drivers/ata/pata_qdi.c - kernel/msm-4.9 - Gitiles

 /*
  *    pata_qdi.c - QDI VLB ATA controllers
  *	(C) 2006 Red Hat <alan@redhat.com>
  *
  * This driver mostly exists as a proof of concept for non PCI devices under
  * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
  * useful.
  *
  * Tuning code written from the documentation at
  * http://www.ryston.cz/petr/vlb/qd6500.html
  * http://www.ryston.cz/petr/vlb/qd6580.html
  *
  * Probe code based on drivers/ide/legacy/qd65xx.c
  * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
  * Samuel Thibault <samuel.thibault@fnac.net>
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
 #include <linux/platform_device.h>

 #define DRV_NAME "pata_qdi"
 #define DRV_VERSION "0.2.4"

 #define NR_HOST 4	/* Two 6580s */

 struct qdi_data {
 	unsigned long timing;
 	u8 clock[2];
 	u8 last;
 	int fast;
 	struct platform_device *platform_dev;

 };

 static struct ata_host *qdi_host[NR_HOST];
 static struct qdi_data qdi_data[NR_HOST];
 static int nr_qdi_host;

 #ifdef MODULE
 static int probe_qdi = 1;
 #else
 static int probe_qdi;
 #endif

 static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct ata_timing t;
 	struct qdi_data *qdi = ap->host->private_data;
 	int active, recovery;
 	u8 timing;

 	/* Get the timing data in cycles */
 	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);

 	if (qdi->fast) {
 		active = 8 - FIT(t.active, 1, 8);
 		recovery = 18 - FIT(t.recover, 3, 18);
 	} else {
 		active = 9 - FIT(t.active, 2, 9);
 		recovery = 15 - FIT(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;

 	qdi->clock[adev->devno] = timing;

 	outb(timing, qdi->timing);
 }

 static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct ata_timing t;
 	struct qdi_data *qdi = ap->host->private_data;
 	int active, recovery;
 	u8 timing;

 	/* Get the timing data in cycles */
 	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);

 	if (qdi->fast) {
 		active = 8 - FIT(t.active, 1, 8);
 		recovery = 18 - FIT(t.recover, 3, 18);
 	} else {
 		active = 9 - FIT(t.active, 2, 9);
 		recovery = 15 - FIT(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;

 	qdi->clock[adev->devno] = timing;

 	outb(timing, qdi->timing);

 	/* Clear the FIFO */
 	if (adev->class != ATA_DEV_ATA)
 		outb(0x5F, (qdi->timing & 0xFFF0) + 3);
 }

 /**
  *	qdi_qc_issue_prot	-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings.
  */

 static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
 	struct qdi_data *qdi = ap->host->private_data;

 	if (qdi->clock[adev->devno] != qdi->last) {
 		if (adev->pio_mode) {
 			qdi->last = qdi->clock[adev->devno];
 			outb(qdi->clock[adev->devno], qdi->timing);
 		}
 	}
 	return ata_qc_issue_prot(qc);
 }

 static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
 {
 	struct ata_port *ap = adev->ap;
 	int slop = buflen & 3;

 	if (ata_id_has_dword_io(adev->id)) {
 		if (write_data)
 			outsl(ap->ioaddr.data_addr, buf, buflen >> 2);
 		else
 			insl(ap->ioaddr.data_addr, buf, buflen >> 2);

 		if (unlikely(slop)) {
 			u32 pad;
 			if (write_data) {
 				memcpy(&pad, buf + buflen - slop, slop);
 				outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
 			} else {
 				pad = cpu_to_le32(inl(ap->ioaddr.data_addr));
 				memcpy(buf + buflen - slop, &pad, slop);
 			}
 		}
 	} else
 		ata_pio_data_xfer(adev, buf, buflen, write_data);
 }

 static struct scsi_host_template qdi_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
 	.ioctl			= ata_scsi_ioctl,
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
 	.bios_param		= ata_std_bios_param,
 };

 static struct ata_port_operations qdi6500_port_ops = {
 	.port_disable	= ata_port_disable,
 	.set_piomode	= qdi6500_set_piomode,

 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,

 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,

 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= qdi_qc_issue_prot,

 	.data_xfer	= qdi_data_xfer,

 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,

 	.port_start	= ata_port_start,
 	.port_stop	= ata_port_stop,
 	.host_stop	= ata_host_stop
 };

 static struct ata_port_operations qdi6580_port_ops = {
 	.port_disable	= ata_port_disable,
 	.set_piomode	= qdi6580_set_piomode,

 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,

 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,

 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= qdi_qc_issue_prot,

 	.data_xfer	= qdi_data_xfer,

 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,

 	.port_start	= ata_port_start,
 	.port_stop	= ata_port_stop,
 	.host_stop	= ata_host_stop
 };

 /**
  *	qdi_init_one		-	attach a qdi interface
  *	@type: Type to display
  *	@io: I/O port start
  *	@irq: interrupt line
  *	@fast: True if on a > 33Mhz VLB
  *
  *	Register an ISA bus IDE interface. Such interfaces are PIO and we
  *	assume do not support IRQ sharing.
  */

 static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
 {
 	struct ata_probe_ent ae;
 	struct platform_device *pdev;
 	int ret;

 	unsigned long ctrl = io + 0x206;

 	/*
 	 *	Fill in a probe structure first of all
 	 */

 	pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
 	if (pdev == NULL)
 		return -ENOMEM;

 	memset(&ae, 0, sizeof(struct ata_probe_ent));
 	INIT_LIST_HEAD(&ae.node);
 	ae.dev = &pdev->dev;

 	if (type == 6580) {
 		ae.port_ops = &qdi6580_port_ops;
 		ae.pio_mask = 0x1F;
 	} else {
 		ae.port_ops = &qdi6500_port_ops;
 		ae.pio_mask = 0x07;	/* Actually PIO3 !IORDY is possible */
 	}

 	ae.sht = &qdi_sht;
 	ae.n_ports = 1;
 	ae.irq = irq;
 	ae.irq_flags = 0;
 	ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
 	ae.port[0].cmd_addr = io;
 	ae.port[0].altstatus_addr = ctrl;
 	ae.port[0].ctl_addr =	ctrl;
 	ata_std_ports(&ae.port[0]);

 	/*
 	 *	Hook in a private data structure per channel
 	 */
 	ae.private_data = &qdi_data[nr_qdi_host];

 	qdi_data[nr_qdi_host].timing = port;
 	qdi_data[nr_qdi_host].fast = fast;
 	qdi_data[nr_qdi_host].platform_dev = pdev;

 	printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
 	ret = ata_device_add(&ae);
 	if (ret == 0) {
 		platform_device_unregister(pdev);
 		return -ENODEV;
 	}

 	qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
 	return 0;
 }

 /**
  *	qdi_init		-	attach qdi interfaces
  *
  *	Attach qdi IDE interfaces by scanning the ports it may occupy.
  */

 static __init int qdi_init(void)
 {
 	unsigned long flags;
 	static const unsigned long qd_port[2] = { 0x30, 0xB0 };
 	static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
 	static const int ide_irq[2] = { 14, 15 };

 	int ct = 0;
 	int i;

 	if (probe_qdi == 0)
 		return -ENODEV;

 	/*
  	 *	Check each possible QD65xx base address
 	 */

 	for (i = 0; i < 2; i++) {
 		unsigned long port = qd_port[i];
 		u8 r, res;


 		if (request_region(port, 2, "pata_qdi")) {
 			/* Check for a card */
 			local_irq_save(flags);
 			r = inb_p(port);
 			outb_p(0x19, port);
 			res = inb_p(port);
 			outb_p(r, port);
 			local_irq_restore(flags);

 			/* Fail */
 			if (res == 0x19)
 			{
 				release_region(port, 2);
 				continue;
 			}

 			/* Passes the presence test */
 			r = inb_p(port + 1);	/* Check port agrees with port set */
 			if ((r & 2) >> 1 != i) {
 				release_region(port, 2);
 				continue;
 			}

 			/* Check card type */
 			if ((r & 0xF0) == 0xC0) {
 				/* QD6500: single channel */
 				if (r & 8) {
 					/* Disabled ? */
 					release_region(port, 2);
 					continue;
 				}
 				ct += qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
 			}
 			if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
 				/* QD6580: dual channel */
 				if (!request_region(port + 2 , 2, "pata_qdi"))
 				{
 					release_region(port, 2);
 					continue;
 				}
 				res = inb(port + 3);
 				if (res & 1) {
 					/* Single channel mode */
 					ct += qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
 				} else {
 					/* Dual channel mode */
 					ct += qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04);
 					ct += qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04);
 				}
 			}
 		}
 	}
 	if (ct != 0)
 		return 0;
 	return -ENODEV;
 }

 static __exit void qdi_exit(void)
 {
 	int i;

 	for (i = 0; i < nr_qdi_host; i++) {
 		ata_host_remove(qdi_host[i]);
 		/* Free the control resource. The 6580 dual channel has the resources
 		 * claimed as a pair of 2 byte resources so we need no special cases...
 		 */
 		release_region(qdi_data[i].timing, 2);
 		platform_device_unregister(qdi_data[i].platform_dev);
 	}
 }

 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for qdi ATA");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);

 module_init(qdi_init);
 module_exit(qdi_exit);

 module_param(probe_qdi, int, 0);
	/*
	* pata_qdi.c - QDI VLB ATA controllers
	* (C) 2006 Red Hat <alan@redhat.com>
	*
	* This driver mostly exists as a proof of concept for non PCI devices under
	* libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
	* useful.
	*
	* Tuning code written from the documentation at
	* http://www.ryston.cz/petr/vlb/qd6500.html
	* http://www.ryston.cz/petr/vlb/qd6580.html
	*
	* Probe code based on drivers/ide/legacy/qd65xx.c
	* Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
	* Samuel Thibault <samuel.thibault@fnac.net>
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/init.h>
	#include <linux/blkdev.h>
	#include <linux/delay.h>
	#include <scsi/scsi_host.h>
	#include <linux/libata.h>
	#include <linux/platform_device.h>

	#define DRV_NAME "pata_qdi"
	#define DRV_VERSION "0.2.4"

	#define NR_HOST 4 /* Two 6580s */

	struct qdi_data {
	unsigned long timing;
	u8 clock[2];
	u8 last;
	int fast;
	struct platform_device *platform_dev;

	};

	static struct ata_host *qdi_host[NR_HOST];
	static struct qdi_data qdi_data[NR_HOST];
	static int nr_qdi_host;

	#ifdef MODULE
	static int probe_qdi = 1;
	#else
	static int probe_qdi;
	#endif

	static void qdi6500_set_piomode(struct ata_port ap, struct ata_device adev)
	{
	struct ata_timing t;
	struct qdi_data *qdi = ap->host->private_data;
	int active, recovery;
	u8 timing;

	/* Get the timing data in cycles */
	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);

	if (qdi->fast) {
	active = 8 - FIT(t.active, 1, 8);
	recovery = 18 - FIT(t.recover, 3, 18);
	} else {
	active = 9 - FIT(t.active, 2, 9);
	recovery = 15 - FIT(t.recover, 0, 15);
	}
	timing = (recovery << 4) \| active \| 0x08;

	qdi->clock[adev->devno] = timing;

	outb(timing, qdi->timing);
	}

	static void qdi6580_set_piomode(struct ata_port ap, struct ata_device adev)
	{
	struct ata_timing t;
	struct qdi_data *qdi = ap->host->private_data;
	int active, recovery;
	u8 timing;

	/* Get the timing data in cycles */
	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);

	if (qdi->fast) {
	active = 8 - FIT(t.active, 1, 8);
	recovery = 18 - FIT(t.recover, 3, 18);
	} else {
	active = 9 - FIT(t.active, 2, 9);
	recovery = 15 - FIT(t.recover, 0, 15);
	}
	timing = (recovery << 4) \| active \| 0x08;

	qdi->clock[adev->devno] = timing;

	outb(timing, qdi->timing);

	/* Clear the FIFO */
	if (adev->class != ATA_DEV_ATA)
	outb(0x5F, (qdi->timing & 0xFFF0) + 3);
	}

