| /* |
| * Copyright (c) 2000-2005 Silicon Graphics, Inc. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_types.h" |
| #include "xfs_bit.h" |
| #include "xfs_log.h" |
| #include "xfs_inum.h" |
| #include "xfs_trans.h" |
| #include "xfs_sb.h" |
| #include "xfs_ag.h" |
| #include "xfs_dir2.h" |
| #include "xfs_dmapi.h" |
| #include "xfs_mount.h" |
| #include "xfs_bmap_btree.h" |
| #include "xfs_alloc_btree.h" |
| #include "xfs_ialloc_btree.h" |
| #include "xfs_dir2_sf.h" |
| #include "xfs_attr_sf.h" |
| #include "xfs_dinode.h" |
| #include "xfs_inode.h" |
| #include "xfs_btree.h" |
| #include "xfs_ialloc.h" |
| #include "xfs_alloc.h" |
| #include "xfs_bmap.h" |
| #include "xfs_rtalloc.h" |
| #include "xfs_fsops.h" |
| #include "xfs_error.h" |
| #include "xfs_rw.h" |
| #include "xfs_inode_item.h" |
| #include "xfs_trans_space.h" |
| |
| |
| /* |
| * Prototypes for internal functions. |
| */ |
| |
| |
| STATIC int xfs_rtallocate_range(xfs_mount_t *, xfs_trans_t *, xfs_rtblock_t, |
| xfs_extlen_t, xfs_buf_t **, xfs_fsblock_t *); |
| STATIC int xfs_rtany_summary(xfs_mount_t *, xfs_trans_t *, int, int, |
| xfs_rtblock_t, xfs_buf_t **, xfs_fsblock_t *, int *); |
| STATIC int xfs_rtcheck_range(xfs_mount_t *, xfs_trans_t *, xfs_rtblock_t, |
| xfs_extlen_t, int, xfs_rtblock_t *, int *); |
| STATIC int xfs_rtfind_back(xfs_mount_t *, xfs_trans_t *, xfs_rtblock_t, |
| xfs_rtblock_t, xfs_rtblock_t *); |
| STATIC int xfs_rtfind_forw(xfs_mount_t *, xfs_trans_t *, xfs_rtblock_t, |
| xfs_rtblock_t, xfs_rtblock_t *); |
| STATIC int xfs_rtget_summary( xfs_mount_t *, xfs_trans_t *, int, |
| xfs_rtblock_t, xfs_buf_t **, xfs_fsblock_t *, xfs_suminfo_t *); |
| STATIC int xfs_rtmodify_range(xfs_mount_t *, xfs_trans_t *, xfs_rtblock_t, |
| xfs_extlen_t, int); |
| STATIC int xfs_rtmodify_summary(xfs_mount_t *, xfs_trans_t *, int, |
| xfs_rtblock_t, int, xfs_buf_t **, xfs_fsblock_t *); |
| |
| /* |
| * Internal functions. |
| */ |
| |
| /* |
| * xfs_lowbit32: get low bit set out of 32-bit argument, -1 if none set. |
| */ |
| STATIC int |
| xfs_lowbit32( |
| __uint32_t v) |
| { |
| if (v) |
| return ffs(v) - 1; |
| return -1; |
| } |
| |
| /* |
| * Allocate space to the bitmap or summary file, and zero it, for growfs. |
| */ |
| STATIC int /* error */ |
| xfs_growfs_rt_alloc( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_extlen_t oblocks, /* old count of blocks */ |
| xfs_extlen_t nblocks, /* new count of blocks */ |
| xfs_ino_t ino) /* inode number (bitmap/summary) */ |
| { |
| xfs_fileoff_t bno; /* block number in file */ |
| xfs_buf_t *bp; /* temporary buffer for zeroing */ |
| int cancelflags; /* flags for xfs_trans_cancel */ |
| int committed; /* transaction committed flag */ |
| xfs_daddr_t d; /* disk block address */ |
| int error; /* error return value */ |
| xfs_fsblock_t firstblock; /* first block allocated in xaction */ |
| xfs_bmap_free_t flist; /* list of freed blocks */ |
| xfs_fsblock_t fsbno; /* filesystem block for bno */ |
| xfs_inode_t *ip; /* pointer to incore inode */ |
| xfs_bmbt_irec_t map; /* block map output */ |
| int nmap; /* number of block maps */ |
| int resblks; /* space reservation */ |
| xfs_trans_t *tp; /* transaction pointer */ |
| |
| /* |
| * Allocate space to the file, as necessary. |
| */ |
| while (oblocks < nblocks) { |
| tp = xfs_trans_alloc(mp, XFS_TRANS_GROWFSRT_ALLOC); |
| resblks = XFS_GROWFSRT_SPACE_RES(mp, nblocks - oblocks); |
| cancelflags = 0; |
| /* |
| * Reserve space & log for one extent added to the file. |
| */ |
| if ((error = xfs_trans_reserve(tp, resblks, |
| XFS_GROWRTALLOC_LOG_RES(mp), 0, |
| XFS_TRANS_PERM_LOG_RES, |
| XFS_DEFAULT_PERM_LOG_COUNT))) |
| goto error_exit; |
| cancelflags = XFS_TRANS_RELEASE_LOG_RES; |
| /* |
| * Lock the inode. |
| */ |
| if ((error = xfs_trans_iget(mp, tp, ino, 0, |
| XFS_ILOCK_EXCL, &ip))) |
| goto error_exit; |
| XFS_BMAP_INIT(&flist, &firstblock); |
| /* |
| * Allocate blocks to the bitmap file. |
| */ |
| nmap = 1; |
| cancelflags |= XFS_TRANS_ABORT; |
| error = xfs_bmapi(tp, ip, oblocks, nblocks - oblocks, |
| XFS_BMAPI_WRITE | XFS_BMAPI_METADATA, &firstblock, |
| resblks, &map, &nmap, &flist, NULL); |
| if (!error && nmap < 1) |
| error = XFS_ERROR(ENOSPC); |
| if (error) |
| goto error_exit; |
| /* |
| * Free any blocks freed up in the transaction, then commit. |
| */ |
| error = xfs_bmap_finish(&tp, &flist, &committed); |
| if (error) |
| goto error_exit; |
| xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES); |
| /* |
| * Now we need to clear the allocated blocks. |
| * Do this one block per transaction, to keep it simple. |
| */ |
| cancelflags = 0; |
| for (bno = map.br_startoff, fsbno = map.br_startblock; |
| bno < map.br_startoff + map.br_blockcount; |
| bno++, fsbno++) { |
| tp = xfs_trans_alloc(mp, XFS_TRANS_GROWFSRT_ZERO); |
| /* |
| * Reserve log for one block zeroing. |
| */ |
| if ((error = xfs_trans_reserve(tp, 0, |
| XFS_GROWRTZERO_LOG_RES(mp), 0, 0, 0))) |
| goto error_exit; |
| /* |
| * Lock the bitmap inode. |
| */ |
| if ((error = xfs_trans_iget(mp, tp, ino, 0, |
| XFS_ILOCK_EXCL, &ip))) |
| goto error_exit; |
| /* |
| * Get a buffer for the block. |
| */ |
| d = XFS_FSB_TO_DADDR(mp, fsbno); |
| bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, |
| mp->m_bsize, 0); |
| if (bp == NULL) { |
| error = XFS_ERROR(EIO); |
| goto error_exit; |
| } |
| memset(XFS_BUF_PTR(bp), 0, mp->m_sb.sb_blocksize); |
| xfs_trans_log_buf(tp, bp, 0, mp->m_sb.sb_blocksize - 1); |
| /* |
| * Commit the transaction. |
| */ |
| xfs_trans_commit(tp, 0); |
| } |
| /* |
| * Go on to the next extent, if any. |
| */ |
| oblocks = map.br_startoff + map.br_blockcount; |
| } |
| return 0; |
| error_exit: |
| xfs_trans_cancel(tp, cancelflags); |
| return error; |
| } |
| |
| /* |
| * Attempt to allocate an extent minlen<=len<=maxlen starting from |
| * bitmap block bbno. If we don't get maxlen then use prod to trim |
| * the length, if given. Returns error; returns starting block in *rtblock. |
| * The lengths are all in rtextents. |
| */ |
| STATIC int /* error */ |
| xfs_rtallocate_extent_block( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t bbno, /* bitmap block number */ |
| xfs_extlen_t minlen, /* minimum length to allocate */ |
| xfs_extlen_t maxlen, /* maximum length to allocate */ |
| xfs_extlen_t *len, /* out: actual length allocated */ |
| xfs_rtblock_t *nextp, /* out: next block to try */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb, /* in/out: summary block number */ |
| xfs_extlen_t prod, /* extent product factor */ |
| xfs_rtblock_t *rtblock) /* out: start block allocated */ |
| { |
| xfs_rtblock_t besti; /* best rtblock found so far */ |
| xfs_rtblock_t bestlen; /* best length found so far */ |
| xfs_rtblock_t end; /* last rtblock in chunk */ |
| int error; /* error value */ |
| xfs_rtblock_t i; /* current rtblock trying */ |
| xfs_rtblock_t next; /* next rtblock to try */ |
| int stat; /* status from internal calls */ |
| |
| /* |
| * Loop over all the extents starting in this bitmap block, |
| * looking for one that's long enough. |
| */ |
| for (i = XFS_BLOCKTOBIT(mp, bbno), besti = -1, bestlen = 0, |
| end = XFS_BLOCKTOBIT(mp, bbno + 1) - 1; |
| i <= end; |
| i++) { |
| /* |
| * See if there's a free extent of maxlen starting at i. |
| * If it's not so then next will contain the first non-free. |
| */ |
| error = xfs_rtcheck_range(mp, tp, i, maxlen, 1, &next, &stat); |
| if (error) { |
| return error; |
| } |
| if (stat) { |
| /* |
| * i for maxlen is all free, allocate and return that. |
| */ |
| error = xfs_rtallocate_range(mp, tp, i, maxlen, rbpp, |
| rsb); |
| if (error) { |
| return error; |
| } |
| *len = maxlen; |
| *rtblock = i; |
| return 0; |
| } |
| /* |
| * In the case where we have a variable-sized allocation |
| * request, figure out how big this free piece is, |
| * and if it's big enough for the minimum, and the best |
| * so far, remember it. |
| */ |
| if (minlen < maxlen) { |
| xfs_rtblock_t thislen; /* this extent size */ |
| |
| thislen = next - i; |
| if (thislen >= minlen && thislen > bestlen) { |
| besti = i; |
| bestlen = thislen; |
| } |
| } |
| /* |
| * If not done yet, find the start of the next free space. |
| */ |
| if (next < end) { |
