| What: /sys/class/power/ds2760-battery.*/charge_now |
| Date: May 2010 |
| KernelVersion: 2.6.35 |
| Contact: Daniel Mack <daniel@caiaq.de> |
| Description: |
| This file is writeable and can be used to set the current |
| coloumb counter value inside the battery monitor chip. This |
| is needed for unavoidable corrections of aging batteries. |
| A userspace daemon can monitor the battery charging logic |
| and once the counter drops out of considerable bounds, take |
| appropriate action. |
| |
| What: /sys/class/power/ds2760-battery.*/charge_full |
| Date: May 2010 |
| KernelVersion: 2.6.35 |
| Contact: Daniel Mack <daniel@caiaq.de> |
| Description: |
| This file is writeable and can be used to set the assumed |
| battery 'full level'. As batteries age, this value has to be |
| amended over time. |
| |
| What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer |
| Date: October 2014 |
| KernelVersion: 3.18.0 |
| Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com> |
| Description: |
| This entry shows and sets the maximum time the max14577 |
| charger operates in fast-charge mode. When the timer expires |
| the device will terminate fast-charge mode (charging current |
| will drop to 0 A) and will trigger interrupt. |
| |
| Valid values: |
| - 5, 6 or 7 (hours), |
| - 0: disabled. |
| |
| What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer |
| Date: January 2015 |
| KernelVersion: 3.19.0 |
| Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com> |
| Description: |
| This entry shows and sets the maximum time the max77693 |
| charger operates in fast-charge mode. When the timer expires |
| the device will terminate fast-charge mode (charging current |
| will drop to 0 A) and will trigger interrupt. |
| |
| Valid values: |
| - 4 - 16 (hours), step by 2 (rounded down) |
| - 0: disabled. |
| |
| What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current |
| Date: January 2015 |
| KernelVersion: 3.19.0 |
| Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com> |
| Description: |
| This entry shows and sets the charging current threshold for |
| entering top-off charging mode. When charging current in fast |
| charge mode drops below this value, the charger will trigger |
| interrupt and start top-off charging mode. |
| |
| Valid values: |
| - 100000 - 200000 (microamps), step by 25000 (rounded down) |
| - 200000 - 350000 (microamps), step by 50000 (rounded down) |
| - 0: disabled. |
| |
| What: /sys/class/power_supply/max77693-charger/device/top_off_timer |
| Date: January 2015 |
| KernelVersion: 3.19.0 |
| Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com> |
| Description: |
| This entry shows and sets the maximum time the max77693 |
| charger operates in top-off charge mode. When the timer expires |
| the device will terminate top-off charge mode (charging current |
| will drop to 0 A) and will trigger interrupt. |
| |
| Valid values: |
| - 0 - 70 (minutes), step by 10 (rounded down) |