| /* linux/arch/arm/plat-s3c64xx/clock.c |
| * |
| * Copyright 2008 Openmoko, Inc. |
| * Copyright 2008 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * http://armlinux.simtec.co.uk/ |
| * |
| * S3C64XX Base clock support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/map.h> |
| |
| #include <mach/regs-sys.h> |
| #include <mach/regs-clock.h> |
| |
| #include <plat/cpu.h> |
| #include <plat/devs.h> |
| #include <plat/cpu-freq.h> |
| #include <plat/clock.h> |
| #include <plat/clock-clksrc.h> |
| #include <plat/pll.h> |
| |
| /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call |
| * ext_xtal_mux for want of an actual name from the manual. |
| */ |
| |
| static struct clk clk_ext_xtal_mux = { |
| .name = "ext_xtal", |
| }; |
| |
| #define clk_fin_apll clk_ext_xtal_mux |
| #define clk_fin_mpll clk_ext_xtal_mux |
| #define clk_fin_epll clk_ext_xtal_mux |
| |
| #define clk_fout_mpll clk_mpll |
| #define clk_fout_epll clk_epll |
| |
| struct clk clk_h2 = { |
| .name = "hclk2", |
| .rate = 0, |
| }; |
| |
| struct clk clk_27m = { |
| .name = "clk_27m", |
| .rate = 27000000, |
| }; |
| |
| static int clk_48m_ctrl(struct clk *clk, int enable) |
| { |
| unsigned long flags; |
| u32 val; |
| |
| /* can't rely on clock lock, this register has other usages */ |
| local_irq_save(flags); |
| |
| val = __raw_readl(S3C64XX_OTHERS); |
| if (enable) |
| val |= S3C64XX_OTHERS_USBMASK; |
| else |
| val &= ~S3C64XX_OTHERS_USBMASK; |
| |
| __raw_writel(val, S3C64XX_OTHERS); |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| struct clk clk_48m = { |
| .name = "clk_48m", |
| .rate = 48000000, |
| .enable = clk_48m_ctrl, |
| }; |
| |
| struct clk clk_xusbxti = { |
| .name = "xusbxti", |
| .rate = 48000000, |
| }; |
| |
| static int inline s3c64xx_gate(void __iomem *reg, |
| struct clk *clk, |
| int enable) |
| { |
| unsigned int ctrlbit = clk->ctrlbit; |
| u32 con; |
| |
| con = __raw_readl(reg); |
| |
| if (enable) |
| con |= ctrlbit; |
| else |
| con &= ~ctrlbit; |
| |
| __raw_writel(con, reg); |
| return 0; |
| } |
| |
| static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) |
| { |
| return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); |
| } |
| |
| static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) |
| { |
| return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); |
| } |
| |
| int s3c64xx_sclk_ctrl(struct clk *clk, int enable) |
| { |
| return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); |
| } |
| |
| static struct clk init_clocks_off[] = { |
| { |
| .name = "nand", |
| .parent = &clk_h, |
| }, { |
| .name = "rtc", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_RTC, |
| }, { |
| .name = "adc", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_TSADC, |
| }, { |
| .name = "i2c", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_IIC, |
| }, { |
| .name = "i2c", |
| .devname = "s3c2440-i2c.1", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C6410_CLKCON_PCLK_I2C1, |
| }, { |
| .name = "iis", |
| .devname = "samsung-i2s.0", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_IIS0, |
| }, { |
| .name = "iis", |
| .devname = "samsung-i2s.1", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_IIS1, |
| }, { |
| #ifdef CONFIG_CPU_S3C6410 |
| .name = "iis", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, |
| }, { |
| #endif |
| .name = "keypad", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, |
| }, { |
| .name = "spi", |
| .devname = "s3c64xx-spi.0", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_SPI0, |
| }, { |
| .name = "spi", |
| .devname = "s3c64xx-spi.1", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_SPI1, |
| }, { |
| .name = "48m", |
| .devname = "s3c-sdhci.0", |
| .parent = &clk_48m, |
| .enable = s3c64xx_sclk_ctrl, |
| .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, |
| }, { |
| .name = "48m", |
| .devname = "s3c-sdhci.1", |
| .parent = &clk_48m, |
| .enable = s3c64xx_sclk_ctrl, |
| .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, |
| }, { |
| .name = "48m", |
| .devname = "s3c-sdhci.2", |
| .parent = &clk_48m, |
| .enable = s3c64xx_sclk_ctrl, |
| .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, |
| }, { |
| .name = "ac97", |
| .parent = &clk_p, |
| .ctrlbit = S3C_CLKCON_PCLK_AC97, |
| }, { |
| .name = "cfcon", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_IHOST, |