| error = xfs_rtfind_forw(mp, tp, next, end, &i); |
| if (error) { |
| return error; |
| } |
| } else |
| break; |
| } |
| /* |
| * Searched the whole thing & didn't find a maxlen free extent. |
| */ |
| if (minlen < maxlen && besti != -1) { |
| xfs_extlen_t p; /* amount to trim length by */ |
| |
| /* |
| * If size should be a multiple of prod, make that so. |
| */ |
| if (prod > 1 && (p = do_mod(bestlen, prod))) |
| bestlen -= p; |
| /* |
| * Allocate besti for bestlen & return that. |
| */ |
| error = xfs_rtallocate_range(mp, tp, besti, bestlen, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| *len = bestlen; |
| *rtblock = besti; |
| return 0; |
| } |
| /* |
| * Allocation failed. Set *nextp to the next block to try. |
| */ |
| *nextp = next; |
| *rtblock = NULLRTBLOCK; |
| return 0; |
| } |
| |
| /* |
| * Allocate an extent of length minlen<=len<=maxlen, starting at block |
| * bno. If we don't get maxlen then use prod to trim the length, if given. |
| * Returns error; returns starting block in *rtblock. |
| * The lengths are all in rtextents. |
| */ |
| STATIC int /* error */ |
| xfs_rtallocate_extent_exact( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t bno, /* starting block number to allocate */ |
| xfs_extlen_t minlen, /* minimum length to allocate */ |
| xfs_extlen_t maxlen, /* maximum length to allocate */ |
| xfs_extlen_t *len, /* out: actual length allocated */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb, /* in/out: summary block number */ |
| xfs_extlen_t prod, /* extent product factor */ |
| xfs_rtblock_t *rtblock) /* out: start block allocated */ |
| { |
| int error; /* error value */ |
| xfs_extlen_t i; /* extent length trimmed due to prod */ |
| int isfree; /* extent is free */ |
| xfs_rtblock_t next; /* next block to try (dummy) */ |
| |
| ASSERT(minlen % prod == 0 && maxlen % prod == 0); |
| /* |
| * Check if the range in question (for maxlen) is free. |
| */ |
| error = xfs_rtcheck_range(mp, tp, bno, maxlen, 1, &next, &isfree); |
| if (error) { |
| return error; |
| } |
| if (isfree) { |
| /* |
| * If it is, allocate it and return success. |
| */ |
| error = xfs_rtallocate_range(mp, tp, bno, maxlen, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| *len = maxlen; |
| *rtblock = bno; |
| return 0; |
| } |
| /* |
| * If not, allocate what there is, if it's at least minlen. |
| */ |
| maxlen = next - bno; |
| if (maxlen < minlen) { |
| /* |
| * Failed, return failure status. |
| */ |
| *rtblock = NULLRTBLOCK; |
| return 0; |
| } |
| /* |
| * Trim off tail of extent, if prod is specified. |
| */ |
| if (prod > 1 && (i = maxlen % prod)) { |
| maxlen -= i; |
| if (maxlen < minlen) { |
| /* |
| * Now we can't do it, return failure status. |
| */ |
| *rtblock = NULLRTBLOCK; |
| return 0; |
| } |
| } |
| /* |
| * Allocate what we can and return it. |
| */ |
| error = xfs_rtallocate_range(mp, tp, bno, maxlen, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| *len = maxlen; |
| *rtblock = bno; |
| return 0; |
| } |
| |
| /* |
| * Allocate an extent of length minlen<=len<=maxlen, starting as near |
| * to bno as possible. If we don't get maxlen then use prod to trim |
| * the length, if given. The lengths are all in rtextents. |
| */ |
| STATIC int /* error */ |
| xfs_rtallocate_extent_near( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t bno, /* starting block number to allocate */ |
| xfs_extlen_t minlen, /* minimum length to allocate */ |
| xfs_extlen_t maxlen, /* maximum length to allocate */ |
| xfs_extlen_t *len, /* out: actual length allocated */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb, /* in/out: summary block number */ |
| xfs_extlen_t prod, /* extent product factor */ |
| xfs_rtblock_t *rtblock) /* out: start block allocated */ |
| { |
| int any; /* any useful extents from summary */ |
| xfs_rtblock_t bbno; /* bitmap block number */ |
| int error; /* error value */ |
| int i; /* bitmap block offset (loop control) */ |
| int j; /* secondary loop control */ |
| int log2len; /* log2 of minlen */ |
| xfs_rtblock_t n; /* next block to try */ |
| xfs_rtblock_t r; /* result block */ |
| |
| ASSERT(minlen % prod == 0 && maxlen % prod == 0); |
| /* |
| * If the block number given is off the end, silently set it to |
| * the last block. |
| */ |
| if (bno >= mp->m_sb.sb_rextents) |
| bno = mp->m_sb.sb_rextents - 1; |
| /* |
| * Try the exact allocation first. |
| */ |
| error = xfs_rtallocate_extent_exact(mp, tp, bno, minlen, maxlen, len, |
| rbpp, rsb, prod, &r); |
| if (error) { |
| return error; |
| } |
| /* |
| * If the exact allocation worked, return that. |
| */ |
| if (r != NULLRTBLOCK) { |
| *rtblock = r; |
| return 0; |
| } |
| bbno = XFS_BITTOBLOCK(mp, bno); |
| i = 0; |
| log2len = xfs_highbit32(minlen); |
| /* |
| * Loop over all bitmap blocks (bbno + i is current block). |
| */ |
| for (;;) { |
| /* |
| * Get summary information of extents of all useful levels |
| * starting in this bitmap block. |
| */ |
| error = xfs_rtany_summary(mp, tp, log2len, mp->m_rsumlevels - 1, |
| bbno + i, rbpp, rsb, &any); |
| if (error) { |
| return error; |
| } |
| /* |
| * If there are any useful extents starting here, try |
| * allocating one. |
| */ |
| if (any) { |
| /* |
| * On the positive side of the starting location. |
| */ |
| if (i >= 0) { |
| /* |
| * Try to allocate an extent starting in |
| * this block. |
| */ |
| error = xfs_rtallocate_extent_block(mp, tp, |
| bbno + i, minlen, maxlen, len, &n, rbpp, |
| rsb, prod, &r); |
| if (error) { |
| return error; |
| } |
| /* |
| * If it worked, return it. |
| */ |
| if (r != NULLRTBLOCK) { |
| *rtblock = r; |
| return 0; |
| } |
| } |
| /* |
| * On the negative side of the starting location. |
| */ |
| else { /* i < 0 */ |
| /* |
| * Loop backwards through the bitmap blocks from |
| * the starting point-1 up to where we are now. |
| * There should be an extent which ends in this |
| * bitmap block and is long enough. |
| */ |
| for (j = -1; j > i; j--) { |
| /* |
| * Grab the summary information for |
| * this bitmap block. |
| */ |
| error = xfs_rtany_summary(mp, tp, |
| log2len, mp->m_rsumlevels - 1, |
| bbno + j, rbpp, rsb, &any); |
| if (error) { |
| return error; |
| } |
| /* |
| * If there's no extent given in the |
| * summary that means the extent we |
| * found must carry over from an |
| * earlier block. If there is an |
| * extent given, we've already tried |
| * that allocation, don't do it again. |
| */ |
| if (any) |
| continue; |
| error = xfs_rtallocate_extent_block(mp, |
| tp, bbno + j, minlen, maxlen, |
| len, &n, rbpp, rsb, prod, &r); |
| if (error) { |
| return error; |
| } |
| /* |
| * If it works, return the extent. |
| */ |
| if (r != NULLRTBLOCK) { |
| *rtblock = r; |
| return 0; |
| } |
| } |
| /* |
| * There weren't intervening bitmap blocks |
| * with a long enough extent, or the |
| * allocation didn't work for some reason |
| * (i.e. it's a little * too short). |
| * Try to allocate from the summary block |
| * that we found. |
| */ |
| error = xfs_rtallocate_extent_block(mp, tp, |
| bbno + i, minlen, maxlen, len, &n, rbpp, |
| rsb, prod, &r); |
| if (error) { |
| return error; |
| } |
| /* |
| * If it works, return the extent. |
| */ |
| if (r != NULLRTBLOCK) { |
| *rtblock = r; |
| return 0; |
| } |
| } |
| } |
| /* |
| * Loop control. If we were on the positive side, and there's |
| * still more blocks on the negative side, go there. |
| */ |
| if (i > 0 && (int)bbno - i >= 0) |
| i = -i; |
| /* |
| * If positive, and no more negative, but there are more |
| * positive, go there. |
| */ |
| else if (i > 0 && (int)bbno + i < mp->m_sb.sb_rbmblocks - 1) |
| i++; |
| /* |
| * If negative or 0 (just started), and there are positive |
| * blocks to go, go there. The 0 case moves to block 1. |
| */ |
| else if (i <= 0 && (int)bbno - i < mp->m_sb.sb_rbmblocks - 1) |
| i = 1 - i; |
| /* |
| * If negative or 0 and there are more negative blocks, |
| * go there. |
| */ |
| else if (i <= 0 && (int)bbno + i > 0) |
| i--; |
| /* |
| * Must be done. Return failure. |
| */ |
| else |
| break; |
| } |
| *rtblock = NULLRTBLOCK; |
| return 0; |
| } |
| |
| /* |
| * Allocate an extent of length minlen<=len<=maxlen, with no position |
