| /* Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &pm660_0 { |
| pm660_charger: qcom,qpnp-smb2 { |
| compatible = "qcom,qpnp-smb2"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #cooling-cells = <2>; |
| |
| qcom,pmic-revid = <&pm660_revid>; |
| |
| qcom,qcs605-ipc-wa; |
| |
| io-channels = <&pm660_rradc 8>, |
| <&pm660_rradc 10>, |
| <&pm660_rradc 3>, |
| <&pm660_rradc 4>; |
| io-channel-names = "charger_temp", |
| "charger_temp_max", |
| "usbin_i", |
| "usbin_v"; |
| |
| qcom,wipower-max-uw = <5000000>; |
| |
| dpdm-supply = <&qusb_phy0>; |
| |
| qcom,thermal-mitigation |
| = <3000000 2500000 2000000 1500000 |
| 1000000 500000>; |
| qcom,auto-recharge-soc; |
| |
| qcom,chgr@1000 { |
| reg = <0x1000 0x100>; |
| interrupts = |
| <0x0 0x10 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x10 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x10 0x2 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x10 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x10 0x4 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "chg-error", |
| "chg-state-change", |
| "step-chg-state-change", |
| "step-chg-soc-update-fail", |
| "step-chg-soc-update-request"; |
| }; |
| |
| qcom,otg@1100 { |
| reg = <0x1100 0x100>; |
| interrupts = <0x0 0x11 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x11 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x11 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x11 0x3 IRQ_TYPE_EDGE_BOTH>; |
| |
| interrupt-names = "otg-fail", |
| "otg-overcurrent", |
| "otg-oc-dis-sw-sts", |
| "testmode-change-detect"; |
| }; |
| |
| qcom,bat-if@1200 { |
| reg = <0x1200 0x100>; |
| interrupts = |
| <0x0 0x12 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x12 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x12 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x12 0x5 IRQ_TYPE_EDGE_BOTH>; |
| |
| interrupt-names = "bat-temp", |
| "bat-ocp", |
| "bat-ov", |
| "bat-low", |
| "bat-therm-or-id-missing", |
| "bat-terminal-missing"; |
| }; |
| |
| qcom,usb-chgpth@1300 { |
| reg = <0x1300 0x100>; |
| interrupts = |
| <0x0 0x13 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x13 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x13 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x13 0x5 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x13 0x7 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "usbin-collapse", |
| "usbin-lt-3p6v", |
| "usbin-uv", |
| "usbin-ov", |
| "usbin-plugin", |
| "usbin-src-change", |
| "usbin-icl-change", |
| "type-c-change"; |
| }; |
| |
| qcom,dc-chgpth@1400 { |
| reg = <0x1400 0x100>; |
| interrupts = |
| <0x0 0x14 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x14 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x14 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x14 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x14 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x14 0x5 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x14 0x6 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "dcin-collapse", |
| "dcin-lt-3p6v", |
| "dcin-uv", |
| "dcin-ov", |
| "dcin-plugin", |
| "div2-en-dg", |
| "dcin-icl-change"; |
| }; |
| |
| qcom,chgr-misc@1600 { |
| reg = <0x1600 0x100>; |
| interrupts = |
| <0x0 0x16 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x16 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x16 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x16 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x16 0x5 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x16 0x6 IRQ_TYPE_EDGE_FALLING>, |
| <0x0 0x16 0x7 IRQ_TYPE_EDGE_BOTH>; |
| |
| interrupt-names = "wdog-snarl", |
| "wdog-bark", |
| "aicl-fail", |
| "aicl-done", |
| "high-duty-cycle", |
| "input-current-limiting", |
| "temperature-change", |
| "switcher-power-ok"; |
| }; |
| smb2_vbus: qcom,smb2-vbus { |
| regulator-name = "smb2-vbus"; |
| }; |
| |
| smb2_vconn: qcom,smb2-vconn { |
| regulator-name = "smb2-vconn"; |
| }; |
| }; |
| |
| pm660_rradc: rradc@4500 { |
| compatible = "qcom,rradc"; |
| reg = <0x4500 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #io-channel-cells = <1>; |
| qcom,pmic-revid = <&pm660_revid>; |
| }; |
| |
| pm660_fg: qpnp,fg { |
| compatible = "qcom,fg-gen3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,pmic-revid = <&pm660_revid>; |
| io-channels = <&pm660_rradc 0>, |
| <&pm660_rradc 7>; |
| io-channel-names = "rradc_batt_id", |
| "rradc_die_temp"; |
| qcom,rradc-base = <0x4500>; |
| qcom,fg-esr-timer-awake = <64 96>; |
| qcom,fg-esr-timer-asleep = <224 256>; |
| qcom,fg-esr-timer-charging = <0 96>; |
| qcom,cycle-counter-en; |
| qcom,hold-soc-while-full; |
| qcom,fg-auto-recharge-soc; |
| qcom,fg-recharge-soc-thr = <98>; |
| status = "okay"; |
| |
| qcom,fg-batt-soc@4000 { |
| status = "okay"; |
| reg = <0x4000 0x100>; |
| interrupts = <0x0 0x40 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x40 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x40 0x2 |
| IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x40 0x3 |
| IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x40 0x4 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x40 0x5 |
| IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x40 0x6 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x40 0x7 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "soc-update", |
| "soc-ready", |
| "bsoc-delta", |
| "msoc-delta", |
| "msoc-low", |
| "msoc-empty", |
| "msoc-high", |
| "msoc-full"; |
| }; |
| |
| qcom,fg-batt-info@4100 { |
| status = "okay"; |
| reg = <0x4100 0x100>; |
| interrupts = <0x0 0x41 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x41 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x41 0x2 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x41 0x3 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x41 0x6 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "vbatt-pred-delta", |
| "vbatt-low", |
| "esr-delta", |
| "batt-missing", |
| "batt-temp-delta"; |
| }; |
| |
| qcom,fg-memif@4400 { |
| status = "okay"; |
| reg = <0x4400 0x100>; |
| interrupts = <0x0 0x44 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x44 0x1 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x44 0x2 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "ima-rdy", |
| "mem-xcp", |
| "dma-grant"; |
| }; |
| }; |
| }; |
| |
| &pm660_1 { |
| pm660_haptics: qcom,haptics@c000 { |
| compatible = "qcom,qpnp-haptics"; |
| reg = <0xc000 0x100>; |
| interrupts = <0x1 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x1 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "hap-sc-irq", "hap-play-irq"; |
| qcom,pmic-revid = <&pm660_revid>; |
| qcom,pmic-misc = <&pm660_misc>; |
| qcom,misc-clk-trim-error-reg = <0xf3>; |
| qcom,actuator-type = <0>; |
| qcom,play-mode = "direct"; |
| qcom,vmax-mv = <3200>; |
| qcom,ilim-ma = <800>; |
| qcom,sc-dbc-cycles = <8>; |
| qcom,wave-play-rate-us = <6667>; |
| qcom,en-brake; |
| qcom,lra-high-z = "opt0"; |
| qcom,lra-auto-res-mode = "qwd"; |
| qcom,lra-res-cal-period = <4>; |
| }; |
| }; |
| |
| &pm660_pdphy { |
| vdd-pdphy-supply = <&pm660_l17>; |
| vbus-supply = <&smb2_vbus>; |
| vconn-supply = <&smb2_vconn>; |
| }; |
| |
| &usb0 { |
| extcon = <&pm660_pdphy>, <&pm660_pdphy>, <&eud>, |
| <&pm660_charger>, <&pm660_charger>; |
| vbus_dwc3-supply = <&smb2_vbus>; |
| }; |