| }, { |
| .name = "dma0", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_DMA0, |
| }, { |
| .name = "dma1", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_DMA1, |
| }, |
| }; |
| |
| static struct clk clk_48m_spi0 = { |
| .name = "spi_48m", |
| .devname = "s3c64xx-spi.0", |
| .parent = &clk_48m, |
| .enable = s3c64xx_sclk_ctrl, |
| .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, |
| }; |
| |
| static struct clk clk_48m_spi1 = { |
| .name = "spi_48m", |
| .devname = "s3c64xx-spi.1", |
| .parent = &clk_48m, |
| .enable = s3c64xx_sclk_ctrl, |
| .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, |
| }; |
| |
| static struct clk init_clocks[] = { |
| { |
| .name = "lcd", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_LCD, |
| }, { |
| .name = "gpio", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_GPIO, |
| }, { |
| .name = "usb-host", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_UHOST, |
| }, { |
| .name = "otg", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_USB, |
| }, { |
| .name = "timers", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_PWM, |
| }, { |
| .name = "uart", |
| .devname = "s3c6400-uart.0", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_UART0, |
| }, { |
| .name = "uart", |
| .devname = "s3c6400-uart.1", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_UART1, |
| }, { |
| .name = "uart", |
| .devname = "s3c6400-uart.2", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_UART2, |
| }, { |
| .name = "uart", |
| .devname = "s3c6400-uart.3", |
| .parent = &clk_p, |
| .enable = s3c64xx_pclk_ctrl, |
| .ctrlbit = S3C_CLKCON_PCLK_UART3, |
| }, { |
| .name = "watchdog", |
| .parent = &clk_p, |
| .ctrlbit = S3C_CLKCON_PCLK_WDT, |
| }, |
| }; |
| |
| static struct clk clk_hsmmc0 = { |
| .name = "hsmmc", |
| .devname = "s3c-sdhci.0", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, |
| }; |
| |
| static struct clk clk_hsmmc1 = { |
| .name = "hsmmc", |
| .devname = "s3c-sdhci.1", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, |
| }; |
| |
| static struct clk clk_hsmmc2 = { |
| .name = "hsmmc", |
| .devname = "s3c-sdhci.2", |
| .parent = &clk_h, |
| .enable = s3c64xx_hclk_ctrl, |
| .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, |
| }; |
| |
| static struct clk clk_fout_apll = { |
| .name = "fout_apll", |
| }; |
| |
| static struct clk *clk_src_apll_list[] = { |
| [0] = &clk_fin_apll, |
| [1] = &clk_fout_apll, |
| }; |
| |
| static struct clksrc_sources clk_src_apll = { |
| .sources = clk_src_apll_list, |
| .nr_sources = ARRAY_SIZE(clk_src_apll_list), |
| }; |
| |
| static struct clksrc_clk clk_mout_apll = { |
| .clk = { |
| .name = "mout_apll", |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, |
| .sources = &clk_src_apll, |
| }; |
| |
| static struct clk *clk_src_epll_list[] = { |
| [0] = &clk_fin_epll, |
| [1] = &clk_fout_epll, |
| }; |
| |
| static struct clksrc_sources clk_src_epll = { |
| .sources = clk_src_epll_list, |
| .nr_sources = ARRAY_SIZE(clk_src_epll_list), |
| }; |
| |
| static struct clksrc_clk clk_mout_epll = { |
| .clk = { |
| .name = "mout_epll", |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, |
| .sources = &clk_src_epll, |
| }; |
| |
| static struct clk *clk_src_mpll_list[] = { |
| [0] = &clk_fin_mpll, |
| [1] = &clk_fout_mpll, |
| }; |
| |
| static struct clksrc_sources clk_src_mpll = { |
| .sources = clk_src_mpll_list, |
| .nr_sources = ARRAY_SIZE(clk_src_mpll_list), |
| }; |
| |
| static struct clksrc_clk clk_mout_mpll = { |
| .clk = { |
| .name = "mout_mpll", |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, |
| .sources = &clk_src_mpll, |
| }; |
| |
| static unsigned int armclk_mask; |
| |
| static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) |
| { |
| unsigned long rate = clk_get_rate(clk->parent); |
| u32 clkdiv; |
| |
| /* divisor mask starts at bit0, so no need to shift */ |
| clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; |
| |
| return rate / (clkdiv + 1); |
| } |
| |
| static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, |
| unsigned long rate) |
| { |
| unsigned long parent = clk_get_rate(clk->parent); |
| u32 div; |
| |
| if (parent < rate) |
| return parent; |
| |
| div = (parent / rate) - 1; |
| if (div > armclk_mask) |
| div = armclk_mask; |
| |
| return parent / (div + 1); |
| } |