| * specified. If we don't get maxlen then use prod to trim |
| * the length, if given. The lengths are all in rtextents. |
| */ |
| STATIC int /* error */ |
| xfs_rtallocate_extent_size( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_extlen_t minlen, /* minimum length to allocate */ |
| xfs_extlen_t maxlen, /* maximum length to allocate */ |
| xfs_extlen_t *len, /* out: actual length allocated */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb, /* in/out: summary block number */ |
| xfs_extlen_t prod, /* extent product factor */ |
| xfs_rtblock_t *rtblock) /* out: start block allocated */ |
| { |
| int error; /* error value */ |
| int i; /* bitmap block number */ |
| int l; /* level number (loop control) */ |
| xfs_rtblock_t n; /* next block to be tried */ |
| xfs_rtblock_t r; /* result block number */ |
| xfs_suminfo_t sum; /* summary information for extents */ |
| |
| ASSERT(minlen % prod == 0 && maxlen % prod == 0); |
| /* |
| * Loop over all the levels starting with maxlen. |
| * At each level, look at all the bitmap blocks, to see if there |
| * are extents starting there that are long enough (>= maxlen). |
| * Note, only on the initial level can the allocation fail if |
| * the summary says there's an extent. |
| */ |
| for (l = xfs_highbit32(maxlen); l < mp->m_rsumlevels; l++) { |
| /* |
| * Loop over all the bitmap blocks. |
| */ |
| for (i = 0; i < mp->m_sb.sb_rbmblocks; i++) { |
| /* |
| * Get the summary for this level/block. |
| */ |
| error = xfs_rtget_summary(mp, tp, l, i, rbpp, rsb, |
| &sum); |
| if (error) { |
| return error; |
| } |
| /* |
| * Nothing there, on to the next block. |
| */ |
| if (!sum) |
| continue; |
| /* |
| * Try allocating the extent. |
| */ |
| error = xfs_rtallocate_extent_block(mp, tp, i, maxlen, |
| maxlen, len, &n, rbpp, rsb, prod, &r); |
| if (error) { |
| return error; |
| } |
| /* |
| * If it worked, return that. |
| */ |
| if (r != NULLRTBLOCK) { |
| *rtblock = r; |
| return 0; |
| } |
| /* |
| * If the "next block to try" returned from the |
| * allocator is beyond the next bitmap block, |
| * skip to that bitmap block. |
| */ |
| if (XFS_BITTOBLOCK(mp, n) > i + 1) |
| i = XFS_BITTOBLOCK(mp, n) - 1; |
| } |
| } |
| /* |
| * Didn't find any maxlen blocks. Try smaller ones, unless |
| * we're asking for a fixed size extent. |
| */ |
| if (minlen > --maxlen) { |
| *rtblock = NULLRTBLOCK; |
| return 0; |
| } |
| /* |
| * Loop over sizes, from maxlen down to minlen. |
| * This time, when we do the allocations, allow smaller ones |
| * to succeed. |
| */ |
| for (l = xfs_highbit32(maxlen); l >= xfs_highbit32(minlen); l--) { |
| /* |
| * Loop over all the bitmap blocks, try an allocation |
| * starting in that block. |
| */ |
| for (i = 0; i < mp->m_sb.sb_rbmblocks; i++) { |
| /* |
| * Get the summary information for this level/block. |
| */ |
| error = xfs_rtget_summary(mp, tp, l, i, rbpp, rsb, |
| &sum); |
| if (error) { |
| return error; |
| } |
| /* |
| * If nothing there, go on to next. |
| */ |
| if (!sum) |
| continue; |
| /* |
| * Try the allocation. Make sure the specified |
| * minlen/maxlen are in the possible range for |
| * this summary level. |
| */ |
| error = xfs_rtallocate_extent_block(mp, tp, i, |
| XFS_RTMAX(minlen, 1 << l), |
| XFS_RTMIN(maxlen, (1 << (l + 1)) - 1), |
| len, &n, rbpp, rsb, prod, &r); |
| if (error) { |
| return error; |
| } |
| /* |
| * If it worked, return that extent. |
| */ |
| if (r != NULLRTBLOCK) { |
| *rtblock = r; |
| return 0; |
| } |
| /* |
| * If the "next block to try" returned from the |
| * allocator is beyond the next bitmap block, |
| * skip to that bitmap block. |
| */ |
| if (XFS_BITTOBLOCK(mp, n) > i + 1) |
| i = XFS_BITTOBLOCK(mp, n) - 1; |
| } |
| } |
| /* |
| * Got nothing, return failure. |
| */ |
| *rtblock = NULLRTBLOCK; |
| return 0; |
| } |
| |
| /* |
| * Mark an extent specified by start and len allocated. |
| * Updates all the summary information as well as the bitmap. |
| */ |
| STATIC int /* error */ |
| xfs_rtallocate_range( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t start, /* start block to allocate */ |
| xfs_extlen_t len, /* length to allocate */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb) /* in/out: summary block number */ |
| { |
| xfs_rtblock_t end; /* end of the allocated extent */ |
| int error; /* error value */ |
| xfs_rtblock_t postblock; /* first block allocated > end */ |
| xfs_rtblock_t preblock; /* first block allocated < start */ |
| |
| end = start + len - 1; |
| /* |
| * Assume we're allocating out of the middle of a free extent. |
| * We need to find the beginning and end of the extent so we can |
| * properly update the summary. |
| */ |
| error = xfs_rtfind_back(mp, tp, start, 0, &preblock); |
| if (error) { |
| return error; |
| } |
| /* |
| * Find the next allocated block (end of free extent). |
| */ |
| error = xfs_rtfind_forw(mp, tp, end, mp->m_sb.sb_rextents - 1, |
| &postblock); |
| if (error) { |
| return error; |
| } |
| /* |
| * Decrement the summary information corresponding to the entire |
| * (old) free extent. |
| */ |
| error = xfs_rtmodify_summary(mp, tp, |
| XFS_RTBLOCKLOG(postblock + 1 - preblock), |
| XFS_BITTOBLOCK(mp, preblock), -1, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| /* |
| * If there are blocks not being allocated at the front of the |
| * old extent, add summary data for them to be free. |
| */ |
| if (preblock < start) { |
| error = xfs_rtmodify_summary(mp, tp, |
| XFS_RTBLOCKLOG(start - preblock), |
| XFS_BITTOBLOCK(mp, preblock), 1, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| } |
| /* |
| * If there are blocks not being allocated at the end of the |
| * old extent, add summary data for them to be free. |
| */ |
| if (postblock > end) { |
| error = xfs_rtmodify_summary(mp, tp, |
| XFS_RTBLOCKLOG(postblock - end), |
| XFS_BITTOBLOCK(mp, end + 1), 1, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| } |
| /* |
| * Modify the bitmap to mark this extent allocated. |
| */ |
| error = xfs_rtmodify_range(mp, tp, start, len, 0); |
| return error; |
| } |
| |
| /* |
| * Return whether there are any free extents in the size range given |
| * by low and high, for the bitmap block bbno. |
| */ |
| STATIC int /* error */ |
| xfs_rtany_summary( |
| xfs_mount_t *mp, /* file system mount structure */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| int low, /* low log2 extent size */ |
| int high, /* high log2 extent size */ |
| xfs_rtblock_t bbno, /* bitmap block number */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb, /* in/out: summary block number */ |
| int *stat) /* out: any good extents here? */ |
| { |
| int error; /* error value */ |
| int log; /* loop counter, log2 of ext. size */ |
| xfs_suminfo_t sum; /* summary data */ |
| |
| /* |
| * Loop over logs of extent sizes. Order is irrelevant. |
| */ |
| for (log = low; log <= high; log++) { |
| /* |
| * Get one summary datum. |
| */ |
| error = xfs_rtget_summary(mp, tp, log, bbno, rbpp, rsb, &sum); |
| if (error) { |
| return error; |
| } |
| /* |
| * If there are any, return success. |
| */ |
| if (sum) { |
| *stat = 1; |
| return 0; |
| } |
| } |
| /* |
| * Found nothing, return failure. |
| */ |
| *stat = 0; |
| return 0; |
| } |
| |
| /* |
| * Get a buffer for the bitmap or summary file block specified. |
| * The buffer is returned read and locked. |
| */ |
| STATIC int /* error */ |
| xfs_rtbuf_get( |
| xfs_mount_t *mp, /* file system mount structure */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t block, /* block number in bitmap or summary */ |
| int issum, /* is summary not bitmap */ |
| xfs_buf_t **bpp) /* output: buffer for the block */ |
| { |
| xfs_buf_t *bp; /* block buffer, result */ |
| xfs_daddr_t d; /* disk addr of block */ |
| int error; /* error value */ |
| xfs_fsblock_t fsb; /* fs block number for block */ |
| xfs_inode_t *ip; /* bitmap or summary inode */ |
| |
| ip = issum ? mp->m_rsumip : mp->m_rbmip; |
| /* |
| * Map from the file offset (block) and inode number to the |
| * file system block. |
| */ |
| error = xfs_bmapi_single(tp, ip, XFS_DATA_FORK, &fsb, block); |
| if (error) { |
| return error; |
| } |
| ASSERT(fsb != NULLFSBLOCK); |
| /* |
