| /* |
| * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> |
| * Copyright (c) 2007-2008 Intel Corporation |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| #ifndef __INTEL_DRV_H__ |
| #define __INTEL_DRV_H__ |
| |
| #include <linux/async.h> |
| #include <linux/i2c.h> |
| #include <linux/hdmi.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_dp_mst_helper.h> |
| #include <drm/drm_rect.h> |
| |
| #define DIV_ROUND_CLOSEST_ULL(ll, d) \ |
| ({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; }) |
| |
| /** |
| * _wait_for - magic (register) wait macro |
| * |
| * Does the right thing for modeset paths when run under kdgb or similar atomic |
| * contexts. Note that it's important that we check the condition again after |
| * having timed out, since the timeout could be due to preemption or similar and |
| * we've never had a chance to check the condition before the timeout. |
| */ |
| #define _wait_for(COND, MS, W) ({ \ |
| unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \ |
| int ret__ = 0; \ |
| while (!(COND)) { \ |
| if (time_after(jiffies, timeout__)) { \ |
| if (!(COND)) \ |
| ret__ = -ETIMEDOUT; \ |
| break; \ |
| } \ |
| if (W && drm_can_sleep()) { \ |
| msleep(W); \ |
| } else { \ |
| cpu_relax(); \ |
| } \ |
| } \ |
| ret__; \ |
| }) |
| |
| #define wait_for(COND, MS) _wait_for(COND, MS, 1) |
| #define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0) |
| #define wait_for_atomic_us(COND, US) _wait_for((COND), \ |
| DIV_ROUND_UP((US), 1000), 0) |
| |
| #define KHz(x) (1000 * (x)) |
| #define MHz(x) KHz(1000 * (x)) |
| |
| /* |
| * Display related stuff |
| */ |
| |
| /* store information about an Ixxx DVO */ |
| /* The i830->i865 use multiple DVOs with multiple i2cs */ |
| /* the i915, i945 have a single sDVO i2c bus - which is different */ |
| #define MAX_OUTPUTS 6 |
| /* maximum connectors per crtcs in the mode set */ |
| |
| /* Maximum cursor sizes */ |
| #define GEN2_CURSOR_WIDTH 64 |
| #define GEN2_CURSOR_HEIGHT 64 |
| #define MAX_CURSOR_WIDTH 256 |
| #define MAX_CURSOR_HEIGHT 256 |
| |
| #define INTEL_I2C_BUS_DVO 1 |
| #define INTEL_I2C_BUS_SDVO 2 |
| |
| /* these are outputs from the chip - integrated only |
| external chips are via DVO or SDVO output */ |
| enum intel_output_type { |
| INTEL_OUTPUT_UNUSED = 0, |
| INTEL_OUTPUT_ANALOG = 1, |
| INTEL_OUTPUT_DVO = 2, |
| INTEL_OUTPUT_SDVO = 3, |
| INTEL_OUTPUT_LVDS = 4, |
| INTEL_OUTPUT_TVOUT = 5, |
| INTEL_OUTPUT_HDMI = 6, |
| INTEL_OUTPUT_DISPLAYPORT = 7, |
| INTEL_OUTPUT_EDP = 8, |
| INTEL_OUTPUT_DSI = 9, |
| INTEL_OUTPUT_UNKNOWN = 10, |
| INTEL_OUTPUT_DP_MST = 11, |
| }; |
| |
| #define INTEL_DVO_CHIP_NONE 0 |
| #define INTEL_DVO_CHIP_LVDS 1 |
| #define INTEL_DVO_CHIP_TMDS 2 |
| #define INTEL_DVO_CHIP_TVOUT 4 |
| |
| #define INTEL_DSI_VIDEO_MODE 0 |
| #define INTEL_DSI_COMMAND_MODE 1 |
| |
| struct intel_framebuffer { |
| struct drm_framebuffer base; |
| struct drm_i915_gem_object *obj; |
| }; |
| |
| struct intel_fbdev { |
| struct drm_fb_helper helper; |
| struct intel_framebuffer *fb; |
| struct list_head fbdev_list; |
| struct drm_display_mode *our_mode; |
| int preferred_bpp; |
| }; |
| |
| struct intel_encoder { |
| struct drm_encoder base; |
| /* |
| * The new crtc this encoder will be driven from. Only differs from |
| * base->crtc while a modeset is in progress. |
| */ |
| struct intel_crtc *new_crtc; |
| |
| enum intel_output_type type; |
| unsigned int cloneable; |
| bool connectors_active; |
| void (*hot_plug)(struct intel_encoder *); |
| bool (*compute_config)(struct intel_encoder *, |
| struct intel_crtc_config *); |
| void (*pre_pll_enable)(struct intel_encoder *); |
| void (*pre_enable)(struct intel_encoder *); |
| void (*enable)(struct intel_encoder *); |
| void (*mode_set)(struct intel_encoder *intel_encoder); |
| void (*disable)(struct intel_encoder *); |
| void (*post_disable)(struct intel_encoder *); |
| /* Read out the current hw state of this connector, returning true if |
| * the encoder is active. If the encoder is enabled it also set the pipe |
| * it is connected to in the pipe parameter. */ |
| bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe); |
| /* Reconstructs the equivalent mode flags for the current hardware |
| * state. This must be called _after_ display->get_pipe_config has |
| * pre-filled the pipe config. Note that intel_encoder->base.crtc must |
| * be set correctly before calling this function. */ |
| void (*get_config)(struct intel_encoder *, |
| struct intel_crtc_config *pipe_config); |
| /* |
| * Called during system suspend after all pending requests for the |
| * encoder are flushed (for example for DP AUX transactions) and |
| * device interrupts are disabled. |
| */ |
| void (*suspend)(struct intel_encoder *); |
| int crtc_mask; |
| enum hpd_pin hpd_pin; |
| }; |
| |
| struct intel_panel { |
| struct drm_display_mode *fixed_mode; |
| struct drm_display_mode *downclock_mode; |
| int fitting_mode; |
| |
| /* backlight */ |
| struct { |
| bool present; |
| u32 level; |
| u32 min; |
| u32 max; |
| bool enabled; |
| bool combination_mode; /* gen 2/4 only */ |
| bool active_low_pwm; |
| struct backlight_device *device; |
