| /* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */ |
| /* |
| Written 1997-2001 by Donald Becker. |
| |
| This software may be used and distributed according to the terms of |
| the GNU General Public License (GPL), incorporated herein by reference. |
| Drivers based on or derived from this code fall under the GPL and must |
| retain the authorship, copyright and license notice. This file is not |
| a complete program and may only be used when the entire operating |
| system is licensed under the GPL. |
| |
| This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter. |
| It also supports the Symbios Logic version of the same chip core. |
| |
| The author may be reached as becker@scyld.com, or C/O |
| Scyld Computing Corporation |
| 410 Severn Ave., Suite 210 |
| Annapolis MD 21403 |
| |
| Support and updates available at |
| http://www.scyld.com/network/yellowfin.html |
| [link no longer provides useful info -jgarzik] |
| |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define DRV_NAME "yellowfin" |
| #define DRV_VERSION "2.1" |
| #define DRV_RELDATE "Sep 11, 2006" |
| |
| /* The user-configurable values. |
| These may be modified when a driver module is loaded.*/ |
| |
| static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ |
| /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ |
| static int max_interrupt_work = 20; |
| static int mtu; |
| #ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */ |
| /* System-wide count of bogus-rx frames. */ |
| static int bogus_rx; |
| static int dma_ctrl = 0x004A0263; /* Constrained by errata */ |
| static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */ |
| #elif defined(YF_NEW) /* A future perfect board :->. */ |
| static int dma_ctrl = 0x00CAC277; /* Override when loading module! */ |
| static int fifo_cfg = 0x0028; |
| #else |
| static const int dma_ctrl = 0x004A0263; /* Constrained by errata */ |
| static const int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */ |
| #endif |
| |
| /* Set the copy breakpoint for the copy-only-tiny-frames scheme. |
| Setting to > 1514 effectively disables this feature. */ |
| static int rx_copybreak; |
| |
| /* Used to pass the media type, etc. |
| No media types are currently defined. These exist for driver |
| interoperability. |
| */ |
| #define MAX_UNITS 8 /* More are supported, limit only on options */ |
| static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; |
| static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; |
| |
| /* Do ugly workaround for GX server chipset errata. */ |
| static int gx_fix; |
| |
| /* Operational parameters that are set at compile time. */ |
| |
| /* Keep the ring sizes a power of two for efficiency. |
| Making the Tx ring too long decreases the effectiveness of channel |
| bonding and packet priority. |
| There are no ill effects from too-large receive rings. */ |
| #define TX_RING_SIZE 16 |
| #define TX_QUEUE_SIZE 12 /* Must be > 4 && <= TX_RING_SIZE */ |
| #define RX_RING_SIZE 64 |
| #define STATUS_TOTAL_SIZE TX_RING_SIZE*sizeof(struct tx_status_words) |
| #define TX_TOTAL_SIZE 2*TX_RING_SIZE*sizeof(struct yellowfin_desc) |
| #define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct yellowfin_desc) |
| |
| /* Operational parameters that usually are not changed. */ |
| /* Time in jiffies before concluding the transmitter is hung. */ |
| #define TX_TIMEOUT (2*HZ) |
| #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ |
| |
| #define yellowfin_debug debug |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/mii.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/ethtool.h> |
| #include <linux/crc32.h> |
| #include <linux/bitops.h> |
| #include <asm/uaccess.h> |
| #include <asm/processor.h> /* Processor type for cache alignment. */ |
| #include <asm/unaligned.h> |
| #include <asm/io.h> |
| |
| /* These identify the driver base version and may not be removed. */ |
| static const char version[] __devinitconst = |
| KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n" |
| " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; |
| |
| MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); |
| MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(max_interrupt_work, int, 0); |
| module_param(mtu, int, 0); |
| module_param(debug, int, 0); |
| module_param(rx_copybreak, int, 0); |
| module_param_array(options, int, NULL, 0); |
| module_param_array(full_duplex, int, NULL, 0); |
| module_param(gx_fix, int, 0); |
| MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt"); |
| MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)"); |
| MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)"); |
| MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames"); |
| MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex"); |
| MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)"); |
| MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)"); |
| |
| /* |
| Theory of Operation |
| |
| I. Board Compatibility |
| |
| This device driver is designed for the Packet Engines "Yellowfin" Gigabit |
| Ethernet adapter. The G-NIC 64-bit PCI card is supported, as well as the |
| Symbios 53C885E dual function chip. |
| |
| II. Board-specific settings |
| |
| PCI bus devices are configured by the system at boot time, so no jumpers |
| need to be set on the board. The system BIOS preferably should assign the |
| PCI INTA signal to an otherwise unused system IRQ line. |
| Note: Kernel versions earlier than 1.3.73 do not support shared PCI |
| interrupt lines. |
| |
| III. Driver operation |
| |
| IIIa. Ring buffers |
| |
| The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple. |
| This is a descriptor list scheme similar to that used by the EEPro100 and |
| Tulip. This driver uses two statically allocated fixed-size descriptor lists |
| formed into rings by a branch from the final descriptor to the beginning of |
| the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. |