| * Convert to disk address for buffer cache. |
| */ |
| d = XFS_FSB_TO_DADDR(mp, fsb); |
| /* |
| * Read the buffer. |
| */ |
| error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, d, |
| mp->m_bsize, 0, &bp); |
| if (error) { |
| return error; |
| } |
| ASSERT(bp && !XFS_BUF_GETERROR(bp)); |
| *bpp = bp; |
| return 0; |
| } |
| |
| #ifdef DEBUG |
| /* |
| * Check that the given extent (block range) is allocated already. |
| */ |
| STATIC int /* error */ |
| xfs_rtcheck_alloc_range( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t bno, /* starting block number of extent */ |
| xfs_extlen_t len, /* length of extent */ |
| int *stat) /* out: 1 for allocated, 0 for not */ |
| { |
| xfs_rtblock_t new; /* dummy for xfs_rtcheck_range */ |
| |
| return xfs_rtcheck_range(mp, tp, bno, len, 0, &new, stat); |
| } |
| #endif |
| |
| /* |
| * Check that the given range is either all allocated (val = 0) or |
| * all free (val = 1). |
| */ |
| STATIC int /* error */ |
| xfs_rtcheck_range( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t start, /* starting block number of extent */ |
| xfs_extlen_t len, /* length of extent */ |
| int val, /* 1 for free, 0 for allocated */ |
| xfs_rtblock_t *new, /* out: first block not matching */ |
| int *stat) /* out: 1 for matches, 0 for not */ |
| { |
| xfs_rtword_t *b; /* current word in buffer */ |
| int bit; /* bit number in the word */ |
| xfs_rtblock_t block; /* bitmap block number */ |
| xfs_buf_t *bp; /* buf for the block */ |
| xfs_rtword_t *bufp; /* starting word in buffer */ |
| int error; /* error value */ |
| xfs_rtblock_t i; /* current bit number rel. to start */ |
| xfs_rtblock_t lastbit; /* last useful bit in word */ |
| xfs_rtword_t mask; /* mask of relevant bits for value */ |
| xfs_rtword_t wdiff; /* difference from wanted value */ |
| int word; /* word number in the buffer */ |
| |
| /* |
| * Compute starting bitmap block number |
| */ |
| block = XFS_BITTOBLOCK(mp, start); |
| /* |
| * Read the bitmap block. |
| */ |
| error = xfs_rtbuf_get(mp, tp, block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| /* |
| * Compute the starting word's address, and starting bit. |
| */ |
| word = XFS_BITTOWORD(mp, start); |
| b = &bufp[word]; |
| bit = (int)(start & (XFS_NBWORD - 1)); |
| /* |
| * 0 (allocated) => all zero's; 1 (free) => all one's. |
| */ |
| val = -val; |
| /* |
| * If not starting on a word boundary, deal with the first |
| * (partial) word. |
| */ |
| if (bit) { |
| /* |
| * Compute first bit not examined. |
| */ |
| lastbit = XFS_RTMIN(bit + len, XFS_NBWORD); |
| /* |
| * Mask of relevant bits. |
| */ |
| mask = (((xfs_rtword_t)1 << (lastbit - bit)) - 1) << bit; |
| /* |
| * Compute difference between actual and desired value. |
| */ |
| if ((wdiff = (*b ^ val) & mask)) { |
| /* |
| * Different, compute first wrong bit and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i = XFS_RTLOBIT(wdiff) - bit; |
| *new = start + i; |
| *stat = 0; |
| return 0; |
| } |
| i = lastbit - bit; |
| /* |
| * Go on to next block if that's where the next word is |
| * and we need the next word. |
| */ |
| if (++word == XFS_BLOCKWSIZE(mp) && i < len) { |
| /* |
| * If done with this block, get the next one. |
| */ |
| xfs_trans_brelse(tp, bp); |
| error = xfs_rtbuf_get(mp, tp, ++block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = 0; |
| } else { |
| /* |
| * Go on to the next word in the buffer. |
| */ |
| b++; |
| } |
| } else { |
| /* |
| * Starting on a word boundary, no partial word. |
| */ |
| i = 0; |
| } |
| /* |
| * Loop over whole words in buffers. When we use up one buffer |
| * we move on to the next one. |
| */ |
| while (len - i >= XFS_NBWORD) { |
| /* |
| * Compute difference between actual and desired value. |
| */ |
| if ((wdiff = *b ^ val)) { |
| /* |
| * Different, compute first wrong bit and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i += XFS_RTLOBIT(wdiff); |
| *new = start + i; |
| *stat = 0; |
| return 0; |
| } |
| i += XFS_NBWORD; |
| /* |
| * Go on to next block if that's where the next word is |
| * and we need the next word. |
| */ |
| if (++word == XFS_BLOCKWSIZE(mp) && i < len) { |
| /* |
| * If done with this block, get the next one. |
| */ |
| xfs_trans_brelse(tp, bp); |
| error = xfs_rtbuf_get(mp, tp, ++block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = 0; |
| } else { |
| /* |
| * Go on to the next word in the buffer. |
| */ |
| b++; |
| } |
| } |
| /* |
| * If not ending on a word boundary, deal with the last |
| * (partial) word. |
| */ |
| if ((lastbit = len - i)) { |
| /* |
| * Mask of relevant bits. |
| */ |
| mask = ((xfs_rtword_t)1 << lastbit) - 1; |
| /* |
| * Compute difference between actual and desired value. |
| */ |
| if ((wdiff = (*b ^ val) & mask)) { |
| /* |
| * Different, compute first wrong bit and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i += XFS_RTLOBIT(wdiff); |
| *new = start + i; |
| *stat = 0; |
| return 0; |
| } else |
| i = len; |
| } |
| /* |
| * Successful, return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| *new = start + i; |
| *stat = 1; |
| return 0; |
| } |
| |
| /* |
| * Copy and transform the summary file, given the old and new |
| * parameters in the mount structures. |
| */ |
| STATIC int /* error */ |
| xfs_rtcopy_summary( |
| xfs_mount_t *omp, /* old file system mount point */ |
| xfs_mount_t *nmp, /* new file system mount point */ |
| xfs_trans_t *tp) /* transaction pointer */ |
| { |
| xfs_rtblock_t bbno; /* bitmap block number */ |
| xfs_buf_t *bp; /* summary buffer */ |
| int error; /* error return value */ |
| int log; /* summary level number (log length) */ |
| xfs_suminfo_t sum; /* summary data */ |
| xfs_fsblock_t sumbno; /* summary block number */ |
| |
| bp = NULL; |
| for (log = omp->m_rsumlevels - 1; log >= 0; log--) { |
| for (bbno = omp->m_sb.sb_rbmblocks - 1; |
| (xfs_srtblock_t)bbno >= 0; |
| bbno--) { |
| error = xfs_rtget_summary(omp, tp, log, bbno, &bp, |
| &sumbno, &sum); |
| if (error) |
| return error; |
| if (sum == 0) |
| continue; |
| error = xfs_rtmodify_summary(omp, tp, log, bbno, -sum, |
| &bp, &sumbno); |
| if (error) |
| return error; |
| error = xfs_rtmodify_summary(nmp, tp, log, bbno, sum, |
| &bp, &sumbno); |
| if (error) |
| return error; |
| ASSERT(sum > 0); |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Searching backward from start to limit, find the first block whose |
| * allocated/free state is different from start's. |
| */ |
| STATIC int /* error */ |
| xfs_rtfind_back( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t start, /* starting block to look at */ |
| xfs_rtblock_t limit, /* last block to look at */ |
| xfs_rtblock_t *rtblock) /* out: start block found */ |
| { |
| xfs_rtword_t *b; /* current word in buffer */ |
| int bit; /* bit number in the word */ |
| xfs_rtblock_t block; /* bitmap block number */ |
| xfs_buf_t *bp; /* buf for the block */ |
| xfs_rtword_t *bufp; /* starting word in buffer */ |
| int error; /* error value */ |
| xfs_rtblock_t firstbit; /* first useful bit in the word */ |
| xfs_rtblock_t i; /* current bit number rel. to start */ |
| xfs_rtblock_t len; /* length of inspected area */ |
| xfs_rtword_t mask; /* mask of relevant bits for value */ |
| xfs_rtword_t want; /* mask for "good" values */ |
| xfs_rtword_t wdiff; /* difference from wanted value */ |
| int word; /* word number in the buffer */ |
| |
| /* |
| * Compute and read in starting bitmap block for starting block. |
| */ |
| block = XFS_BITTOBLOCK(mp, start); |
| error = xfs_rtbuf_get(mp, tp, block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| /* |
| * Get the first word's index & point to it. |
| */ |
| word = XFS_BITTOWORD(mp, start); |
| b = &bufp[word]; |
| bit = (int)(start & (XFS_NBWORD - 1)); |
| len = start - limit + 1; |
| /* |
| * Compute match value, based on the bit at start: if 1 (free) |
| * then all-ones, else all-zeroes. |
| */ |
| want = (*b & ((xfs_rtword_t)1 << bit)) ? -1 : 0; |
| /* |
| * If the starting position is not word-aligned, deal with the |
| * partial word. |
| */ |
| if (bit < XFS_NBWORD - 1) { |
| /* |
| * Calculate first (leftmost) bit number to look at, |
| * and mask for all the relevant bits in this word. |
| */ |
