| /* |
| * Copyright (c) 2017-2018 The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /dts-v1/; |
| |
| #include "msm8909-mtp.dtsi" |
| #include "msm8909w.dtsi" |
| #include "msm8909w-gpu.dtsi" |
| #include "8909w-pm660.dtsi" |
| #include "apq8009w-bg-memory.dtsi" |
| #include "msm8909-audio-bg_codec.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. APQ8009W-PM660 BG Alpha SDW3100"; |
| compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp"; |
| qcom,msm-id = <265 0>, |
| <301 0>; |
| qcom,board-id = <8 0x113>; |
| qcom,pmic-id = <0x0001001b 0x0 0x0 0x0>, |
| <0x0001011b 0x0 0x0 0x0>; |
| }; |
| |
| &soc { |
| i2c@78b9000 { /* BLSP1 QUP5 */ |
| focaltech@38 { |
| compatible = "focaltech,fts"; |
| reg = <0x38>; |
| interrupt-parent = <&msm_gpio>; |
| interrupts = <98 0x2008>; |
| vdd-supply = <&pm660_l18>; |
| vcc-i2c-supply = <&pm660_l13>; |
| focaltech,irq-gpio = <&msm_gpio 98 0x2008>; |
| focaltech,reset-gpio = <&msm_gpio 16 0x00>;/**/ |
| focaltech,max-touch-number = <5>; |
| focaltech,display-coords = <0 0 390 390>;/**/ |
| focaltech,wakeup-gestures-en; |
| }; |
| |
| /delete-node/ it7260@46; |
| /delete-node/ synaptics@20; |
| }; |
| |
| qcom,blackghost { |
| compatible = "qcom,pil-blackghost"; |
| |
| qcom,pil-force-shutdown; |
| qcom,firmware-name = "bg-wear"; |
| /* GPIO inputs from blackghost */ |
| qcom,bg2ap-status-gpio = <&msm_gpio 97 0>; |
| qcom,bg2ap-errfatal-gpio = <&msm_gpio 95 0>; |
| /* GPIO output to blackghost */ |
| qcom,ap2bg-status-gpio = <&msm_gpio 17 0>; |
| qcom,ap2bg-errfatal-gpio = <&msm_gpio 23 0>; |
| }; |
| |
| qcom,msm-ssc-sensors { |
| compatible = "qcom,msm-ssc-sensors"; |
| }; |
| |
| qcom,glink-bgcom-xprt-bg { |
| compatible = "qcom,glink-bgcom-xprt"; |
| label = "bg"; |
| qcom,qos-config = <&glink_qos_bg>; |
| qcom,ramp-time = <0x10>, |
| <0x20>, |
| <0x30>, |
| <0x40>; |
| }; |
| |
| glink_qos_bg: qcom,glink-qos-config-bg { |
| compatible = "qcom,glink-qos-config"; |
| qcom,flow-info = <0x80 0x0>, |
| <0x70 0x1>, |
| <0x60 0x2>, |
| <0x50 0x3>; |
| qcom,mtu-size = <0x800>; |
| qcom,tput-stats-cycle = <0xa>; |
| }; |
| |
| qcom,glink_pkt { |
| compatible = "qcom,glinkpkt"; |
| |
| qcom,glinkpkt-bg-daemon { |
| qcom,glinkpkt-transport = "bgcom"; |
| qcom,glinkpkt-edge = "bg"; |
| qcom,glinkpkt-ch-name = "bg-daemon"; |
| qcom,glinkpkt-dev-name = "glink_pkt_bg_daemon"; |
| }; |
| |
| qcom,glinkpkt-bg-display-ctrl { |
| qcom,glinkpkt-transport = "bgcom"; |
| qcom,glinkpkt-edge = "bg"; |
| qcom,glinkpkt-ch-name = "display-ctrl"; |
| qcom,glinkpkt-dev-name = "glink_pkt_bg_display_ctrl"; |
| }; |
| |
| qcom,glinkpkt-bg-display-data { |
| qcom,glinkpkt-transport = "bgcom"; |
| qcom,glinkpkt-edge = "bg"; |
| qcom,glinkpkt-ch-name = "display-data"; |
| qcom,glinkpkt-dev-name = "glink_pkt_bg_display_data"; |
| }; |
| |
| qcom,glinkpkt-bg-rsb-ctrl { |
| qcom,glinkpkt-transport = "bgcom"; |
| qcom,glinkpkt-edge = "bg"; |
| qcom,glinkpkt-ch-name = "RSB_CTRL"; |
| qcom,glinkpkt-dev-name = "glink_pkt_bg_rsb_ctrl"; |
| }; |
| |
| qcom,glinkpkt-bg-sso-ctrl { |
| qcom,glinkpkt-transport = "bgcom"; |
| qcom,glinkpkt-edge = "bg"; |
| qcom,glinkpkt-ch-name = "sso-ctrl"; |
| qcom,glinkpkt-dev-name = "glink_pkt_bg_sso_ctrl"; |
| }; |
| }; |
| |
| spi@78B8000 { /* BLSP1 QUP4 */ |
| status = "ok"; |
| qcom,bg-spi { |
