| /* |
| DVB device driver for em28xx |
| |
| (c) 2008 Mauro Carvalho Chehab <mchehab@infradead.org> |
| |
| (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com> |
| - Fixes for the driver to properly work with HVR-950 |
| |
| (c) 2008 Aidan Thornton <makosoft@googlemail.com> |
| |
| Based on cx88-dvb, saa7134-dvb and videobuf-dvb originally written by: |
| (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au> |
| (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/usb.h> |
| |
| #include "em28xx.h" |
| #include <media/v4l2-common.h> |
| #include <media/videobuf-vmalloc.h> |
| |
| #include "lgdt330x.h" |
| #include "zl10353.h" |
| |
| MODULE_DESCRIPTION("driver for em28xx based DVB cards"); |
| MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages [dvb]"); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| #define dprintk(level, fmt, arg...) do { \ |
| if (debug >= level) \ |
| printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \ |
| } while (0) |
| |
| #define EM28XX_DVB_NUM_BUFS 5 |
| #define EM28XX_DVB_MAX_PACKETSIZE 564 |
| #define EM28XX_DVB_MAX_PACKETS 64 |
| |
| struct em28xx_dvb { |
| struct dvb_frontend *frontend; |
| |
| /* feed count management */ |
| struct mutex lock; |
| int nfeeds; |
| |
| /* general boilerplate stuff */ |
| struct dvb_adapter adapter; |
| struct dvb_demux demux; |
| struct dmxdev dmxdev; |
| struct dmx_frontend fe_hw; |
| struct dmx_frontend fe_mem; |
| struct dvb_net net; |
| }; |
| |
| |
| static inline void print_err_status(struct em28xx *dev, |
| int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch (status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronuously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronuously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet < 0) { |
| dprintk(1, "URB status %d [%s].\n", status, errmsg); |
| } else { |
| dprintk(1, "URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| static inline int dvb_isoc_copy(struct em28xx *dev, struct urb *urb) |
| { |
| int i; |
| |
| if (!dev) |
| return 0; |
| |
| if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED)) |
| return 0; |
| |
| if (urb->status < 0) { |
| print_err_status(dev, -1, urb->status); |
| if (urb->status == -ENOENT) |
| return 0; |
| } |
| |
| for (i = 0; i < urb->number_of_packets; i++) { |
| int status = urb->iso_frame_desc[i].status; |
| |
| if (status < 0) { |
| print_err_status(dev, i, status); |
| if (urb->iso_frame_desc[i].status != -EPROTO) |
| continue; |
| } |
| |
| dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer + |
| urb->iso_frame_desc[i].offset, |
| urb->iso_frame_desc[i].actual_length); |
| } |
| |
| return 0; |
| } |
| |
| static int start_streaming(struct em28xx_dvb *dvb) |
| { |
| int rc; |
| struct em28xx *dev = dvb->adapter.priv; |
| |
| usb_set_interface(dev->udev, 0, 1); |
| rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); |
| if (rc < 0) |
| return rc; |
| |
| return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, |
| EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE, |
| dvb_isoc_copy); |
| } |
| |
| static int stop_streaming(struct em28xx_dvb *dvb) |
| { |
| struct em28xx *dev = dvb->adapter.priv; |
| |
| em28xx_uninit_isoc(dev); |
| |
| em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); |
| |
| return 0; |
| } |
| |
| static int start_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct em28xx_dvb *dvb = demux->priv; |
| int rc, ret; |
| |
| if (!demux->dmx.frontend) |
| return -EINVAL; |
| |
| mutex_lock(&dvb->lock); |
| dvb->nfeeds++; |
| rc = dvb->nfeeds; |
| |
| if (dvb->nfeeds == 1) { |
| ret = start_streaming(dvb); |
| if (ret < 0) |
| rc = ret; |
| } |
| |
| mutex_unlock(&dvb->lock); |
| return rc; |
| } |
| |
| static int stop_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct em28xx_dvb *dvb = demux->priv; |
| int err = 0; |
| |
| mutex_lock(&dvb->lock); |
| dvb->nfeeds--; |
| |
| if (0 == dvb->nfeeds) |
| err = stop_streaming(dvb); |
| |
| mutex_unlock(&dvb->lock); |
| return err; |
| } |
| |
| |
| |
| /* ------------------------------------------------------------------ */ |
| static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire) |
| { |
| struct em28xx *dev = fe->dvb->priv; |
| |
| if (acquire) |
| return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); |
| else |
| return em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static struct lgdt330x_config em2880_lgdt3303_dev = { |
| .demod_address = 0x0e, |
| .demod_chip = LGDT3303, |
| }; |
| |
| static struct zl10353_config em28xx_zl10353_with_xc3028 = { |
| .demod_address = (0x1e >> 1), |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| .if2 = 45600, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int attach_xc3028(u8 addr, struct em28xx *dev) |
| { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg; |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| cfg.i2c_adap = &dev->i2c_adap; |
| cfg.i2c_addr = addr; |
| cfg.callback = em28xx_tuner_callback; |
| |
| if (!dev->dvb->frontend) { |
| printk(KERN_ERR "%s/2: dvb frontend not attached. " |
| "Can't attach xc3028\n", |
| dev->name); |
| return -EINVAL; |
| } |
| |
| fe = dvb_attach(xc2028_attach, dev->dvb->frontend, &cfg); |
| if (!fe) { |
| printk(KERN_ERR "%s/2: xc3028 attach failed\n", |
| dev->name); |
| dvb_frontend_detach(dev->dvb->frontend); |
| dev->dvb->frontend = NULL; |
| return -EINVAL; |
| } |
| |