| firstbit = XFS_RTMAX((xfs_srtblock_t)(bit - len + 1), 0); |
| mask = (((xfs_rtword_t)1 << (bit - firstbit + 1)) - 1) << |
| firstbit; |
| /* |
| * Calculate the difference between the value there |
| * and what we're looking for. |
| */ |
| if ((wdiff = (*b ^ want) & mask)) { |
| /* |
| * Different. Mark where we are and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i = bit - XFS_RTHIBIT(wdiff); |
| *rtblock = start - i + 1; |
| return 0; |
| } |
| i = bit - firstbit + 1; |
| /* |
| * Go on to previous block if that's where the previous word is |
| * and we need the previous word. |
| */ |
| if (--word == -1 && i < len) { |
| /* |
| * If done with this block, get the previous one. |
| */ |
| xfs_trans_brelse(tp, bp); |
| error = xfs_rtbuf_get(mp, tp, --block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = XFS_BLOCKWMASK(mp); |
| b = &bufp[word]; |
| } else { |
| /* |
| * Go on to the previous word in the buffer. |
| */ |
| b--; |
| } |
| } else { |
| /* |
| * Starting on a word boundary, no partial word. |
| */ |
| i = 0; |
| } |
| /* |
| * Loop over whole words in buffers. When we use up one buffer |
| * we move on to the previous one. |
| */ |
| while (len - i >= XFS_NBWORD) { |
| /* |
| * Compute difference between actual and desired value. |
| */ |
| if ((wdiff = *b ^ want)) { |
| /* |
| * Different, mark where we are and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i += XFS_NBWORD - 1 - XFS_RTHIBIT(wdiff); |
| *rtblock = start - i + 1; |
| return 0; |
| } |
| i += XFS_NBWORD; |
| /* |
| * Go on to previous block if that's where the previous word is |
| * and we need the previous word. |
| */ |
| if (--word == -1 && i < len) { |
| /* |
| * If done with this block, get the previous one. |
| */ |
| xfs_trans_brelse(tp, bp); |
| error = xfs_rtbuf_get(mp, tp, --block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = XFS_BLOCKWMASK(mp); |
| b = &bufp[word]; |
| } else { |
| /* |
| * Go on to the previous word in the buffer. |
| */ |
| b--; |
| } |
| } |
| /* |
| * If not ending on a word boundary, deal with the last |
| * (partial) word. |
| */ |
| if (len - i) { |
| /* |
| * Calculate first (leftmost) bit number to look at, |
| * and mask for all the relevant bits in this word. |
| */ |
| firstbit = XFS_NBWORD - (len - i); |
| mask = (((xfs_rtword_t)1 << (len - i)) - 1) << firstbit; |
| /* |
| * Compute difference between actual and desired value. |
| */ |
| if ((wdiff = (*b ^ want) & mask)) { |
| /* |
| * Different, mark where we are and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i += XFS_NBWORD - 1 - XFS_RTHIBIT(wdiff); |
| *rtblock = start - i + 1; |
| return 0; |
| } else |
| i = len; |
| } |
| /* |
| * No match, return that we scanned the whole area. |
| */ |
| xfs_trans_brelse(tp, bp); |
| *rtblock = start - i + 1; |
| return 0; |
| } |
| |
| /* |
| * Searching forward from start to limit, find the first block whose |
| * allocated/free state is different from start's. |
| */ |
| STATIC int /* error */ |
| xfs_rtfind_forw( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t start, /* starting block to look at */ |
| xfs_rtblock_t limit, /* last block to look at */ |
| xfs_rtblock_t *rtblock) /* out: start block found */ |
| { |
| xfs_rtword_t *b; /* current word in buffer */ |
| int bit; /* bit number in the word */ |
| xfs_rtblock_t block; /* bitmap block number */ |
| xfs_buf_t *bp; /* buf for the block */ |
| xfs_rtword_t *bufp; /* starting word in buffer */ |
| int error; /* error value */ |
| xfs_rtblock_t i; /* current bit number rel. to start */ |
| xfs_rtblock_t lastbit; /* last useful bit in the word */ |
| xfs_rtblock_t len; /* length of inspected area */ |
| xfs_rtword_t mask; /* mask of relevant bits for value */ |
| xfs_rtword_t want; /* mask for "good" values */ |
| xfs_rtword_t wdiff; /* difference from wanted value */ |
| int word; /* word number in the buffer */ |
| |
| /* |
| * Compute and read in starting bitmap block for starting block. |
| */ |
| block = XFS_BITTOBLOCK(mp, start); |
| error = xfs_rtbuf_get(mp, tp, block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| /* |
| * Get the first word's index & point to it. |
| */ |
| word = XFS_BITTOWORD(mp, start); |
| b = &bufp[word]; |
| bit = (int)(start & (XFS_NBWORD - 1)); |
| len = limit - start + 1; |
| /* |
| * Compute match value, based on the bit at start: if 1 (free) |
| * then all-ones, else all-zeroes. |
| */ |
| want = (*b & ((xfs_rtword_t)1 << bit)) ? -1 : 0; |
| /* |
| * If the starting position is not word-aligned, deal with the |
| * partial word. |
| */ |
| if (bit) { |
| /* |
| * Calculate last (rightmost) bit number to look at, |
| * and mask for all the relevant bits in this word. |
| */ |
| lastbit = XFS_RTMIN(bit + len, XFS_NBWORD); |
| mask = (((xfs_rtword_t)1 << (lastbit - bit)) - 1) << bit; |
| /* |
| * Calculate the difference between the value there |
| * and what we're looking for. |
| */ |
| if ((wdiff = (*b ^ want) & mask)) { |
| /* |
| * Different. Mark where we are and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i = XFS_RTLOBIT(wdiff) - bit; |
| *rtblock = start + i - 1; |
| return 0; |
| } |
| i = lastbit - bit; |
| /* |
| * Go on to next block if that's where the next word is |
| * and we need the next word. |
| */ |
| if (++word == XFS_BLOCKWSIZE(mp) && i < len) { |
| /* |
| * If done with this block, get the previous one. |
| */ |
| xfs_trans_brelse(tp, bp); |
| error = xfs_rtbuf_get(mp, tp, ++block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = 0; |
| } else { |
| /* |
| * Go on to the previous word in the buffer. |
| */ |
| b++; |
| } |
| } else { |
| /* |
| * Starting on a word boundary, no partial word. |
| */ |
| i = 0; |
| } |
| /* |
| * Loop over whole words in buffers. When we use up one buffer |
| * we move on to the next one. |
| */ |
| while (len - i >= XFS_NBWORD) { |
| /* |
| * Compute difference between actual and desired value. |
| */ |
| if ((wdiff = *b ^ want)) { |
| /* |
| * Different, mark where we are and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i += XFS_RTLOBIT(wdiff); |
| *rtblock = start + i - 1; |
| return 0; |
| } |
| i += XFS_NBWORD; |
| /* |
| * Go on to next block if that's where the next word is |
| * and we need the next word. |
| */ |
| if (++word == XFS_BLOCKWSIZE(mp) && i < len) { |
| /* |
| * If done with this block, get the next one. |
| */ |
| xfs_trans_brelse(tp, bp); |
| error = xfs_rtbuf_get(mp, tp, ++block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = 0; |
| } else { |
| /* |
| * Go on to the next word in the buffer. |
| */ |
| b++; |
| } |
| } |
| /* |
| * If not ending on a word boundary, deal with the last |
| * (partial) word. |
| */ |
| if ((lastbit = len - i)) { |
| /* |
| * Calculate mask for all the relevant bits in this word. |
| */ |
| mask = ((xfs_rtword_t)1 << lastbit) - 1; |
| /* |
| * Compute difference between actual and desired value. |
| */ |
| if ((wdiff = (*b ^ want) & mask)) { |
| /* |
| * Different, mark where we are and return. |
| */ |
| xfs_trans_brelse(tp, bp); |
| i += XFS_RTLOBIT(wdiff); |
| *rtblock = start + i - 1; |
| return 0; |
| } else |
| i = len; |
| } |
| /* |
| * No match, return that we scanned the whole area. |
| */ |
| xfs_trans_brelse(tp, bp); |
| *rtblock = start + i - 1; |
| return 0; |
| } |
| |
| /* |
| * Mark an extent specified by start and len freed. |
| * Updates all the summary information as well as the bitmap. |
| */ |
| STATIC int /* error */ |
| xfs_rtfree_range( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t start, /* starting block to free */ |
| xfs_extlen_t len, /* length to free */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb) /* in/out: summary block number */ |
| { |
| xfs_rtblock_t end; /* end of the freed extent */ |
| int error; /* error value */ |
| xfs_rtblock_t postblock; /* first block freed > end */ |
| xfs_rtblock_t preblock; /* first block freed < start */ |
| |
| end = start + len - 1; |
| /* |
| * Modify the bitmap to mark this extent freed. |
| */ |
| error = xfs_rtmodify_range(mp, tp, start, len, 1); |
| if (error) { |
| return error; |
| } |
| /* |
| * Assume we're freeing out of the middle of an allocated extent. |
| * We need to find the beginning and end of the extent so we can |
