blob: 5dc808fb50aa9fa4a7aef923cd274dc15763535e [file] [log] [blame]
/* Copyright (c) 2018,2020, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&soc {
pil_gpu: qcom,kgsl-hyp {
compatible = "qcom,pil-tz-generic";
qcom,pas-id = <13>;
qcom,firmware-name = "a506_zap";
memory-region = <&gpu_mem>;
qcom,mas-crypto = <&mas_crypto>;
clocks = <&clock_gcc clk_gcc_crypto_clk>,
<&clock_gcc clk_gcc_crypto_ahb_clk>,
<&clock_gcc clk_gcc_crypto_axi_clk>,
<&clock_gcc clk_crypto_clk_src>;
clock-names = "scm_core_clk", "scm_iface_clk",
"scm_bus_clk", "scm_core_clk_src";
qcom,proxy-clock-names = "scm_core_clk", "scm_iface_clk",
"scm_bus_clk", "scm_core_clk_src";
qcom,scm_core_clk_src-freq = <80000000>;
};
msm_bus: qcom,kgsl-busmon {
label = "kgsl-busmon";
compatible = "qcom,kgsl-busmon";
};
gpubw: qcom,gpubw {
compatible = "qcom,devbw";
governor = "bw_vbif";
qcom,src-dst-ports = <26 512>;
/*
* active-only flag is used while registering the bus
* governor.It helps release the bus vote when the CPU
* subsystem is inactiv3
*/
qcom,active-only;
qcom,bw-tbl =
< 0 >, /* off */
< 1611 >, /* 1. DDR:211.20 MHz BIMC: 105.60 MHz */
< 2124 >, /* 2. DDR:278.40 MHz BIMC: 139.20 MHz */
< 2929 >, /* 3. DDR:384.00 MHz BIMC: 192.00 MHz */
< 3222 >, /* 4. DDR:422.40 MHz BIMC: 211.20 MHz */
< 4248 >, /* 5. DDR:556.80 MHz BIMC: 278.40 MHz */
< 5126 >, /* 6. DDR:672.00 MHz BIMC: 336.00 MHz */
< 5859 >, /* 7. DDR:768.00 MHz BIMC: 384.00 MHz */
< 6152 >, /* 8. DDR:806.40 MHz BIMC: 403.20 MHz */
< 6445 >, /* 9. DDR:844.80 MHz BIMC: 422.40 MHz */
< 7104 >; /*10. DDR:931.20 MHz BIMC: 465.60 MHz */
};
msm_gpu: qcom,kgsl-3d0@1c00000 {
label = "kgsl-3d0";
compatible = "qcom,kgsl-3d0", "qcom,kgsl-3d";
status = "ok";
reg = <0x1c00000 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <0 33 0>;
interrupt-names = "kgsl_3d0_irq";
qcom,id = <0>;
qcom,chipid = <0x05000600>;
qcom,initial-pwrlevel = <4>;
qcom,idle-timeout = <80>; //msecs
qcom,deep-nap-timeout = <100>; //msecs
qcom,strtstp-sleepwake;
qcom,highest-bank-bit = <14>;
qcom,snapshot-size = <0x200000>; //bytes
clocks = <&clock_gcc_gfx clk_gcc_oxili_gfx3d_clk>,
<&clock_gcc_gfx clk_gcc_oxili_ahb_clk>,
<&clock_gcc_gfx clk_gcc_bimc_gfx_clk>,
<&clock_gcc_gfx clk_gcc_bimc_gpu_clk>,
<&clock_gcc_gfx clk_gcc_oxili_timer_clk>,
<&clock_gcc_gfx clk_gcc_oxili_aon_clk>;
clock-names = "core_clk", "iface_clk",
"mem_iface_clk", "alt_mem_iface_clk",
"rbbmtimer_clk", "alwayson_clk";
/* Bus Scale Settings */
qcom,gpubw-dev = <&gpubw>;
qcom,bus-control;
qcom,bus-width = <16>;
qcom,msm-bus,name = "grp3d";
qcom,msm-bus,num-cases = <11>;
qcom,msm-bus,num-paths = <1>;
qcom,msm-bus,vectors-KBps =
<26 512 0 0>, /* off */
<26 512 0 1689600>, /* 1. 211.20 MHz */
<26 512 0 2227200>, /* 2. 278.40 MHz */
<26 512 0 3072000>, /* 3. 384.00 MHz */
<26 512 0 3379200>, /* 4. 422.40 MHz */
<26 512 0 4454400>, /* 5. 556.80 MHz */
<26 512 0 5376000>, /* 6. 672.00 MHz */
<26 512 0 6144000>, /* 7. 768.00 MHz */
<26 512 0 6451200>, /* 8. 806.40 MHz */
<26 512 0 6758400>, /* 9. 844.80 MHz */
<26 512 0 7449600>; /*10. 931.20 MHz */
/* GDSC regulator names */
regulator-names = "vddcx", "vdd";