| |
| The driver allocates full frame size skbuffs for the Rx ring buffers at |
| open() time and passes the skb->data field to the Yellowfin as receive data |
| buffers. When an incoming frame is less than RX_COPYBREAK bytes long, |
| a fresh skbuff is allocated and the frame is copied to the new skbuff. |
| When the incoming frame is larger, the skbuff is passed directly up the |
| protocol stack and replaced by a newly allocated skbuff. |
| |
| The RX_COPYBREAK value is chosen to trade-off the memory wasted by |
| using a full-sized skbuff for small frames vs. the copying costs of larger |
| frames. For small frames the copying cost is negligible (esp. considering |
| that we are pre-loading the cache with immediately useful header |
| information). For large frames the copying cost is non-trivial, and the |
| larger copy might flush the cache of useful data. |
| |
| IIIC. Synchronization |
| |
| The driver runs as two independent, single-threaded flows of control. One |
| is the send-packet routine, which enforces single-threaded use by the |
| dev->tbusy flag. The other thread is the interrupt handler, which is single |
| threaded by the hardware and other software. |
| |
| The send packet thread has partial control over the Tx ring and 'dev->tbusy' |
| flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next |
| queue slot is empty, it clears the tbusy flag when finished otherwise it sets |
| the 'yp->tx_full' flag. |
| |
| The interrupt handler has exclusive control over the Rx ring and records stats |
| from the Tx ring. After reaping the stats, it marks the Tx queue entry as |
| empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it |
| clears both the tx_full and tbusy flags. |
| |
| IV. Notes |
| |
| Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards. |
| Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board |
| and an AlphaStation to verifty the Alpha port! |
| |
| IVb. References |
| |
| Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential |
| Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary |
| Data Manual v3.0 |
| http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html |
| http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html |
| |
| IVc. Errata |
| |
| See Packet Engines confidential appendix (prototype chips only). |
| */ |
| |
| |
| |
| enum capability_flags { |
| HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16, |
| HasMACAddrBug=32, /* Only on early revs. */ |
| DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */ |
| }; |
| |
| /* The PCI I/O space extent. */ |
| enum { |
| YELLOWFIN_SIZE = 0x100, |
| }; |
| |
| struct pci_id_info { |
| const char *name; |
| struct match_info { |
| int pci, pci_mask, subsystem, subsystem_mask; |
| int revision, revision_mask; /* Only 8 bits. */ |
| } id; |
| int drv_flags; /* Driver use, intended as capability flags. */ |
| }; |
| |
| static const struct pci_id_info pci_id_tbl[] = { |
| {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff}, |
| FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom}, |
| {"Symbios SYM83C885", { 0x07011000, 0xffffffff}, |
| HasMII | DontUseEeprom }, |
| { } |
| }; |
| |
| static DEFINE_PCI_DEVICE_TABLE(yellowfin_pci_tbl) = { |
| { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl); |
| |
| |
| /* Offsets to the Yellowfin registers. Various sizes and alignments. */ |
| enum yellowfin_offsets { |
| TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C, |
| TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18, |
| RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C, |
| RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58, |
| EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86, |
| ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94, |
| Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4, |
| MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC, |
| MII_Status=0xAE, |
| RxDepth=0xB8, FlowCtrl=0xBC, |
| AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8, |
| EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4, |
| EEFeature=0xF5, |
| }; |
| |
| /* The Yellowfin Rx and Tx buffer descriptors. |
| Elements are written as 32 bit for endian portability. */ |
| struct yellowfin_desc { |
| __le32 dbdma_cmd; |
| __le32 addr; |
| __le32 branch_addr; |
| __le32 result_status; |
| }; |
| |
| struct tx_status_words { |
| #ifdef __BIG_ENDIAN |
| u16 tx_errs; |
| u16 tx_cnt; |
| u16 paused; |
| u16 total_tx_cnt; |
| #else /* Little endian chips. */ |
| u16 tx_cnt; |
| u16 tx_errs; |
| u16 total_tx_cnt; |
| u16 paused; |
| #endif /* __BIG_ENDIAN */ |
| }; |
| |
| /* Bits in yellowfin_desc.cmd */ |
| enum desc_cmd_bits { |
| CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000, |
| CMD_NOP=0x60000000, CMD_STOP=0x70000000, |
| BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000, |
| BRANCH_IFTRUE=0x040000, |
| }; |
| |
| /* Bits in yellowfin_desc.status */ |
| enum desc_status_bits { RX_EOP=0x0040, }; |
| |
| /* Bits in the interrupt status/mask registers. */ |
| enum intr_status_bits { |
| IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08, |
| IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80, |
| IntrEarlyRx=0x100, IntrWakeup=0x200, }; |
| |
| #define PRIV_ALIGN 31 /* Required alignment mask */ |
| #define MII_CNT 4 |
| struct yellowfin_private { |
| /* Descriptor rings first for alignment. |
| Tx requires a second descriptor for status. */ |
| struct yellowfin_desc *rx_ring; |
| struct yellowfin_desc *tx_ring; |
| struct sk_buff* rx_skbuff[RX_RING_SIZE]; |
| struct sk_buff* tx_skbuff[TX_RING_SIZE]; |
| dma_addr_t rx_ring_dma; |
| dma_addr_t tx_ring_dma; |
| |
| struct tx_status_words *tx_status; |
| dma_addr_t tx_status_dma; |
| |
| struct timer_list timer; /* Media selection timer. */ |
| /* Frequently used and paired value: keep adjacent for cache effect. */ |
| int chip_id, drv_flags; |