| * properly update the summary. |
| */ |
| error = xfs_rtfind_back(mp, tp, start, 0, &preblock); |
| if (error) { |
| return error; |
| } |
| /* |
| * Find the next allocated block (end of allocated extent). |
| */ |
| error = xfs_rtfind_forw(mp, tp, end, mp->m_sb.sb_rextents - 1, |
| &postblock); |
| /* |
| * If there are blocks not being freed at the front of the |
| * old extent, add summary data for them to be allocated. |
| */ |
| if (preblock < start) { |
| error = xfs_rtmodify_summary(mp, tp, |
| XFS_RTBLOCKLOG(start - preblock), |
| XFS_BITTOBLOCK(mp, preblock), -1, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| } |
| /* |
| * If there are blocks not being freed at the end of the |
| * old extent, add summary data for them to be allocated. |
| */ |
| if (postblock > end) { |
| error = xfs_rtmodify_summary(mp, tp, |
| XFS_RTBLOCKLOG(postblock - end), |
| XFS_BITTOBLOCK(mp, end + 1), -1, rbpp, rsb); |
| if (error) { |
| return error; |
| } |
| } |
| /* |
| * Increment the summary information corresponding to the entire |
| * (new) free extent. |
| */ |
| error = xfs_rtmodify_summary(mp, tp, |
| XFS_RTBLOCKLOG(postblock + 1 - preblock), |
| XFS_BITTOBLOCK(mp, preblock), 1, rbpp, rsb); |
| return error; |
| } |
| |
| /* |
| * Read and return the summary information for a given extent size, |
| * bitmap block combination. |
| * Keeps track of a current summary block, so we don't keep reading |
| * it from the buffer cache. |
| */ |
| STATIC int /* error */ |
| xfs_rtget_summary( |
| xfs_mount_t *mp, /* file system mount structure */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| int log, /* log2 of extent size */ |
| xfs_rtblock_t bbno, /* bitmap block number */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb, /* in/out: summary block number */ |
| xfs_suminfo_t *sum) /* out: summary info for this block */ |
| { |
| xfs_buf_t *bp; /* buffer for summary block */ |
| int error; /* error value */ |
| xfs_fsblock_t sb; /* summary fsblock */ |
| int so; /* index into the summary file */ |
| xfs_suminfo_t *sp; /* pointer to returned data */ |
| |
| /* |
| * Compute entry number in the summary file. |
| */ |
| so = XFS_SUMOFFS(mp, log, bbno); |
| /* |
| * Compute the block number in the summary file. |
| */ |
| sb = XFS_SUMOFFSTOBLOCK(mp, so); |
| /* |
| * If we have an old buffer, and the block number matches, use that. |
| */ |
| if (rbpp && *rbpp && *rsb == sb) |
| bp = *rbpp; |
| /* |
| * Otherwise we have to get the buffer. |
| */ |
| else { |
| /* |
| * If there was an old one, get rid of it first. |
| */ |
| if (rbpp && *rbpp) |
| xfs_trans_brelse(tp, *rbpp); |
| error = xfs_rtbuf_get(mp, tp, sb, 1, &bp); |
| if (error) { |
| return error; |
| } |
| /* |
| * Remember this buffer and block for the next call. |
| */ |
| if (rbpp) { |
| *rbpp = bp; |
| *rsb = sb; |
| } |
| } |
| /* |
| * Point to the summary information & copy it out. |
| */ |
| sp = XFS_SUMPTR(mp, bp, so); |
| *sum = *sp; |
| /* |
| * Drop the buffer if we're not asked to remember it. |
| */ |
| if (!rbpp) |
| xfs_trans_brelse(tp, bp); |
| return 0; |
| } |
| |
| /* |
| * Set the given range of bitmap bits to the given value. |
| * Do whatever I/O and logging is required. |
| */ |
| STATIC int /* error */ |
| xfs_rtmodify_range( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t start, /* starting block to modify */ |
| xfs_extlen_t len, /* length of extent to modify */ |
| int val) /* 1 for free, 0 for allocated */ |
| { |
| xfs_rtword_t *b; /* current word in buffer */ |
| int bit; /* bit number in the word */ |
| xfs_rtblock_t block; /* bitmap block number */ |
| xfs_buf_t *bp; /* buf for the block */ |
| xfs_rtword_t *bufp; /* starting word in buffer */ |
| int error; /* error value */ |
| xfs_rtword_t *first; /* first used word in the buffer */ |
| int i; /* current bit number rel. to start */ |
| int lastbit; /* last useful bit in word */ |
| xfs_rtword_t mask; /* mask o frelevant bits for value */ |
| int word; /* word number in the buffer */ |
| |
| /* |
| * Compute starting bitmap block number. |
| */ |
| block = XFS_BITTOBLOCK(mp, start); |
| /* |
| * Read the bitmap block, and point to its data. |
| */ |
| error = xfs_rtbuf_get(mp, tp, block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| /* |
| * Compute the starting word's address, and starting bit. |
| */ |
| word = XFS_BITTOWORD(mp, start); |
| first = b = &bufp[word]; |
| bit = (int)(start & (XFS_NBWORD - 1)); |
| /* |
| * 0 (allocated) => all zeroes; 1 (free) => all ones. |
| */ |
| val = -val; |
| /* |
| * If not starting on a word boundary, deal with the first |
| * (partial) word. |
| */ |
| if (bit) { |
| /* |
| * Compute first bit not changed and mask of relevant bits. |
| */ |
| lastbit = XFS_RTMIN(bit + len, XFS_NBWORD); |
| mask = (((xfs_rtword_t)1 << (lastbit - bit)) - 1) << bit; |
| /* |
| * Set/clear the active bits. |
| */ |
| if (val) |
| *b |= mask; |
| else |
| *b &= ~mask; |
| i = lastbit - bit; |
| /* |
| * Go on to the next block if that's where the next word is |
| * and we need the next word. |
| */ |
| if (++word == XFS_BLOCKWSIZE(mp) && i < len) { |
| /* |
| * Log the changed part of this block. |
| * Get the next one. |
| */ |
| xfs_trans_log_buf(tp, bp, |
| (uint)((char *)first - (char *)bufp), |
| (uint)((char *)b - (char *)bufp)); |
| error = xfs_rtbuf_get(mp, tp, ++block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| first = b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = 0; |
| } else { |
| /* |
| * Go on to the next word in the buffer |
| */ |
| b++; |
| } |
| } else { |
| /* |
| * Starting on a word boundary, no partial word. |
| */ |
| i = 0; |
| } |
| /* |
| * Loop over whole words in buffers. When we use up one buffer |
| * we move on to the next one. |
| */ |
| while (len - i >= XFS_NBWORD) { |
| /* |
| * Set the word value correctly. |
| */ |
| *b = val; |
| i += XFS_NBWORD; |
| /* |
| * Go on to the next block if that's where the next word is |
| * and we need the next word. |
| */ |
| if (++word == XFS_BLOCKWSIZE(mp) && i < len) { |
| /* |
| * Log the changed part of this block. |
| * Get the next one. |
| */ |
| xfs_trans_log_buf(tp, bp, |
| (uint)((char *)first - (char *)bufp), |
| (uint)((char *)b - (char *)bufp)); |
| error = xfs_rtbuf_get(mp, tp, ++block, 0, &bp); |
| if (error) { |
| return error; |
| } |
| first = b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); |
| word = 0; |
| } else { |
| /* |
| * Go on to the next word in the buffer |
| */ |
| b++; |
| } |
| } |
| /* |
| * If not ending on a word boundary, deal with the last |
| * (partial) word. |
| */ |
| if ((lastbit = len - i)) { |
| /* |
| * Compute a mask of relevant bits. |
| */ |
| bit = 0; |
| mask = ((xfs_rtword_t)1 << lastbit) - 1; |
| /* |
| * Set/clear the active bits. |
| */ |
| if (val) |
| *b |= mask; |
| else |
| *b &= ~mask; |
| b++; |
| } |
| /* |
| * Log any remaining changed bytes. |
| */ |
| if (b > first) |
| xfs_trans_log_buf(tp, bp, (uint)((char *)first - (char *)bufp), |
| (uint)((char *)b - (char *)bufp - 1)); |
| return 0; |
| } |
| |
| /* |
| * Read and modify the summary information for a given extent size, |
| * bitmap block combination. |
| * Keeps track of a current summary block, so we don't keep reading |
| * it from the buffer cache. |
| */ |
| STATIC int /* error */ |
| xfs_rtmodify_summary( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| int log, /* log2 of extent size */ |
| xfs_rtblock_t bbno, /* bitmap block number */ |
| int delta, /* change to make to summary info */ |
| xfs_buf_t **rbpp, /* in/out: summary block buffer */ |
| xfs_fsblock_t *rsb) /* in/out: summary block number */ |
| { |
| xfs_buf_t *bp; /* buffer for the summary block */ |
| int error; /* error value */ |
| xfs_fsblock_t sb; /* summary fsblock */ |
| int so; /* index into the summary file */ |
| xfs_suminfo_t *sp; /* pointer to returned data */ |
| |
| /* |
| * Compute entry number in the summary file. |
| */ |
| so = XFS_SUMOFFS(mp, log, bbno); |
| /* |
| * Compute the block number in the summary file. |
| */ |
| sb = XFS_SUMOFFSTOBLOCK(mp, so); |
| /* |
| * If we have an old buffer, and the block number matches, use that. |
| */ |
| if (rbpp && *rbpp && *rsb == sb) |