| } backlight; |
| |
| void (*backlight_power)(struct intel_connector *, bool enable); |
| }; |
| |
| struct intel_connector { |
| struct drm_connector base; |
| /* |
| * The fixed encoder this connector is connected to. |
| */ |
| struct intel_encoder *encoder; |
| |
| /* |
| * The new encoder this connector will be driven. Only differs from |
| * encoder while a modeset is in progress. |
| */ |
| struct intel_encoder *new_encoder; |
| |
| /* Reads out the current hw, returning true if the connector is enabled |
| * and active (i.e. dpms ON state). */ |
| bool (*get_hw_state)(struct intel_connector *); |
| |
| /* |
| * Removes all interfaces through which the connector is accessible |
| * - like sysfs, debugfs entries -, so that no new operations can be |
| * started on the connector. Also makes sure all currently pending |
| * operations finish before returing. |
| */ |
| void (*unregister)(struct intel_connector *); |
| |
| /* Panel info for eDP and LVDS */ |
| struct intel_panel panel; |
| |
| /* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */ |
| struct edid *edid; |
| struct edid *detect_edid; |
| |
| /* since POLL and HPD connectors may use the same HPD line keep the native |
| state of connector->polled in case hotplug storm detection changes it */ |
| u8 polled; |
| |
| void *port; /* store this opaque as its illegal to dereference it */ |
| |
| struct intel_dp *mst_port; |
| }; |
| |
| typedef struct dpll { |
| /* given values */ |
| int n; |
| int m1, m2; |
| int p1, p2; |
| /* derived values */ |
| int dot; |
| int vco; |
| int m; |
| int p; |
| } intel_clock_t; |
| |
| struct intel_plane_state { |
| struct drm_crtc *crtc; |
| struct drm_framebuffer *fb; |
| struct drm_rect src; |
| struct drm_rect dst; |
| struct drm_rect clip; |
| struct drm_rect orig_src; |
| struct drm_rect orig_dst; |
| bool visible; |
| }; |
| |
| struct intel_plane_config { |
| bool tiled; |
| int size; |
| u32 base; |
| }; |
| |
| struct intel_crtc_config { |
| /** |
| * quirks - bitfield with hw state readout quirks |
| * |
| * For various reasons the hw state readout code might not be able to |
| * completely faithfully read out the current state. These cases are |
| * tracked with quirk flags so that fastboot and state checker can act |
| * accordingly. |
| */ |
| #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */ |
| #define PIPE_CONFIG_QUIRK_INHERITED_MODE (1<<1) /* mode inherited from firmware */ |
| unsigned long quirks; |
| |
| /* User requested mode, only valid as a starting point to |
| * compute adjusted_mode, except in the case of (S)DVO where |
| * it's also for the output timings of the (S)DVO chip. |
| * adjusted_mode will then correspond to the S(DVO) chip's |
| * preferred input timings. */ |
| struct drm_display_mode requested_mode; |
| /* Actual pipe timings ie. what we program into the pipe timing |
| * registers. adjusted_mode.crtc_clock is the pipe pixel clock. */ |
| struct drm_display_mode adjusted_mode; |
| |
| /* Pipe source size (ie. panel fitter input size) |
| * All planes will be positioned inside this space, |
| * and get clipped at the edges. */ |
| int pipe_src_w, pipe_src_h; |
| |
| /* Whether to set up the PCH/FDI. Note that we never allow sharing |
| * between pch encoders and cpu encoders. */ |
| bool has_pch_encoder; |
| |
| /* Are we sending infoframes on the attached port */ |
| bool has_infoframe; |
| |
| /* CPU Transcoder for the pipe. Currently this can only differ from the |
| * pipe on Haswell (where we have a special eDP transcoder). */ |
| enum transcoder cpu_transcoder; |
| |
| /* |
| * Use reduced/limited/broadcast rbg range, compressing from the full |
| * range fed into the crtcs. |
| */ |
| bool limited_color_range; |
| |
| /* DP has a bunch of special case unfortunately, so mark the pipe |
| * accordingly. */ |
| bool has_dp_encoder; |
| |
| /* Whether we should send NULL infoframes. Required for audio. */ |
| bool has_hdmi_sink; |
| |
| /* Audio enabled on this pipe. Only valid if either has_hdmi_sink or |
| * has_dp_encoder is set. */ |
| bool has_audio; |
| |
| /* |
| * Enable dithering, used when the selected pipe bpp doesn't match the |
| * plane bpp. |
| */ |
| bool dither; |
| |
| /* Controls for the clock computation, to override various stages. */ |
| bool clock_set; |
| |
| /* SDVO TV has a bunch of special case. To make multifunction encoders |
| * work correctly, we need to track this at runtime.*/ |
| bool sdvo_tv_clock; |
| |
| /* |
| * crtc bandwidth limit, don't increase pipe bpp or clock if not really |
| * required. This is set in the 2nd loop of calling encoder's |
| * ->compute_config if the first pick doesn't work out. |
| */ |
| bool bw_constrained; |
| |
| /* Settings for the intel dpll used on pretty much everything but |
| * haswell. */ |
| struct dpll dpll; |
| |
| /* Selected dpll when shared or DPLL_ID_PRIVATE. */ |
| enum intel_dpll_id shared_dpll; |
| |
| /* |
| * - PORT_CLK_SEL for DDI ports on HSW/BDW. |
| * - enum skl_dpll on SKL |
| */ |
| uint32_t ddi_pll_sel; |
| |
| /* Actual register state of the dpll, for shared dpll cross-checking. */ |