| struct pci_dev *pci_dev; |
| unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ |
| unsigned int rx_buf_sz; /* Based on MTU+slack. */ |
| struct tx_status_words *tx_tail_desc; |
| unsigned int cur_tx, dirty_tx; |
| int tx_threshold; |
| unsigned int tx_full:1; /* The Tx queue is full. */ |
| unsigned int full_duplex:1; /* Full-duplex operation requested. */ |
| unsigned int duplex_lock:1; |
| unsigned int medialock:1; /* Do not sense media. */ |
| unsigned int default_port:4; /* Last dev->if_port value. */ |
| /* MII transceiver section. */ |
| int mii_cnt; /* MII device addresses. */ |
| u16 advertising; /* NWay media advertisement */ |
| unsigned char phys[MII_CNT]; /* MII device addresses, only first one used */ |
| spinlock_t lock; |
| void __iomem *base; |
| }; |
| |
| static int read_eeprom(void __iomem *ioaddr, int location); |
| static int mdio_read(void __iomem *ioaddr, int phy_id, int location); |
| static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value); |
| static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
| static int yellowfin_open(struct net_device *dev); |
| static void yellowfin_timer(unsigned long data); |
| static void yellowfin_tx_timeout(struct net_device *dev); |
| static int yellowfin_init_ring(struct net_device *dev); |
| static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb, |
| struct net_device *dev); |
| static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance); |
| static int yellowfin_rx(struct net_device *dev); |
| static void yellowfin_error(struct net_device *dev, int intr_status); |
| static int yellowfin_close(struct net_device *dev); |
| static void set_rx_mode(struct net_device *dev); |
| static const struct ethtool_ops ethtool_ops; |
| |
| static const struct net_device_ops netdev_ops = { |
| .ndo_open = yellowfin_open, |
| .ndo_stop = yellowfin_close, |
| .ndo_start_xmit = yellowfin_start_xmit, |
| .ndo_set_multicast_list = set_rx_mode, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_do_ioctl = netdev_ioctl, |
| .ndo_tx_timeout = yellowfin_tx_timeout, |
| }; |
| |
| static int __devinit yellowfin_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *dev; |
| struct yellowfin_private *np; |
| int irq; |
| int chip_idx = ent->driver_data; |
| static int find_cnt; |
| void __iomem *ioaddr; |
| int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; |
| int drv_flags = pci_id_tbl[chip_idx].drv_flags; |
| void *ring_space; |
| dma_addr_t ring_dma; |
| #ifdef USE_IO_OPS |
| int bar = 0; |
| #else |
| int bar = 1; |
| #endif |
| |
| /* when built into the kernel, we only print version if device is found */ |
| #ifndef MODULE |
| static int printed_version; |
| if (!printed_version++) |
| printk(version); |
| #endif |
| |
| i = pci_enable_device(pdev); |
| if (i) return i; |
| |
| dev = alloc_etherdev(sizeof(*np)); |
| if (!dev) { |
| pr_err("cannot allocate ethernet device\n"); |
| return -ENOMEM; |
| } |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| np = netdev_priv(dev); |
| |
| if (pci_request_regions(pdev, DRV_NAME)) |
| goto err_out_free_netdev; |
| |
| pci_set_master (pdev); |
| |
| ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE); |
| if (!ioaddr) |
| goto err_out_free_res; |
| |
| irq = pdev->irq; |
| |
| if (drv_flags & DontUseEeprom) |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i); |
| else { |
| int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0); |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i); |
| } |
| |
| /* Reset the chip. */ |
| iowrite32(0x80000000, ioaddr + DMACtrl); |
| |
| dev->base_addr = (unsigned long)ioaddr; |
| dev->irq = irq; |
| |
| pci_set_drvdata(pdev, dev); |
| spin_lock_init(&np->lock); |
| |
| np->pci_dev = pdev; |
| np->chip_id = chip_idx; |
| np->drv_flags = drv_flags; |
| np->base = ioaddr; |
| |
| ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma); |
| if (!ring_space) |
| goto err_out_cleardev; |
| np->tx_ring = (struct yellowfin_desc *)ring_space; |
| np->tx_ring_dma = ring_dma; |
| |
| ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma); |
| if (!ring_space) |
| goto err_out_unmap_tx; |
| np->rx_ring = (struct yellowfin_desc *)ring_space; |
| np->rx_ring_dma = ring_dma; |
| |
| ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma); |
| if (!ring_space) |
| goto err_out_unmap_rx; |
| np->tx_status = (struct tx_status_words *)ring_space; |
| np->tx_status_dma = ring_dma; |
| |
| if (dev->mem_start) |
| option = dev->mem_start; |
| |
| /* The lower four bits are the media type. */ |
| if (option > 0) { |
| if (option & 0x200) |
| np->full_duplex = 1; |
| np->default_port = option & 15; |
| if (np->default_port) |
| np->medialock = 1; |
| } |
| if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0) |
| np->full_duplex = 1; |
| |
| if (np->full_duplex) |
| np->duplex_lock = 1; |
| |
| /* The Yellowfin-specific entries in the device structure. */ |
| dev->netdev_ops = &netdev_ops; |
| SET_ETHTOOL_OPS(dev, ðtool_ops); |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| if (mtu) |
| dev->mtu = mtu; |
| |
| i = register_netdev(dev); |
| if (i) |
| goto err_out_unmap_status; |
| |
| netdev_info(dev, "%s type %8x at %p, %pM, IRQ %d\n", |
| pci_id_tbl[chip_idx].name, |
| ioread32(ioaddr + ChipRev), ioaddr, |
| dev->dev_addr, irq); |
| |
| if (np->drv_flags & HasMII) { |
| int phy, phy_idx = 0; |
| for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) { |
| int mii_status = mdio_read(ioaddr, phy, 1); |
| if (mii_status != 0xffff && mii_status != 0x0000) { |
| np->phys[phy_idx++] = phy; |
| np->advertising = mdio_read(ioaddr, phy, 4); |
| netdev_info(dev, "MII PHY found at address %d, status 0x%04x advertising %04x\n", |
| phy, mii_status, np->advertising); |
| } |
| } |
| np->mii_cnt = phy_idx; |
| } |
| |
| find_cnt++; |
| |
| return 0; |
| |
| err_out_unmap_status: |
| pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status, |
| np->tx_status_dma); |