| bp = *rbpp; |
| /* |
| * Otherwise we have to get the buffer. |
| */ |
| else { |
| /* |
| * If there was an old one, get rid of it first. |
| */ |
| if (rbpp && *rbpp) |
| xfs_trans_brelse(tp, *rbpp); |
| error = xfs_rtbuf_get(mp, tp, sb, 1, &bp); |
| if (error) { |
| return error; |
| } |
| /* |
| * Remember this buffer and block for the next call. |
| */ |
| if (rbpp) { |
| *rbpp = bp; |
| *rsb = sb; |
| } |
| } |
| /* |
| * Point to the summary information, modify and log it. |
| */ |
| sp = XFS_SUMPTR(mp, bp, so); |
| *sp += delta; |
| xfs_trans_log_buf(tp, bp, (uint)((char *)sp - (char *)XFS_BUF_PTR(bp)), |
| (uint)((char *)sp - (char *)XFS_BUF_PTR(bp) + sizeof(*sp) - 1)); |
| return 0; |
| } |
| |
| /* |
| * Visible (exported) functions. |
| */ |
| |
| /* |
| * Grow the realtime area of the filesystem. |
| */ |
| int |
| xfs_growfs_rt( |
| xfs_mount_t *mp, /* mount point for filesystem */ |
| xfs_growfs_rt_t *in) /* growfs rt input struct */ |
| { |
| xfs_rtblock_t bmbno; /* bitmap block number */ |
| xfs_buf_t *bp; /* temporary buffer */ |
| int cancelflags; /* flags for xfs_trans_cancel */ |
| int error; /* error return value */ |
| xfs_inode_t *ip; /* bitmap inode, used as lock */ |
| xfs_mount_t *nmp; /* new (fake) mount structure */ |
| xfs_drfsbno_t nrblocks; /* new number of realtime blocks */ |
| xfs_extlen_t nrbmblocks; /* new number of rt bitmap blocks */ |
| xfs_drtbno_t nrextents; /* new number of realtime extents */ |
| uint8_t nrextslog; /* new log2 of sb_rextents */ |
| xfs_extlen_t nrsumblocks; /* new number of summary blocks */ |
| uint nrsumlevels; /* new rt summary levels */ |
| uint nrsumsize; /* new size of rt summary, bytes */ |
| xfs_sb_t *nsbp; /* new superblock */ |
| xfs_extlen_t rbmblocks; /* current number of rt bitmap blocks */ |
| xfs_extlen_t rsumblocks; /* current number of rt summary blks */ |
| xfs_sb_t *sbp; /* old superblock */ |
| xfs_fsblock_t sumbno; /* summary block number */ |
| xfs_trans_t *tp; /* transaction pointer */ |
| |
| sbp = &mp->m_sb; |
| /* |
| * Initial error checking. |
| */ |
| if (mp->m_rtdev_targp == NULL || mp->m_rbmip == NULL || |
| (nrblocks = in->newblocks) <= sbp->sb_rblocks || |
| (sbp->sb_rblocks && (in->extsize != sbp->sb_rextsize))) |
| return XFS_ERROR(EINVAL); |
| /* |
| * Read in the last block of the device, make sure it exists. |
| */ |
| error = xfs_read_buf(mp, mp->m_rtdev_targp, |
| XFS_FSB_TO_BB(mp, in->newblocks - 1), |
| XFS_FSB_TO_BB(mp, 1), 0, &bp); |
| if (error) |
| return error; |
| ASSERT(bp); |
| xfs_buf_relse(bp); |
| /* |
| * Calculate new parameters. These are the final values to be reached. |
| */ |
| nrextents = nrblocks; |
| do_div(nrextents, in->extsize); |
| nrbmblocks = howmany_64(nrextents, NBBY * sbp->sb_blocksize); |
| nrextslog = xfs_highbit32(nrextents); |
| nrsumlevels = nrextslog + 1; |
| nrsumsize = (uint)sizeof(xfs_suminfo_t) * nrsumlevels * nrbmblocks; |
| nrsumblocks = XFS_B_TO_FSB(mp, nrsumsize); |
| nrsumsize = XFS_FSB_TO_B(mp, nrsumblocks); |
| /* |
| * New summary size can't be more than half the size of |
| * the log. This prevents us from getting a log overflow, |
| * since we'll log basically the whole summary file at once. |
| */ |
| if (nrsumblocks > (mp->m_sb.sb_logblocks >> 1)) |
| return XFS_ERROR(EINVAL); |
| /* |
| * Get the old block counts for bitmap and summary inodes. |
| * These can't change since other growfs callers are locked out. |
| */ |
| rbmblocks = XFS_B_TO_FSB(mp, mp->m_rbmip->i_d.di_size); |
| rsumblocks = XFS_B_TO_FSB(mp, mp->m_rsumip->i_d.di_size); |
| /* |
| * Allocate space to the bitmap and summary files, as necessary. |
| */ |
| if ((error = xfs_growfs_rt_alloc(mp, rbmblocks, nrbmblocks, |
| mp->m_sb.sb_rbmino))) |
| return error; |
| if ((error = xfs_growfs_rt_alloc(mp, rsumblocks, nrsumblocks, |
| mp->m_sb.sb_rsumino))) |
| return error; |
| /* |
| * Allocate a new (fake) mount/sb. |
| */ |
| nmp = kmem_alloc(sizeof(*nmp), KM_SLEEP); |
| /* |
| * Loop over the bitmap blocks. |
| * We will do everything one bitmap block at a time. |
| * Skip the current block if it is exactly full. |
| * This also deals with the case where there were no rtextents before. |
| */ |
| for (bmbno = sbp->sb_rbmblocks - |
| ((sbp->sb_rextents & ((1 << mp->m_blkbit_log) - 1)) != 0); |
| bmbno < nrbmblocks; |
| bmbno++) { |
| *nmp = *mp; |
| nsbp = &nmp->m_sb; |
| /* |
| * Calculate new sb and mount fields for this round. |
| */ |
| nsbp->sb_rextsize = in->extsize; |
| nsbp->sb_rbmblocks = bmbno + 1; |
| nsbp->sb_rblocks = |
| XFS_RTMIN(nrblocks, |
| nsbp->sb_rbmblocks * NBBY * |
| nsbp->sb_blocksize * nsbp->sb_rextsize); |
| nsbp->sb_rextents = nsbp->sb_rblocks; |
| do_div(nsbp->sb_rextents, nsbp->sb_rextsize); |
| nsbp->sb_rextslog = xfs_highbit32(nsbp->sb_rextents); |
| nrsumlevels = nmp->m_rsumlevels = nsbp->sb_rextslog + 1; |
| nrsumsize = |
| (uint)sizeof(xfs_suminfo_t) * nrsumlevels * |
| nsbp->sb_rbmblocks; |
| nrsumblocks = XFS_B_TO_FSB(mp, nrsumsize); |
| nmp->m_rsumsize = nrsumsize = XFS_FSB_TO_B(mp, nrsumblocks); |
| /* |
| * Start a transaction, get the log reservation. |
| */ |
| tp = xfs_trans_alloc(mp, XFS_TRANS_GROWFSRT_FREE); |
| cancelflags = 0; |
| if ((error = xfs_trans_reserve(tp, 0, |
| XFS_GROWRTFREE_LOG_RES(nmp), 0, 0, 0))) |
| break; |
| /* |
| * Lock out other callers by grabbing the bitmap inode lock. |
| */ |
| if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, |
| XFS_ILOCK_EXCL, &ip))) |
| break; |
| ASSERT(ip == mp->m_rbmip); |
| /* |
| * Update the bitmap inode's size. |
| */ |
| mp->m_rbmip->i_d.di_size = |
| nsbp->sb_rbmblocks * nsbp->sb_blocksize; |
| xfs_trans_log_inode(tp, mp->m_rbmip, XFS_ILOG_CORE); |
| cancelflags |= XFS_TRANS_ABORT; |
| /* |
| * Get the summary inode into the transaction. |
| */ |
| if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino, 0, |
| XFS_ILOCK_EXCL, &ip))) |
| break; |
| ASSERT(ip == mp->m_rsumip); |
| /* |
| * Update the summary inode's size. |
| */ |
| mp->m_rsumip->i_d.di_size = nmp->m_rsumsize; |
| xfs_trans_log_inode(tp, mp->m_rsumip, XFS_ILOG_CORE); |
| /* |
| * Copy summary data from old to new sizes. |
| * Do this when the real size (not block-aligned) changes. |
| */ |
| if (sbp->sb_rbmblocks != nsbp->sb_rbmblocks || |
| mp->m_rsumlevels != nmp->m_rsumlevels) { |
| error = xfs_rtcopy_summary(mp, nmp, tp); |
| if (error) |
| break; |
| } |
| /* |
| * Update superblock fields. |
| */ |
| if (nsbp->sb_rextsize != sbp->sb_rextsize) |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_REXTSIZE, |
| nsbp->sb_rextsize - sbp->sb_rextsize); |
| if (nsbp->sb_rbmblocks != sbp->sb_rbmblocks) |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_RBMBLOCKS, |
| nsbp->sb_rbmblocks - sbp->sb_rbmblocks); |
| if (nsbp->sb_rblocks != sbp->sb_rblocks) |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_RBLOCKS, |
| nsbp->sb_rblocks - sbp->sb_rblocks); |
| if (nsbp->sb_rextents != sbp->sb_rextents) |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_REXTENTS, |
| nsbp->sb_rextents - sbp->sb_rextents); |
| if (nsbp->sb_rextslog != sbp->sb_rextslog) |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_REXTSLOG, |
| nsbp->sb_rextslog - sbp->sb_rextslog); |
| /* |
| * Free new extent. |
| */ |
| bp = NULL; |
| error = xfs_rtfree_range(nmp, tp, sbp->sb_rextents, |
| nsbp->sb_rextents - sbp->sb_rextents, &bp, &sumbno); |
| if (error) |
| break; |
| /* |
| * Mark more blocks free in the superblock. |
| */ |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_FREXTENTS, |
| nsbp->sb_rextents - sbp->sb_rextents); |
| /* |
| * Update mp values into the real mp structure. |
| */ |
| mp->m_rsumlevels = nrsumlevels; |
| mp->m_rsumsize = nrsumsize; |
| /* |
| * Commit the transaction. |
| */ |
| xfs_trans_commit(tp, 0); |
| } |
| |
| if (error) |
| xfs_trans_cancel(tp, cancelflags); |
| |
| /* |
| * Free the fake mp structure. |
| */ |
| kmem_free(nmp, sizeof(*nmp)); |
| |
| return error; |
| } |
| |
| /* |
| * Allocate an extent in the realtime subvolume, with the usual allocation |
| * parameters. The length units are all in realtime extents, as is the |
| * result block number. |
| */ |
| int /* error */ |
