| /* NXP PCF50633 PMIC Driver |
| * |
| * (C) 2006-2008 by Openmoko, Inc. |
| * Author: Balaji Rao <balajirrao@openmoko.org> |
| * All rights reserved. |
| * |
| * Broken down from monstrous PCF50633 driver mainly by |
| * Harald Welte and Andy Green and Werner Almesberger |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/mfd/pcf50633/core.h> |
| #include <linux/mfd/pcf50633/pmic.h> |
| |
| #define PCF50633_REGULATOR(_name, _id) \ |
| { \ |
| .name = _name, \ |
| .id = _id, \ |
| .ops = &pcf50633_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = { |
| [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, |
| [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT, |
| [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT, |
| [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT, |
| [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT, |
| [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT, |
| [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT, |
| [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT, |
| [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT, |
| [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT, |
| [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT, |
| }; |
| |
| /* Bits from voltage value */ |
| static u8 auto_voltage_bits(unsigned int millivolts) |
| { |
| if (millivolts < 1800) |
| return 0; |
| if (millivolts > 3800) |
| return 0xff; |
| |
| millivolts -= 625; |
| |
| return millivolts / 25; |
| } |
| |
| static u8 down_voltage_bits(unsigned int millivolts) |
| { |
| if (millivolts < 625) |
| return 0; |
| else if (millivolts > 3000) |
| return 0xff; |
| |
| millivolts -= 625; |
| |
| return millivolts / 25; |
| } |
| |
| static u8 ldo_voltage_bits(unsigned int millivolts) |
| { |
| if (millivolts < 900) |
| return 0; |
| else if (millivolts > 3600) |
| return 0x1f; |
| |
| millivolts -= 900; |
| return millivolts / 100; |
| } |
| |
| /* Obtain voltage value from bits */ |
| static unsigned int auto_voltage_value(u8 bits) |
| { |
| if (bits < 0x2f) |
| return 0; |
| |
| return 625 + (bits * 25); |
| } |
| |
| |
| static unsigned int down_voltage_value(u8 bits) |
| { |
| return 625 + (bits * 25); |
| } |
| |
| |
| static unsigned int ldo_voltage_value(u8 bits) |
| { |
| bits &= 0x1f; |
| |
| return 900 + (bits * 100); |
| } |
| |
| static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| struct pcf50633 *pcf; |
| int regulator_id, millivolts; |
| u8 volt_bits, regnr; |
| |
| pcf = rdev_get_drvdata(rdev); |
| |
| regulator_id = rdev_get_id(rdev); |
| if (regulator_id >= PCF50633_NUM_REGULATORS) |
| return -EINVAL; |
| |
| millivolts = min_uV / 1000; |
| |
| regnr = pcf50633_regulator_registers[regulator_id]; |
| |
| switch (regulator_id) { |
| case PCF50633_REGULATOR_AUTO: |
| volt_bits = auto_voltage_bits(millivolts); |
| break; |
| case PCF50633_REGULATOR_DOWN1: |
| volt_bits = down_voltage_bits(millivolts); |
| break; |
| case PCF50633_REGULATOR_DOWN2: |
| volt_bits = down_voltage_bits(millivolts); |
| break; |
| case PCF50633_REGULATOR_LDO1: |
| case PCF50633_REGULATOR_LDO2: |
| case PCF50633_REGULATOR_LDO3: |
| case PCF50633_REGULATOR_LDO4: |
| case PCF50633_REGULATOR_LDO5: |
| case PCF50633_REGULATOR_LDO6: |
| case PCF50633_REGULATOR_HCLDO: |
| volt_bits = ldo_voltage_bits(millivolts); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return pcf50633_reg_write(pcf, regnr, volt_bits); |
| } |
| |
| static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev) |
| { |
| struct pcf50633 *pcf; |
| int regulator_id, millivolts, volt_bits; |
| u8 regnr; |
| |
| pcf = rdev_get_drvdata(rdev);; |
| |
| regulator_id = rdev_get_id(rdev); |
| if (regulator_id >= PCF50633_NUM_REGULATORS) |
| return -EINVAL; |
| |
| regnr = pcf50633_regulator_registers[regulator_id]; |
| |
| volt_bits = pcf50633_reg_read(pcf, regnr); |
| if (volt_bits < 0) |
| return -1; |
| |
| switch (regulator_id) { |
| case PCF50633_REGULATOR_AUTO: |
| millivolts = auto_voltage_value(volt_bits); |
| break; |
| case PCF50633_REGULATOR_DOWN1: |
| millivolts = down_voltage_value(volt_bits); |
| break; |
| case PCF50633_REGULATOR_DOWN2: |
| millivolts = down_voltage_value(volt_bits); |
| break; |
| case PCF50633_REGULATOR_LDO1: |
| case PCF50633_REGULATOR_LDO2: |
| case PCF50633_REGULATOR_LDO3: |
| case PCF50633_REGULATOR_LDO4: |
| case PCF50633_REGULATOR_LDO5: |
| case PCF50633_REGULATOR_LDO6: |
| case PCF50633_REGULATOR_HCLDO: |