| err_out_unmap_rx: |
| pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); |
| err_out_unmap_tx: |
| pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); |
| err_out_cleardev: |
| pci_set_drvdata(pdev, NULL); |
| pci_iounmap(pdev, ioaddr); |
| err_out_free_res: |
| pci_release_regions(pdev); |
| err_out_free_netdev: |
| free_netdev (dev); |
| return -ENODEV; |
| } |
| |
| static int __devinit read_eeprom(void __iomem *ioaddr, int location) |
| { |
| int bogus_cnt = 10000; /* Typical 33Mhz: 1050 ticks */ |
| |
| iowrite8(location, ioaddr + EEAddr); |
| iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl); |
| while ((ioread8(ioaddr + EEStatus) & 0x80) && --bogus_cnt > 0) |
| ; |
| return ioread8(ioaddr + EERead); |
| } |
| |
| /* MII Managemen Data I/O accesses. |
| These routines assume the MDIO controller is idle, and do not exit until |
| the command is finished. */ |
| |
| static int mdio_read(void __iomem *ioaddr, int phy_id, int location) |
| { |
| int i; |
| |
| iowrite16((phy_id<<8) + location, ioaddr + MII_Addr); |
| iowrite16(1, ioaddr + MII_Cmd); |
| for (i = 10000; i >= 0; i--) |
| if ((ioread16(ioaddr + MII_Status) & 1) == 0) |
| break; |
| return ioread16(ioaddr + MII_Rd_Data); |
| } |
| |
| static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value) |
| { |
| int i; |
| |
| iowrite16((phy_id<<8) + location, ioaddr + MII_Addr); |
| iowrite16(value, ioaddr + MII_Wr_Data); |
| |
| /* Wait for the command to finish. */ |
| for (i = 10000; i >= 0; i--) |
| if ((ioread16(ioaddr + MII_Status) & 1) == 0) |
| break; |
| } |
| |
| |
| static int yellowfin_open(struct net_device *dev) |
| { |
| struct yellowfin_private *yp = netdev_priv(dev); |
| void __iomem *ioaddr = yp->base; |
| int i, ret; |
| |
| /* Reset the chip. */ |
| iowrite32(0x80000000, ioaddr + DMACtrl); |
| |
| ret = request_irq(dev->irq, yellowfin_interrupt, IRQF_SHARED, dev->name, dev); |
| if (ret) |
| return ret; |
| |
| if (yellowfin_debug > 1) |
| netdev_printk(KERN_DEBUG, dev, "%s() irq %d\n", |
| __func__, dev->irq); |
| |
| ret = yellowfin_init_ring(dev); |
| if (ret) { |
| free_irq(dev->irq, dev); |
| return ret; |
| } |
| |
| iowrite32(yp->rx_ring_dma, ioaddr + RxPtr); |
| iowrite32(yp->tx_ring_dma, ioaddr + TxPtr); |
| |
| for (i = 0; i < 6; i++) |
| iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i); |
| |
| /* Set up various condition 'select' registers. |
| There are no options here. */ |
| iowrite32(0x00800080, ioaddr + TxIntrSel); /* Interrupt on Tx abort */ |
| iowrite32(0x00800080, ioaddr + TxBranchSel); /* Branch on Tx abort */ |
| iowrite32(0x00400040, ioaddr + TxWaitSel); /* Wait on Tx status */ |
| iowrite32(0x00400040, ioaddr + RxIntrSel); /* Interrupt on Rx done */ |
| iowrite32(0x00400040, ioaddr + RxBranchSel); /* Branch on Rx error */ |
| iowrite32(0x00400040, ioaddr + RxWaitSel); /* Wait on Rx done */ |
| |
| /* Initialize other registers: with so many this eventually this will |
| converted to an offset/value list. */ |
| iowrite32(dma_ctrl, ioaddr + DMACtrl); |
| iowrite16(fifo_cfg, ioaddr + FIFOcfg); |
| /* Enable automatic generation of flow control frames, period 0xffff. */ |
| iowrite32(0x0030FFFF, ioaddr + FlowCtrl); |
| |
| yp->tx_threshold = 32; |
| iowrite32(yp->tx_threshold, ioaddr + TxThreshold); |
| |
| if (dev->if_port == 0) |
| dev->if_port = yp->default_port; |
| |
| netif_start_queue(dev); |
| |
| /* Setting the Rx mode will start the Rx process. */ |
| if (yp->drv_flags & IsGigabit) { |
| /* We are always in full-duplex mode with gigabit! */ |
| yp->full_duplex = 1; |
| iowrite16(0x01CF, ioaddr + Cnfg); |
| } else { |
| iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */ |
| iowrite16(0x1018, ioaddr + FrameGap1); |
| iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg); |
| } |
| set_rx_mode(dev); |
| |
| /* Enable interrupts by setting the interrupt mask. */ |
| iowrite16(0x81ff, ioaddr + IntrEnb); /* See enum intr_status_bits */ |
| iowrite16(0x0000, ioaddr + EventStatus); /* Clear non-interrupting events */ |
| iowrite32(0x80008000, ioaddr + RxCtrl); /* Start Rx and Tx channels. */ |
| iowrite32(0x80008000, ioaddr + TxCtrl); |
| |
| if (yellowfin_debug > 2) { |
| netdev_printk(KERN_DEBUG, dev, "Done %s()\n", __func__); |
| } |
| |
| /* Set the timer to check for link beat. */ |
| init_timer(&yp->timer); |
| yp->timer.expires = jiffies + 3*HZ; |
| yp->timer.data = (unsigned long)dev; |
| yp->timer.function = &yellowfin_timer; /* timer handler */ |
| add_timer(&yp->timer); |
| |
| return 0; |
| } |
| |
| static void yellowfin_timer(unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| struct yellowfin_private *yp = netdev_priv(dev); |
| void __iomem *ioaddr = yp->base; |
| int next_tick = 60*HZ; |
| |
| if (yellowfin_debug > 3) { |
| netdev_printk(KERN_DEBUG, dev, "Yellowfin timer tick, status %08x\n", |
| ioread16(ioaddr + IntrStatus)); |
| } |
| |
| if (yp->mii_cnt) { |
| int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR); |
| int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA); |
| int negotiated = lpa & yp->advertising; |
| if (yellowfin_debug > 1) |
| netdev_printk(KERN_DEBUG, dev, "MII #%d status register is %04x, link partner capability %04x\n", |
| yp->phys[0], bmsr, lpa); |
| |
| yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated); |
| |
| iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg); |
| |
| if (bmsr & BMSR_LSTATUS) |
| next_tick = 60*HZ; |
| else |
| next_tick = 3*HZ; |
| } |
| |
| yp->timer.expires = jiffies + next_tick; |
| add_timer(&yp->timer); |
| } |
| |
| static void yellowfin_tx_timeout(struct net_device *dev) |
| { |
| struct yellowfin_private *yp = netdev_priv(dev); |
| void __iomem *ioaddr = yp->base; |
| |
| netdev_warn(dev, "Yellowfin transmit timed out at %d/%d Tx status %04x, Rx status %04x, resetting...\n", |
| yp->cur_tx, yp->dirty_tx, |
| ioread32(ioaddr + TxStatus), |
| ioread32(ioaddr + RxStatus)); |
| |
| /* Note: these should be KERN_DEBUG. */ |
| if (yellowfin_debug) { |
| int i; |
| pr_warning(" Rx ring %p: ", yp->rx_ring); |
| for (i = 0; i < RX_RING_SIZE; i++) |
| pr_cont(" %08x", yp->rx_ring[i].result_status); |
| pr_cont("\n"); |
| pr_warning(" Tx ring %p: ", yp->tx_ring); |
| for (i = 0; i < TX_RING_SIZE; i++) |
| pr_cont(" %04x /%08x", |
| yp->tx_status[i].tx_errs, |
| yp->tx_ring[i].result_status); |
| pr_cont("\n"); |
| } |
| |
| /* If the hardware is found to hang regularly, we will update the code |
| to reinitialize the chip here. */ |
| dev->if_port = 0; |
| |
| /* Wake the potentially-idle transmit channel. */ |
| iowrite32(0x10001000, yp->base + TxCtrl); |
| if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE) |
| netif_wake_queue (dev); /* Typical path */ |
| |
| dev->trans_start = jiffies; /* prevent tx timeout */ |
| dev->stats.tx_errors++; |
| } |
| |
| /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ |
| static int yellowfin_init_ring(struct net_device *dev) |
| { |
| struct yellowfin_private *yp = netdev_priv(dev); |
| int i, j; |
| |
| yp->tx_full = 0; |
| yp->cur_rx = yp->cur_tx = 0; |
| yp->dirty_tx = 0; |
| |
| yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); |
| |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| yp->rx_ring[i].dbdma_cmd = |
| cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz); |
| yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma + |
| ((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc)); |
| } |
| |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz); |
| yp->rx_skbuff[i] = skb; |
| if (skb == NULL) |
| break; |
| skb->dev = dev; /* Mark as being used by this device. */ |
| skb_reserve(skb, 2); /* 16 byte align the IP header. */ |
| yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev, |
| skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE)); |
| } |
| if (i != RX_RING_SIZE) { |
| for (j = 0; j < i; j++) |
| dev_kfree_skb(yp->rx_skbuff[j]); |
| return -ENOMEM; |
| } |
| yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); |
| |
| #define NO_TXSTATS |
| #ifdef NO_TXSTATS |
| /* In this mode the Tx ring needs only a single descriptor. */ |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| yp->tx_skbuff[i] = NULL; |
| yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma + |
| ((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc)); |
| } |
| /* Wrap ring */ |
| yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS); |
| #else |
| { |
| /* Tx ring needs a pair of descriptors, the second for the status. */ |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| j = 2*i; |
| yp->tx_skbuff[i] = 0; |
| /* Branch on Tx error. */ |
| yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma + |
| (j+1)*sizeof(struct yellowfin_desc)); |
| j++; |
| if (yp->flags & FullTxStatus) { |
| yp->tx_ring[j].dbdma_cmd = |
| cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status)); |
| yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status); |
| yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma + |
| i*sizeof(struct tx_status_words)); |
| } else { |
| /* Symbios chips write only tx_errs word. */ |
| yp->tx_ring[j].dbdma_cmd = |
| cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2); |
| yp->tx_ring[j].request_cnt = 2; |
| /* Om pade ummmmm... */ |
| yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma + |
| i*sizeof(struct tx_status_words) + |
| &(yp->tx_status[0].tx_errs) - |
| &(yp->tx_status[0])); |
| } |
| yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma + |
| ((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc)); |
| } |
| /* Wrap ring */ |
| yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS); |
| } |
| #endif |
| yp->tx_tail_desc = &yp->tx_status[0]; |
| return 0; |
| } |
| |
| static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct yellowfin_private *yp = netdev_priv(dev); |
| unsigned entry; |
| int len = skb->len; |
| |
| netif_stop_queue (dev); |
| |
| /* Note: Ordering is important here, set the field with the |
| "ownership" bit last, and only then increment cur_tx. */ |
| |
| /* Calculate the next Tx descriptor entry. */ |
| entry = yp->cur_tx % TX_RING_SIZE; |
| |
| if (gx_fix) { /* Note: only works for paddable protocols e.g. IP. */ |
| int cacheline_end = ((unsigned long)skb->data + skb->len) % 32; |
| /* Fix GX chipset errata. */ |
| if (cacheline_end > 24 || cacheline_end == 0) { |
| len = skb->len + 32 - cacheline_end + 1; |
| if (skb_padto(skb, len)) { |
| yp->tx_skbuff[entry] = NULL; |
| netif_wake_queue(dev); |
| return NETDEV_TX_OK; |
| } |
| } |
| } |
| yp->tx_skbuff[entry] = skb; |
| |
| #ifdef NO_TXSTATS |
| yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev, |
| skb->data, len, PCI_DMA_TODEVICE)); |
| yp->tx_ring[entry].result_status = 0; |
| if (entry >= TX_RING_SIZE-1) { |
| /* New stop command. */ |
| yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd = |
| cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len); |
| } else { |
| yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| yp->tx_ring[entry].dbdma_cmd = |
| cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len); |
| } |
| yp->cur_tx++; |
| #else |
| yp->tx_ring[entry<<1].request_cnt = len; |
| yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev, |
| skb->data, len, PCI_DMA_TODEVICE)); |
| /* The input_last (status-write) command is constant, but we must |
| rewrite the subsequent 'stop' command. */ |
| |
| yp->cur_tx++; |
| { |
| unsigned next_entry = yp->cur_tx % TX_RING_SIZE; |
| yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| } |
| /* Final step -- overwrite the old 'stop' command. */ |
| |
| yp->tx_ring[entry<<1].dbdma_cmd = |
| cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE : |
| CMD_TX_PKT | BRANCH_IFTRUE) | len); |
| #endif |
| |
| /* Non-x86 Todo: explicitly flush cache lines here. */ |
| |
| /* Wake the potentially-idle transmit channel. */ |
