drivers/s390/crypto/ap_bus.h - kernel/msm-4.9 - Gitiles

 /*
  * linux/drivers/s390/crypto/ap_bus.h
  *
  * Copyright (C) 2006 IBM Corporation
  * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
  *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  *	      Ralph Wuerthner <rwuerthn@de.ibm.com>
  *	      Felix Beck <felix.beck@de.ibm.com>
  *
  * Adjunct processor bus header file.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2, or (at your option)
  * any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #ifndef _AP_BUS_H_
 #define _AP_BUS_H_

 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/types.h>

 #define AP_DEVICES 64		/* Number of AP devices. */
 #define AP_DOMAINS 16		/* Number of AP domains. */
 #define AP_MAX_RESET 90		/* Maximum number of resets. */
 #define AP_RESET_TIMEOUT (HZ/2)	/* Time in ticks for reset timeouts. */
 #define AP_CONFIG_TIME 30	/* Time in seconds between AP bus rescans. */
 #define AP_POLL_TIME 1		/* Time in ticks between receive polls. */

 extern int ap_domain_index;

 /**
  * The ap_qid_t identifier of an ap queue. It contains a
  * 6 bit device index and a 4 bit queue index (domain).
  */
 typedef unsigned int ap_qid_t;

 #define AP_MKQID(_device,_queue) (((_device) & 63) << 8 | ((_queue) & 15))
 #define AP_QID_DEVICE(_qid) (((_qid) >> 8) & 63)
 #define AP_QID_QUEUE(_qid) ((_qid) & 15)

 /**
  * structy ap_queue_status - Holds the AP queue status.
  * @queue_empty: Shows if queue is empty
  * @replies_waiting: Waiting replies
  * @queue_full: Is 1 if the queue is full
  * @pad: A 4 bit pad
  * @int_enabled: Shows if interrupts are enabled for the AP
  * @response_conde: Holds the 8 bit response code
  * @pad2: A 16 bit pad
  *
  * The ap queue status word is returned by all three AP functions
  * (PQAP, NQAP and DQAP).  There's a set of flags in the first
  * byte, followed by a 1 byte response code.
  */
 struct ap_queue_status {
 	unsigned int queue_empty	: 1;
 	unsigned int replies_waiting	: 1;
 	unsigned int queue_full		: 1;
 	unsigned int pad1		: 4;
 	unsigned int int_enabled	: 1;
 	unsigned int response_code	: 8;
 	unsigned int pad2		: 16;
 };

 #define AP_RESPONSE_NORMAL		0x00
 #define AP_RESPONSE_Q_NOT_AVAIL		0x01
 #define AP_RESPONSE_RESET_IN_PROGRESS	0x02
 #define AP_RESPONSE_DECONFIGURED	0x03
 #define AP_RESPONSE_CHECKSTOPPED	0x04
 #define AP_RESPONSE_BUSY		0x05
 #define AP_RESPONSE_INVALID_ADDRESS	0x06
 #define AP_RESPONSE_OTHERWISE_CHANGED	0x07
 #define AP_RESPONSE_Q_FULL		0x10
 #define AP_RESPONSE_NO_PENDING_REPLY	0x10
 #define AP_RESPONSE_INDEX_TOO_BIG	0x11
 #define AP_RESPONSE_NO_FIRST_PART	0x13
 #define AP_RESPONSE_MESSAGE_TOO_BIG	0x15
 #define AP_RESPONSE_REQ_FAC_NOT_INST	0x16

 /*
  * Known device types
  */
 #define AP_DEVICE_TYPE_PCICC	3
 #define AP_DEVICE_TYPE_PCICA	4
 #define AP_DEVICE_TYPE_PCIXCC	5
 #define AP_DEVICE_TYPE_CEX2A	6
 #define AP_DEVICE_TYPE_CEX2C	7
 #define AP_DEVICE_TYPE_CEX3A	8
 #define AP_DEVICE_TYPE_CEX3C	9

 /*
  * AP reset flag states
  */
 #define AP_RESET_IGNORE	0	/* request timeout will be ignored */
 #define AP_RESET_ARMED	1	/* request timeout timer is active */
 #define AP_RESET_DO	2	/* AP reset required */

 struct ap_device;
 struct ap_message;

 struct ap_driver {
 	struct device_driver driver;
 	struct ap_device_id *ids;

 	int (*probe)(struct ap_device *);
 	void (*remove)(struct ap_device *);
 	/* receive is called from tasklet context */
 	void (*receive)(struct ap_device *, struct ap_message *,
 			struct ap_message *);
 	int request_timeout;		/* request timeout in jiffies */
 };

