| /* |
| * RTC subsystem, dev interface |
| * |
| * Copyright (C) 2005 Tower Technologies |
| * Author: Alessandro Zummo <a.zummo@towertech.it> |
| * |
| * based on arch/arm/common/rtctime.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/rtc.h> |
| #include "rtc-core.h" |
| |
| static dev_t rtc_devt; |
| |
| #define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */ |
| |
| static int rtc_dev_open(struct inode *inode, struct file *file) |
| { |
| int err; |
| struct rtc_device *rtc = container_of(inode->i_cdev, |
| struct rtc_device, char_dev); |
| const struct rtc_class_ops *ops = rtc->ops; |
| |
| if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) |
| return -EBUSY; |
| |
| file->private_data = rtc; |
| |
| err = ops->open ? ops->open(rtc->dev.parent) : 0; |
| if (err == 0) { |
| spin_lock_irq(&rtc->irq_lock); |
| rtc->irq_data = 0; |
| spin_unlock_irq(&rtc->irq_lock); |
| |
| return 0; |
| } |
| |
| /* something has gone wrong */ |
| clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); |
| return err; |
| } |
| |
| #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL |
| /* |
| * Routine to poll RTC seconds field for change as often as possible, |
| * after first RTC_UIE use timer to reduce polling |
| */ |
| static void rtc_uie_task(struct work_struct *work) |
| { |
| struct rtc_device *rtc = |
| container_of(work, struct rtc_device, uie_task); |
| struct rtc_time tm; |
| int num = 0; |
| int err; |
| |
| err = rtc_read_time(rtc, &tm); |
| |
| local_irq_disable(); |
| spin_lock(&rtc->irq_lock); |
| if (rtc->stop_uie_polling || err) { |
| rtc->uie_task_active = 0; |
| } else if (rtc->oldsecs != tm.tm_sec) { |
| num = (tm.tm_sec + 60 - rtc->oldsecs) % 60; |
| rtc->oldsecs = tm.tm_sec; |
| rtc->uie_timer.expires = jiffies + HZ - (HZ/10); |
| rtc->uie_timer_active = 1; |
| rtc->uie_task_active = 0; |
| add_timer(&rtc->uie_timer); |
| } else if (schedule_work(&rtc->uie_task) == 0) { |
| rtc->uie_task_active = 0; |
| } |
| spin_unlock(&rtc->irq_lock); |
| if (num) |
| rtc_update_irq(rtc, num, RTC_UF | RTC_IRQF); |
| local_irq_enable(); |
| } |
| static void rtc_uie_timer(unsigned long data) |
| { |
| struct rtc_device *rtc = (struct rtc_device *)data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&rtc->irq_lock, flags); |
| rtc->uie_timer_active = 0; |
| rtc->uie_task_active = 1; |
| if ((schedule_work(&rtc->uie_task) == 0)) |
| rtc->uie_task_active = 0; |
| spin_unlock_irqrestore(&rtc->irq_lock, flags); |
| } |
| |
| static void clear_uie(struct rtc_device *rtc) |
| { |
| spin_lock_irq(&rtc->irq_lock); |
| if (rtc->irq_active) { |
| rtc->stop_uie_polling = 1; |
| if (rtc->uie_timer_active) { |
| spin_unlock_irq(&rtc->irq_lock); |
| del_timer_sync(&rtc->uie_timer); |
| spin_lock_irq(&rtc->irq_lock); |
| rtc->uie_timer_active = 0; |
| } |
| if (rtc->uie_task_active) { |
| spin_unlock_irq(&rtc->irq_lock); |
| flush_scheduled_work(); |
| spin_lock_irq(&rtc->irq_lock); |
| } |
| rtc->irq_active = 0; |
| } |
| spin_unlock_irq(&rtc->irq_lock); |
| } |
| |
| static int set_uie(struct rtc_device *rtc) |
| { |
| struct rtc_time tm; |
| int err; |
| |
| err = rtc_read_time(rtc, &tm); |
| if (err) |
| return err; |
| spin_lock_irq(&rtc->irq_lock); |
| if (!rtc->irq_active) { |
| rtc->irq_active = 1; |
| rtc->stop_uie_polling = 0; |
| rtc->oldsecs = tm.tm_sec; |
| rtc->uie_task_active = 1; |
| if (schedule_work(&rtc->uie_task) == 0) |
| rtc->uie_task_active = 0; |
| } |
| rtc->irq_data = 0; |
| spin_unlock_irq(&rtc->irq_lock); |
| return 0; |
| } |
| #endif /* CONFIG_RTC_INTF_DEV_UIE_EMUL */ |
| |
| static ssize_t |
| rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) |
| { |
| struct rtc_device *rtc = file->private_data; |
| |
| DECLARE_WAITQUEUE(wait, current); |
| unsigned long data; |
| ssize_t ret; |
| |
| if (count != sizeof(unsigned int) && count < sizeof(unsigned long)) |
| return -EINVAL; |
| |
| add_wait_queue(&rtc->irq_queue, &wait); |
| do { |
| __set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irq(&rtc->irq_lock); |
| data = rtc->irq_data; |
| rtc->irq_data = 0; |
| spin_unlock_irq(&rtc->irq_lock); |
| |
| if (data != 0) { |
| ret = 0; |
| break; |
| } |
| if (file->f_flags & O_NONBLOCK) { |
| ret = -EAGAIN; |
| break; |
| } |
| if (signal_pending(current)) { |
| ret = -ERESTARTSYS; |
| break; |
| } |
| schedule(); |
| } while (1); |
| set_current_state(TASK_RUNNING); |
| remove_wait_queue(&rtc->irq_queue, &wait); |
| |
| if (ret == 0) { |
| /* Check for any data updates */ |
| if (rtc->ops->read_callback) |
| data = rtc->ops->read_callback(rtc->dev.parent, |
| data); |
| |
| if (sizeof(int) != sizeof(long) && |
| count == sizeof(unsigned int)) |
| ret = put_user(data, (unsigned int __user *)buf) ?: |
| sizeof(unsigned int); |
| else |
| ret = put_user(data, (unsigned long __user *)buf) ?: |
| sizeof(unsigned long); |
| } |
| return ret; |
| } |
| |
| static unsigned int rtc_dev_poll(struct file *file, poll_table *wait) |
| { |
| struct rtc_device *rtc = file->private_data; |
| unsigned long data; |
| |
| poll_wait(file, &rtc->irq_queue, wait); |
| |
| data = rtc->irq_data; |
| |
| return (data != 0) ? (POLLIN | POLLRDNORM) : 0; |
| } |
| |
| static long rtc_dev_ioctl(struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int err = 0; |
| struct rtc_device *rtc = file->private_data; |
| const struct rtc_class_ops *ops = rtc->ops; |
| struct rtc_time tm; |
| struct rtc_wkalrm alarm; |
| void __user *uarg = (void __user *) arg; |
| |
| err = mutex_lock_interruptible(&rtc->ops_lock); |
| if (err) |
| return err; |
| |
| /* check that the calling task has appropriate permissions |
| * for certain ioctls. doing this check here is useful |
| * to avoid duplicate code in each driver. |
| */ |
| switch (cmd) { |
| case RTC_EPOCH_SET: |
| case RTC_SET_TIME: |
| if (!capable(CAP_SYS_TIME)) |
| err = -EACCES; |
| break; |
| |
| case RTC_IRQP_SET: |
| if (arg > rtc->max_user_freq && !capable(CAP_SYS_RESOURCE)) |
| err = -EACCES; |
| break; |
| |
| case RTC_PIE_ON: |
| if (rtc->irq_freq > rtc->max_user_freq && |
| !capable(CAP_SYS_RESOURCE)) |
| err = -EACCES; |
| break; |
| } |
| |
| if (err) |
| goto done; |
| |
| /* try the driver's ioctl interface */ |
| if (ops->ioctl) { |
| err = ops->ioctl(rtc->dev.parent, cmd, arg); |
| if (err != -ENOIOCTLCMD) { |
| mutex_unlock(&rtc->ops_lock); |
| return err; |
| } |
| } |
| |
