch2_trigger"; |
| qcom,id = <2>; |
| qcom,current-ma = <300>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pmi8998_switch0: qcom,led_switch_0 { |
| label = "switch"; |
| qcom,led-name = "led:switch_0"; |
| qcom,led-mask = <3>; |
| qcom,default-led-trigger = "switch0_trigger"; |
| }; |
| |
| pmi8998_switch1: qcom,led_switch_1 { |
| label = "switch"; |
| qcom,led-name = "led:switch_1"; |
| qcom,led-mask = <4>; |
| qcom,default-led-trigger = "switch1_trigger"; |
| }; |
| |
| pmi8998_switch2: qcom,led_switch_2 { |
| label = "switch"; |
| qcom,led-name = "led:switch_2"; |
| qcom,led-mask = <4>; |
| qcom,default-led-trigger = "switch2_trigger"; |
| }; |
| |
| }; |
| |
| pmi8998_haptics: qcom,haptics@c000 { |
| compatible = "qcom,qpnp-haptics"; |
| reg = <0xc000 0x100>; |
| interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "hap-sc-irq", "hap-play-irq"; |
| qcom,pmic-revid = <&pmi8998_revid>; |
| qcom,pmic-misc = <&pmi8998_misc>; |
| qcom,misc-clk-trim-error-reg = <0xf3>; |
| qcom,actuator-type = <0>; |
| qcom,play-mode = "direct"; |
| qcom,vmax-mv = <3200>; |
| qcom,ilim-ma = <800>; |
| qcom,sc-dbc-cycles = <8>; |
| qcom,wave-play-rate-us = <6667>; |
| qcom,en-brake; |
| qcom,lra-high-z = "opt1"; |
| qcom,lra-auto-res-mode = "qwd"; |
| qcom,lra-res-cal-period = <4>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &thermal_zones { |
| ibat-high { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "step_wise"; |
| thermal-sensors = <&bcl_sensor 0>; |
| wake-capable-sensor; |
| |
| trips { |
| ibat_high: low-ibat { |
| temperature = <5000>; |
| hysteresis = <200>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| ibat-vhigh { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "step_wise"; |
| thermal-sensors = <&bcl_sensor 1>; |
| wake-capable-sensor; |
| |
| trips { |
| ibat_vhigh: ibat_vhigh { |
| temperature = <6000>; |
| hysteresis = <100>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| vbat { |
| polling-delay-passive = <100>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 2>; |
| wake-capable-sensor; |
| tracks-low; |
| |
| trips { |
| low_vbat: low-vbat { |
| temperature = <3200>; |
| hysteresis = <100>; |
| type = "passive"; |
| }; |
| }; |
| cooling-maps { |
| vbat_cpu4 { |
| trip = <&low_vbat>; |
| cooling-device = |
| <&CPU4 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| vbat_cpu5 { |
| trip = <&low_vbat>; |
| cooling-device = |
| <&CPU5 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| vbat_map6 { |
| trip = <&low_vbat>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| vbat_map7 { |
| trip = <&low_vbat>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| vbat_low { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 3>; |
| wake-capable-sensor; |
| tracks-low; |
| |
| trips { |
| low-vbat { |
| temperature = <2800>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| vbat_too_low { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 4>; |
| wake-capable-sensor; |
| tracks-low; |
| |
| trips { |
| low-vbat { |
| temperature = <2600>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| soc { |
| polling-delay-passive = <100>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 5>; |
| wake-capable-sensor; |
| tracks-low; |
| |
| trips { |
| low_soc: low-soc { |
| temperature = <10>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| cooling-maps { |
| soc_cpu4 { |
| trip = <&low_soc>; |
| cooling-device = |
| <&CPU4 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| soc_cpu5 { |
| trip = <&low_soc>; |
| cooling-device = |
| <&CPU5 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| soc_map6 { |
| trip = <&low_soc>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| soc_map7 { |
| trip = <&low_soc>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| |
| pmi8998_tz { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pmi8998_tz>; |
| wake-capable-sensor; |
| |
| trips { |
| pmi8998_trip0: pmi8998-trip0 { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| pmi8998_trip1: pmi8998-trip1 { |
| temperature = <125000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| pmi8998_trip2: pmi8998-trip2 { |
| temperature = <145000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |