| /****************************************************************************** |
| * |
| * Module Name: evxfevnt - External Interfaces, ACPI event disable/enable |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2006, R. Byron Moore |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <acpi/acpi.h> |
| #include <acpi/acevents.h> |
| #include <acpi/acnamesp.h> |
| |
| #define _COMPONENT ACPI_EVENTS |
| ACPI_MODULE_NAME("evxfevnt") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_enable |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Transfers the system into ACPI mode. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_enable(void) |
| { |
| acpi_status status = AE_OK; |
| |
| ACPI_FUNCTION_TRACE("acpi_enable"); |
| |
| /* Make sure we have the FADT */ |
| |
| if (!acpi_gbl_FADT) { |
| ACPI_WARNING((AE_INFO, "No FADT information present!")); |
| return_ACPI_STATUS(AE_NO_ACPI_TABLES); |
| } |
| |
| if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INIT, |
| "System is already in ACPI mode\n")); |
| } else { |
| /* Transition to ACPI mode */ |
| |
| status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI); |
| if (ACPI_FAILURE(status)) { |
| ACPI_ERROR((AE_INFO, |
| "Could not transition to ACPI mode")); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INIT, |
| "Transition to ACPI mode successful\n")); |
| } |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_disable |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Transfers the system into LEGACY (non-ACPI) mode. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_disable(void) |
| { |
| acpi_status status = AE_OK; |
| |
| ACPI_FUNCTION_TRACE("acpi_disable"); |
| |
| if (!acpi_gbl_FADT) { |
| ACPI_WARNING((AE_INFO, "No FADT information present!")); |
| return_ACPI_STATUS(AE_NO_ACPI_TABLES); |
| } |
| |
| if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INIT, |
| "System is already in legacy (non-ACPI) mode\n")); |
| } else { |
| /* Transition to LEGACY mode */ |
| |
| status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY); |
| |
| if (ACPI_FAILURE(status)) { |
| ACPI_ERROR((AE_INFO, |
| "Could not exit ACPI mode to legacy mode")); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI mode disabled\n")); |
| } |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_enable_event |
| * |
| * PARAMETERS: Event - The fixed eventto be enabled |
| * Flags - Reserved |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enable an ACPI event (fixed) |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_enable_event(u32 event, u32 flags) |
| { |
| acpi_status status = AE_OK; |
| u32 value; |
| |
| ACPI_FUNCTION_TRACE("acpi_enable_event"); |
| |
| /* Decode the Fixed Event */ |
| |
| if (event > ACPI_EVENT_MAX) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * Enable the requested fixed event (by writing a one to the |
| * enable register bit) |
| */ |
| status = |
| acpi_set_register(acpi_gbl_fixed_event_info[event]. |
| enable_register_id, 1, ACPI_MTX_LOCK); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Make sure that the hardware responded */ |
| |
| status = |
| acpi_get_register(acpi_gbl_fixed_event_info[event]. |
| enable_register_id, &value, ACPI_MTX_LOCK); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| if (value != 1) { |
| ACPI_ERROR((AE_INFO, |
| "Could not enable %s event", |
| acpi_ut_get_event_name(event))); |
| return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); |
| } |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| EXPORT_SYMBOL(acpi_enable_event); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_set_gpe_type |
| * |
| * PARAMETERS: gpe_device - Parent GPE Device |
| * gpe_number - GPE level within the GPE block |
| * Type - New GPE type |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Set the type of an individual GPE |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type) |
| { |
| acpi_status status = AE_OK; |
| struct acpi_gpe_event_info *gpe_event_info; |
| |
| ACPI_FUNCTION_TRACE("acpi_set_gpe_type"); |
| |
| /* Ensure that we have a valid GPE number */ |
| |
| gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); |
| if (!gpe_event_info) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) { |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* Set the new type (will disable GPE if currently enabled) */ |
| |
| status = acpi_ev_set_gpe_type(gpe_event_info, type); |
| |
| unlock_and_exit: |
| return_ACPI_STATUS(status); |
| } |
| |
| EXPORT_SYMBOL(acpi_set_gpe_type); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_enable_gpe |
| * |
| * PARAMETERS: gpe_device - Parent GPE Device |
| * gpe_number - GPE level within the GPE block |
| * Flags - Just enable, or also wake enable? |
| * Called from ISR or not |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enable an ACPI event (general purpose) |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) |
| { |
| acpi_status status = AE_OK; |
| struct acpi_gpe_event_info *gpe_event_info; |
| |
| ACPI_FUNCTION_TRACE("acpi_enable_gpe"); |
| |
| /* Use semaphore lock if not executing at interrupt level */ |
| |
| if (flags & ACPI_NOT_ISR) { |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| } |
| |
| /* Ensure that we have a valid GPE number */ |
| |
| gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); |
| if (!gpe_event_info) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| /* Perform the enable */ |
| |
| status = acpi_ev_enable_gpe(gpe_event_info, TRUE); |
| |
| unlock_and_exit: |
| if (flags & ACPI_NOT_ISR) { |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| } |
| return_ACPI_STATUS(status); |
| } |
| |
| EXPORT_SYMBOL(acpi_enable_gpe); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_disable_gpe |
| * |
| * PARAMETERS: gpe_device - Parent GPE Device |
| * gpe_number - GPE level within the GPE block |
| * Flags - Just disable, or also wake disable? |
| * Called from ISR or not |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Disable an ACPI event (general purpose) |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) |
| { |
| acpi_status status = AE_OK; |
| struct acpi_gpe_event_info *gpe_event_info; |
| |
| ACPI_FUNCTION_TRACE("acpi_disable_gpe"); |
| |
| /* Use semaphore lock if not executing at interrupt level */ |
| |
| if (flags & ACPI_NOT_ISR) { |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| } |
| |
| /* Ensure that we have a valid GPE number */ |
| |
| gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); |
| if (!gpe_event_info) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| status = acpi_ev_disable_gpe(gpe_event_info); |
| |
| unlock_and_exit: |
| if (flags & ACPI_NOT_ISR) { |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| } |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_disable_event |
| * |
| * PARAMETERS: Event - The fixed eventto be enabled |
| * Flags - Reserved |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Disable an ACPI event (fixed) |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_disable_event(u32 event, u32 flags) |
| { |
| acpi_status status = AE_OK; |
| u32 value; |
| |
| ACPI_FUNCTION_TRACE("acpi_disable_event"); |
| |
| /* Decode the Fixed Event */ |
| |
| if (event > ACPI_EVENT_MAX) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * Disable the requested fixed event (by writing a zero to the |
| * enable register bit) |
| */ |
| status = |
| acpi_set_register(acpi_gbl_fixed_event_info[event]. |
| enable_register_id, 0, ACPI_MTX_LOCK); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| status = |
| acpi_get_register(acpi_gbl_fixed_event_info[event]. |
| enable_register_id, &value, ACPI_MTX_LOCK); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| if (value != 0) { |
| ACPI_ERROR((AE_INFO, |
| "Could not disable %s events", |
| acpi_ut_get_event_name(event))); |
| return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); |
| } |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| EXPORT_SYMBOL(acpi_disable_event); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_clear_event |
| * |
| * PARAMETERS: Event - The fixed event to be cleared |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Clear an ACPI event (fixed) |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_clear_event(u32 event) |
| { |
| acpi_status status = AE_OK; |
| |
| ACPI_FUNCTION_TRACE("acpi_clear_event"); |
| |
| /* Decode the Fixed Event */ |
| |
| if (event > ACPI_EVENT_MAX) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * Clear the requested fixed event (By writing a one to the |
| * status register bit) |
| */ |
| status = |
| acpi_set_register(acpi_gbl_fixed_event_info[event]. |
| status_register_id, 1, ACPI_MTX_LOCK); |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| EXPORT_SYMBOL(acpi_clear_event); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_clear_gpe |
| * |
| * PARAMETERS: gpe_device - Parent GPE Device |
| * gpe_number - GPE level within the GPE block |
| * Flags - Called from an ISR or not |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Clear an ACPI event (general purpose) |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) |
| { |
| acpi_status status = AE_OK; |
| struct acpi_gpe_event_info *gpe_event_info; |
| |
| ACPI_FUNCTION_TRACE("acpi_clear_gpe"); |
| |
| /* Use semaphore lock if not executing at interrupt level */ |
| |
| if (flags & ACPI_NOT_ISR) { |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| } |
| |
| /* Ensure that we have a valid GPE number */ |
| |
| gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); |
| if (!gpe_event_info) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| status = acpi_hw_clear_gpe(gpe_event_info); |
| |
| unlock_and_exit: |
| if (flags & ACPI_NOT_ISR) { |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| } |
| return_ACPI_STATUS(status); |
| } |
| |
| #ifdef ACPI_FUTURE_USAGE |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_get_event_status |
| * |
| * PARAMETERS: Event - The fixed event |
| * event_status - Where the current status of the event will |
| * be returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Obtains and returns the current status of the event |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) |
| { |
| acpi_status status = AE_OK; |
| |
| ACPI_FUNCTION_TRACE("acpi_get_event_status"); |
| |
| if (!event_status) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* Decode the Fixed Event */ |
| |
| if (event > ACPI_EVENT_MAX) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* Get the status of the requested fixed event */ |
| |
| status = |
| acpi_get_register(acpi_gbl_fixed_event_info[event]. |
| status_register_id, event_status, ACPI_MTX_LOCK); |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_get_gpe_status |
| * |
| * PARAMETERS: gpe_device - Parent GPE Device |
| * gpe_number - GPE level within the GPE block |
| * Flags - Called from an ISR or not |
| * event_status - Where the current status of the event will |
| * be returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Get status of an event (general purpose) |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_get_gpe_status(acpi_handle gpe_device, |
| u32 gpe_number, u32 flags, acpi_event_status * event_status) |
| { |
| acpi_status status = AE_OK; |
| struct acpi_gpe_event_info *gpe_event_info; |
| |
| ACPI_FUNCTION_TRACE("acpi_get_gpe_status"); |
| |
| /* Use semaphore lock if not executing at interrupt level */ |
| |
| if (flags & ACPI_NOT_ISR) { |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| } |
| |
| /* Ensure that we have a valid GPE number */ |
| |
| gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); |
| if (!gpe_event_info) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| /* Obtain status on the requested GPE number */ |
| |
| status = acpi_hw_get_gpe_status(gpe_event_info, event_status); |
| |
| unlock_and_exit: |
| if (flags & ACPI_NOT_ISR) { |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| } |
| return_ACPI_STATUS(status); |
| } |
| #endif /* ACPI_FUTURE_USAGE */ |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_gpe_block |
| * |
| * PARAMETERS: gpe_device - Handle to the parent GPE Block Device |
| * gpe_block_address - Address and space_iD |
| * register_count - Number of GPE register pairs in the block |
| * interrupt_number - H/W interrupt for the block |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Create and Install a block of GPE registers |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_install_gpe_block(acpi_handle gpe_device, |
| struct acpi_generic_address *gpe_block_address, |
| u32 register_count, u32 interrupt_number) |
| { |
| acpi_status status; |
| union acpi_operand_object *obj_desc; |
| struct acpi_namespace_node *node; |
| struct acpi_gpe_block_info *gpe_block; |
| |
| ACPI_FUNCTION_TRACE("acpi_install_gpe_block"); |
| |
| if ((!gpe_device) || (!gpe_block_address) || (!register_count)) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| node = acpi_ns_map_handle_to_node(gpe_device); |
| if (!node) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| /* |
| * For user-installed GPE Block Devices, the gpe_block_base_number |
| * is always zero |
| */ |
| status = |
| acpi_ev_create_gpe_block(node, gpe_block_address, register_count, 0, |
| interrupt_number, &gpe_block); |
| if (ACPI_FAILURE(status)) { |
| goto unlock_and_exit; |
| } |
| |
| /* Run the _PRW methods and enable the GPEs */ |
| |
| status = acpi_ev_initialize_gpe_block(node, gpe_block); |
| if (ACPI_FAILURE(status)) { |
| goto unlock_and_exit; |
| } |
| |
| /* Get the device_object attached to the node */ |
| |
| obj_desc = acpi_ns_get_attached_object(node); |
| if (!obj_desc) { |
| /* No object, create a new one */ |
| |
| obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE); |
| if (!obj_desc) { |
| status = AE_NO_MEMORY; |
| goto unlock_and_exit; |
| } |
| |
| status = |
| acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE); |
| |
| /* Remove local reference to the object */ |
| |
| acpi_ut_remove_reference(obj_desc); |
| |
| if (ACPI_FAILURE(status)) { |
| goto unlock_and_exit; |
| } |
| } |
| |
| /* Install the GPE block in the device_object */ |
| |
| obj_desc->device.gpe_block = gpe_block; |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| return_ACPI_STATUS(status); |
| } |
| |
| EXPORT_SYMBOL(acpi_install_gpe_block); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_remove_gpe_block |
| * |
| * PARAMETERS: gpe_device - Handle to the parent GPE Block Device |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Remove a previously installed block of GPE registers |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_remove_gpe_block(acpi_handle gpe_device) |
| { |
| union acpi_operand_object *obj_desc; |
| acpi_status status; |
| struct acpi_namespace_node *node; |
| |
| ACPI_FUNCTION_TRACE("acpi_remove_gpe_block"); |
| |
| if (!gpe_device) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| node = acpi_ns_map_handle_to_node(gpe_device); |
| if (!node) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| /* Get the device_object attached to the node */ |
| |
| obj_desc = acpi_ns_get_attached_object(node); |
| if (!obj_desc || !obj_desc->device.gpe_block) { |
| return_ACPI_STATUS(AE_NULL_OBJECT); |
| } |
| |
| /* Delete the GPE block (but not the device_object) */ |
| |
| status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block); |
| if (ACPI_SUCCESS(status)) { |
| obj_desc->device.gpe_block = NULL; |
| } |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| return_ACPI_STATUS(status); |
| } |
| |
| EXPORT_SYMBOL(acpi_remove_gpe_block); |