| /* Copyright (c) 2013-2015, 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* CPR controlled regulator */ |
| &soc { |
| mem_acc_vreg_corner: regulator@1946000 { |
| compatible = "qcom,mem-acc-regulator"; |
| reg = <0x1946000 0x4>, <0x58000 0x1000>; |
| reg-names = "acc-sel-l1", "efuse_addr"; |
| regulator-name = "mem_acc_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <3>; |
| |
| qcom,acc-sel-l1-bit-pos = <0>; |
| qcom,acc-sel-l1-bit-size = <9>; |
| qcom,corner-acc-map = <0x0 0x100 0x101>; |
| |
| qcom,override-acc-fuse-sel = <0 52 1 1 0>; |
| qcom,override-corner-acc-map = <0x0 0x100 0x100>; |
| }; |
| |
| apc_vreg_corner: regulator@b018000 { |
| compatible = "qcom,cpr-regulator"; |
| reg = <0xb018000 0x1000>, <0xb011064 0x4>, <0x58000 0x1000>; |
| reg-names = "rbcpr", "rbcpr_clk", "efuse_addr"; |
| interrupts = <0 15 0>; |
| regulator-name = "apc_corner"; |
| qcom,cpr-fuse-corners = <3>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <9>; |
| |
| qcom,cpr-voltage-ceiling = <1050000 1150000 1350000>; |
| qcom,cpr-voltage-floor = <1050000 1050000 1162500>; |
| vdd-apc-supply = <&pm8916_s2>; |
| |
| qcom,vdd-mx-corner-map = <4 5 7>; |
| qcom,vdd-mx-vmin-method = <4>; |
| vdd-mx-supply = <&pm8916_l3_corner_ao>; |
| qcom,vdd-mx-vmax = <7>; |
| |
| mem-acc-supply = <&mem_acc_vreg_corner>; |
| |
| qcom,cpr-ref-clk = <19200>; |
| qcom,cpr-timer-delay = <5000>; |
| qcom,cpr-timer-cons-up = <0>; |
| qcom,cpr-timer-cons-down = <2>; |
| qcom,cpr-irq-line = <0>; |
| qcom,cpr-step-quotient = <26>; |
| qcom,cpr-up-threshold = <0>; |
| qcom,cpr-down-threshold = <2>; |
| qcom,cpr-idle-clocks = <15>; |
| qcom,cpr-gcnt-time = <1>; |
| qcom,vdd-apc-step-up-limit = <1>; |
| qcom,vdd-apc-step-down-limit = <1>; |
| qcom,cpr-apc-volt-step = <12500>; |
| |
| qcom,cpr-fuse-row = <27 0>; |
| qcom,cpr-fuse-target-quot = <42 24 6>; |
| qcom,cpr-fuse-ro-sel = <54 54 54>; |
| qcom,cpr-fuse-bp-cpr-disable = <57>; |
| qcom,cpr-fuse-init-voltage = |
| <27 36 6 0>, |
| <27 18 6 0>, |
| <27 0 6 0>; |
| qcom,cpr-init-voltage-ref = <1050000 1150000 1350000>; |
| qcom,cpr-init-voltage-step = <10000>; |
| qcom,cpr-corner-map = <1 1 2 2 3 3 3 3 3>; |
| qcom,cpr-corner-frequency-map = |
| <1 200000000>, |
| <2 400000000>, |
| <3 533330000>, |
| <4 800000000>, |
| <5 998400000>, |
| <6 1094400000>, |
| <7 1152000000>, |
| <8 1209600000>, |
| <9 1363200000>; |
| qcom,speed-bin-fuse-sel = <1 34 3 0>; |
| qcom,pvs-version-fuse-sel = <0 55 2 0>; |
| qcom,cpr-speed-bin-max-corners = |
| <0 0 2 4 8>, |
| <0 1 2 4 7>, |
| <2 0 2 4 9>, |
| <3 0 2 4 5>, |
| <3 1 2 4 5>; |
| qcom,cpr-quot-adjust-scaling-factor-max = <650>; |
| qcom,cpr-enable; |
| }; |
| }; |
| |
| /* SPM controlled regulators */ |
| &spmi_bus { |
| pm8916@1 { |
| pm8916_s2: spm-regulator@1700 { |
| compatible = "qcom,spm-regulator"; |
| regulator-name = "8916_s2"; |
| reg = <0x1700 0x100>; |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1350000>; |
| }; |
| }; |
| }; |
| |
| /* RPM controlled regulators */ |
| &rpm_bus { |
| |
| /* PM8916 S1 VDD_CX supply */ |
| rpm-regulator-smpa1 { |
| status = "okay"; |
| pm8916_s1_corner: regulator-s1-corner { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "8916_s1_corner"; |
| qcom,set = <3>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-corner; |
| }; |
| pm8916_s1_corner_ao: regulator-s1-corner-ao { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "8916_s1_corner_ao"; |
| qcom,set = <1>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-corner; |
| }; |
| pm8916_s1_floor_corner: regulator-s1-floor-corner { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "8916_s1_floor_corner"; |
| qcom,set = <3>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-floor-corner; |
| qcom,always-send-voltage; |
| }; |
| pm8916_cx_cdev: regulator-cx-cdev { |
| compatible = "qcom,regulator-cooling-device"; |
| regulator-cdev-supply = <&pm8916_s1_floor_corner>; |