	/**
	* qdi_qc_issue_prot - command issue
	* @qc: command pending
	*
	* Called when the libata layer is about to issue a command. We wrap
	* this interface so that we can load the correct ATA timings.
	*/

	static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
	{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;
	struct qdi_data *qdi = ap->host->private_data;

	if (qdi->clock[adev->devno] != qdi->last) {
	if (adev->pio_mode) {
	qdi->last = qdi->clock[adev->devno];
	outb(qdi->clock[adev->devno], qdi->timing);
	}
	}
	return ata_qc_issue_prot(qc);
	}

	static void qdi_data_xfer(struct ata_device adev, unsigned char buf, unsigned int buflen, int write_data)
	{
	struct ata_port *ap = adev->ap;
	int slop = buflen & 3;

	if (ata_id_has_dword_io(adev->id)) {
	if (write_data)
	outsl(ap->ioaddr.data_addr, buf, buflen >> 2);
	else
	insl(ap->ioaddr.data_addr, buf, buflen >> 2);

	if (unlikely(slop)) {
	u32 pad;
	if (write_data) {
	memcpy(&pad, buf + buflen - slop, slop);
	outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
	} else {
	pad = cpu_to_le32(inl(ap->ioaddr.data_addr));
	memcpy(buf + buflen - slop, &pad, slop);
	}
	}
	} else
	ata_pio_data_xfer(adev, buf, buflen, write_data);
	}

	static struct scsi_host_template qdi_sht = {
	.module = THIS_MODULE,
	.name = DRV_NAME,
	.ioctl = ata_scsi_ioctl,
	.queuecommand = ata_scsi_queuecmd,
	.can_queue = ATA_DEF_QUEUE,
	.this_id = ATA_SHT_THIS_ID,
	.sg_tablesize = LIBATA_MAX_PRD,
	.max_sectors = ATA_MAX_SECTORS,
	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
	.emulated = ATA_SHT_EMULATED,
	.use_clustering = ATA_SHT_USE_CLUSTERING,
	.proc_name = DRV_NAME,
	.dma_boundary = ATA_DMA_BOUNDARY,
	.slave_configure = ata_scsi_slave_config,
	.bios_param = ata_std_bios_param,
	};

	static struct ata_port_operations qdi6500_port_ops = {
	.port_disable = ata_port_disable,
	.set_piomode = qdi6500_set_piomode,

	.tf_load = ata_tf_load,
	.tf_read = ata_tf_read,
	.check_status = ata_check_status,
	.exec_command = ata_exec_command,
	.dev_select = ata_std_dev_select,

	.freeze = ata_bmdma_freeze,
	.thaw = ata_bmdma_thaw,
	.error_handler = ata_bmdma_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.qc_prep = ata_qc_prep,
	.qc_issue = qdi_qc_issue_prot,

	.data_xfer = qdi_data_xfer,

	.irq_handler = ata_interrupt,
	.irq_clear = ata_bmdma_irq_clear,

	.port_start = ata_port_start,
	.port_stop = ata_port_stop,
	.host_stop = ata_host_stop
	};

	static struct ata_port_operations qdi6580_port_ops = {
	.port_disable = ata_port_disable,
	.set_piomode = qdi6580_set_piomode,

	.tf_load = ata_tf_load,
	.tf_read = ata_tf_read,
	.check_status = ata_check_status,
	.exec_command = ata_exec_command,
	.dev_select = ata_std_dev_select,

	.freeze = ata_bmdma_freeze,
	.thaw = ata_bmdma_thaw,
	.error_handler = ata_bmdma_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.qc_prep = ata_qc_prep,
	.qc_issue = qdi_qc_issue_prot,

	.data_xfer = qdi_data_xfer,

	.irq_handler = ata_interrupt,
	.irq_clear = ata_bmdma_irq_clear,

	.port_start = ata_port_start,
	.port_stop = ata_port_stop,
	.host_stop = ata_host_stop
	};

	/**
	* qdi_init_one - attach a qdi interface
	* @type: Type to display
	* @io: I/O port start
	* @irq: interrupt line
	* @fast: True if on a > 33Mhz VLB
	*
	* Register an ISA bus IDE interface. Such interfaces are PIO and we
	* assume do not support IRQ sharing.
	*/

	static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
	{
	struct ata_probe_ent ae;
	struct platform_device *pdev;
	int ret;

	unsigned long ctrl = io + 0x206;