| iowrite32(0x10001000, yp->base + TxCtrl); |
| |
| if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE) |
| netif_start_queue (dev); /* Typical path */ |
| else |
| yp->tx_full = 1; |
| |
| if (yellowfin_debug > 4) { |
| netdev_printk(KERN_DEBUG, dev, "Yellowfin transmit frame #%d queued in slot %d\n", |
| yp->cur_tx, entry); |
| } |
| return NETDEV_TX_OK; |
| } |
| |
| /* The interrupt handler does all of the Rx thread work and cleans up |
| after the Tx thread. */ |
| static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance) |
| { |
| struct net_device *dev = dev_instance; |
| struct yellowfin_private *yp; |
| void __iomem *ioaddr; |
| int boguscnt = max_interrupt_work; |
| unsigned int handled = 0; |
| |
| yp = netdev_priv(dev); |
| ioaddr = yp->base; |
| |
| spin_lock (&yp->lock); |
| |
| do { |
| u16 intr_status = ioread16(ioaddr + IntrClear); |
| |
| if (yellowfin_debug > 4) |
| netdev_printk(KERN_DEBUG, dev, "Yellowfin interrupt, status %04x\n", |
| intr_status); |
| |
| if (intr_status == 0) |
| break; |
| handled = 1; |
| |
| if (intr_status & (IntrRxDone | IntrEarlyRx)) { |
| yellowfin_rx(dev); |
| iowrite32(0x10001000, ioaddr + RxCtrl); /* Wake Rx engine. */ |
| } |
| |
| #ifdef NO_TXSTATS |
| for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) { |
| int entry = yp->dirty_tx % TX_RING_SIZE; |
| struct sk_buff *skb; |
| |
| if (yp->tx_ring[entry].result_status == 0) |
| break; |
| skb = yp->tx_skbuff[entry]; |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += skb->len; |
| /* Free the original skb. */ |
| pci_unmap_single(yp->pci_dev, le32_to_cpu(yp->tx_ring[entry].addr), |
| skb->len, PCI_DMA_TODEVICE); |
| dev_kfree_skb_irq(skb); |
| yp->tx_skbuff[entry] = NULL; |
| } |
| if (yp->tx_full && |
| yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) { |
| /* The ring is no longer full, clear tbusy. */ |
| yp->tx_full = 0; |
| netif_wake_queue(dev); |
| } |
| #else |
| if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) { |
| unsigned dirty_tx = yp->dirty_tx; |
| |
| for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0; |
| dirty_tx++) { |
| /* Todo: optimize this. */ |
| int entry = dirty_tx % TX_RING_SIZE; |
| u16 tx_errs = yp->tx_status[entry].tx_errs; |
| struct sk_buff *skb; |
| |
| #ifndef final_version |
| if (yellowfin_debug > 5) |
| netdev_printk(KERN_DEBUG, dev, "Tx queue %d check, Tx status %04x %04x %04x %04x\n", |
| entry, |
| yp->tx_status[entry].tx_cnt, |
| yp->tx_status[entry].tx_errs, |
| yp->tx_status[entry].total_tx_cnt, |
| yp->tx_status[entry].paused); |
| #endif |
| if (tx_errs == 0) |
| break; /* It still hasn't been Txed */ |
| skb = yp->tx_skbuff[entry]; |
| if (tx_errs & 0xF810) { |
| /* There was an major error, log it. */ |
| #ifndef final_version |
| if (yellowfin_debug > 1) |
| netdev_printk(KERN_DEBUG, dev, "Transmit error, Tx status %04x\n", |
| tx_errs); |
| #endif |
| dev->stats.tx_errors++; |
| if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++; |
| if (tx_errs & 0x0800) dev->stats.tx_carrier_errors++; |
| if (tx_errs & 0x2000) dev->stats.tx_window_errors++; |
| if (tx_errs & 0x8000) dev->stats.tx_fifo_errors++; |
| } else { |
| #ifndef final_version |
| if (yellowfin_debug > 4) |
| netdev_printk(KERN_DEBUG, dev, "Normal transmit, Tx status %04x\n", |
| tx_errs); |
| #endif |
| dev->stats.tx_bytes += skb->len; |
| dev->stats.collisions += tx_errs & 15; |
| dev->stats.tx_packets++; |
| } |
| /* Free the original skb. */ |
| pci_unmap_single(yp->pci_dev, |
| yp->tx_ring[entry<<1].addr, skb->len, |
| PCI_DMA_TODEVICE); |
| dev_kfree_skb_irq(skb); |
| yp->tx_skbuff[entry] = 0; |
| /* Mark status as empty. */ |
| yp->tx_status[entry].tx_errs = 0; |
| } |
| |
| #ifndef final_version |
| if (yp->cur_tx - dirty_tx > TX_RING_SIZE) { |
| netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d\n", |
| dirty_tx, yp->cur_tx, yp->tx_full); |
| dirty_tx += TX_RING_SIZE; |
| } |
| #endif |
| |
| if (yp->tx_full && |
| yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) { |
| /* The ring is no longer full, clear tbusy. */ |
| yp->tx_full = 0; |
| netif_wake_queue(dev); |
| } |
| |
| yp->dirty_tx = dirty_tx; |
| yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE]; |
| } |
| #endif |
| |
| /* Log errors and other uncommon events. */ |
| if (intr_status & 0x2ee) /* Abnormal error summary. */ |
| yellowfin_error(dev, intr_status); |
| |
| if (--boguscnt < 0) { |
| netdev_warn(dev, "Too much work at interrupt, status=%#04x\n", |
| intr_status); |
| break; |
| } |
| } while (1); |
| |
| if (yellowfin_debug > 3) |
| netdev_printk(KERN_DEBUG, dev, "exiting interrupt, status=%#04x\n", |
| ioread16(ioaddr + IntrStatus)); |
| |
| spin_unlock (&yp->lock); |
| return IRQ_RETVAL(handled); |
| } |
| |
| /* This routine is logically part of the interrupt handler, but separated |
| for clarity and better register allocation. */ |
| static int yellowfin_rx(struct net_device *dev) |
| { |
| struct yellowfin_private *yp = netdev_priv(dev); |
| int entry = yp->cur_rx % RX_RING_SIZE; |
| int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx; |
| |
| if (yellowfin_debug > 4) { |
| printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %08x\n", |
| entry, yp->rx_ring[entry].result_status); |
| printk(KERN_DEBUG " #%d desc. %08x %08x %08x\n", |
| entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr, |
| yp->rx_ring[entry].result_status); |
| } |
| |
| /* If EOP is set on the next entry, it's a new packet. Send it up. */ |
| while (1) { |
| struct yellowfin_desc *desc = &yp->rx_ring[entry]; |
| struct sk_buff *rx_skb = yp->rx_skbuff[entry]; |
| s16 frame_status; |
| u16 desc_status; |
| int data_size; |
| u8 *buf_addr; |
| |
| if(!desc->result_status) |
| break; |
| pci_dma_sync_single_for_cpu(yp->pci_dev, le32_to_cpu(desc->addr), |
| yp->rx_buf_sz, PCI_DMA_FROMDEVICE); |
| desc_status = le32_to_cpu(desc->result_status) >> 16; |