| struct intel_dpll_hw_state dpll_hw_state; |
| |
| int pipe_bpp; |
| struct intel_link_m_n dp_m_n; |
| |
| /* m2_n2 for eDP downclock */ |
| struct intel_link_m_n dp_m2_n2; |
| bool has_drrs; |
| |
| /* |
| * Frequence the dpll for the port should run at. Differs from the |
| * adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also |
| * already multiplied by pixel_multiplier. |
| */ |
| int port_clock; |
| |
| /* Used by SDVO (and if we ever fix it, HDMI). */ |
| unsigned pixel_multiplier; |
| |
| /* Panel fitter controls for gen2-gen4 + VLV */ |
| struct { |
| u32 control; |
| u32 pgm_ratios; |
| u32 lvds_border_bits; |
| } gmch_pfit; |
| |
| /* Panel fitter placement and size for Ironlake+ */ |
| struct { |
| u32 pos; |
| u32 size; |
| bool enabled; |
| bool force_thru; |
| } pch_pfit; |
| |
| /* FDI configuration, only valid if has_pch_encoder is set. */ |
| int fdi_lanes; |
| struct intel_link_m_n fdi_m_n; |
| |
| bool ips_enabled; |
| |
| bool double_wide; |
| |
| bool dp_encoder_is_mst; |
| int pbn; |
| }; |
| |
| struct intel_pipe_wm { |
| struct intel_wm_level wm[5]; |
| uint32_t linetime; |
| bool fbc_wm_enabled; |
| bool pipe_enabled; |
| bool sprites_enabled; |
| bool sprites_scaled; |
| }; |
| |
| struct intel_mmio_flip { |
| u32 seqno; |
| struct intel_engine_cs *ring; |
| struct work_struct work; |
| }; |
| |
| struct skl_pipe_wm { |
| struct skl_wm_level wm[8]; |
| struct skl_wm_level trans_wm; |
| uint32_t linetime; |
| }; |
| |
| struct intel_crtc { |
| struct drm_crtc base; |
| enum pipe pipe; |
| enum plane plane; |
| u8 lut_r[256], lut_g[256], lut_b[256]; |
| /* |
| * Whether the crtc and the connected output pipeline is active. Implies |
| * that crtc->enabled is set, i.e. the current mode configuration has |
| * some outputs connected to this crtc. |
| */ |
| bool active; |
| unsigned long enabled_power_domains; |
| bool primary_enabled; /* is the primary plane (partially) visible? */ |
| bool lowfreq_avail; |
| struct intel_overlay *overlay; |
| struct intel_unpin_work *unpin_work; |
| |
| atomic_t unpin_work_count; |
| |
| /* Display surface base address adjustement for pageflips. Note that on |
| * gen4+ this only adjusts up to a tile, offsets within a tile are |
| * handled in the hw itself (with the TILEOFF register). */ |
| unsigned long dspaddr_offset; |
| |
| struct drm_i915_gem_object *cursor_bo; |
| uint32_t cursor_addr; |
| int16_t cursor_width, cursor_height; |
| uint32_t cursor_cntl; |
| uint32_t cursor_size; |
| uint32_t cursor_base; |
| |
| struct intel_plane_config plane_config; |
| struct intel_crtc_config config; |
| struct intel_crtc_config *new_config; |
| bool new_enabled; |
| |
| /* reset counter value when the last flip was submitted */ |
| unsigned int reset_counter; |
| |
| /* Access to these should be protected by dev_priv->irq_lock. */ |
| bool cpu_fifo_underrun_disabled; |
| bool pch_fifo_underrun_disabled; |
| |
| /* per-pipe watermark state */ |
| struct { |
| /* watermarks currently being used */ |
| struct intel_pipe_wm active; |
| /* SKL wm values currently in use */ |
| struct skl_pipe_wm skl_active; |
| } wm; |
| |
| int scanline_offset; |
| struct intel_mmio_flip mmio_flip; |
| }; |
| |
| struct intel_plane_wm_parameters { |
| uint32_t horiz_pixels; |
| uint32_t vert_pixels; |
| uint8_t bytes_per_pixel; |
| bool enabled; |
| bool scaled; |
| }; |
| |
| struct intel_plane { |
| struct drm_plane base; |
| int plane; |
| enum pipe pipe; |
| struct drm_i915_gem_object *obj; |
| bool can_scale; |
| int max_downscale; |
| int crtc_x, crtc_y; |
| unsigned int crtc_w, crtc_h; |
| uint32_t src_x, src_y; |
| uint32_t src_w, src_h; |
| unsigned int rotation; |
| |
| /* Since we need to change the watermarks before/after |
| * enabling/disabling the planes, we need to store the parameters here |
| * as the other pieces of the struct may not reflect the values we want |
| * for the watermark calculations. Currently only Haswell uses this. |
| */ |
| struct intel_plane_wm_parameters wm; |
| |
| void (*update_plane)(struct drm_plane *plane, |
| struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_i915_gem_object *obj, |
| int crtc_x, int crtc_y, |
| unsigned int crtc_w, unsigned int crtc_h, |
| uint32_t x, uint32_t y, |
| uint32_t src_w, uint32_t src_h); |
| void (*disable_plane)(struct drm_plane *plane, |
| struct drm_crtc *crtc); |
| int (*update_colorkey)(struct drm_plane *plane, |
| struct drm_intel_sprite_colorkey *key); |
| void (*get_colorkey)(struct drm_plane *plane, |
| struct drm_intel_sprite_colorkey *key); |
| }; |
| |
| struct intel_watermark_params { |
| unsigned long fifo_size; |
| unsigned long max_wm; |
| unsigned long default_wm; |
| unsigned long guard_size; |
| unsigned long cacheline_size; |
| }; |
| |
| struct cxsr_latency { |
| int is_desktop; |
| int is_ddr3; |
| unsigned long fsb_freq; |
| unsigned long mem_freq; |
| unsigned long display_sr; |
| unsigned long display_hpll_disable; |
| unsigned long cursor_sr; |
| unsigned long cursor_hpll_disable; |
| }; |
| |
| #define to_intel_crtc(x) container_of(x, struct intel_crtc, base) |
| #define to_intel_connector(x) container_of(x, struct intel_connector, base) |