| |
| static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned long parent = clk_get_rate(clk->parent); |
| u32 div; |
| u32 val; |
| |
| if (rate < parent / (armclk_mask + 1)) |
| return -EINVAL; |
| |
| rate = clk_round_rate(clk, rate); |
| div = clk_get_rate(clk->parent) / rate; |
| |
| val = __raw_readl(S3C_CLK_DIV0); |
| val &= ~armclk_mask; |
| val |= (div - 1); |
| __raw_writel(val, S3C_CLK_DIV0); |
| |
| return 0; |
| |
| } |
| |
| static struct clk clk_arm = { |
| .name = "armclk", |
| .parent = &clk_mout_apll.clk, |
| .ops = &(struct clk_ops) { |
| .get_rate = s3c64xx_clk_arm_get_rate, |
| .set_rate = s3c64xx_clk_arm_set_rate, |
| .round_rate = s3c64xx_clk_arm_round_rate, |
| }, |
| }; |
| |
| static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) |
| { |
| unsigned long rate = clk_get_rate(clk->parent); |
| |
| printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); |
| |
| if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) |
| rate /= 2; |
| |
| return rate; |
| } |
| |
| static struct clk_ops clk_dout_ops = { |
| .get_rate = s3c64xx_clk_doutmpll_get_rate, |
| }; |
| |
| static struct clk clk_dout_mpll = { |
| .name = "dout_mpll", |
| .parent = &clk_mout_mpll.clk, |
| .ops = &clk_dout_ops, |
| }; |
| |
| static struct clk *clkset_spi_mmc_list[] = { |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| &clk_fin_epll, |
| &clk_27m, |
| }; |
| |
| static struct clksrc_sources clkset_spi_mmc = { |
| .sources = clkset_spi_mmc_list, |
| .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), |
| }; |
| |
| static struct clk *clkset_irda_list[] = { |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| NULL, |
| &clk_27m, |
| }; |
| |
| static struct clksrc_sources clkset_irda = { |
| .sources = clkset_irda_list, |
| .nr_sources = ARRAY_SIZE(clkset_irda_list), |
| }; |
| |
| static struct clk *clkset_uart_list[] = { |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| NULL, |
| NULL |
| }; |
| |
| static struct clksrc_sources clkset_uart = { |
| .sources = clkset_uart_list, |
| .nr_sources = ARRAY_SIZE(clkset_uart_list), |
| }; |
| |
| static struct clk *clkset_uhost_list[] = { |
| &clk_48m, |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| &clk_fin_epll, |
| }; |
| |
| static struct clksrc_sources clkset_uhost = { |
| .sources = clkset_uhost_list, |
| .nr_sources = ARRAY_SIZE(clkset_uhost_list), |
| }; |
| |
| /* The peripheral clocks are all controlled via clocksource followed |
| * by an optional divider and gate stage. We currently roll this into |
| * one clock which hides the intermediate clock from the mux. |
| * |
| * Note, the JPEG clock can only be an even divider... |
| * |
| * The scaler and LCD clocks depend on the S3C64XX version, and also |
| * have a common parent divisor so are not included here. |
| */ |
| |
| /* clocks that feed other parts of the clock source tree */ |
| |
| static struct clk clk_iis_cd0 = { |
| .name = "iis_cdclk0", |
| }; |
| |
| static struct clk clk_iis_cd1 = { |
| .name = "iis_cdclk1", |
| }; |
| |
| static struct clk clk_iisv4_cd = { |
| .name = "iis_cdclk_v4", |
| }; |
| |
| static struct clk clk_pcm_cd = { |
| .name = "pcm_cdclk", |
| }; |
| |
| static struct clk *clkset_audio0_list[] = { |
| [0] = &clk_mout_epll.clk, |
| [1] = &clk_dout_mpll, |
| [2] = &clk_fin_epll, |
| [3] = &clk_iis_cd0, |
| [4] = &clk_pcm_cd, |
| }; |
| |
| static struct clksrc_sources clkset_audio0 = { |
| .sources = clkset_audio0_list, |
| .nr_sources = ARRAY_SIZE(clkset_audio0_list), |
| }; |
| |
| static struct clk *clkset_audio1_list[] = { |
| [0] = &clk_mout_epll.clk, |
| [1] = &clk_dout_mpll, |
| [2] = &clk_fin_epll, |
| [3] = &clk_iis_cd1, |
| [4] = &clk_pcm_cd, |
| }; |
| |
| static struct clksrc_sources clkset_audio1 = { |
| .sources = clkset_audio1_list, |
| .nr_sources = ARRAY_SIZE(clkset_audio1_list), |
| }; |
| |
| static struct clk *clkset_audio2_list[] = { |
| [0] = &clk_mout_epll.clk, |
| [1] = &clk_dout_mpll, |
| [2] = &clk_fin_epll, |
| [3] = &clk_iisv4_cd, |
| [4] = &clk_pcm_cd, |
| }; |
| |
| static struct clksrc_sources clkset_audio2 = { |
| .sources = clkset_audio2_list, |
| .nr_sources = ARRAY_SIZE(clkset_audio2_list), |
| }; |
| |
| static struct clk *clkset_camif_list[] = { |
| &clk_h2, |
| }; |
| |
| static struct clksrc_sources clkset_camif = { |
| .sources = clkset_camif_list, |