	/*
	* Fill in a probe structure first of all
	*/

	pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
	if (pdev == NULL)
	return -ENOMEM;

	memset(&ae, 0, sizeof(struct ata_probe_ent));
	INIT_LIST_HEAD(&ae.node);
	ae.dev = &pdev->dev;

	if (type == 6580) {
	ae.port_ops = &qdi6580_port_ops;
	ae.pio_mask = 0x1F;
	} else {
	ae.port_ops = &qdi6500_port_ops;
	ae.pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */
	}

	ae.sht = &qdi_sht;
	ae.n_ports = 1;
	ae.irq = irq;
	ae.irq_flags = 0;
	ae.port_flags = ATA_FLAG_SLAVE_POSS \| ATA_FLAG_SRST;
	ae.port[0].cmd_addr = io;
	ae.port[0].altstatus_addr = ctrl;
	ae.port[0].ctl_addr = ctrl;
	ata_std_ports(&ae.port[0]);

	/*
	* Hook in a private data structure per channel
	*/
	ae.private_data = &qdi_data[nr_qdi_host];

	qdi_data[nr_qdi_host].timing = port;
	qdi_data[nr_qdi_host].fast = fast;
	qdi_data[nr_qdi_host].platform_dev = pdev;

	printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
	ret = ata_device_add(&ae);
	if (ret == 0) {
	platform_device_unregister(pdev);
	return -ENODEV;
	}

	qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
	return 0;
	}

	/**
	* qdi_init - attach qdi interfaces
	*
	* Attach qdi IDE interfaces by scanning the ports it may occupy.
	*/

	static __init int qdi_init(void)
	{
	unsigned long flags;
	static const unsigned long qd_port[2] = { 0x30, 0xB0 };
	static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
	static const int ide_irq[2] = { 14, 15 };

	int ct = 0;
	int i;

	if (probe_qdi == 0)
	return -ENODEV;

	/*
	* Check each possible QD65xx base address
	*/

	for (i = 0; i < 2; i++) {
	unsigned long port = qd_port[i];
	u8 r, res;


	if (request_region(port, 2, "pata_qdi")) {
	/* Check for a card */
	local_irq_save(flags);
	r = inb_p(port);
	outb_p(0x19, port);
	res = inb_p(port);
	outb_p(r, port);
	local_irq_restore(flags);

	/* Fail */
	if (res == 0x19)
	{
	release_region(port, 2);
	continue;
	}

	/* Passes the presence test */
	r = inb_p(port + 1); /* Check port agrees with port set */
	if ((r & 2) >> 1 != i) {
	release_region(port, 2);
	continue;
	}

	/* Check card type */
	if ((r & 0xF0) == 0xC0) {
	/* QD6500: single channel */
	if (r & 8) {
	/* Disabled ? */
	release_region(port, 2);
	continue;
	}
	ct += qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
	}
	if (((r & 0xF0) == 0xA0) \|\| (r & 0xF0) == 0x50) {
	/* QD6580: dual channel */
	if (!request_region(port + 2 , 2, "pata_qdi"))
	{
	release_region(port, 2);
	continue;
	}
	res = inb(port + 3);
	if (res & 1) {
	/* Single channel mode */
	ct += qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
	} else {
	/* Dual channel mode */
	ct += qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04);
	ct += qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04);
	}
	}
	}
	}
	if (ct != 0)
	return 0;
	return -ENODEV;
	}

	static __exit void qdi_exit(void)
	{
	int i;

	for (i = 0; i < nr_qdi_host; i++) {
	ata_host_remove(qdi_host[i]);
	/* Free the control resource. The 6580 dual channel has the resources
	* claimed as a pair of 2 byte resources so we need no special cases...
	*/
	release_region(qdi_data[i].timing, 2);
	platform_device_unregister(qdi_data[i].platform_dev);
	}
	}

	MODULE_AUTHOR("Alan Cox");
	MODULE_DESCRIPTION("low-level driver for qdi ATA");
	MODULE_LICENSE("GPL");
	MODULE_VERSION(DRV_VERSION);

	module_init(qdi_init);
	module_exit(qdi_exit);

	module_param(probe_qdi, int, 0);