| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * arch/sh64/mm/init.c |
| * |
| * Copyright (C) 2000, 2001 Paolo Alberelli |
| * Copyright (C) 2003, 2004 Paul Mundt |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/rwsem.h> |
| #include <linux/mm.h> |
| #include <linux/swap.h> |
| #include <linux/bootmem.h> |
| |
| #include <asm/mmu_context.h> |
| #include <asm/page.h> |
| #include <asm/pgalloc.h> |
| #include <asm/pgtable.h> |
| #include <asm/tlb.h> |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| #include <linux/blk.h> |
| #endif |
| |
| DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); |
| |
| /* |
| * Cache of MMU context last used. |
| */ |
| unsigned long mmu_context_cache; |
| pgd_t * mmu_pdtp_cache; |
| int after_bootmem = 0; |
| |
| /* |
| * BAD_PAGE is the page that is used for page faults when linux |
| * is out-of-memory. Older versions of linux just did a |
| * do_exit(), but using this instead means there is less risk |
| * for a process dying in kernel mode, possibly leaving an inode |
| * unused etc.. |
| * |
| * BAD_PAGETABLE is the accompanying page-table: it is initialized |
| * to point to BAD_PAGE entries. |
| * |
| * ZERO_PAGE is a special page that is used for zero-initialized |
| * data and COW. |
| */ |
| |
| extern unsigned char empty_zero_page[PAGE_SIZE]; |
| extern unsigned char empty_bad_page[PAGE_SIZE]; |
| extern pte_t empty_bad_pte_table[PTRS_PER_PTE]; |
| extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; |
| |
| extern char _text, _etext, _edata, __bss_start, _end; |
| extern char __init_begin, __init_end; |
| |
| /* It'd be good if these lines were in the standard header file. */ |
| #define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) |
| #define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) |
| |
| |
| void show_mem(void) |
| { |
| int i, total = 0, reserved = 0; |
| int shared = 0, cached = 0; |
| |
| printk("Mem-info:\n"); |
| show_free_areas(); |
| printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10)); |
| i = max_mapnr; |
| while (i-- > 0) { |
| total++; |
| if (PageReserved(mem_map+i)) |
| reserved++; |
| else if (PageSwapCache(mem_map+i)) |
| cached++; |
| else if (page_count(mem_map+i)) |
| shared += page_count(mem_map+i) - 1; |
| } |
| printk("%d pages of RAM\n",total); |
| printk("%d reserved pages\n",reserved); |
| printk("%d pages shared\n",shared); |
| printk("%d pages swap cached\n",cached); |
| printk("%ld pages in page table cache\n", quicklist_total_size()); |
| } |
| |
| /* |
| * paging_init() sets up the page tables. |
| * |
| * head.S already did a lot to set up address translation for the kernel. |
| * Here we comes with: |
| * . MMU enabled |
| * . ASID set (SR) |
| * . some 512MB regions being mapped of which the most relevant here is: |
| * . CACHED segment (ASID 0 [irrelevant], shared AND NOT user) |
| * . possible variable length regions being mapped as: |
| * . UNCACHED segment (ASID 0 [irrelevant], shared AND NOT user) |
| * . All of the memory regions are placed, independently from the platform |
| * on high addresses, above 0x80000000. |
| * . swapper_pg_dir is already cleared out by the .space directive |
| * in any case swapper does not require a real page directory since |
| * it's all kernel contained. |
| * |
| * Those pesky NULL-reference errors in the kernel are then |
| * dealt with by not mapping address 0x00000000 at all. |
| * |
| */ |
| void __init paging_init(void) |
| { |
| unsigned long zones_size[MAX_NR_ZONES] = {0, }; |
| |
| pgd_init((unsigned long)swapper_pg_dir); |
| pgd_init((unsigned long)swapper_pg_dir + |
| sizeof(pgd_t) * USER_PTRS_PER_PGD); |
| |
| mmu_context_cache = MMU_CONTEXT_FIRST_VERSION; |
| |
| zones_size[ZONE_NORMAL] = MAX_LOW_PFN - START_PFN; |
| NODE_DATA(0)->node_mem_map = NULL; |
| free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); |
| } |
| |
| void __init mem_init(void) |
| { |
| int codesize, reservedpages, datasize, initsize; |
| int tmp; |
| |
| max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN; |
| high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE); |
| |
| /* |
| * Clear the zero-page. |
| * This is not required but we might want to re-use |
| * this very page to pass boot parameters, one day. |
| */ |
| memset(empty_zero_page, 0, PAGE_SIZE); |
| |
| /* this will put all low memory onto the freelists */ |
| totalram_pages += free_all_bootmem_node(NODE_DATA(0)); |
| reservedpages = 0; |
| for (tmp = 0; tmp < num_physpages; tmp++) |
| /* |
| * Only count reserved RAM pages |
| */ |
| if (PageReserved(mem_map+tmp)) |
| reservedpages++; |
| |
| after_bootmem = 1; |
| |
| codesize = (unsigned long) &_etext - (unsigned long) &_text; |
| datasize = (unsigned long) &_edata - (unsigned long) &_etext; |
| initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; |
| |
| printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n", |
| (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), |
| max_mapnr << (PAGE_SHIFT-10), |
| codesize >> 10, |
| reservedpages << (PAGE_SHIFT-10), |
| datasize >> 10, |
| initsize >> 10); |
| } |
| |
| void free_initmem(void) |
| { |
| unsigned long addr; |
| |
| addr = (unsigned long)(&__init_begin); |
| for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { |
| ClearPageReserved(virt_to_page(addr)); |
| init_page_count(virt_to_page(addr)); |
| free_page(addr); |
| totalram_pages++; |
| } |
| printk ("Freeing unused kernel memory: %ldk freed\n", (&__init_end - &__init_begin) >> 10); |
| } |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| void free_initrd_mem(unsigned long start, unsigned long end) |
| { |
| unsigned long p; |
| for (p = start; p < end; p += PAGE_SIZE) { |
| ClearPageReserved(virt_to_page(p)); |
| init_page_count(virt_to_page(p)); |
| free_page(p); |
| totalram_pages++; |
| } |
| printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); |
| } |
| #endif |
| |