| #define to_intel_encoder(x) container_of(x, struct intel_encoder, base) |
| #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base) |
| #define to_intel_plane(x) container_of(x, struct intel_plane, base) |
| #define intel_fb_obj(x) (x ? to_intel_framebuffer(x)->obj : NULL) |
| |
| struct intel_hdmi { |
| u32 hdmi_reg; |
| int ddc_bus; |
| uint32_t color_range; |
| bool color_range_auto; |
| bool has_hdmi_sink; |
| bool has_audio; |
| enum hdmi_force_audio force_audio; |
| bool rgb_quant_range_selectable; |
| enum hdmi_picture_aspect aspect_ratio; |
| void (*write_infoframe)(struct drm_encoder *encoder, |
| enum hdmi_infoframe_type type, |
| const void *frame, ssize_t len); |
| void (*set_infoframes)(struct drm_encoder *encoder, |
| bool enable, |
| struct drm_display_mode *adjusted_mode); |
| bool (*infoframe_enabled)(struct drm_encoder *encoder); |
| }; |
| |
| struct intel_dp_mst_encoder; |
| #define DP_MAX_DOWNSTREAM_PORTS 0x10 |
| |
| /** |
| * HIGH_RR is the highest eDP panel refresh rate read from EDID |
| * LOW_RR is the lowest eDP panel refresh rate found from EDID |
| * parsing for same resolution. |
| */ |
| enum edp_drrs_refresh_rate_type { |
| DRRS_HIGH_RR, |
| DRRS_LOW_RR, |
| DRRS_MAX_RR, /* RR count */ |
| }; |
| |
| struct intel_dp { |
| uint32_t output_reg; |
| uint32_t aux_ch_ctl_reg; |
| uint32_t DP; |
| bool has_audio; |
| enum hdmi_force_audio force_audio; |
| uint32_t color_range; |
| bool color_range_auto; |
| uint8_t link_bw; |
| uint8_t lane_count; |
| uint8_t dpcd[DP_RECEIVER_CAP_SIZE]; |
| uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE]; |
| uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS]; |
| struct drm_dp_aux aux; |
| uint8_t train_set[4]; |
| int panel_power_up_delay; |
| int panel_power_down_delay; |
| int panel_power_cycle_delay; |
| int backlight_on_delay; |
| int backlight_off_delay; |
| struct delayed_work panel_vdd_work; |
| bool want_panel_vdd; |
| unsigned long last_power_cycle; |
| unsigned long last_power_on; |
| unsigned long last_backlight_off; |
| |
| struct notifier_block edp_notifier; |
| |
| /* |
| * Pipe whose power sequencer is currently locked into |
| * this port. Only relevant on VLV/CHV. |
| */ |
| enum pipe pps_pipe; |
| struct edp_power_seq pps_delays; |
| |
| bool use_tps3; |
| bool can_mst; /* this port supports mst */ |
| bool is_mst; |
| int active_mst_links; |
| /* connector directly attached - won't be use for modeset in mst world */ |
| struct intel_connector *attached_connector; |
| |
| /* mst connector list */ |
| struct intel_dp_mst_encoder *mst_encoders[I915_MAX_PIPES]; |
| struct drm_dp_mst_topology_mgr mst_mgr; |
| |
| uint32_t (*get_aux_clock_divider)(struct intel_dp *dp, int index); |
| /* |
| * This function returns the value we have to program the AUX_CTL |
| * register with to kick off an AUX transaction. |
| */ |
| uint32_t (*get_aux_send_ctl)(struct intel_dp *dp, |
| bool has_aux_irq, |
| int send_bytes, |
| uint32_t aux_clock_divider); |
| struct { |
| enum drrs_support_type type; |
| enum edp_drrs_refresh_rate_type refresh_rate_type; |
| struct mutex mutex; |
| } drrs_state; |
| |
| }; |
| |
| struct intel_digital_port { |
| struct intel_encoder base; |
| enum port port; |
| u32 saved_port_bits; |
| struct intel_dp dp; |
| struct intel_hdmi hdmi; |
| bool (*hpd_pulse)(struct intel_digital_port *, bool); |
| }; |
| |
| struct intel_dp_mst_encoder { |
| struct intel_encoder base; |
| enum pipe pipe; |
| struct intel_digital_port *primary; |
| void *port; /* store this opaque as its illegal to dereference it */ |
| }; |
| |
| static inline int |
| vlv_dport_to_channel(struct intel_digital_port *dport) |
| { |
| switch (dport->port) { |
| case PORT_B: |
| case PORT_D: |
| return DPIO_CH0; |
| case PORT_C: |
| return DPIO_CH1; |
| default: |
| BUG(); |
| } |
| } |
| |
| static inline int |
| vlv_pipe_to_channel(enum pipe pipe) |
| { |
| switch (pipe) { |
| case PIPE_A: |
| case PIPE_C: |
| return DPIO_CH0; |
| case PIPE_B: |
| return DPIO_CH1; |
| default: |
| BUG(); |
| } |
| } |
| |
| static inline struct drm_crtc * |
| intel_get_crtc_for_pipe(struct drm_device *dev, int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| return dev_priv->pipe_to_crtc_mapping[pipe]; |
| } |
| |
| static inline struct drm_crtc * |
| intel_get_crtc_for_plane(struct drm_device *dev, int plane) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| return dev_priv->plane_to_crtc_mapping[plane]; |
| } |
| |
| struct intel_unpin_work { |
| struct work_struct work; |
| struct drm_crtc *crtc; |
| struct drm_i915_gem_object *old_fb_obj; |
| struct drm_i915_gem_object *pending_flip_obj; |
| struct drm_pending_vblank_event *event; |
| atomic_t pending; |
| #define INTEL_FLIP_INACTIVE 0 |
| #define INTEL_FLIP_PENDING 1 |
| #define INTEL_FLIP_COMPLETE 2 |
| u32 flip_count; |
| u32 gtt_offset; |
| struct intel_engine_cs *flip_queued_ring; |
| u32 flip_queued_seqno; |
| int flip_queued_vblank; |
| int flip_ready_vblank; |
| bool enable_stall_check; |
| }; |
| |
| struct intel_set_config { |
| struct drm_encoder **save_connector_encoders; |
| struct drm_crtc **save_encoder_crtcs; |