| buf_addr = rx_skb->data; |
| data_size = (le32_to_cpu(desc->dbdma_cmd) - |
| le32_to_cpu(desc->result_status)) & 0xffff; |
| frame_status = get_unaligned_le16(&(buf_addr[data_size - 2])); |
| if (yellowfin_debug > 4) |
| printk(KERN_DEBUG " %s() status was %04x\n", |
| __func__, frame_status); |
| if (--boguscnt < 0) |
| break; |
| if ( ! (desc_status & RX_EOP)) { |
| if (data_size != 0) |
| netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %04x, data_size %d!\n", |
| desc_status, data_size); |
| dev->stats.rx_length_errors++; |
| } else if ((yp->drv_flags & IsGigabit) && (frame_status & 0x0038)) { |
| /* There was a error. */ |
| if (yellowfin_debug > 3) |
| printk(KERN_DEBUG " %s() Rx error was %04x\n", |
| __func__, frame_status); |
| dev->stats.rx_errors++; |
| if (frame_status & 0x0060) dev->stats.rx_length_errors++; |
| if (frame_status & 0x0008) dev->stats.rx_frame_errors++; |
| if (frame_status & 0x0010) dev->stats.rx_crc_errors++; |
| if (frame_status < 0) dev->stats.rx_dropped++; |
| } else if ( !(yp->drv_flags & IsGigabit) && |
| ((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) { |
| u8 status1 = buf_addr[data_size-2]; |
| u8 status2 = buf_addr[data_size-1]; |
| dev->stats.rx_errors++; |
| if (status1 & 0xC0) dev->stats.rx_length_errors++; |
| if (status2 & 0x03) dev->stats.rx_frame_errors++; |
| if (status2 & 0x04) dev->stats.rx_crc_errors++; |
| if (status2 & 0x80) dev->stats.rx_dropped++; |
| #ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */ |
| } else if ((yp->flags & HasMACAddrBug) && |
| memcmp(le32_to_cpu(yp->rx_ring_dma + |
| entry*sizeof(struct yellowfin_desc)), |
| dev->dev_addr, 6) != 0 && |
| memcmp(le32_to_cpu(yp->rx_ring_dma + |
| entry*sizeof(struct yellowfin_desc)), |
| "\377\377\377\377\377\377", 6) != 0) { |
| if (bogus_rx++ == 0) |
| netdev_warn(dev, "Bad frame to %pM\n", |
| buf_addr); |
| #endif |
| } else { |
| struct sk_buff *skb; |
| int pkt_len = data_size - |
| (yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]); |
| /* To verify: Yellowfin Length should omit the CRC! */ |
| |
| #ifndef final_version |
| if (yellowfin_debug > 4) |
| printk(KERN_DEBUG " %s() normal Rx pkt length %d of %d, bogus_cnt %d\n", |
| __func__, pkt_len, data_size, boguscnt); |
| #endif |
| /* Check if the packet is long enough to just pass up the skbuff |
| without copying to a properly sized skbuff. */ |
| if (pkt_len > rx_copybreak) { |
| skb_put(skb = rx_skb, pkt_len); |
| pci_unmap_single(yp->pci_dev, |
| le32_to_cpu(yp->rx_ring[entry].addr), |
| yp->rx_buf_sz, |
| PCI_DMA_FROMDEVICE); |
| yp->rx_skbuff[entry] = NULL; |
| } else { |
| skb = dev_alloc_skb(pkt_len + 2); |
| if (skb == NULL) |
| break; |
| skb_reserve(skb, 2); /* 16 byte align the IP header */ |
| skb_copy_to_linear_data(skb, rx_skb->data, pkt_len); |
| skb_put(skb, pkt_len); |
| pci_dma_sync_single_for_device(yp->pci_dev, |
| le32_to_cpu(desc->addr), |
| yp->rx_buf_sz, |
| PCI_DMA_FROMDEVICE); |
| } |
| skb->protocol = eth_type_trans(skb, dev); |
| netif_rx(skb); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += pkt_len; |
| } |
| entry = (++yp->cur_rx) % RX_RING_SIZE; |
| } |
| |
| /* Refill the Rx ring buffers. */ |
| for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) { |
| entry = yp->dirty_rx % RX_RING_SIZE; |
| if (yp->rx_skbuff[entry] == NULL) { |
| struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz); |
| if (skb == NULL) |
| break; /* Better luck next round. */ |
| yp->rx_skbuff[entry] = skb; |
| skb->dev = dev; /* Mark as being used by this device. */ |
| skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
| yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev, |
| skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE)); |
| } |
| yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| yp->rx_ring[entry].result_status = 0; /* Clear complete bit. */ |
| if (entry != 0) |
| yp->rx_ring[entry - 1].dbdma_cmd = |
| cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz); |
| else |
| yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd = |
| cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS |
| | yp->rx_buf_sz); |
| } |
| |
| return 0; |
| } |
| |
| static void yellowfin_error(struct net_device *dev, int intr_status) |
| { |
| netdev_err(dev, "Something Wicked happened! %04x\n", intr_status); |
| /* Hmmmmm, it's not clear what to do here. */ |
| if (intr_status & (IntrTxPCIErr | IntrTxPCIFault)) |
| dev->stats.tx_errors++; |
| if (intr_status & (IntrRxPCIErr | IntrRxPCIFault)) |
| dev->stats.rx_errors++; |
| } |
| |
| static int yellowfin_close(struct net_device *dev) |
| { |
| struct yellowfin_private *yp = netdev_priv(dev); |
| void __iomem *ioaddr = yp->base; |
| int i; |
| |
| netif_stop_queue (dev); |
| |
| if (yellowfin_debug > 1) { |
| netdev_printk(KERN_DEBUG, dev, "Shutting down ethercard, status was Tx %04x Rx %04x Int %02x\n", |
| ioread16(ioaddr + TxStatus), |
| ioread16(ioaddr + RxStatus), |
| ioread16(ioaddr + IntrStatus)); |
| netdev_printk(KERN_DEBUG, dev, "Queue pointers were Tx %d / %d, Rx %d / %d\n", |
| yp->cur_tx, yp->dirty_tx, |
| yp->cur_rx, yp->dirty_rx); |
| } |
| |
| /* Disable interrupts by clearing the interrupt mask. */ |
| iowrite16(0x0000, ioaddr + IntrEnb); |
| |
| /* Stop the chip's Tx and Rx processes. */ |
| iowrite32(0x80000000, ioaddr + RxCtrl); |
| iowrite32(0x80000000, ioaddr + TxCtrl); |
| |
| del_timer(&yp->timer); |
| |
| #if defined(__i386__) |
| if (yellowfin_debug > 2) { |
| printk(KERN_DEBUG " Tx ring at %08llx:\n", |
| (unsigned long long)yp->tx_ring_dma); |
| for (i = 0; i < TX_RING_SIZE*2; i++) |
| printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x %08x\n", |
| ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ', |
| i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr, |
| yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status); |
| printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status); |
