mac80211: split off channel switch parsing function
The channel switch parsing function can be re-used for the IBSS code,
put the common part into an extra function.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[also move/rename chandef_downgrade]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c
index 578eea3..921597e 100644
--- a/net/mac80211/spectmgmt.c
+++ b/net/mac80211/spectmgmt.c
@@ -21,6 +21,168 @@
#include "sta_info.h"
#include "wme.h"
+int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
+ struct ieee802_11_elems *elems, bool beacon,
+ enum ieee80211_band current_band,
+ u32 sta_flags, u8 *bssid, u8 *count, u8 *mode,
+ struct cfg80211_chan_def *new_chandef)
+{
+ enum ieee80211_band new_band;
+ int new_freq;
+ u8 new_chan_no;
+ struct ieee80211_channel *new_chan;
+ struct cfg80211_chan_def new_vht_chandef = {};
+ const struct ieee80211_sec_chan_offs_ie *sec_chan_offs;
+ const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie;
+ const struct ieee80211_ht_operation *ht_oper;
+ int secondary_channel_offset = -1;
+
+ sec_chan_offs = elems->sec_chan_offs;
+ wide_bw_chansw_ie = elems->wide_bw_chansw_ie;
+ ht_oper = elems->ht_operation;
+
+ if (sta_flags & (IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_40MHZ)) {
+ sec_chan_offs = NULL;
+ wide_bw_chansw_ie = NULL;
+ /* only used for bandwidth here */
+ ht_oper = NULL;
+ }
+
+ if (sta_flags & IEEE80211_STA_DISABLE_VHT)
+ wide_bw_chansw_ie = NULL;
+
+ if (elems->ext_chansw_ie) {
+ if (!ieee80211_operating_class_to_band(
+ elems->ext_chansw_ie->new_operating_class,
+ &new_band)) {
+ sdata_info(sdata,
+ "cannot understand ECSA IE operating class %d, disconnecting\n",
+ elems->ext_chansw_ie->new_operating_class);
+ return -EINVAL;
+ }
+ new_chan_no = elems->ext_chansw_ie->new_ch_num;
+ *count = elems->ext_chansw_ie->count;
+ *mode = elems->ext_chansw_ie->mode;
+ } else if (elems->ch_switch_ie) {
+ new_band = current_band;
+ new_chan_no = elems->ch_switch_ie->new_ch_num;
+ *count = elems->ch_switch_ie->count;
+ *mode = elems->ch_switch_ie->mode;
+ } else {
+ /* nothing here we understand */
+ return 1;
+ }
+
+ new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band);
+ new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
+ if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) {
+ sdata_info(sdata,
+ "BSS %pM switches to unsupported channel (%d MHz), disconnecting\n",
+ bssid, new_freq);
+ return -EINVAL;
+ }
+
+ if (!beacon && sec_chan_offs) {
+ secondary_channel_offset = sec_chan_offs->sec_chan_offs;
+ } else if (beacon && ht_oper) {
+ secondary_channel_offset =
+ ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
+ } else if (!(sta_flags & IEEE80211_STA_DISABLE_HT)) {
+ /* If it's not a beacon, HT is enabled and the IE not present,
+ * it's 20 MHz, 802.11-2012 8.5.2.6:
+ * This element [the Secondary Channel Offset Element] is
+ * present when switching to a 40 MHz channel. It may be
+ * present when switching to a 20 MHz channel (in which
+ * case the secondary channel offset is set to SCN).
+ */
+ secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ }
+
+ switch (secondary_channel_offset) {
+ default:
+ /* secondary_channel_offset was present but is invalid */
+ case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_HT20);
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_HT40PLUS);
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_HT40MINUS);
+ break;
+ case -1:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_NO_HT);
+ /* keep width for 5/10 MHz channels */
+ switch (sdata->vif.bss_conf.chandef.width) {
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ new_chandef->width = sdata->vif.bss_conf.chandef.width;
+ break;
+ default:
+ break;
+ }
+ break;
+ }
+
+ if (wide_bw_chansw_ie) {
+ new_vht_chandef.chan = new_chan;
+ new_vht_chandef.center_freq1 =
+ ieee80211_channel_to_frequency(
+ wide_bw_chansw_ie->new_center_freq_seg0,
+ new_band);
+
+ switch (wide_bw_chansw_ie->new_channel_width) {
+ default:
+ /* hmmm, ignore VHT and use HT if present */
+ case IEEE80211_VHT_CHANWIDTH_USE_HT:
+ new_vht_chandef.chan = NULL;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80MHZ:
+ new_vht_chandef.width = NL80211_CHAN_WIDTH_80;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_160MHZ:
+ new_vht_chandef.width = NL80211_CHAN_WIDTH_160;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
+ /* field is otherwise reserved */
+ new_vht_chandef.center_freq2 =
+ ieee80211_channel_to_frequency(
+ wide_bw_chansw_ie->new_center_freq_seg1,
+ new_band);
+ new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
+ break;
+ }
+ if (sta_flags & IEEE80211_STA_DISABLE_80P80MHZ &&
+ new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80)
+ ieee80211_chandef_downgrade(&new_vht_chandef);
+ if (sta_flags & IEEE80211_STA_DISABLE_160MHZ &&
+ new_vht_chandef.width == NL80211_CHAN_WIDTH_160)
+ ieee80211_chandef_downgrade(&new_vht_chandef);
+ if (sta_flags & IEEE80211_STA_DISABLE_40MHZ &&
+ new_vht_chandef.width > NL80211_CHAN_WIDTH_20)
+ ieee80211_chandef_downgrade(&new_vht_chandef);
+ }
+
+ /* if VHT data is there validate & use it */
+ if (new_vht_chandef.chan) {
+ if (!cfg80211_chandef_compatible(&new_vht_chandef,
+ new_chandef)) {
+ sdata_info(sdata,
+ "BSS %pM: CSA has inconsistent channel data, disconnecting\n",
+ bssid);
+ return -EINVAL;
+ }
+ *new_chandef = new_vht_chandef;
+ }
+
+ return 0;
+}
+
static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata,
struct ieee80211_msrment_ie *request_ie,
const u8 *da, const u8 *bssid,