 #define to_ap_drv(x) container_of((x), struct ap_driver, driver)

 int ap_driver_register(struct ap_driver *, struct module *, char *);
 void ap_driver_unregister(struct ap_driver *);

 struct ap_device {
 	struct device device;
 	struct ap_driver *drv;		/* Pointer to AP device driver. */
 	spinlock_t lock;		/* Per device lock. */
 	struct list_head list;		/* private list of all AP devices. */

 	ap_qid_t qid;			/* AP queue id. */
 	int queue_depth;		/* AP queue depth.*/
 	int device_type;		/* AP device type. */
 	int unregistered;		/* marks AP device as unregistered */
 	struct timer_list timeout;	/* Timer for request timeouts. */
 	int reset;			/* Reset required after req. timeout. */

 	int queue_count;		/* # messages currently on AP queue. */

 	struct list_head pendingq;	/* List of message sent to AP queue. */
 	int pendingq_count;		/* # requests on pendingq list. */
 	struct list_head requestq;	/* List of message yet to be sent. */
 	int requestq_count;		/* # requests on requestq list. */
 	int total_request_count;	/* # requests ever for this AP device. */

 	struct ap_message *reply;	/* Per device reply message. */

 	void *private;			/* ap driver private pointer. */
 };

 #define to_ap_dev(x) container_of((x), struct ap_device, device)

 struct ap_message {
 	struct list_head list;		/* Request queueing. */
 	unsigned long long psmid;	/* Message id. */
 	void *message;			/* Pointer to message buffer. */
 	size_t length;			/* Message length. */

 	void *private;			/* ap driver private pointer. */
 	unsigned int special:1;		/* Used for special commands. */
 };

 #define AP_DEVICE(dt)					\
 	.dev_type=(dt),					\
 	.match_flags=AP_DEVICE_ID_MATCH_DEVICE_TYPE,

 /**
  * ap_init_message() - Initialize ap_message.
  * Initialize a message before using. Otherwise this might result in
  * unexpected behaviour.
  */
 static inline void ap_init_message(struct ap_message *ap_msg)
 {
 	ap_msg->psmid = 0;
 	ap_msg->length = 0;
 	ap_msg->special = 0;
 }

 /*
  * Note: don't use ap_send/ap_recv after using ap_queue_message
  * for the first time. Otherwise the ap message queue will get
  * confused.
  */
 int ap_send(ap_qid_t, unsigned long long, void *, size_t);
 int ap_recv(ap_qid_t, unsigned long long *, void *, size_t);

 void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg);
 void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg);
 void ap_flush_queue(struct ap_device *ap_dev);

 int ap_module_init(void);
 void ap_module_exit(void);

 #endif /* _AP_BUS_H_ */
	/*
	* linux/drivers/s390/crypto/ap_bus.h
	*
	* Copyright (C) 2006 IBM Corporation
	* Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
	* Martin Schwidefsky <schwidefsky@de.ibm.com>
	* Ralph Wuerthner <rwuerthn@de.ibm.com>
	* Felix Beck <felix.beck@de.ibm.com>
	*
	* Adjunct processor bus header file.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2, or (at your option)
	* any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#ifndef _AP_BUS_H_
	#define _AP_BUS_H_

	#include <linux/device.h>
	#include <linux/mod_devicetable.h>
	#include <linux/types.h>

	#define AP_DEVICES 64 /* Number of AP devices. */
	#define AP_DOMAINS 16 /* Number of AP domains. */
	#define AP_MAX_RESET 90 /* Maximum number of resets. */
	#define AP_RESET_TIMEOUT (HZ/2) /* Time in ticks for reset timeouts. */
	#define AP_CONFIG_TIME 30 /* Time in seconds between AP bus rescans. */
	#define AP_POLL_TIME 1 /* Time in ticks between receive polls. */

	extern int ap_domain_index;

	/**
	* The ap_qid_t identifier of an ap queue. It contains a
	* 6 bit device index and a 4 bit queue index (domain).
	*/
	typedef unsigned int ap_qid_t;

	#define AP_MKQID(_device,_queue) (((_device) & 63) << 8 \| ((_queue) & 15))
	#define AP_QID_DEVICE(_qid) (((_qid) >> 8) & 63)
	#define AP_QID_QUEUE(_qid) ((_qid) & 15)

	/**
	* structy ap_queue_status - Holds the AP queue status.
	* @queue_empty: Shows if queue is empty
	* @replies_waiting: Waiting replies
	* @queue_full: Is 1 if the queue is full
	* @pad: A 4 bit pad
	* @int_enabled: Shows if interrupts are enabled for the AP
	* @response_conde: Holds the 8 bit response code
	* @pad2: A 16 bit pad
	*
	* The ap queue status word is returned by all three AP functions
	* (PQAP, NQAP and DQAP). There's a set of flags in the first
	* byte, followed by a 1 byte response code.
	*/
	struct ap_queue_status {
	unsigned int queue_empty : 1;
	unsigned int replies_waiting : 1;
	unsigned int queue_full : 1;
	unsigned int pad1 : 4;
	unsigned int int_enabled : 1;
	unsigned int response_code : 8;
	unsigned int pad2 : 16;
	};

