| /* Copyright (c) 2014-2016, 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "pm8916-rpm-regulator.dtsi" |
| #include "pm8916.dtsi" |
| #include "msm8916-regulator.dtsi" |
| |
| / { |
| qcom,pmic-id = <0x1000B 0x0 0x0 0x0>; |
| }; |
| |
| &soc { |
| /* remove msm8916 acc/cpr regulator node */ |
| /delete-node/ regulator@1946000; |
| /delete-node/ regulator@b018000; |
| |
| mem_acc_vreg_corner: regulator@1942130 { |
| compatible = "qcom,mem-acc-regulator"; |
| reg = <0x1942130 0x4>; |
| reg-names = "acc-sel-l1"; |
| regulator-name = "mem_acc_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <3>; |
| |
| qcom,acc-sel-l1-bit-pos = <0>; |
| qcom,corner-acc-map = <0 1 1>; |
| }; |
| |
| apc_vreg_corner: regulator@b018000 { |
| compatible = "qcom,cpr-regulator"; |
| reg = <0xb018000 0x1000>, <0xb011064 0x4>, <0x58000 0x1000>; |
| reg-names = "rbcpr", "rbcpr_clk", "efuse_addr"; |
| interrupts = <0 15 0>; |
| regulator-name = "apc_corner"; |
| qcom,cpr-fuse-corners = <3>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <9>; |
| |
| qcom,cpr-voltage-ceiling = <1050000 1225000 1350000>; |
| qcom,cpr-voltage-floor = <1050000 1050000 1155000>; |
| vdd-apc-supply = <&pm8916_s2>; |
| |
| qcom,vdd-mx-corner-map = <4 5 7>; |
| qcom,vdd-mx-vmin-method = <4>; |
| vdd-mx-supply = <&pm8916_l3_corner_ao>; |
| qcom,vdd-mx-vmax = <7>; |
| |
| mem-acc-supply = <&mem_acc_vreg_corner>; |
| |
| qcom,cpr-ref-clk = <19200>; |
| qcom,cpr-timer-delay = <5000>; |
| qcom,cpr-timer-cons-up = <0>; |
| qcom,cpr-timer-cons-down = <2>; |
| qcom,cpr-irq-line = <0>; |
| qcom,cpr-step-quotient = <26>; |
| qcom,cpr-up-threshold = <0>; |
| qcom,cpr-down-threshold = <2>; |
| qcom,cpr-idle-clocks = <15>; |
| qcom,cpr-gcnt-time = <1>; |
| qcom,vdd-apc-step-up-limit = <1>; |
| qcom,vdd-apc-step-down-limit = <1>; |
| qcom,cpr-apc-volt-step = <12500>; |
| |
| qcom,cpr-fuse-row = <26 0>; |
| qcom,cpr-fuse-target-quot = <42 24 6>; |
| qcom,cpr-fuse-ro-sel = <61 61 54>; |
| qcom,cpr-fuse-bp-cpr-disable = <58>; |
| qcom,cpr-fuse-init-voltage = |
| <26 36 6 0>, |
| <26 18 6 0>, |
| <26 0 6 0>; |
| qcom,cpr-fuse-revision = <26 59 2 0>; |
| qcom,cpr-init-voltage-ref = <1050000 1225000 1350000>; |
| qcom,cpr-init-voltage-step = <10000>; |
| qcom,cpr-corner-map = <1 1 2 2 3 3 3 3 3>; |
| qcom,cpr-init-voltage-as-ceiling; |
| qcom,cpr-corner-frequency-map = |
| <1 200000000>, |
| <2 400000000>, |
| <3 533330000>, |
| <4 800000000>, |
| <5 998400000>, |
| <6 1094400000>, |
| <7 1190400000>, |
| <8 1248000000>, |
| <9 1267200000>; |
| qcom,speed-bin-fuse-sel = <1 34 3 0>; |
| qcom,cpr-speed-bin-max-corners = |
| <0 0 2 4 9>, |
| <2 0 2 4 6>; |
| qcom,cpr-quot-adjust-scaling-factor-max = <1400>; |
| qcom,cpr-enable; |
| }; |
| |
| qcom,gcc@1800000 { |
| vdd_dig-supply = <&pm8916_s1_corner>; |
| vdd_sr2_dig-supply = <&pm8916_s1_corner_ao>; |
| vdd_sr2_pll-supply = <&pm8916_l7_ao>; |
| }; |
| |
| qcom,clock-a7@0b011050 { |
| cpu-vdd-supply = <&apc_vreg_corner>; |
| qcom,speed0-bin-v0 = |
| < 0 0>, |
| < 200000000 1>, |
| < 400000000 2>, |
| < 533333000 3>, |
| < 800000000 4>, |
| < 998400000 5>, |
| < 1094400000 6>, |
| < 1190400000 7>, |
| < 1248000000 8>, |
| < 1267200000 9>; |
| |
| qcom,speed2-bin-v0 = |
| < 0 0>, |
| < 200000000 1>, |
| < 400000000 2>, |
| < 533333000 3>, |
| < 800000000 4>, |
| < 998400000 5>, |
| < 1094400000 6>; |
| }; |
| |
| qcom,supply-lm@1946000 { |
| status = "disabled"; |
| }; |
| |
| qcom,wcnss-wlan@a000000 { |
| qcom,pronto-vddmx-supply = <&pm8916_l3_corner_ao>; |
| qcom,pronto-vddcx-supply = <&pm8916_s1_corner>; |
| qcom,pronto-vddpx-supply = <&pm8916_l7>; |
| qcom,iris-vddxo-supply = <&pm8916_l7>; |
| qcom,iris-vddrfa-supply = <&pm8916_s3>; |
| qcom,iris-vddpa-supply = <&pm8916_l9>; |
| qcom,iris-vdddig-supply = <&pm8916_l5>; |
| qcom,wcnss-adc_tm = <&pm8916_adc_tm>; |
| }; |
| |
| usb_otg: usb@78d9000 { |
| hsusb_vdd_dig-supply = <&pm8916_l2>; |
| HSUSB_1p8-supply = <&pm8916_l7>; |
| HSUSB_3p3-supply = <&pm8916_l13>; |
| }; |
| |
| qcom,pronto@a21b000 { |
| vdd_pronto_pll-supply = <&pm8916_l7>; |
| }; |
| |
| qcom,mss@4080000 { |
| vdd_cx-supply = <&pm8916_s1_corner>; |
| vdd_mx-supply = <&pm8916_l3_corner_ao>; |
| vdd_pll-supply = <&pm8916_l7>; |
| }; |
| |
| tpiu@820000 { |
| vdd-supply = <&pm8916_l11>; |
| vdd-io-supply = <&pm8916_l12>; |
| }; |
| |
| qpdi@1941000 { |
| vdd-supply = <&pm8916_l11>; |
| vdd-io-supply = <&pm8916_l12>; |
| }; |
| |
| qcom,mdss_dsi@0 { |
| vdda-supply = <&pm8916_l2>; |
| vddio-supply = <&pm8916_l6>; |
| |
| qcom,mdss_dsi_ctrl0@1ac8000 { |
| vdd-supply = <&pm8916_l17>; |
| vddio-supply = <&pm8916_l6>; |
| }; |
| }; |
| |
| qcom,mdss_dsi_pll@1ac8300 { |
| vddio-supply = <&pm8916_l6>; |
| }; |
| }; |
| |
| |
| &pm8916_vadc { |
| chan@0 { |
| label = "usb_in"; |
| reg = <0>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <7>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@2 { |
| label = "ireg_fb"; |
| reg = <2>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <6>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@5 { |
| label = "vcoin"; |
| reg = <5>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@6 { |
| label = "vbat_sns"; |
| reg = <6>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@7 { |
| label = "vph_pwr"; |
| reg = <7>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b { |
| label = "chg_temp"; |
| reg = <0xb>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <3>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@30 { |
| label = "batt_therm"; |
| reg = <0x30>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <1>; |
| qcom,hw-settle-time = <0xb>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@31 { |
| label = "batt_id"; |
| reg = <0x31>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0xb>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@36 { |
| label = "pa_therm0"; |
| reg = <0x36>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@32 { |
| label = "xo_therm"; |
| reg = <0x32>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@3c { |
| label = "xo_therm_buf"; |
| reg = <0x3c>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| }; |
| |
| &pm8916_adc_tm { |
| /* Channel Node */ |
| chan@30 { |
| label = "batt_therm"; |
| reg = <0x30>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <1>; |
| qcom,hw-settle-time = <0xb>; |
| qcom,fast-avg-setup = <0x2>; |
| qcom,btm-channel-number = <0x48>; |
| }; |
| |
| chan@6 { |
| label = "vbat_sns"; |
| reg = <0x6>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0xb>; |
| qcom,fast-avg-setup = <0x2>; |
| qcom,btm-channel-number = <0x68>; |
| }; |
| }; |
| |
| #include "msm8909-pm8916-pm.dtsi" |
| |
| &soc { |
| thermal-zones { |
| xo-therm-buf-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm8916_vadc 0x3c>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| xo-therm-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm8916_vadc 0x32>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| pa-therm0-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm8916_vadc 0x36>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| mdm-lowf { |
| cooling-maps { |
| cx_vdd_cdev { |
| cooling-device = <&pm8916_cx_cdev 0 0>; |
| }; |
| }; |
| }; |
| camera-lowf { |
| cooling-maps { |
| cx_vdd_cdev { |
| cooling-device = <&pm8916_cx_cdev 0 0>; |
| }; |
| }; |
| }; |
| gpu-lowf { |
| cooling-maps { |
| cx_vdd_cdev { |
| cooling-device = <&pm8916_cx_cdev 0 0>; |
| }; |
| }; |
| }; |
| cpu0-2-lowf { |
| cooling-maps { |
| cx_vdd_cdev { |
| cooling-device = <&pm8916_cx_cdev 0 0>; |
| }; |
| }; |
| }; |
| cpu1-3-lowf { |
| cooling-maps { |
| cx_vdd_cdev { |
| cooling-device = <&pm8916_cx_cdev 0 0>; |
| }; |
| }; |
| }; |
| }; |
| }; |