| regulator-levels = <5 1>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| rpm-regulator-smpa3 { |
| status = "okay"; |
| pm8916_s3: regulator-s3 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-smpa4 { |
| status = "okay"; |
| pm8916_s4: regulator-s4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2100000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa1 { |
| status = "okay"; |
| pm8916_l1: regulator-l1 { |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| qcom,init-voltage = <1225000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa2 { |
| status = "okay"; |
| pm8916_l2: regulator-l2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| |
| /* PM8916 L3 VDD_MX supply */ |
| rpm-regulator-ldoa3 { |
| status = "okay"; |
| pm8916_l3: regulator-l3 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1287500>; |
| status = "okay"; |
| }; |
| |
| pm8916_l3_corner_ao: regulator-l3-corner-ao { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "8916_l3_corner_ao"; |
| qcom,set = <1>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-corner; |
| }; |
| |
| pm8916_l3_corner_so: regulator-l3-corner-so { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "8916_l3_corner_so"; |
| qcom,set = <2>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-corner; |
| qcom,init-voltage-corner = <1>; |
| }; |
| }; |
| |
| rpm-regulator-ldoa4 { |
| status = "okay"; |
| pm8916_l4: regulator-l4 { |
| regulator-min-microvolt = <2050000>; |
| regulator-max-microvolt = <2050000>; |
| qcom,init-voltage = <2050000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa5 { |
| status = "okay"; |
| pm8916_l5: regulator-l5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa6 { |
| status = "okay"; |
| pm8916_l6: regulator-l6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa7 { |
| status = "okay"; |
| pm8916_l7: regulator-l7 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| |
| pm8916_l7_ao: regulator-l7-ao { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "8916_l7_ao"; |
| qcom,set = <1>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| }; |
| |
| pm8916_l7_so: regulator-l7-so { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "8916_l7_so"; |
| qcom,set = <2>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpm-regulator-ldoa8 { |
| status = "okay"; |
| pm8916_l8: regulator-l8 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2900000>; |
| qcom,init-voltage = <2850000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa9 { |
| status = "okay"; |
| pm8916_l9: regulator-l9 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <3300000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa10 { |
| status = "okay"; |
| pm8916_l10: regulator-l10 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2800000>; |
| qcom,init-voltage = <2700000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa11 { |
| status = "okay"; |
| pm8916_l11: regulator-l11 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa12 { |
| status = "okay"; |
| pm8916_l12: regulator-l12 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa13 { |
| status = "okay"; |
| pm8916_l13: regulator-l13 { |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| qcom,init-voltage = <3075000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa14 { |
| status = "okay"; |
| pm8916_l14: regulator-l14 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa15 { |
| status = "okay"; |
| pm8916_l15: regulator-l15 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa16 { |
| status = "okay"; |
| pm8916_l16: regulator-l16 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa17 { |
| status = "okay"; |
| pm8916_l17: regulator-l17 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| qcom,init-voltage = <2850000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa18 { |
| status = "okay"; |
| pm8916_l18: regulator-l18 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| qcom,init-voltage = <2700000>; |
| status = "okay"; |
| }; |
| }; |
| }; |