	#define AP_RESPONSE_NORMAL 0x00
	#define AP_RESPONSE_Q_NOT_AVAIL 0x01
	#define AP_RESPONSE_RESET_IN_PROGRESS 0x02
	#define AP_RESPONSE_DECONFIGURED 0x03
	#define AP_RESPONSE_CHECKSTOPPED 0x04
	#define AP_RESPONSE_BUSY 0x05
	#define AP_RESPONSE_INVALID_ADDRESS 0x06
	#define AP_RESPONSE_OTHERWISE_CHANGED 0x07
	#define AP_RESPONSE_Q_FULL 0x10
	#define AP_RESPONSE_NO_PENDING_REPLY 0x10
	#define AP_RESPONSE_INDEX_TOO_BIG 0x11
	#define AP_RESPONSE_NO_FIRST_PART 0x13
	#define AP_RESPONSE_MESSAGE_TOO_BIG 0x15
	#define AP_RESPONSE_REQ_FAC_NOT_INST 0x16

	/*
	* Known device types
	*/
	#define AP_DEVICE_TYPE_PCICC 3
	#define AP_DEVICE_TYPE_PCICA 4
	#define AP_DEVICE_TYPE_PCIXCC 5
	#define AP_DEVICE_TYPE_CEX2A 6
	#define AP_DEVICE_TYPE_CEX2C 7
	#define AP_DEVICE_TYPE_CEX3A 8
	#define AP_DEVICE_TYPE_CEX3C 9

	/*
	* AP reset flag states
	*/
	#define AP_RESET_IGNORE 0 /* request timeout will be ignored */
	#define AP_RESET_ARMED 1 /* request timeout timer is active */
	#define AP_RESET_DO 2 /* AP reset required */

	struct ap_device;
	struct ap_message;

	struct ap_driver {
	struct device_driver driver;
	struct ap_device_id *ids;

	int (probe)(struct ap_device );
	void (remove)(struct ap_device );
	/* receive is called from tasklet context */
	void (receive)(struct ap_device , struct ap_message *,
	struct ap_message *);
	int request_timeout; /* request timeout in jiffies */
	};

	#define to_ap_drv(x) container_of((x), struct ap_driver, driver)

	int ap_driver_register(struct ap_driver , struct module , char *);
	void ap_driver_unregister(struct ap_driver *);

	struct ap_device {
	struct device device;
	struct ap_driver drv; / Pointer to AP device driver. */
	spinlock_t lock; /* Per device lock. */
	struct list_head list; /* private list of all AP devices. */

	ap_qid_t qid; /* AP queue id. */
	int queue_depth; /* AP queue depth.*/
	int device_type; /* AP device type. */
	int unregistered; /* marks AP device as unregistered */
	struct timer_list timeout; /* Timer for request timeouts. */
	int reset; /* Reset required after req. timeout. */

	int queue_count; /* # messages currently on AP queue. */

	struct list_head pendingq; /* List of message sent to AP queue. */
	int pendingq_count; /* # requests on pendingq list. */
	struct list_head requestq; /* List of message yet to be sent. */
	int requestq_count; /* # requests on requestq list. */
	int total_request_count; /* # requests ever for this AP device. */

	struct ap_message reply; / Per device reply message. */

	void private; / ap driver private pointer. */
	};

	#define to_ap_dev(x) container_of((x), struct ap_device, device)

	struct ap_message {
	struct list_head list; /* Request queueing. */
	unsigned long long psmid; /* Message id. */
	void message; / Pointer to message buffer. */
	size_t length; /* Message length. */

	void private; / ap driver private pointer. */
	unsigned int special:1; /* Used for special commands. */
	};

	#define AP_DEVICE(dt) \
	.dev_type=(dt), \
	.match_flags=AP_DEVICE_ID_MATCH_DEVICE_TYPE,

	/**
	* ap_init_message() - Initialize ap_message.
	* Initialize a message before using. Otherwise this might result in
	* unexpected behaviour.
	*/
	static inline void ap_init_message(struct ap_message *ap_msg)
	{
	ap_msg->psmid = 0;
	ap_msg->length = 0;
	ap_msg->special = 0;
	}

	/*
	* Note: don't use ap_send/ap_recv after using ap_queue_message
	* for the first time. Otherwise the ap message queue will get
	* confused.
	*/
	int ap_send(ap_qid_t, unsigned long long, void *, size_t);
	int ap_recv(ap_qid_t, unsigned long long , void , size_t);

	void ap_queue_message(struct ap_device ap_dev, struct ap_message ap_msg);
	void ap_cancel_message(struct ap_device ap_dev, struct ap_message ap_msg);
	void ap_flush_queue(struct ap_device *ap_dev);

	int ap_module_init(void);
	void ap_module_exit(void);

	#endif /* _AP_BUS_H_ */