| /* if the driver does not provide the ioctl interface |
| * or if that particular ioctl was not implemented |
| * (-ENOIOCTLCMD), we will try to emulate here. |
| * |
| * Drivers *SHOULD NOT* provide ioctl implementations |
| * for these requests. Instead, provide methods to |
| * support the following code, so that the RTC's main |
| * features are accessible without using ioctls. |
| * |
| * RTC and alarm times will be in UTC, by preference, |
| * but dual-booting with MS-Windows implies RTCs must |
| * use the local wall clock time. |
| */ |
| |
| switch (cmd) { |
| case RTC_ALM_READ: |
| mutex_unlock(&rtc->ops_lock); |
| |
| err = rtc_read_alarm(rtc, &alarm); |
| if (err < 0) |
| return err; |
| |
| if (copy_to_user(uarg, &alarm.time, sizeof(tm))) |
| err = -EFAULT; |
| return err; |
| |
| case RTC_ALM_SET: |
| mutex_unlock(&rtc->ops_lock); |
| |
| if (copy_from_user(&alarm.time, uarg, sizeof(tm))) |
| return -EFAULT; |
| |
| alarm.enabled = 0; |
| alarm.pending = 0; |
| alarm.time.tm_wday = -1; |
| alarm.time.tm_yday = -1; |
| alarm.time.tm_isdst = -1; |
| |
| /* RTC_ALM_SET alarms may be up to 24 hours in the future. |
| * Rather than expecting every RTC to implement "don't care" |
| * for day/month/year fields, just force the alarm to have |
| * the right values for those fields. |
| * |
| * RTC_WKALM_SET should be used instead. Not only does it |
| * eliminate the need for a separate RTC_AIE_ON call, it |
| * doesn't have the "alarm 23:59:59 in the future" race. |
| * |
| * NOTE: some legacy code may have used invalid fields as |
| * wildcards, exposing hardware "periodic alarm" capabilities. |
| * Not supported here. |
| */ |
| { |
| unsigned long now, then; |
| |
| err = rtc_read_time(rtc, &tm); |
| if (err < 0) |
| return err; |
| rtc_tm_to_time(&tm, &now); |
| |
| alarm.time.tm_mday = tm.tm_mday; |
| alarm.time.tm_mon = tm.tm_mon; |
| alarm.time.tm_year = tm.tm_year; |
| err = rtc_valid_tm(&alarm.time); |
| if (err < 0) |
| return err; |
| rtc_tm_to_time(&alarm.time, &then); |
| |
| /* alarm may need to wrap into tomorrow */ |
| if (then < now) { |
| rtc_time_to_tm(now + 24 * 60 * 60, &tm); |
| alarm.time.tm_mday = tm.tm_mday; |
| alarm.time.tm_mon = tm.tm_mon; |
| alarm.time.tm_year = tm.tm_year; |
| } |
| } |
| |
| return rtc_set_alarm(rtc, &alarm); |
| |
| case RTC_RD_TIME: |
| mutex_unlock(&rtc->ops_lock); |
| |
| err = rtc_read_time(rtc, &tm); |
| if (err < 0) |
| return err; |
| |
| if (copy_to_user(uarg, &tm, sizeof(tm))) |
| err = -EFAULT; |
| return err; |
| |
| case RTC_SET_TIME: |
| mutex_unlock(&rtc->ops_lock); |
| |
| if (copy_from_user(&tm, uarg, sizeof(tm))) |
| return -EFAULT; |
| |
| return rtc_set_time(rtc, &tm); |
| |
| case RTC_PIE_ON: |
| err = rtc_irq_set_state(rtc, NULL, 1); |
| break; |
| |
| case RTC_PIE_OFF: |
| err = rtc_irq_set_state(rtc, NULL, 0); |
| break; |
| |
| case RTC_IRQP_SET: |
| err = rtc_irq_set_freq(rtc, NULL, arg); |
| break; |
| |
| case RTC_IRQP_READ: |
| err = put_user(rtc->irq_freq, (unsigned long __user *)uarg); |
| break; |
| |
| #if 0 |
| case RTC_EPOCH_SET: |
| #ifndef rtc_epoch |
| /* |
| * There were no RTC clocks before 1900. |
| */ |
| if (arg < 1900) { |
| err = -EINVAL; |
| break; |
| } |
