Pratyush Anand has moved
pratyush.anand@st.com email-id doesn't exist anymore as I have left the
company. Replace ST's id with pratyush.anand@gmail.com.
Signed-off-by: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/.mailmap b/.mailmap
index 6287004..145eaa9 100644
--- a/.mailmap
+++ b/.mailmap
@@ -95,6 +95,7 @@
Peter A Jonsson <pj@ludd.ltu.se>
Peter Oruba <peter@oruba.de>
Peter Oruba <peter.oruba@amd.com>
+Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
Praveen BP <praveenbp@ti.com>
Rajesh Shah <rajesh.shah@intel.com>
Ralf Baechle <ralf@linux-mips.org>
diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget
index 8759881..840c324 100644
--- a/Documentation/ABI/testing/configfs-spear-pcie-gadget
+++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -1,7 +1,7 @@
What: /config/pcie-gadget
Date: Feb 2011
KernelVersion: 2.6.37
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Interface is used to configure selected dual mode PCIe controller
diff --git a/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/Documentation/ABI/testing/sysfs-bus-usb-lvstest
index aae68fc..5151290 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb-lvstest
+++ b/Documentation/ABI/testing/sysfs-bus-usb-lvstest
@@ -4,14 +4,14 @@
What: /sys/bus/usb/devices/.../get_dev_desc
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "Get Device Descriptor"
for Link Layer Validation device. It is needed for TD.7.06.
What: /sys/bus/usb/devices/.../u1_timeout
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Set "U1 timeout" for the downstream port where Link Layer
Validation device is connected. Timeout value must be between 0
@@ -19,7 +19,7 @@
What: /sys/bus/usb/devices/.../u2_timeout
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Set "U2 timeout" for the downstream port where Link Layer
Validation device is connected. Timeout value must be between 0
@@ -27,21 +27,21 @@
What: /sys/bus/usb/devices/.../hot_reset
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "Reset" for Link Layer Validation
device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35.
What: /sys/bus/usb/devices/.../u3_entry
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "U3 entry" for Link Layer
Validation device. It is needed for TD.7.35 and TD.7.36.
What: /sys/bus/usb/devices/.../u3_exit
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "U3 exit" for Link Layer
Validation device. It is needed for TD.7.36.
diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
index 02c13ef..89b88de 100644
--- a/Documentation/misc-devices/spear-pcie-gadget.txt
+++ b/Documentation/misc-devices/spear-pcie-gadget.txt
@@ -2,7 +2,7 @@
Author
=============
-Pratyush Anand (pratyush.anand@st.com)
+Pratyush Anand (pratyush.anand@gmail.com)
Location
============
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index fe3ad0c..b8374cd 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -2,7 +2,7 @@
* drivers/misc/spear13xx_pcie_gadget.c
*
* Copyright (C) 2010 ST Microelectronics
- * Pratyush Anand<pratyush.anand@st.com>
+ * Pratyush Anand<pratyush.anand@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/pci/host/pcie-spear13xx.c b/drivers/pci/host/pcie-spear13xx.c
index dfec428..3ba275a 100644
--- a/drivers/pci/host/pcie-spear13xx.c
+++ b/drivers/pci/host/pcie-spear13xx.c
@@ -4,7 +4,7 @@
* SPEAr13xx PCIe Glue Layer Source Code
*
* Copyright (C) 2010-2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
@@ -386,5 +386,5 @@
module_init(spear13xx_pcie_init);
MODULE_DESCRIPTION("ST Microelectronics SPEAr13xx PCIe host controller driver");
-MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c
index 65ae640..85d3e11 100644
--- a/drivers/phy/phy-spear1310-miphy.c
+++ b/drivers/phy/phy-spear1310-miphy.c
@@ -2,7 +2,7 @@
* ST SPEAr1310-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -257,5 +257,5 @@
module_platform_driver(spear1310_miphy_driver);
MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
-MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c
index 1a00c28..2f98eba 100644
--- a/drivers/phy/phy-spear1340-miphy.c
+++ b/drivers/phy/phy-spear1340-miphy.c
@@ -2,7 +2,7 @@
* ST spear1340-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -290,5 +290,5 @@
module_platform_driver(spear1340_miphy_driver);
MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
-MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index 62cb8cd..86b4e4b 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -4,7 +4,7 @@
* Test pattern generation for Link Layer Validation System Tests
*
* Copyright (C) 2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any