| bool *save_crtc_enabled; |
| |
| bool fb_changed; |
| bool mode_changed; |
| }; |
| |
| struct intel_load_detect_pipe { |
| struct drm_framebuffer *release_fb; |
| bool load_detect_temp; |
| int dpms_mode; |
| }; |
| |
| static inline struct intel_encoder * |
| intel_attached_encoder(struct drm_connector *connector) |
| { |
| return to_intel_connector(connector)->encoder; |
| } |
| |
| static inline struct intel_digital_port * |
| enc_to_dig_port(struct drm_encoder *encoder) |
| { |
| return container_of(encoder, struct intel_digital_port, base.base); |
| } |
| |
| static inline struct intel_dp_mst_encoder * |
| enc_to_mst(struct drm_encoder *encoder) |
| { |
| return container_of(encoder, struct intel_dp_mst_encoder, base.base); |
| } |
| |
| static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder) |
| { |
| return &enc_to_dig_port(encoder)->dp; |
| } |
| |
| static inline struct intel_digital_port * |
| dp_to_dig_port(struct intel_dp *intel_dp) |
| { |
| return container_of(intel_dp, struct intel_digital_port, dp); |
| } |
| |
| static inline struct intel_digital_port * |
| hdmi_to_dig_port(struct intel_hdmi *intel_hdmi) |
| { |
| return container_of(intel_hdmi, struct intel_digital_port, hdmi); |
| } |
| |
| /* |
| * Returns the number of planes for this pipe, ie the number of sprites + 1 |
| * (primary plane). This doesn't count the cursor plane then. |
| */ |
| static inline unsigned int intel_num_planes(struct intel_crtc *crtc) |
| { |
| return INTEL_INFO(crtc->base.dev)->num_sprites[crtc->pipe] + 1; |
| } |
| |
| /* intel_fifo_underrun.c */ |
| bool intel_set_cpu_fifo_underrun_reporting(struct drm_i915_private *dev_priv, |
| enum pipe pipe, bool enable); |
| bool intel_set_pch_fifo_underrun_reporting(struct drm_i915_private *dev_priv, |
| enum transcoder pch_transcoder, |
| bool enable); |
| void intel_cpu_fifo_underrun_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe); |
| void intel_pch_fifo_underrun_irq_handler(struct drm_i915_private *dev_priv, |
| enum transcoder pch_transcoder); |
| void i9xx_check_fifo_underruns(struct drm_i915_private *dev_priv); |
| |
| /* i915_irq.c */ |
| void gen5_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask); |
| void gen5_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask); |
| void gen6_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask); |
| void gen6_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask); |
| void gen6_reset_rps_interrupts(struct drm_device *dev); |
| void gen6_enable_rps_interrupts(struct drm_device *dev); |
| void gen6_disable_rps_interrupts(struct drm_device *dev); |
| void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv); |
| void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv); |
| static inline bool intel_irqs_enabled(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * We only use drm_irq_uninstall() at unload and VT switch, so |
| * this is the only thing we need to check. |
| */ |
| return dev_priv->pm.irqs_enabled; |
| } |
| |
| int intel_get_crtc_scanline(struct intel_crtc *crtc); |
| void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv); |
| |
| /* intel_crt.c */ |
| void intel_crt_init(struct drm_device *dev); |
| |
| |
| /* intel_ddi.c */ |
| void intel_prepare_ddi(struct drm_device *dev); |
| void hsw_fdi_link_train(struct drm_crtc *crtc); |
| void intel_ddi_init(struct drm_device *dev, enum port port); |
| enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder); |
| bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe); |
| int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv); |
| void intel_ddi_pll_init(struct drm_device *dev); |
| void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc); |
| void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder); |
| void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc); |
| void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc); |
| bool intel_ddi_pll_select(struct intel_crtc *crtc); |
| void intel_ddi_set_pipe_settings(struct drm_crtc *crtc); |
| void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder); |
| bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector); |
| void intel_ddi_fdi_disable(struct drm_crtc *crtc); |
| void intel_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config); |
| |
| void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder); |
| void intel_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config); |
| void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state); |
| |
| /* intel_frontbuffer.c */ |
| void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj, |
| struct intel_engine_cs *ring); |
| void intel_frontbuffer_flip_prepare(struct drm_device *dev, |
| unsigned frontbuffer_bits); |
| void intel_frontbuffer_flip_complete(struct drm_device *dev, |
| unsigned frontbuffer_bits); |
| void intel_frontbuffer_flush(struct drm_device *dev, |
| unsigned frontbuffer_bits); |
| /** |
| * intel_frontbuffer_flip - synchronous frontbuffer flip |
| * @dev: DRM device |
| * @frontbuffer_bits: frontbuffer plane tracking bits |
| * |
| * This function gets called after scheduling a flip on @obj. This is for |
