| /* |
| * MMC definitions for OMAP2 |
| * |
| * Copyright (C) 2006 Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define OMAP_MMC_MAX_SLOTS 2 |
| |
| struct mmc_card; |
| |
| struct omap_mmc_platform_data { |
| /* back-link to device */ |
| struct device *dev; |
| |
| /* number of slots per controller */ |
| unsigned nr_slots:2; |
| |
| /* set if your board has components or wiring that limits the |
| * maximum frequency on the MMC bus */ |
| unsigned int max_freq; |
| |
| /* switch the bus to a new slot */ |
| int (*switch_slot)(struct device *dev, int slot); |
| /* initialize board-specific MMC functionality, can be NULL if |
| * not supported */ |
| int (*init)(struct device *dev); |
| void (*cleanup)(struct device *dev); |
| void (*shutdown)(struct device *dev); |
| |
| /* Return context loss count due to PM states changing */ |
| int (*get_context_loss_count)(struct device *dev); |
| |
| /* Integrating attributes from the omap_hwmod layer */ |
| u8 controller_flags; |
| |
| /* Register offset deviation */ |
| u16 reg_offset; |
| |
| struct omap_mmc_slot_data { |
| |
| /* |
| * 4/8 wires and any additional host capabilities |
| * need to OR'd all capabilities (ref. linux/mmc/host.h) |
| */ |
| u8 wires; /* Used for the MMC driver on omap1 and 2420 */ |
| u32 caps; /* Used for the MMC driver on 2430 and later */ |
| u32 pm_caps; /* PM capabilities of the mmc */ |
| |
| /* |
| * nomux means "standard" muxing is wrong on this board, and |
| * that board-specific code handled it before common init logic. |
| */ |
| unsigned nomux:1; |
| |
| /* switch pin can be for card detect (default) or card cover */ |
| unsigned cover:1; |
| |
| /* use the internal clock */ |
| unsigned internal_clock:1; |
| |
| /* nonremovable e.g. eMMC */ |
| unsigned nonremovable:1; |
| |
| /* Try to sleep or power off when possible */ |
| unsigned power_saving:1; |
| |
| /* If using power_saving and the MMC power is not to go off */ |
| unsigned no_off:1; |
| |
| /* eMMC does not handle power off when not in sleep state */ |
| unsigned no_regulator_off_init:1; |
| |
| /* Regulator off remapped to sleep */ |
| unsigned vcc_aux_disable_is_sleep:1; |
| |
| /* we can put the features above into this variable */ |
| #define MMC_OMAP7XX (1 << 3) |
| #define MMC_OMAP15XX (1 << 4) |
| #define MMC_OMAP16XX (1 << 5) |
| unsigned features; |
| |
| int switch_pin; /* gpio (card detect) */ |
| int gpio_wp; /* gpio (write protect) */ |
| |
| int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); |
| int (*set_power)(struct device *dev, int slot, |
| int power_on, int vdd); |
| int (*get_ro)(struct device *dev, int slot); |
| void (*remux)(struct device *dev, int slot, int power_on); |
| /* Call back before enabling / disabling regulators */ |
| void (*before_set_reg)(struct device *dev, int slot, |
| int power_on, int vdd); |
| /* Call back after enabling / disabling regulators */ |
| void (*after_set_reg)(struct device *dev, int slot, |
| int power_on, int vdd); |
| /* if we have special card, init it using this callback */ |
| void (*init_card)(struct mmc_card *card); |
| |
| /* return MMC cover switch state, can be NULL if not supported. |
| * |
| * possible return values: |
| * 0 - closed |
| * 1 - open |
| */ |
| int (*get_cover_state)(struct device *dev, int slot); |
| |
| const char *name; |
| u32 ocr_mask; |
| |
| /* Card detection IRQs */ |
| int card_detect_irq; |
| int (*card_detect)(struct device *dev, int slot); |
| |
| unsigned int ban_openended:1; |
| |
| } slots[OMAP_MMC_MAX_SLOTS]; |
| }; |