| for (i = 0; i < TX_RING_SIZE; i++) |
| printk(KERN_DEBUG " #%d status %04x %04x %04x %04x\n", |
| i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs, |
| yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused); |
| |
| printk(KERN_DEBUG " Rx ring %08llx:\n", |
| (unsigned long long)yp->rx_ring_dma); |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x\n", |
| ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ', |
| i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr, |
| yp->rx_ring[i].result_status); |
| if (yellowfin_debug > 6) { |
| if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) { |
| int j; |
| |
| printk(KERN_DEBUG); |
| for (j = 0; j < 0x50; j++) |
| pr_cont(" %04x", |
| get_unaligned(((u16*)yp->rx_ring[i].addr) + j)); |
| pr_cont("\n"); |
| } |
| } |
| } |
| } |
| #endif /* __i386__ debugging only */ |
| |
| free_irq(dev->irq, dev); |
| |
| /* Free all the skbuffs in the Rx queue. */ |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP); |
| yp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ |
| if (yp->rx_skbuff[i]) { |
| dev_kfree_skb(yp->rx_skbuff[i]); |
| } |
| yp->rx_skbuff[i] = NULL; |
| } |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| if (yp->tx_skbuff[i]) |
| dev_kfree_skb(yp->tx_skbuff[i]); |
| yp->tx_skbuff[i] = NULL; |
| } |
| |
| #ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */ |
| if (yellowfin_debug > 0) { |
| netdev_printk(KERN_DEBUG, dev, "Received %d frames that we should not have\n", |
| bogus_rx); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| /* Set or clear the multicast filter for this adaptor. */ |
| |
| static void set_rx_mode(struct net_device *dev) |
| { |
| struct yellowfin_private *yp = netdev_priv(dev); |
| void __iomem *ioaddr = yp->base; |
| u16 cfg_value = ioread16(ioaddr + Cnfg); |
| |
| /* Stop the Rx process to change any value. */ |
| iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg); |
| if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ |
| iowrite16(0x000F, ioaddr + AddrMode); |
| } else if ((netdev_mc_count(dev) > 64) || |
| (dev->flags & IFF_ALLMULTI)) { |
| /* Too many to filter well, or accept all multicasts. */ |
| iowrite16(0x000B, ioaddr + AddrMode); |
| } else if (!netdev_mc_empty(dev)) { /* Must use the multicast hash table. */ |
| struct netdev_hw_addr *ha; |
| u16 hash_table[4]; |
| int i; |
| |
| memset(hash_table, 0, sizeof(hash_table)); |
| netdev_for_each_mc_addr(ha, dev) { |
| unsigned int bit; |
| |
| /* Due to a bug in the early chip versions, multiple filter |
| slots must be set for each address. */ |
| if (yp->drv_flags & HasMulticastBug) { |
| bit = (ether_crc_le(3, ha->addr) >> 3) & 0x3f; |
| hash_table[bit >> 4] |= (1 << bit); |
| bit = (ether_crc_le(4, ha->addr) >> 3) & 0x3f; |
| hash_table[bit >> 4] |= (1 << bit); |
| bit = (ether_crc_le(5, ha->addr) >> 3) & 0x3f; |
| hash_table[bit >> 4] |= (1 << bit); |
| } |
| bit = (ether_crc_le(6, ha->addr) >> 3) & 0x3f; |
| hash_table[bit >> 4] |= (1 << bit); |
| } |
| /* Copy the hash table to the chip. */ |
| for (i = 0; i < 4; i++) |
| iowrite16(hash_table[i], ioaddr + HashTbl + i*2); |
| iowrite16(0x0003, ioaddr + AddrMode); |
| } else { /* Normal, unicast/broadcast-only mode. */ |
| iowrite16(0x0001, ioaddr + AddrMode); |
| } |
| /* Restart the Rx process. */ |
| iowrite16(cfg_value | 0x1000, ioaddr + Cnfg); |
| } |
| |
| static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| struct yellowfin_private *np = netdev_priv(dev); |
| strcpy(info->driver, DRV_NAME); |
| strcpy(info->version, DRV_VERSION); |
| strcpy(info->bus_info, pci_name(np->pci_dev)); |
| } |
| |
| static const struct ethtool_ops ethtool_ops = { |
| .get_drvinfo = yellowfin_get_drvinfo |
| }; |
| |
| static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| struct yellowfin_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| struct mii_ioctl_data *data = if_mii(rq); |
| |
| switch(cmd) { |
| case SIOCGMIIPHY: /* Get address of MII PHY in use. */ |
| data->phy_id = np->phys[0] & 0x1f; |
| /* Fall Through */ |
| |
| case SIOCGMIIREG: /* Read MII PHY register. */ |
| data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f); |
| return 0; |
| |
| case SIOCSMIIREG: /* Write MII PHY register. */ |
| if (data->phy_id == np->phys[0]) { |
| u16 value = data->val_in; |
| switch (data->reg_num) { |
| case 0: |
| /* Check for autonegotiation on or reset. */ |
| np->medialock = (value & 0x9000) ? 0 : 1; |
| if (np->medialock) |
| np->full_duplex = (value & 0x0100) ? 1 : 0; |
| break; |
| case 4: np->advertising = value; break; |
| } |
| /* Perhaps check_duplex(dev), depending on chip semantics. */ |
| } |
| mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| |
| static void __devexit yellowfin_remove_one (struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct yellowfin_private *np; |
| |
| BUG_ON(!dev); |
| np = netdev_priv(dev); |
| |
| pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status, |
| np->tx_status_dma); |
| pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); |
| pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); |
| unregister_netdev (dev); |
| |
| pci_iounmap(pdev, np->base); |
| |
| pci_release_regions (pdev); |
| |
| free_netdev (dev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| |
| static struct pci_driver yellowfin_driver = { |
| .name = DRV_NAME, |
| .id_table = yellowfin_pci_tbl, |
| .probe = yellowfin_init_one, |
| .remove = __devexit_p(yellowfin_remove_one), |
| }; |
| |
| |
| static int __init yellowfin_init (void) |
| { |
| /* when a module, this is printed whether or not devices are found in probe */ |
| #ifdef MODULE |
| printk(version); |
| #endif |
| return pci_register_driver(&yellowfin_driver); |
| } |
| |
| |
| static void __exit yellowfin_cleanup (void) |
| { |
| pci_unregister_driver (&yellowfin_driver); |
| } |
| |
| |
| module_init(yellowfin_init); |
| module_exit(yellowfin_cleanup); |