| /* Copyright (c) 2014, 2020, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm8909.dtsi" |
| #include "msm8909-pm8909.dtsi" |
| #include "msm8909-pinctrl.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. MSM8909 QRD"; |
| compatible = "qcom,msm8909-qrd", "qcom,msm8909", "qcom,qrd"; |
| }; |
| |
| &blsp1_uart1 { |
| status = "ok"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart_console_sleep>; |
| }; |
| |
| &qcom_rng { |
| status = "okay"; |
| }; |
| |
| &qcom_crypto { |
| status = "okay"; |
| }; |
| |
| &qcom_cedev { |
| status = "okay"; |
| }; |
| |
| &qcom_seecom { |
| status = "okay"; |
| }; |
| |
| &qcom_tzlog { |
| status = "okay"; |
| }; |
| |
| &soc { |
| gpio_keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend"; |
| pinctrl-0 = <&gpio_key_active>; |
| pinctrl-1 = <&gpio_key_suspend>; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&msm_gpio 90 0x1>; |
| linux,input-type = <1>; |
| linux,code = <115>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| }; |
| }; |
| }; |
| |
| &sdhc_1 { |
| vdd-supply = <&pm8909_l8>; |
| qcom,vdd-voltage-level = <2900000 2900000>; |
| qcom,vdd-current-level = <200 400000>; |
| |
| vdd-io-supply = <&pm8909_l5>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <200 60000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; |
| |
| qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; |
| qcom,nonremovable; |
| |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| #address-cells = <0>; |
| interrupt-parent = <&sdhc_2>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 125 0 |
| 1 &intc 0 221 0 |
| 2 &msm_gpio 38 0>; |
| interrupt-names = "hc_irq", "pwr_irq", "status_irq"; |
| cd-gpios = <&msm_gpio 38 0x1>; |
| |
| vdd-supply = <&pm8909_l11>; |
| qcom,vdd-voltage-level = <1800000 2950000>; |
| qcom,vdd-current-level = <15000 400000>; |
| |
| vdd-io-supply = <&pm8909_l12>; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <200 50000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
| |
| status = "ok"; |
| }; |
| |
| &spmi_bus { |
| qcom,pm8909@1 { |
| qcom,vibrator@c000 { |
| status = "okay"; |
| qcom,vib-timeout-ms = <15000>; |
| qcom,vib-vtg-level-mV = <3100>; |
| }; |
| }; |
| }; |
| |
| /* CoreSight */ |
| &tpiu { |
| pinctrl-names = "sdcard", "trace", "swduart", |
| "swdtrc", "jtag", "spmi"; |
| /* NIDnT */ |
| pinctrl-0 = <&qdsd_clk_sdcard &qdsd_cmd_sdcard |
| &qdsd_data0_sdcard &qdsd_data1_sdcard |
| &qdsd_data2_sdcard &qdsd_data3_sdcard>; |
| pinctrl-1 = <&qdsd_clk_trace &qdsd_cmd_trace |
| &qdsd_data0_trace &qdsd_data1_trace |
| &qdsd_data2_trace &qdsd_data3_trace>; |
| pinctrl-2 = <&qdsd_cmd_swduart &qdsd_data0_swduart |
| &qdsd_data1_swduart &qdsd_data2_swduart |
| &qdsd_data3_swduart>; |
| pinctrl-3 = <&qdsd_clk_swdtrc &qdsd_cmd_swdtrc |
| &qdsd_data0_swdtrc &qdsd_data1_swdtrc |
| &qdsd_data2_swdtrc &qdsd_data3_swdtrc>; |
| pinctrl-4 = <&qdsd_cmd_jtag &qdsd_data0_jtag |
| &qdsd_data1_jtag &qdsd_data2_jtag |
| &qdsd_data3_jtag>; |
| pinctrl-5 = <&qdsd_clk_spmi &qdsd_cmd_spmi |
| &qdsd_data0_spmi &qdsd_data3_spmi>; |
| }; |
| |
| &android_usb { |
| qcom,android-usb-cdrom; |
| }; |