| compatible = "qcom,bg-spi"; |
| reg = <0>; |
| spi-max-frequency = <16000000>; |
| interrupt-parent = <&msm_gpio>; |
| qcom,irq-gpio = <&msm_gpio 110 1>; |
| }; |
| }; |
| |
| qcom,bg-rsb { |
| compatible = "qcom,bg-rsb"; |
| vdd-ldo1-supply = <&pm660_l11>; |
| vdd-ldo2-supply = <&pm660_l15>; |
| }; |
| |
| qcom,bg-daemon { |
| compatible = "qcom,bg-daemon"; |
| qcom,bg-reset-gpio = <&pm660_gpios 5 0>; |
| ssr-reg1-supply = <&pm660_l3>; |
| ssr-reg2-supply = <&pm660_l9>; |
| }; |
| }; |
| |
| &i2c_1 { |
| status = "okay"; |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&msm_gpio 50 0x00>; |
| qcom,nq-ven = <&msm_gpio 36 0x00>; |
| qcom,nq-firm = <&msm_gpio 38 0x00>; |
| qcom,nq-esepwr = <&msm_gpio 49 0x00>; |
| qcom,nq-clkreq = <&pm660_gpios 4 0x00>; |
| qcom,clk-src = "BBCLK3"; |
| interrupt-parent = <&msm_gpio>; |
| interrupts = <50 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active","nfc_suspend"; |
| pinctrl-0 = <&nfcw_int_active |
| &nfcw_disable_active |
| &nfc_clk_default>; |
| pinctrl-1 = <&nfcw_int_suspend &nfcw_disable_suspend>; |
| clocks = <&clock_rpm clk_bb_clk3_pin>; |
| clock-names = "ref_clk"; |
| }; |
| }; |
| |
| &spi_0 { |
| status = "disabled"; |
| }; |
| |
| &i2c_3 { |
| status = "disabled"; |
| }; |
| |
| &i2c_4 { |
| status = "disabled"; |
| }; |
| |
| &i2c_2 { |
| status = "disabled"; |
| }; |
| |
| &sdc1_clk_off { |
| config { |
| pins = "sdc1_clk"; |
| bias-disable; /* NO pull */ |
| drive-strength = <2>; /* 2 MA */ |
| output-low; |
| }; |
| }; |
| |
| &sdc1_cmd_off { |
| config { |
| pins = "sdc1_cmd"; |
| bias-disable; /* NO pull */ |
| drive-strength = <2>; /* 2 MA */ |
| output-low; |
| }; |
| }; |
| |
| &sdc1_data_off { |
| config { |
| pins = "sdc1_data"; |
| bias-disable; /* NO pull */ |
| drive-strength = <2>; /* 2 MA */ |
| output-low; |
| }; |
| }; |
| |
| &sdhc_2 { |
| status = "disabled"; |
| }; |
| |
| &audio_codec_mtp { |
| status = "disabled"; |
| }; |
| |
| &audio_codec_bg { |
| status = "ok"; |
| }; |
| |
| &bg_cdc { |
| status = "ok"; |
| vdd-spkr-supply = <&pm660_l11>; |
| }; |
| |
| &blsp1_uart1 { |
| status = "ok"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart_console_sleep>; |
| }; |
| |
| /* Pinctrl dt nodes for interrupt and reset gpio for Synaptics controller */ |
| &ts_int_active { |
| mux { |
| pins = "gpio98"; |
| }; |
| |
| config { |
| pins = "gpio98"; |
| }; |
| }; |
| |
| &ts_int_suspend { |
| mux { |
| pins = "gpio98"; |
| }; |
| |
| config { |
| pins = "gpio98"; |
| }; |
| }; |
| |
| &ts_reset_active { |
| mux { |
| pins = "gpio16"; |
| }; |
| |
| config { |
| pins = "gpio16"; |
| }; |
| }; |
| |
| &ts_reset_suspend { |
| mux { |
| pins = "gpio16"; |
| }; |
| |
| config { |
| pins = "gpio16"; |
| }; |
| }; |
| |
| &ts_release { |
| mux { |
| pins = "gpio98", "gpio16"; |
| }; |
| |
| config { |
| pins = "gpio98", "gpio16"; |
| }; |
| }; |
| |
| &pm660_charger { |
| qcom,micro-usb; |
| }; |
| |
| &spi4_cs0_active { |
| mux { |
| pins = "gpio14"; |
| function = "blsp_spi4"; |
| }; |
| config { |
| pins = "gpio14"; |
| drive-strength = <2>; |
| bias-disable; /* No PULL */ |
| output-high; |
| }; |
| }; |
| |
| &mdss_dsi0 { |
| qcom,dsi-pref-prim-pan = <&dsi_auo_390p_cmd>; |
| qcom,platform-bklight-en-gpio = <&msm_gpio 52 0>; |
| qcom,platform-enable-gpio = <&msm_gpio 59 0>; |
| }; |