/* GDSC oxili regulators */
vddcx-supply = <&gdsc_oxili_cx>;
vdd-supply = <&gdsc_oxili_gx>;
/* CPU latency parameter */
qcom,pm-qos-active-latency = <213>;
qcom,pm-qos-wakeup-latency = <213>;
/* Quirks */
qcom,gpu-quirk-two-pass-use-wfi;
qcom,gpu-quirk-dp2clockgating-disable;
qcom,gpu-quirk-lmloadkill-disable;
/* Enable context aware freq. scaling */
qcom,enable-ca-jump;
/* Context aware jump busy penalty in us */
qcom,ca-busy-penalty = <12000>;
/* Context aware jump target power level */
qcom,ca-target-pwrlevel = <3>;
/* Enable gpu cooling device */
#cooling-cells = <2>;
/* GPU Mempools */
qcom,gpu-mempools {
#address-cells= <1>;
#size-cells = <0>;
compatible = "qcom,gpu-mempools";
qcom,mempool-max-pages = <32768>;
/* 4K Page Pool configuration */
qcom,gpu-mempool@0 {
reg = <0>;
qcom,mempool-page-size = <4096>;
};
/* 64K Page Pool configuration */
qcom,gpu-mempool@1 {
reg = <1>;
qcom,mempool-page-size = <65536>;
};
};
qcom,gpu-coresights {
#address-cells = <1>;
#size-cells = <0>;
compatible = "qcom,gpu-coresight";
/* Trace bus */
qcom,gpu-coresight@0 {
reg = <0>;
coresight-name = "coresight-gfx";
coresight-atid = <67>;
port {
gfx_out_funnel_mm: endpoint {
remote-endpoint =
<&funnel_mm_in_gfx>;
};
};
};
};
/* Power levels */
qcom,gpu-pwrlevels {
#address-cells = <1>;
#size-cells = <0>;
compatible = "qcom,gpu-pwrlevels";
/* TURBO */
qcom,gpu-pwrlevel@0 {
reg = <0>;
qcom,gpu-freq = <650000000>;
qcom,bus-freq = <10>;
qcom,bus-min = <10>;
qcom,bus-max = <10>;
};
/* NOM+ */
qcom,gpu-pwrlevel@1 {
reg = <1>;
qcom,gpu-freq = <560000000>;
qcom,bus-freq = <10>;
qcom,bus-min = <8>;
qcom,bus-max = <10>;
};
/* NOM */
qcom,gpu-pwrlevel@2 {
reg = <2>;
qcom,gpu-freq = <510000000>;
qcom,bus-freq = <9>;
qcom,bus-min = <6>;
qcom,bus-max = <10>;
};
/* SVS+ */
qcom,gpu-pwrlevel@3 {
reg = <3>;
qcom,gpu-freq = <400000000>;
qcom,bus-freq = <7>;
qcom,bus-min = <5>;
qcom,bus-max = <8>;
};
/* SVS */
qcom,gpu-pwrlevel@4 {
reg = <4>;
qcom,gpu-freq = <320000000>;
qcom,bus-freq = <4>;
qcom,bus-min = <2>;
qcom,bus-max = <6>;
};
/* Low SVS */
qcom,gpu-pwrlevel@5 {
reg = <5>;
qcom,gpu-freq = <216000000>;
qcom,bus-freq = <1>;
qcom,bus-min = <1>;
qcom,bus-max = <4>;
};
/* Min SVS */
qcom,gpu-pwrlevel@6 {
reg = <6>;
qcom,gpu-freq = <133300000>;
qcom,bus-freq = <1>;
qcom,bus-min = <1>;
qcom,bus-max = <4>;
};
/* XO */
qcom,gpu-pwrlevel@7 {
reg = <7>;
qcom,gpu-freq = <19200000>;
qcom,bus-freq = <0>;
qcom,bus-min = <0>;
qcom,bus-max = <0>;
};
};
};
kgsl_msm_iommu: qcom,kgsl-iommu@1c40000 {
compatible = "qcom,kgsl-smmu-v2";
reg = <0x1c40000 0x10000>;
qcom,protect = <0x40000 0x10000>;
qcom,micro-mmu-control = <0x6000>;
clocks = <&clock_gcc_gfx clk_gcc_oxili_ahb_clk>,
<&clock_gcc_gfx clk_gcc_bimc_gfx_clk>;
clock-names = "gpu_ahb_clk", "gcc_bimc_gfx_clk";
qcom,secure_align_mask = <0xfff>;
qcom,retention;
gfx3d_user: gfx3d_user {
compatible = "qcom,smmu-kgsl-cb";
label = "gfx3d_user";
iommus = <&kgsl_smmu 0>;
qcom,gpu-offset = <0x48000>;
};
gfx3d_secure: gfx3d_secure {
compatible = "qcom,smmu-kgsl-cb";
iommus = <&kgsl_smmu 2>;
memory-region = <&secure_mem>;
};
};
};