| xfs_rtallocate_extent( |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t bno, /* starting block number to allocate */ |
| xfs_extlen_t minlen, /* minimum length to allocate */ |
| xfs_extlen_t maxlen, /* maximum length to allocate */ |
| xfs_extlen_t *len, /* out: actual length allocated */ |
| xfs_alloctype_t type, /* allocation type XFS_ALLOCTYPE... */ |
| int wasdel, /* was a delayed allocation extent */ |
| xfs_extlen_t prod, /* extent product factor */ |
| xfs_rtblock_t *rtblock) /* out: start block allocated */ |
| { |
| int error; /* error value */ |
| xfs_inode_t *ip; /* inode for bitmap file */ |
| xfs_mount_t *mp; /* file system mount structure */ |
| xfs_rtblock_t r; /* result allocated block */ |
| xfs_fsblock_t sb; /* summary file block number */ |
| xfs_buf_t *sumbp; /* summary file block buffer */ |
| |
| ASSERT(minlen > 0 && minlen <= maxlen); |
| mp = tp->t_mountp; |
| /* |
| * If prod is set then figure out what to do to minlen and maxlen. |
| */ |
| if (prod > 1) { |
| xfs_extlen_t i; |
| |
| if ((i = maxlen % prod)) |
| maxlen -= i; |
| if ((i = minlen % prod)) |
| minlen += prod - i; |
| if (maxlen < minlen) { |
| *rtblock = NULLRTBLOCK; |
| return 0; |
| } |
| } |
| /* |
| * Lock out other callers by grabbing the bitmap inode lock. |
| */ |
| if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, |
| XFS_ILOCK_EXCL, &ip))) |
| return error; |
| sumbp = NULL; |
| /* |
| * Allocate by size, or near another block, or exactly at some block. |
| */ |
| switch (type) { |
| case XFS_ALLOCTYPE_ANY_AG: |
| error = xfs_rtallocate_extent_size(mp, tp, minlen, maxlen, len, |
| &sumbp, &sb, prod, &r); |
| break; |
| case XFS_ALLOCTYPE_NEAR_BNO: |
| error = xfs_rtallocate_extent_near(mp, tp, bno, minlen, maxlen, |
| len, &sumbp, &sb, prod, &r); |
| break; |
| case XFS_ALLOCTYPE_THIS_BNO: |
| error = xfs_rtallocate_extent_exact(mp, tp, bno, minlen, maxlen, |
| len, &sumbp, &sb, prod, &r); |
| break; |
| default: |
| ASSERT(0); |
| } |
| if (error) { |
| return error; |
| } |
| /* |
| * If it worked, update the superblock. |
| */ |
| if (r != NULLRTBLOCK) { |
| long slen = (long)*len; |
| |
| ASSERT(*len >= minlen && *len <= maxlen); |
| if (wasdel) |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_RES_FREXTENTS, -slen); |
| else |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_FREXTENTS, -slen); |
| } |
| *rtblock = r; |
| return 0; |
| } |
| |
| /* |
| * Free an extent in the realtime subvolume. Length is expressed in |
| * realtime extents, as is the block number. |
| */ |
| int /* error */ |
| xfs_rtfree_extent( |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_rtblock_t bno, /* starting block number to free */ |
| xfs_extlen_t len) /* length of extent freed */ |
| { |
| int error; /* error value */ |
| xfs_inode_t *ip; /* bitmap file inode */ |
| xfs_mount_t *mp; /* file system mount structure */ |
| xfs_fsblock_t sb; /* summary file block number */ |
| xfs_buf_t *sumbp; /* summary file block buffer */ |
| |
| mp = tp->t_mountp; |
| /* |
| * Synchronize by locking the bitmap inode. |
| */ |
| if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, |
| XFS_ILOCK_EXCL, &ip))) |
| return error; |
| #if defined(__KERNEL__) && defined(DEBUG) |
| /* |
| * Check to see that this whole range is currently allocated. |
| */ |
| { |
| int stat; /* result from checking range */ |
| |
| error = xfs_rtcheck_alloc_range(mp, tp, bno, len, &stat); |
| if (error) { |
| return error; |
| } |
| ASSERT(stat); |
| } |
| #endif |
| sumbp = NULL; |
| /* |
| * Free the range of realtime blocks. |
| */ |
| error = xfs_rtfree_range(mp, tp, bno, len, &sumbp, &sb); |
| if (error) { |
| return error; |
| } |
| /* |
| * Mark more blocks free in the superblock. |
| */ |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_FREXTENTS, (long)len); |
| /* |
| * If we've now freed all the blocks, reset the file sequence |
| * number to 0. |
| */ |
| if (tp->t_frextents_delta + mp->m_sb.sb_frextents == |
| mp->m_sb.sb_rextents) { |
| if (!(ip->i_d.di_flags & XFS_DIFLAG_NEWRTBM)) |
| ip->i_d.di_flags |= XFS_DIFLAG_NEWRTBM; |
| *(__uint64_t *)&ip->i_d.di_atime = 0; |
| xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); |
| } |
| return 0; |
| } |
| |
| /* |
| * Initialize realtime fields in the mount structure. |
| */ |
| int /* error */ |
| xfs_rtmount_init( |
| xfs_mount_t *mp) /* file system mount structure */ |
| { |
| xfs_buf_t *bp; /* buffer for last block of subvolume */ |
| xfs_daddr_t d; /* address of last block of subvolume */ |
| int error; /* error return value */ |
| xfs_sb_t *sbp; /* filesystem superblock copy in mount */ |
| |
| sbp = &mp->m_sb; |
| if (sbp->sb_rblocks == 0) |
| return 0; |
| if (mp->m_rtdev_targp == NULL) { |
| cmn_err(CE_WARN, |
| "XFS: This filesystem has a realtime volume, use rtdev=device option"); |
| return XFS_ERROR(ENODEV); |
| } |
| mp->m_rsumlevels = sbp->sb_rextslog + 1; |
| mp->m_rsumsize = |
| (uint)sizeof(xfs_suminfo_t) * mp->m_rsumlevels * |
| sbp->sb_rbmblocks; |
| mp->m_rsumsize = roundup(mp->m_rsumsize, sbp->sb_blocksize); |
| mp->m_rbmip = mp->m_rsumip = NULL; |
| /* |
| * Check that the realtime section is an ok size. |
| */ |
| d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_rblocks); |
| if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_rblocks) { |
| cmn_err(CE_WARN, "XFS: realtime mount -- %llu != %llu", |
| (unsigned long long) XFS_BB_TO_FSB(mp, d), |
| (unsigned long long) mp->m_sb.sb_rblocks); |
| return XFS_ERROR(E2BIG); |
| } |
| error = xfs_read_buf(mp, mp->m_rtdev_targp, |
| d - XFS_FSB_TO_BB(mp, 1), |
| XFS_FSB_TO_BB(mp, 1), 0, &bp); |
| if (error) { |
| cmn_err(CE_WARN, |
| "XFS: realtime mount -- xfs_read_buf failed, returned %d", error); |
| if (error == ENOSPC) |
| return XFS_ERROR(E2BIG); |
| return error; |
| } |
| xfs_buf_relse(bp); |
| return 0; |
| } |
| |
| /* |
| * Get the bitmap and summary inodes into the mount structure |
| * at mount time. |
| */ |
| int /* error */ |
| xfs_rtmount_inodes( |
| xfs_mount_t *mp) /* file system mount structure */ |
| { |
| int error; /* error return value */ |
| xfs_sb_t *sbp; |
| |
| sbp = &mp->m_sb; |
| if (sbp->sb_rbmino == NULLFSINO) |
| return 0; |
| error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip, 0); |
| if (error) |
| return error; |
| ASSERT(mp->m_rbmip != NULL); |
| ASSERT(sbp->sb_rsumino != NULLFSINO); |
| error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip, 0); |
| if (error) { |
| VN_RELE(XFS_ITOV(mp->m_rbmip)); |
| return error; |
| } |
| ASSERT(mp->m_rsumip != NULL); |
| return 0; |
| } |
| |
| /* |
| * Pick an extent for allocation at the start of a new realtime file. |
| * Use the sequence number stored in the atime field of the bitmap inode. |
| * Translate this to a fraction of the rtextents, and return the product |
| * of rtextents and the fraction. |
| * The fraction sequence is 0, 1/2, 1/4, 3/4, 1/8, ..., 7/8, 1/16, ... |
| */ |
| int /* error */ |
| xfs_rtpick_extent( |
| xfs_mount_t *mp, /* file system mount point */ |
| xfs_trans_t *tp, /* transaction pointer */ |
| xfs_extlen_t len, /* allocation length (rtextents) */ |
| xfs_rtblock_t *pick) /* result rt extent */ |
| { |
| xfs_rtblock_t b; /* result block */ |
| int error; /* error return value */ |
| xfs_inode_t *ip; /* bitmap incore inode */ |
| int log2; /* log of sequence number */ |
| __uint64_t resid; /* residual after log removed */ |
| __uint64_t seq; /* sequence number of file creation */ |
| __uint64_t *seqp; /* pointer to seqno in inode */ |
| |
| if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, |
| XFS_ILOCK_EXCL, &ip))) |
| return error; |
| ASSERT(ip == mp->m_rbmip); |
| seqp = (__uint64_t *)&ip->i_d.di_atime; |
| if (!(ip->i_d.di_flags & XFS_DIFLAG_NEWRTBM)) { |
| ip->i_d.di_flags |= XFS_DIFLAG_NEWRTBM; |
| *seqp = 0; |
| } |
| seq = *seqp; |
| if ((log2 = xfs_highbit64(seq)) == -1) |
| b = 0; |
| else { |
| resid = seq - (1ULL << log2); |
| b = (mp->m_sb.sb_rextents * ((resid << 1) + 1ULL)) >> |
| (log2 + 1); |
| if (b >= mp->m_sb.sb_rextents) |
| b = do_mod(b, mp->m_sb.sb_rextents); |
| if (b + len > mp->m_sb.sb_rextents) |
| b = mp->m_sb.sb_rextents - len; |
| } |
| *seqp = seq + 1; |
| xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); |
| *pick = b; |
| return 0; |
| } |