| printk(KERN_INFO "%s/2: xc3028 attached\n", dev->name); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| int register_dvb(struct em28xx_dvb *dvb, |
| struct module *module, |
| struct em28xx *dev, |
| struct device *device) |
| { |
| int result; |
| |
| mutex_init(&dvb->lock); |
| |
| /* register adapter */ |
| result = dvb_register_adapter(&dvb->adapter, dev->name, module, device, |
| adapter_nr); |
| if (result < 0) { |
| printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_adapter; |
| } |
| |
| /* Ensure all frontends negotiate bus access */ |
| dvb->frontend->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl; |
| |
| dvb->adapter.priv = dev; |
| |
| /* register frontend */ |
| result = dvb_register_frontend(&dvb->adapter, dvb->frontend); |
| if (result < 0) { |
| printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_frontend; |
| } |
| |
| /* register demux stuff */ |
| dvb->demux.dmx.capabilities = |
| DMX_TS_FILTERING | DMX_SECTION_FILTERING | |
| DMX_MEMORY_BASED_FILTERING; |
| dvb->demux.priv = dvb; |
| dvb->demux.filternum = 256; |
| dvb->demux.feednum = 256; |
| dvb->demux.start_feed = start_feed; |
| dvb->demux.stop_feed = stop_feed; |
| |
| result = dvb_dmx_init(&dvb->demux); |
| if (result < 0) { |
| printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_dmx; |
| } |
| |
| dvb->dmxdev.filternum = 256; |
| dvb->dmxdev.demux = &dvb->demux.dmx; |
| dvb->dmxdev.capabilities = 0; |
| result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); |
| if (result < 0) { |
| printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_dmxdev; |
| } |
| |
| dvb->fe_hw.source = DMX_FRONTEND_0; |
| result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| if (result < 0) { |
| printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", |
| dev->name, result); |
| goto fail_fe_hw; |
| } |
| |
| dvb->fe_mem.source = DMX_MEMORY_FE; |
| result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| if (result < 0) { |
| printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", |
| dev->name, result); |
| goto fail_fe_mem; |
| } |
| |
| result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| if (result < 0) { |
| printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_fe_conn; |
| } |
| |
| /* register network adapter */ |
| dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); |
| return 0; |
| |
| fail_fe_conn: |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| fail_fe_mem: |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| fail_fe_hw: |
| dvb_dmxdev_release(&dvb->dmxdev); |
| fail_dmxdev: |
| dvb_dmx_release(&dvb->demux); |
| fail_dmx: |
| dvb_unregister_frontend(dvb->frontend); |
| fail_frontend: |
| dvb_frontend_detach(dvb->frontend); |
| dvb_unregister_adapter(&dvb->adapter); |
| fail_adapter: |
| return result; |
| } |
| |
| static void unregister_dvb(struct em28xx_dvb *dvb) |
| { |
| dvb_net_release(&dvb->net); |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| dvb_dmxdev_release(&dvb->dmxdev); |
| dvb_dmx_release(&dvb->demux); |
| dvb_unregister_frontend(dvb->frontend); |
| dvb_frontend_detach(dvb->frontend); |
| dvb_unregister_adapter(&dvb->adapter); |
| } |
| |
| |
| static int dvb_init(struct em28xx *dev) |
| { |
| int result = 0; |
| struct em28xx_dvb *dvb; |
| |
| if (!dev->has_dvb) { |
| /* This device does not support the extension */ |
| return 0; |
| } |
| |
| dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL); |
| |
| if (dvb == NULL) { |
| printk(KERN_INFO "em28xx_dvb: memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| dev->dvb = dvb; |
| |
| em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); |
| /* init frontend */ |
| switch (dev->model) { |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: |
| dvb->frontend = dvb_attach(lgdt330x_attach, |
| &em2880_lgdt3303_dev, |
| &dev->i2c_adap); |
| if (attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: |
| dvb->frontend = dvb_attach(zl10353_attach, |
| &em28xx_zl10353_with_xc3028, |
| &dev->i2c_adap); |
| if (attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| default: |
| printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" |
| " isn't supported yet\n", |
| dev->name); |
| break; |
| } |
| if (NULL == dvb->frontend) { |
| printk(KERN_ERR |
| "%s/2: frontend initialization failed\n", |
| dev->name); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* register everything */ |
| result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev); |
| |
| if (result < 0) |
| goto out_free; |
| |
| em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); |
| printk(KERN_INFO "Successfully loaded em28xx-dvb\n"); |
| return 0; |
| |
| out_free: |
| em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); |
| kfree(dvb); |
| dev->dvb = NULL; |
| return result; |
| } |
| |
| static int dvb_fini(struct em28xx *dev) |
| { |
| if (!dev->has_dvb) { |
| /* This device does not support the extension */ |
| return 0; |
| } |
| |
| if (dev->dvb) { |
| unregister_dvb(dev->dvb); |
| dev->dvb = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static struct em28xx_ops dvb_ops = { |
| .id = EM28XX_DVB, |
| .name = "Em28xx dvb Extension", |
| .init = dvb_init, |
| .fini = dvb_fini, |
| }; |
| |
| static int __init em28xx_dvb_register(void) |
| { |
| return em28xx_register_extension(&dvb_ops); |
| } |
| |
| static void __exit em28xx_dvb_unregister(void) |
| { |
| em28xx_unregister_extension(&dvb_ops); |
| } |
| |
| module_init(em28xx_dvb_register); |
| module_exit(em28xx_dvb_unregister); |