arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi

/*
 * DTS file for AMD Seattle SoC
 *
 * Copyright (C) 2014 Advanced Micro Devices, Inc.
 */

/ {
	compatible = "amd,seattle";
	interrupt-parent = <&gic0>;
	#address-cells = <2>;
	#size-cells = <2>;

	gic0: interrupt-controller@e1101000 {
		compatible = "arm,gic-400", "arm,cortex-a15-gic";
		interrupt-controller;
		#interrupt-cells = <3>;
		#address-cells = <2>;
		#size-cells = <2>;
		reg = <0x0 0xe1110000 0 0x1000>,
		      <0x0 0xe112f000 0 0x2000>,
		      <0x0 0xe1140000 0 0x2000>,
		      <0x0 0xe1160000 0 0x2000>;
		interrupts = <1 9 0xf04>;
		ranges = <0 0 0 0xe1100000 0 0x100000>;
		v2m0: v2m@e0080000 {
			compatible = "arm,gic-v2m-frame";
			msi-controller;
			reg = <0x0 0x00080000 0 0x1000>;
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <1 13 0xff04>,
			     <1 14 0xff04>,
			     <1 11 0xff04>,
			     <1 10 0xff04>;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <0 7 4>,
			     <0 8 4>,
			     <0 9 4>,
			     <0 10 4>,
			     <0 11 4>,
			     <0 12 4>,
			     <0 13 4>,
			     <0 14 4>;
	};

	smb0: smb {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		/*
		 * dma-ranges is 40-bit address space containing:
		 * - GICv2m MSI register is at 0xe0080000
		 * - DRAM range [0x8000000000 to 0xffffffffff]
		 */
		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;

		/include/ "amd-seattle-clks.dtsi"

		sata0: sata@e0300000 {
			compatible = "snps,dwc-ahci";
			reg = <0 0xe0300000 0 0xf0000>;
			interrupts = <0 355 4>;
			clocks = <&sataclk_333mhz>;
			dma-coherent;
		};

		/* This is for Rev B only */
		sata1: sata@e0d00000 {
			status = "disabled";
			compatible = "snps,dwc-ahci";
			reg = <0 0xe0d00000 0 0xf0000>;
			interrupts = <0 354 4>;
			clocks = <&sataclk_333mhz>;
			dma-coherent;
		};

		i2c0: i2c@e1000000 {
			status = "disabled";
			compatible = "snps,designware-i2c";
			reg = <0 0xe1000000 0 0x1000>;
			interrupts = <0 357 4>;
			clocks = <&miscclk_250mhz>;
		};

		i2c1: i2c@e0050000 {
			status = "disabled";
			compatible = "snps,designware-i2c";
			reg = <0 0xe0050000 0 0x1000>;
			interrupts = <0 340 4>;
			clocks = <&miscclk_250mhz>;
		};

		serial0: serial@e1010000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0 0xe1010000 0 0x1000>;
			interrupts = <0 328 4>;
			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
			clock-names = "uartclk", "apb_pclk";
		};

		spi0: spi@e1020000 {
			status = "disabled";
			compatible = "arm,pl022", "arm,primecell";
			reg = <0 0xe1020000 0 0x1000>;
			spi-controller;
			interrupts = <0 330 4>;
			clocks = <&uartspiclk_100mhz>;
			clock-names = "apb_pclk";
		};

		spi1: spi@e1030000 {
			status = "disabled";
			compatible = "arm,pl022", "arm,primecell";
			reg = <0 0xe1030000 0 0x1000>;
			spi-controller;
			interrupts = <0 329 4>;
			clocks = <&uartspiclk_100mhz>;
			clock-names = "apb_pclk";
			num-cs = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		gpio0: gpio@e1040000 { /* Not available to OS for B0 */
			status = "disabled";
			compatible = "arm,pl061", "arm,primecell";
			#gpio-cells = <2>;
			reg = <0 0xe1040000 0 0x1000>;
			gpio-controller;
			interrupts = <0 359 4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&miscclk_250mhz>;
			clock-names = "apb_pclk";
		};

		gpio1: gpio@e1050000 { /* [0:7] */
			status = "disabled";
			compatible = "arm,pl061", "arm,primecell";
			#gpio-cells = <2>;
			reg = <0 0xe1050000 0 0x1000>;
			gpio-controller;
			interrupt-controller;
			#interrupt-cells = <2>;
			interrupts = <0 358 4>;
			clocks = <&miscclk_250mhz>;
			clock-names = "apb_pclk";
		};

		gpio2: gpio@e0020000 { /* [8:15] */
			status = "disabled";
			compatible = "arm,pl061", "arm,primecell";
			#gpio-cells = <2>;
			reg = <0 0xe0020000 0 0x1000>;
			gpio-controller;
			interrupt-controller;
			#interrupt-cells = <2>;
			interrupts = <0 366 4>;
			clocks = <&miscclk_250mhz>;
			clock-names = "apb_pclk";
		};

		gpio3: gpio@e0030000 { /* [16:23] */
			status = "disabled";
			compatible = "arm,pl061", "arm,primecell";
			#gpio-cells = <2>;
			reg = <0 0xe0030000 0 0x1000>;
			gpio-controller;
			interrupt-controller;
			#interrupt-cells = <2>;
			interrupts = <0 365 4>;
			clocks = <&miscclk_250mhz>;
			clock-names = "apb_pclk";
		};

		gpio4: gpio@e0080000 { /* [24] */
			status = "disabled";
			compatible = "arm,pl061", "arm,primecell";
			#gpio-cells = <2>;
			reg = <0 0xe0080000 0 0x1000>;
			gpio-controller;
			interrupt-controller;
			#interrupt-cells = <2>;
			interrupts = <0 361 4>;
			clocks = <&miscclk_250mhz>;
			clock-names = "apb_pclk";
		};

		ccp0: ccp@e0100000 {
			status = "disabled";
			compatible = "amd,ccp-seattle-v1a";
			reg = <0 0xe0100000 0 0x10000>;
			interrupts = <0 3 4>;
			dma-coherent;
		};

		pcie0: pcie@f0000000 {
			compatible = "pci-host-ecam-generic";
			#address-cells = <3>;
			#size-cells = <2>;
			#interrupt-cells = <1>;
			device_type = "pci";
			bus-range = <0 0x7f>;
			msi-parent = <&v2m0>;
			reg = <0 0xf0000000 0 0x10000000>;

			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map =
				<0x1000 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>,
				<0x1000 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>,
				<0x1000 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>,
				<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;

			dma-coherent;
			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
			ranges =
				/* I/O Memory (size=64K) */
				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
				/* 32-bit MMIO (size=2G) */
				<0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>,
				/* 64-bit MMIO (size= 124G) */
				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
		};

		/* Perf CCN504 PMU */
		ccn: ccn@e8000000 {
			compatible = "arm,ccn-504";
			reg = <0x0 0xe8000000 0 0x1000000>;
			interrupts = <0 380 4>;
		};

		ipmi_kcs: kcs@e0010000 {
			status = "disabled";
			compatible = "ipmi-kcs";
			device_type = "ipmi";
			reg = <0x0 0xe0010000 0 0x8>;
			interrupts = <0 389 4>;
			reg-size = <1>;
			reg-spacing = <4>;
		};
	};
};