| * synchronous plane updates which will happen on the next vblank and which will |
| * not get delayed by pending gpu rendering. |
| * |
| * Can be called without any locks held. |
| */ |
| static inline |
| void intel_frontbuffer_flip(struct drm_device *dev, |
| unsigned frontbuffer_bits) |
| { |
| intel_frontbuffer_flush(dev, frontbuffer_bits); |
| } |
| |
| void intel_fb_obj_flush(struct drm_i915_gem_object *obj, bool retire); |
| |
| |
| /* intel_audio.c */ |
| void intel_init_audio(struct drm_device *dev); |
| void intel_audio_codec_enable(struct intel_encoder *encoder); |
| void intel_audio_codec_disable(struct intel_encoder *encoder); |
| |
| /* intel_display.c */ |
| const char *intel_output_name(int output); |
| bool intel_has_pending_fb_unpin(struct drm_device *dev); |
| int intel_pch_rawclk(struct drm_device *dev); |
| void intel_mark_busy(struct drm_device *dev); |
| void intel_mark_idle(struct drm_device *dev); |
| void intel_crtc_restore_mode(struct drm_crtc *crtc); |
| void intel_crtc_control(struct drm_crtc *crtc, bool enable); |
| void intel_crtc_update_dpms(struct drm_crtc *crtc); |
| void intel_encoder_destroy(struct drm_encoder *encoder); |
| void intel_connector_dpms(struct drm_connector *, int mode); |
| bool intel_connector_get_hw_state(struct intel_connector *connector); |
| void intel_modeset_check_state(struct drm_device *dev); |
| bool ibx_digital_port_connected(struct drm_i915_private *dev_priv, |
| struct intel_digital_port *port); |
| void intel_connector_attach_encoder(struct intel_connector *connector, |
| struct intel_encoder *encoder); |
| struct drm_encoder *intel_best_encoder(struct drm_connector *connector); |
| struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, |
| struct drm_crtc *crtc); |
| enum pipe intel_get_pipe_from_connector(struct intel_connector *connector); |
| int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv, |
| enum pipe pipe); |
| bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type); |
| static inline void |
| intel_wait_for_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_wait_one_vblank(dev, pipe); |
| } |
| int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp); |
| void vlv_wait_port_ready(struct drm_i915_private *dev_priv, |
| struct intel_digital_port *dport); |
| bool intel_get_load_detect_pipe(struct drm_connector *connector, |
| struct drm_display_mode *mode, |
| struct intel_load_detect_pipe *old, |
| struct drm_modeset_acquire_ctx *ctx); |
| void intel_release_load_detect_pipe(struct drm_connector *connector, |
| struct intel_load_detect_pipe *old); |
| int intel_pin_and_fence_fb_obj(struct drm_plane *plane, |
| struct drm_framebuffer *fb, |
| struct intel_engine_cs *pipelined); |
| void intel_unpin_fb_obj(struct drm_i915_gem_object *obj); |
| struct drm_framebuffer * |
| __intel_framebuffer_create(struct drm_device *dev, |
| struct drm_mode_fb_cmd2 *mode_cmd, |
| struct drm_i915_gem_object *obj); |
| void intel_prepare_page_flip(struct drm_device *dev, int plane); |
| void intel_finish_page_flip(struct drm_device *dev, int pipe); |
| void intel_finish_page_flip_plane(struct drm_device *dev, int plane); |
| void intel_check_page_flip(struct drm_device *dev, int pipe); |
| |
| /* shared dpll functions */ |
| struct intel_shared_dpll *intel_crtc_to_shared_dpll(struct intel_crtc *crtc); |
| void assert_shared_dpll(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| bool state); |
| #define assert_shared_dpll_enabled(d, p) assert_shared_dpll(d, p, true) |
| #define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false) |
| struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc); |
| void intel_put_shared_dpll(struct intel_crtc *crtc); |
| |
| void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe, |
| const struct dpll *dpll); |
| void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe); |
| |
| /* modesetting asserts */ |
| void assert_panel_unlocked(struct drm_i915_private *dev_priv, |
| enum pipe pipe); |
| void assert_pll(struct drm_i915_private *dev_priv, |
| enum pipe pipe, bool state); |
| #define assert_pll_enabled(d, p) assert_pll(d, p, true) |
| #define assert_pll_disabled(d, p) assert_pll(d, p, false) |
| void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, |
| enum pipe pipe, bool state); |
| #define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true) |
| #define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false) |
| void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state); |
| #define assert_pipe_enabled(d, p) assert_pipe(d, p, true) |
| #define assert_pipe_disabled(d, p) assert_pipe(d, p, false) |
| unsigned long intel_gen4_compute_page_offset(int *x, int *y, |
| unsigned int tiling_mode, |
| unsigned int bpp, |
| unsigned int pitch); |
| void intel_prepare_reset(struct drm_device *dev); |
| void intel_finish_reset(struct drm_device *dev); |
| void hsw_enable_pc8(struct drm_i915_private *dev_priv); |
| void hsw_disable_pc8(struct drm_i915_private *dev_priv); |
| void intel_dp_get_m_n(struct intel_crtc *crtc, |
| struct intel_crtc_config *pipe_config); |
| void intel_dp_set_m_n(struct intel_crtc *crtc); |