| rtc_epoch = arg; |
| err = 0; |
| #endif |
| break; |
| |
| case RTC_EPOCH_READ: |
| err = put_user(rtc_epoch, (unsigned long __user *)uarg); |
| break; |
| #endif |
| case RTC_WKALM_SET: |
| mutex_unlock(&rtc->ops_lock); |
| if (copy_from_user(&alarm, uarg, sizeof(alarm))) |
| return -EFAULT; |
| |
| return rtc_set_alarm(rtc, &alarm); |
| |
| case RTC_WKALM_RD: |
| mutex_unlock(&rtc->ops_lock); |
| err = rtc_read_alarm(rtc, &alarm); |
| if (err < 0) |
| return err; |
| |
| if (copy_to_user(uarg, &alarm, sizeof(alarm))) |
| err = -EFAULT; |
| return err; |
| |
| #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL |
| case RTC_UIE_OFF: |
| mutex_unlock(&rtc->ops_lock); |
| clear_uie(rtc); |
| return 0; |
| |
| case RTC_UIE_ON: |
| mutex_unlock(&rtc->ops_lock); |
| err = set_uie(rtc); |
| return err; |
| #endif |
| default: |
| err = -ENOTTY; |
| break; |
| } |
| |
| done: |
| mutex_unlock(&rtc->ops_lock); |
| return err; |
| } |
| |
| static int rtc_dev_release(struct inode *inode, struct file *file) |
| { |
| struct rtc_device *rtc = file->private_data; |
| |
| #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL |
| clear_uie(rtc); |
| #endif |
| rtc_irq_set_state(rtc, NULL, 0); |
| |
| if (rtc->ops->release) |
| rtc->ops->release(rtc->dev.parent); |
| |
| clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); |
| return 0; |
| } |
| |
| static int rtc_dev_fasync(int fd, struct file *file, int on) |
| { |
| struct rtc_device *rtc = file->private_data; |
| return fasync_helper(fd, file, on, &rtc->async_queue); |
| } |
| |
| static const struct file_operations rtc_dev_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .read = rtc_dev_read, |
| .poll = rtc_dev_poll, |
| .unlocked_ioctl = rtc_dev_ioctl, |
| .open = rtc_dev_open, |
| .release = rtc_dev_release, |
| .fasync = rtc_dev_fasync, |
| }; |
| |
| /* insertion/removal hooks */ |
| |
| void rtc_dev_prepare(struct rtc_device *rtc) |
| { |
| if (!rtc_devt) |
| return; |
| |
| if (rtc->id >= RTC_DEV_MAX) { |
| pr_debug("%s: too many RTC devices\n", rtc->name); |
| return; |
| } |
| |
| rtc->dev.devt = MKDEV(MAJOR(rtc_devt), rtc->id); |
| |
| #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL |
| INIT_WORK(&rtc->uie_task, rtc_uie_task); |
| setup_timer(&rtc->uie_timer, rtc_uie_timer, (unsigned long)rtc); |
| #endif |
| |
| cdev_init(&rtc->char_dev, &rtc_dev_fops); |
| rtc->char_dev.owner = rtc->owner; |
| } |
| |
| void rtc_dev_add_device(struct rtc_device *rtc) |
| { |
| if (cdev_add(&rtc->char_dev, rtc->dev.devt, 1)) |
| printk(KERN_WARNING "%s: failed to add char device %d:%d\n", |
| rtc->name, MAJOR(rtc_devt), rtc->id); |
| else |
| pr_debug("%s: dev (%d:%d)\n", rtc->name, |
| MAJOR(rtc_devt), rtc->id); |
| } |
| |
| void rtc_dev_del_device(struct rtc_device *rtc) |
| { |
| if (rtc->dev.devt) |
| cdev_del(&rtc->char_dev); |
| } |
| |
| void __init rtc_dev_init(void) |
| { |
| int err; |
| |
| err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc"); |
| if (err < 0) |
| printk(KERN_ERR "%s: failed to allocate char dev region\n", |
| __FILE__); |
| } |
| |
| void __exit rtc_dev_exit(void) |
| { |
| if (rtc_devt) |
| unregister_chrdev_region(rtc_devt, RTC_DEV_MAX); |
| } |