| .nr_sources = ARRAY_SIZE(clkset_camif_list), |
| }; |
| |
| static struct clksrc_clk clksrcs[] = { |
| { |
| .clk = { |
| .name = "usb-bus-host", |
| .ctrlbit = S3C_CLKCON_SCLK_UHOST, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 }, |
| .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 }, |
| .sources = &clkset_uhost, |
| }, { |
| .clk = { |
| .name = "audio-bus", |
| .devname = "samsung-i2s.0", |
| .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, |
| .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, |
| .sources = &clkset_audio0, |
| }, { |
| .clk = { |
| .name = "audio-bus", |
| .devname = "samsung-i2s.1", |
| .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, |
| .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, |
| .sources = &clkset_audio1, |
| }, { |
| .clk = { |
| .name = "audio-bus", |
| .devname = "samsung-i2s.2", |
| .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 }, |
| .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 }, |
| .sources = &clkset_audio2, |
| }, { |
| .clk = { |
| .name = "irda-bus", |
| .ctrlbit = S3C_CLKCON_SCLK_IRDA, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 }, |
| .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 }, |
| .sources = &clkset_irda, |
| }, { |
| .clk = { |
| .name = "camera", |
| .ctrlbit = S3C_CLKCON_SCLK_CAM, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, |
| .reg_src = { .reg = NULL, .shift = 0, .size = 0 }, |
| .sources = &clkset_camif, |
| }, |
| }; |
| |
| /* Where does UCLK0 come from? */ |
| static struct clksrc_clk clk_sclk_uclk = { |
| .clk = { |
| .name = "uclk1", |
| .ctrlbit = S3C_CLKCON_SCLK_UART, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, |
| .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, |
| .sources = &clkset_uart, |
| }; |
| |
| static struct clksrc_clk clk_sclk_mmc0 = { |
| .clk = { |
| .name = "mmc_bus", |
| .devname = "s3c-sdhci.0", |
| .ctrlbit = S3C_CLKCON_SCLK_MMC0, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, |
| .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, |
| .sources = &clkset_spi_mmc, |
| }; |
| |
| static struct clksrc_clk clk_sclk_mmc1 = { |
| .clk = { |
| .name = "mmc_bus", |
| .devname = "s3c-sdhci.1", |
| .ctrlbit = S3C_CLKCON_SCLK_MMC1, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, |
| .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, |
| .sources = &clkset_spi_mmc, |
| }; |
| |
| static struct clksrc_clk clk_sclk_mmc2 = { |
| .clk = { |
| .name = "mmc_bus", |
| .devname = "s3c-sdhci.2", |
| .ctrlbit = S3C_CLKCON_SCLK_MMC2, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, |
| .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, |
| .sources = &clkset_spi_mmc, |
| }; |
| |
| static struct clksrc_clk clk_sclk_spi0 = { |
| .clk = { |
| .name = "spi-bus", |
| .devname = "s3c64xx-spi.0", |
| .ctrlbit = S3C_CLKCON_SCLK_SPI0, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, |
| .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, |
| .sources = &clkset_spi_mmc, |
| }; |
| |
| static struct clksrc_clk clk_sclk_spi1 = { |
| .clk = { |
| .name = "spi-bus", |
| .devname = "s3c64xx-spi.1", |
| .ctrlbit = S3C_CLKCON_SCLK_SPI1, |
| .enable = s3c64xx_sclk_ctrl, |
| }, |
| .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, |
| .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, |
| .sources = &clkset_spi_mmc, |
| }; |
| |
| /* Clock initialisation code */ |
| |
| static struct clksrc_clk *init_parents[] = { |
| &clk_mout_apll, |
| &clk_mout_epll, |
| &clk_mout_mpll, |
| }; |
| |
| static struct clksrc_clk *clksrc_cdev[] = { |
| &clk_sclk_uclk, |
| &clk_sclk_mmc0, |
| &clk_sclk_mmc1, |
| &clk_sclk_mmc2, |
| &clk_sclk_spi0, |
| &clk_sclk_spi1, |
| }; |
| |
| static struct clk *clk_cdev[] = { |
| &clk_hsmmc0, |
| &clk_hsmmc1, |
| &clk_hsmmc2, |
| &clk_48m_spi0, |
| &clk_48m_spi1, |
| }; |
| |
| static struct clk_lookup s3c64xx_clk_lookup[] = { |
| CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), |
| CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), |
| CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), |
| CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), |
| CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), |
| CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), |
| CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), |
| CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), |
| CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), |
| CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), |
| CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0), |
| CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), |
| CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1), |
| }; |
| |
| #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) |
| |
| void __init_or_cpufreq s3c64xx_setup_clocks(void) |
| { |
| struct clk *xtal_clk; |
| unsigned long xtal; |
| unsigned long fclk; |
| unsigned long hclk; |
| unsigned long hclk2; |
| unsigned long pclk; |
| unsigned long epll; |
| unsigned long apll; |
| unsigned long mpll; |
| unsigned int ptr; |
| u32 clkdiv0; |
| |
| printk(KERN_DEBUG "%s: registering clocks\n", __func__); |
| |
| clkdiv0 = __raw_readl(S3C_CLK_DIV0); |
| printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); |
| |
| xtal_clk = clk_get(NULL, "xtal"); |
| BUG_ON(IS_ERR(xtal_clk)); |
| |
| xtal = clk_get_rate(xtal_clk); |
| clk_put(xtal_clk); |
| |
| printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); |
| |
| /* For now assume the mux always selects the crystal */ |
| clk_ext_xtal_mux.parent = xtal_clk; |
| |
| epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), |
| __raw_readl(S3C_EPLL_CON1)); |
| mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); |
| apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); |
| |
| fclk = mpll; |
| |
| printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", |
| apll, mpll, epll); |
| |
| if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) |
| /* Synchronous mode */ |
| hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); |
| else |
| /* Asynchronous mode */ |
| hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); |
| |
| hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); |
| pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); |
| |
| printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", |
| hclk2, hclk, pclk); |
| |
| clk_fout_mpll.rate = mpll; |
| clk_fout_epll.rate = epll; |
| clk_fout_apll.rate = apll; |
| |
| clk_h2.rate = hclk2; |
| clk_h.rate = hclk; |
| clk_p.rate = pclk; |
| clk_f.rate = fclk; |
| |
| for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) |
| s3c_set_clksrc(init_parents[ptr], true); |
| |
| for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) |
| s3c_set_clksrc(&clksrcs[ptr], true); |
| } |
| |
| static struct clk *clks1[] __initdata = { |
| &clk_ext_xtal_mux, |
| &clk_iis_cd0, |
| &clk_iis_cd1, |
| &clk_iisv4_cd, |
| &clk_pcm_cd, |
| &clk_mout_epll.clk, |
| &clk_mout_mpll.clk, |
| &clk_dout_mpll, |
| &clk_arm, |
| }; |
| |
| static struct clk *clks[] __initdata = { |
| &clk_ext, |
| &clk_epll, |
| &clk_27m, |
| &clk_48m, |
| &clk_h2, |
| &clk_xusbxti, |
| }; |
| |
| /** |
| * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410 |
| * @xtal: The rate for the clock crystal feeding the PLLs. |
| * @armclk_divlimit: Divisor mask for ARMCLK. |
| * |
| * Register the clocks for the S3C6400 and S3C6410 SoC range, such |
| * as ARMCLK as well as the necessary parent clocks. |
| * |
| * This call does not setup the clocks, which is left to the |
| * s3c64xx_setup_clocks() call which may be needed by the cpufreq |
| * or resume code to re-set the clocks if the bootloader has changed |
| * them. |
| */ |
| void __init s3c64xx_register_clocks(unsigned long xtal, |
| unsigned armclk_divlimit) |
| { |
| unsigned int cnt; |
| |
| armclk_mask = armclk_divlimit; |
| |
| s3c24xx_register_baseclocks(xtal); |
| s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); |
| |
| s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); |
| |
| s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); |
| s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); |
| |
| s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); |
| for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) |
| s3c_disable_clocks(clk_cdev[cnt], 1); |
| |
| s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); |
| s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); |
| for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) |
| s3c_register_clksrc(clksrc_cdev[cnt], 1); |
| clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); |
| |
| s3c_pwmclk_init(); |
| } |