| int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n); |
| void |
| ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config, |
| int dotclock); |
| bool intel_crtc_active(struct drm_crtc *crtc); |
| void hsw_enable_ips(struct intel_crtc *crtc); |
| void hsw_disable_ips(struct intel_crtc *crtc); |
| enum intel_display_power_domain |
| intel_display_port_power_domain(struct intel_encoder *intel_encoder); |
| void intel_mode_from_pipe_config(struct drm_display_mode *mode, |
| struct intel_crtc_config *pipe_config); |
| int intel_format_to_fourcc(int format); |
| void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc); |
| void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file); |
| |
| /* intel_dp.c */ |
| void intel_dp_init(struct drm_device *dev, int output_reg, enum port port); |
| bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port, |
| struct intel_connector *intel_connector); |
| void intel_dp_start_link_train(struct intel_dp *intel_dp); |
| void intel_dp_complete_link_train(struct intel_dp *intel_dp); |
| void intel_dp_stop_link_train(struct intel_dp *intel_dp); |
| void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); |
| void intel_dp_encoder_destroy(struct drm_encoder *encoder); |
| void intel_dp_check_link_status(struct intel_dp *intel_dp); |
| int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc); |
| bool intel_dp_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config); |
| bool intel_dp_is_edp(struct drm_device *dev, enum port port); |
| bool intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, |
| bool long_hpd); |
| void intel_edp_backlight_on(struct intel_dp *intel_dp); |
| void intel_edp_backlight_off(struct intel_dp *intel_dp); |
| void intel_edp_panel_vdd_on(struct intel_dp *intel_dp); |
| void intel_edp_panel_on(struct intel_dp *intel_dp); |
| void intel_edp_panel_off(struct intel_dp *intel_dp); |
| void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate); |
| void intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector); |
| void intel_dp_mst_suspend(struct drm_device *dev); |
| void intel_dp_mst_resume(struct drm_device *dev); |
| int intel_dp_max_link_bw(struct intel_dp *intel_dp); |
| void intel_dp_hot_plug(struct intel_encoder *intel_encoder); |
| void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv); |
| uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes); |
| void intel_dp_unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes); |
| |
| /* intel_dp_mst.c */ |
| int intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_id); |
| void intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port); |
| /* intel_dsi.c */ |
| void intel_dsi_init(struct drm_device *dev); |
| |
| |
| /* intel_dvo.c */ |
| void intel_dvo_init(struct drm_device *dev); |
| |
| |
| /* legacy fbdev emulation in intel_fbdev.c */ |
| #ifdef CONFIG_DRM_I915_FBDEV |
| extern int intel_fbdev_init(struct drm_device *dev); |
| extern void intel_fbdev_initial_config(void *data, async_cookie_t cookie); |
| extern void intel_fbdev_fini(struct drm_device *dev); |
| extern void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous); |
| extern void intel_fbdev_output_poll_changed(struct drm_device *dev); |
| extern void intel_fbdev_restore_mode(struct drm_device *dev); |
| #else |
| static inline int intel_fbdev_init(struct drm_device *dev) |
| { |
| return 0; |
| } |
| |
| static inline void intel_fbdev_initial_config(void *data, async_cookie_t cookie) |
| { |
| } |
| |
| static inline void intel_fbdev_fini(struct drm_device *dev) |
| { |
| } |
| |
| static inline void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous) |
| { |
| } |
| |
| static inline void intel_fbdev_restore_mode(struct drm_device *dev) |
| { |
| } |
| #endif |
| |
| /* intel_hdmi.c */ |
| void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port); |
| void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, |
| struct intel_connector *intel_connector); |
| struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder); |
| bool intel_hdmi_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config); |
| |
| |
| /* intel_lvds.c */ |
| void intel_lvds_init(struct drm_device *dev); |
| bool intel_is_dual_link_lvds(struct drm_device *dev); |
| |
| |
| /* intel_modes.c */ |
| int intel_connector_update_modes(struct drm_connector *connector, |
| struct edid *edid); |
| int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter); |
| void intel_attach_force_audio_property(struct drm_connector *connector); |
| void intel_attach_broadcast_rgb_property(struct drm_connector *connector); |
| |
| |
| /* intel_overlay.c */ |
| void intel_setup_overlay(struct drm_device *dev); |
| void intel_cleanup_overlay(struct drm_device *dev); |
| int intel_overlay_switch_off(struct intel_overlay *overlay); |
| int intel_overlay_put_image(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int intel_overlay_attrs(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| |
| |
| /* intel_panel.c */ |
| int intel_panel_init(struct intel_panel *panel, |
| struct drm_display_mode *fixed_mode, |
| struct drm_display_mode *downclock_mode); |
