blob: 44ca7b1d8b8aaba6558f5ee6d8504f82265cc156 [file] [log] [blame]
/*
* arch/arm/mach-tegra/include/mach/debug-macro.S
*
* Copyright (C) 2010,2011 Google, Inc.
* Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
* Doug Anderson <dianders@chromium.org>
* Stephen Warren <swarren@nvidia.com>
*
* Portions based on mach-omap2's debug-macro.S
* Copyright (C) 1994-1999 Russell King
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/serial_reg.h>
#include "../../iomap.h"
#include "../../irammap.h"
.macro addruart, rp, rv, tmp
adr \rp, 99f @ actual addr of 99f
ldr \rv, [\rp] @ linked addr is stored there
sub \rv, \rv, \rp @ offset between the two
ldr \rp, [\rp, #4] @ linked tegra_uart_config
sub \tmp, \rp, \rv @ actual tegra_uart_config
ldr \rp, [\tmp] @ Load tegra_uart_config
cmp \rp, #1 @ needs intitialization?
bne 100f @ no; go load the addresses
mov \rv, #0 @ yes; record init is done
str \rv, [\tmp]
mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM
ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
cmp \rv, \rp @ Cookie present?
bne 100f @ No, use default UART
mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM
ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
str \rv, [\tmp, #4] @ Store in tegra_uart_phys
sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address
add \rv, \rv, #IO_APB_VIRT
str \rv, [\tmp, #8] @ Store in tegra_uart_virt
b 100f
.align
99: .word .
.word tegra_uart_config
.ltorg
100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
.endm
#define UART_SHIFT 2
/*
* Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
* check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
* We use the fact that all 5 valid UART addresses all have something in the
* 2nd-to-lowest byte.
*/
.macro senduart, rd, rx
tst \rx, #0x0000ff00
strneb \rd, [\rx, #UART_TX << UART_SHIFT]
1001:
.endm
.macro busyuart, rd, rx
tst \rx, #0x0000ff00
beq 1002f
1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
bne 1001b
1002:
.endm
.macro waituart, rd, rx
#ifdef FLOW_CONTROL
tst \rx, #0x0000ff00
beq 1002f
1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
tst \rd, #UART_MSR_CTS
beq 1001b
1002:
#endif
.endm