drivers/clk/sunxi/clk-sun9i-core.c

/*
 * Copyright 2014 Chen-Yu Tsai
 *
 * Chen-Yu Tsai <wens@csie.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/log2.h>

#include "clk-factors.h"


/**
 * sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL1
 * PLL4 rate is calculated as follows
 * rate = (parent_rate * n >> p) / (m + 1);
 * parent_rate is always 24Mhz
 *
 * p and m are named div1 and div2 in Allwinner's SDK
 */

static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
				       u8 *n, u8 *k, u8 *m, u8 *p)
{
	int div;

	/* Normalize value to a 6M multiple */
	div = DIV_ROUND_UP(*freq, 6000000);

	/* divs above 256 cannot be odd */
	if (div > 256)
		div = round_up(div, 2);

	/* divs above 512 must be a multiple of 4 */
	if (div > 512)
		div = round_up(div, 4);

	*freq = 6000000 * div;

	/* we were called to round the frequency, we can now return */
	if (n == NULL)
		return;

	/* p will be 1 for divs under 512 */
	if (div < 512)
		*p = 1;
	else
		*p = 0;

	/* m will be 1 if div is odd */
	if (div & 1)
		*m = 1;
	else
		*m = 0;

	/* calculate a suitable n based on m and p */
	*n = div / (*p + 1) / (*m + 1);
}

static struct clk_factors_config sun9i_a80_pll4_config = {
	.mshift = 18,
	.mwidth = 1,
	.nshift = 8,
	.nwidth = 8,
	.pshift = 16,
	.pwidth = 1,
};

static const struct factors_data sun9i_a80_pll4_data __initconst = {
	.enable = 31,
	.table = &sun9i_a80_pll4_config,
	.getter = sun9i_a80_get_pll4_factors,
};

static DEFINE_SPINLOCK(sun9i_a80_pll4_lock);

static void __init sun9i_a80_pll4_setup(struct device_node *node)
{
	sunxi_factors_register(node, &sun9i_a80_pll4_data, &sun9i_a80_pll4_lock);
}
CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_setup);


/**
 * sun9i_a80_get_gt_factors() - calculates m factor for GT
 * GT rate is calculated as follows
 * rate = parent_rate / (m + 1);
 */

static void sun9i_a80_get_gt_factors(u32 *freq, u32 parent_rate,
				     u8 *n, u8 *k, u8 *m, u8 *p)
{
	u32 div;

	if (parent_rate < *freq)
		*freq = parent_rate;

	div = DIV_ROUND_UP(parent_rate, *freq);

	/* maximum divider is 4 */
	if (div > 4)
		div = 4;

	*freq = parent_rate / div;

	/* we were called to round the frequency, we can now return */
	if (!m)
		return;

	*m = div;
}

static struct clk_factors_config sun9i_a80_gt_config = {
	.mshift = 0,
	.mwidth = 2,
};

static const struct factors_data sun9i_a80_gt_data __initconst = {
	.mux = 24,
	.muxmask = BIT(1) | BIT(0),
	.table = &sun9i_a80_gt_config,
	.getter = sun9i_a80_get_gt_factors,
};

static DEFINE_SPINLOCK(sun9i_a80_gt_lock);

static void __init sun9i_a80_gt_setup(struct device_node *node)
{
	struct clk *gt = sunxi_factors_register(node, &sun9i_a80_gt_data,
						&sun9i_a80_gt_lock);

	/* The GT bus clock needs to be always enabled */
	__clk_get(gt);
	clk_prepare_enable(gt);
}
CLK_OF_DECLARE(sun9i_a80_gt, "allwinner,sun9i-a80-gt-clk", sun9i_a80_gt_setup);


/**
 * sun9i_a80_get_ahb_factors() - calculates p factor for AHB0/1/2
 * AHB rate is calculated as follows
 * rate = parent_rate >> p;
 */

static void sun9i_a80_get_ahb_factors(u32 *freq, u32 parent_rate,
				      u8 *n, u8 *k, u8 *m, u8 *p)
{
	u32 _p;

	if (parent_rate < *freq)
		*freq = parent_rate;

	_p = order_base_2(DIV_ROUND_UP(parent_rate, *freq));

	/* maximum p is 3 */
	if (_p > 3)
		_p = 3;

	*freq = parent_rate >> _p;

	/* we were called to round the frequency, we can now return */
	if (!p)
		return;

	*p = _p;
}

static struct clk_factors_config sun9i_a80_ahb_config = {
	.pshift = 0,
	.pwidth = 2,
};

static const struct factors_data sun9i_a80_ahb_data __initconst = {
	.mux = 24,
	.muxmask = BIT(1) | BIT(0),
	.table = &sun9i_a80_ahb_config,
	.getter = sun9i_a80_get_ahb_factors,
};

static DEFINE_SPINLOCK(sun9i_a80_ahb_lock);

static void __init sun9i_a80_ahb_setup(struct device_node *node)
{
	sunxi_factors_register(node, &sun9i_a80_ahb_data, &sun9i_a80_ahb_lock);
}
CLK_OF_DECLARE(sun9i_a80_ahb, "allwinner,sun9i-a80-ahb-clk", sun9i_a80_ahb_setup);


static const struct factors_data sun9i_a80_apb0_data __initconst = {
	.mux = 24,
	.muxmask = BIT(0),
	.table = &sun9i_a80_ahb_config,
	.getter = sun9i_a80_get_ahb_factors,
};

static DEFINE_SPINLOCK(sun9i_a80_apb0_lock);

static void __init sun9i_a80_apb0_setup(struct device_node *node)
{
	sunxi_factors_register(node, &sun9i_a80_apb0_data, &sun9i_a80_apb0_lock);
}
CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_setup);


/**
 * sun9i_a80_get_apb1_factors() - calculates m, p factors for APB1
 * APB1 rate is calculated as follows
 * rate = (parent_rate >> p) / (m + 1);
 */

static void sun9i_a80_get_apb1_factors(u32 *freq, u32 parent_rate,
				       u8 *n, u8 *k, u8 *m, u8 *p)
{
	u32 div;
	u8 calcm, calcp;

	if (parent_rate < *freq)
		*freq = parent_rate;

	div = DIV_ROUND_UP(parent_rate, *freq);

	/* Highest possible divider is 256 (p = 3, m = 31) */
	if (div > 256)
		div = 256;

	calcp = order_base_2(div);
	calcm = (parent_rate >> calcp) - 1;
	*freq = (parent_rate >> calcp) / (calcm + 1);

	/* we were called to round the frequency, we can now return */
	if (n == NULL)
		return;

	*m = calcm;
	*p = calcp;
}

static struct clk_factors_config sun9i_a80_apb1_config = {
	.mshift = 0,
	.mwidth = 5,
	.pshift = 16,
	.pwidth = 2,
};

static const struct factors_data sun9i_a80_apb1_data __initconst = {
	.mux = 24,
	.muxmask = BIT(0),
	.table = &sun9i_a80_apb1_config,
	.getter = sun9i_a80_get_apb1_factors,
};

static DEFINE_SPINLOCK(sun9i_a80_apb1_lock);

static void __init sun9i_a80_apb1_setup(struct device_node *node)
{
	sunxi_factors_register(node, &sun9i_a80_apb1_data, &sun9i_a80_apb1_lock);
}
CLK_OF_DECLARE(sun9i_a80_apb1, "allwinner,sun9i-a80-apb1-clk", sun9i_a80_apb1_setup);