| void intel_panel_fini(struct intel_panel *panel); |
| void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode, |
| struct drm_display_mode *adjusted_mode); |
| void intel_pch_panel_fitting(struct intel_crtc *crtc, |
| struct intel_crtc_config *pipe_config, |
| int fitting_mode); |
| void intel_gmch_panel_fitting(struct intel_crtc *crtc, |
| struct intel_crtc_config *pipe_config, |
| int fitting_mode); |
| void intel_panel_set_backlight_acpi(struct intel_connector *connector, |
| u32 level, u32 max); |
| int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe); |
| void intel_panel_enable_backlight(struct intel_connector *connector); |
| void intel_panel_disable_backlight(struct intel_connector *connector); |
| void intel_panel_destroy_backlight(struct drm_connector *connector); |
| void intel_panel_init_backlight_funcs(struct drm_device *dev); |
| enum drm_connector_status intel_panel_detect(struct drm_device *dev); |
| extern struct drm_display_mode *intel_find_panel_downclock( |
| struct drm_device *dev, |
| struct drm_display_mode *fixed_mode, |
| struct drm_connector *connector); |
| void intel_backlight_register(struct drm_device *dev); |
| void intel_backlight_unregister(struct drm_device *dev); |
| |
| |
| /* intel_psr.c */ |
| bool intel_psr_is_enabled(struct drm_device *dev); |
| void intel_psr_enable(struct intel_dp *intel_dp); |
| void intel_psr_disable(struct intel_dp *intel_dp); |
| void intel_psr_invalidate(struct drm_device *dev, |
| unsigned frontbuffer_bits); |
| void intel_psr_flush(struct drm_device *dev, |
| unsigned frontbuffer_bits); |
| void intel_psr_init(struct drm_device *dev); |
| |
| /* intel_runtime_pm.c */ |
| int intel_power_domains_init(struct drm_i915_private *); |
| void intel_power_domains_fini(struct drm_i915_private *); |
| void intel_power_domains_init_hw(struct drm_i915_private *dev_priv); |
| void intel_runtime_pm_enable(struct drm_i915_private *dev_priv); |
| |
| bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain); |
| bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain); |
| void intel_display_power_get(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain); |
| void intel_display_power_put(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain); |
| void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv); |
| void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv); |
| void intel_runtime_pm_get(struct drm_i915_private *dev_priv); |
| void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv); |
| void intel_runtime_pm_put(struct drm_i915_private *dev_priv); |
| |
| void intel_display_set_init_power(struct drm_i915_private *dev, bool enable); |
| |
| /* intel_pm.c */ |
| void intel_init_clock_gating(struct drm_device *dev); |
| void intel_suspend_hw(struct drm_device *dev); |
| int ilk_wm_max_level(const struct drm_device *dev); |
| void intel_update_watermarks(struct drm_crtc *crtc); |
| void intel_update_sprite_watermarks(struct drm_plane *plane, |
| struct drm_crtc *crtc, |
| uint32_t sprite_width, |
| uint32_t sprite_height, |
| int pixel_size, |
| bool enabled, bool scaled); |
| void intel_init_pm(struct drm_device *dev); |
| void intel_pm_setup(struct drm_device *dev); |
| bool intel_fbc_enabled(struct drm_device *dev); |
| void intel_update_fbc(struct drm_device *dev); |
| void intel_gpu_ips_init(struct drm_i915_private *dev_priv); |
| void intel_gpu_ips_teardown(void); |
| void intel_init_gt_powersave(struct drm_device *dev); |
| void intel_cleanup_gt_powersave(struct drm_device *dev); |
| void intel_enable_gt_powersave(struct drm_device *dev); |
| void intel_disable_gt_powersave(struct drm_device *dev); |
| void intel_suspend_gt_powersave(struct drm_device *dev); |
| void intel_reset_gt_powersave(struct drm_device *dev); |
| void ironlake_teardown_rc6(struct drm_device *dev); |
| void gen6_update_ring_freq(struct drm_device *dev); |
| void gen6_rps_idle(struct drm_i915_private *dev_priv); |
| void gen6_rps_boost(struct drm_i915_private *dev_priv); |
| void ilk_wm_get_hw_state(struct drm_device *dev); |
| void skl_wm_get_hw_state(struct drm_device *dev); |
| void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv, |
| struct skl_ddb_allocation *ddb /* out */); |
| |
| |
| /* intel_sdvo.c */ |
| bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob); |
| |
| |
| /* intel_sprite.c */ |
| int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane); |
| void intel_flush_primary_plane(struct drm_i915_private *dev_priv, |
| enum plane plane); |
| int intel_plane_set_property(struct drm_plane *plane, |
| struct drm_property *prop, |
| uint64_t val); |
| int intel_plane_restore(struct drm_plane *plane); |
| void intel_plane_disable(struct drm_plane *plane); |
| int intel_sprite_set_colorkey(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int intel_sprite_get_colorkey(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| bool intel_pipe_update_start(struct intel_crtc *crtc, |
| uint32_t *start_vbl_count); |
| void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count); |
| |
| /* intel_tv.c */ |
| void intel_tv_init(struct drm_device *dev); |
| |
| #endif /* __INTEL_DRV_H__ */ |