| millivolts = ldo_voltage_value(volt_bits); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return millivolts * 1000; |
| } |
| |
| static int pcf50633_regulator_enable(struct regulator_dev *rdev) |
| { |
| struct pcf50633 *pcf = rdev_get_drvdata(rdev); |
| int regulator_id; |
| u8 regnr; |
| |
| regulator_id = rdev_get_id(rdev); |
| if (regulator_id >= PCF50633_NUM_REGULATORS) |
| return -EINVAL; |
| |
| /* The *ENA register is always one after the *OUT register */ |
| regnr = pcf50633_regulator_registers[regulator_id] + 1; |
| |
| return pcf50633_reg_set_bit_mask(pcf, regnr, PCF50633_REGULATOR_ON, |
| PCF50633_REGULATOR_ON); |
| } |
| |
| static int pcf50633_regulator_disable(struct regulator_dev *rdev) |
| { |
| struct pcf50633 *pcf = rdev_get_drvdata(rdev); |
| int regulator_id; |
| u8 regnr; |
| |
| regulator_id = rdev_get_id(rdev); |
| if (regulator_id >= PCF50633_NUM_REGULATORS) |
| return -EINVAL; |
| |
| /* the *ENA register is always one after the *OUT register */ |
| regnr = pcf50633_regulator_registers[regulator_id] + 1; |
| |
| return pcf50633_reg_set_bit_mask(pcf, regnr, |
| PCF50633_REGULATOR_ON, 0); |
| } |
| |
| static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev) |
| { |
| struct pcf50633 *pcf = rdev_get_drvdata(rdev); |
| int regulator_id = rdev_get_id(rdev); |
| u8 regnr; |
| |
| regulator_id = rdev_get_id(rdev); |
| if (regulator_id >= PCF50633_NUM_REGULATORS) |
| return -EINVAL; |
| |
| /* the *ENA register is always one after the *OUT register */ |
| regnr = pcf50633_regulator_registers[regulator_id] + 1; |
| |
| return pcf50633_reg_read(pcf, regnr) & PCF50633_REGULATOR_ON; |
| } |
| |
| static struct regulator_ops pcf50633_regulator_ops = { |
| .set_voltage = pcf50633_regulator_set_voltage, |
| .get_voltage = pcf50633_regulator_get_voltage, |
| .enable = pcf50633_regulator_enable, |
| .disable = pcf50633_regulator_disable, |
| .is_enabled = pcf50633_regulator_is_enabled, |
| }; |
| |
| static struct regulator_desc regulators[] = { |
| [PCF50633_REGULATOR_AUTO] = |
| PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO), |
| [PCF50633_REGULATOR_DOWN1] = |
| PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1), |
| [PCF50633_REGULATOR_DOWN2] = |
| PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2), |
| [PCF50633_REGULATOR_LDO1] = |
| PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1), |
| [PCF50633_REGULATOR_LDO2] = |
| PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2), |
| [PCF50633_REGULATOR_LDO3] = |
| PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3), |
| [PCF50633_REGULATOR_LDO4] = |
| PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4), |
| [PCF50633_REGULATOR_LDO5] = |
| PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5), |
| [PCF50633_REGULATOR_LDO6] = |
| PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6), |
| [PCF50633_REGULATOR_HCLDO] = |
| PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO), |
| [PCF50633_REGULATOR_MEMLDO] = |
| PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO), |
| }; |
| |
| static int __devinit pcf50633_regulator_probe(struct platform_device *pdev) |
| { |
| struct regulator_dev *rdev; |
| struct pcf50633 *pcf; |
| |
| /* Already set by core driver */ |
| pcf = platform_get_drvdata(pdev); |
| |
| rdev = regulator_register(®ulators[pdev->id], &pdev->dev, |
| pdev->dev.platform_data, pcf); |
| if (IS_ERR(rdev)) |
| return PTR_ERR(rdev); |
| |
| if (pcf->pdata->regulator_registered) |
| pcf->pdata->regulator_registered(pcf, pdev->id); |
| |
| return 0; |
| } |
| |
| static int __devexit pcf50633_regulator_remove(struct platform_device *pdev) |
| { |
| struct regulator_dev *rdev = platform_get_drvdata(pdev); |
| |
| regulator_unregister(rdev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pcf50633_regulator_driver = { |
| .driver = { |
| .name = "pcf50633-regltr", |
| }, |
| .probe = pcf50633_regulator_probe, |
| .remove = __devexit_p(pcf50633_regulator_remove), |
| }; |
| |
| static int __init pcf50633_regulator_init(void) |
| { |
| return platform_driver_register(&pcf50633_regulator_driver); |
| } |
| module_init(pcf50633_regulator_init); |
| |
| static void __exit pcf50633_regulator_exit(void) |
| { |
| platform_driver_unregister(&pcf50633_regulator_driver); |
| } |
| module_exit(pcf50633_regulator_exit); |
| |
| MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>"); |
| MODULE_DESCRIPTION("PCF50633 regulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pcf50633-regulator"); |