| /* src/prism2/driver/prism2sta.c |
| * |
| * Implements the station functionality for prism2 |
| * |
| * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. |
| * -------------------------------------------------------------------- |
| * |
| * linux-wlan |
| * |
| * The contents of this file are subject to the Mozilla Public |
| * License Version 1.1 (the "License"); you may not use this file |
| * except in compliance with the License. You may obtain a copy of |
| * the License at http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS |
| * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| * implied. See the License for the specific language governing |
| * rights and limitations under the License. |
| * |
| * Alternatively, the contents of this file may be used under the |
| * terms of the GNU Public License version 2 (the "GPL"), in which |
| * case the provisions of the GPL are applicable instead of the |
| * above. If you wish to allow the use of your version of this file |
| * only under the terms of the GPL and not to allow others to use |
| * your version of this file under the MPL, indicate your decision |
| * by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL. If you do not delete |
| * the provisions above, a recipient may use your version of this |
| * file under either the MPL or the GPL. |
| * |
| * -------------------------------------------------------------------- |
| * |
| * Inquiries regarding the linux-wlan Open Source project can be |
| * made directly to: |
| * |
| * AbsoluteValue Systems Inc. |
| * info@linux-wlan.com |
| * http://www.linux-wlan.com |
| * |
| * -------------------------------------------------------------------- |
| * |
| * Portions of the development of this software were funded by |
| * Intersil Corporation as part of PRISM(R) chipset product development. |
| * |
| * -------------------------------------------------------------------- |
| * |
| * This file implements the module and linux pcmcia routines for the |
| * prism2 driver. |
| * |
| * -------------------------------------------------------------------- |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/wireless.h> |
| #include <linux/netdevice.h> |
| #include <linux/workqueue.h> |
| #include <linux/byteorder/generic.h> |
| #include <linux/ctype.h> |
| |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <asm/byteorder.h> |
| #include <linux/if_arp.h> |
| #include <linux/if_ether.h> |
| #include <linux/bitops.h> |
| |
| #include "p80211types.h" |
| #include "p80211hdr.h" |
| #include "p80211mgmt.h" |
| #include "p80211conv.h" |
| #include "p80211msg.h" |
| #include "p80211netdev.h" |
| #include "p80211req.h" |
| #include "p80211metadef.h" |
| #include "p80211metastruct.h" |
| #include "hfa384x.h" |
| #include "prism2mgmt.h" |
| |
| /* Create a string of printable chars from something that might not be */ |
| /* It's recommended that the str be 4*len + 1 bytes long */ |
| #define wlan_mkprintstr(buf, buflen, str, strlen) \ |
| { \ |
| int i = 0; \ |
| int j = 0; \ |
| memset(str, 0, (strlen)); \ |
| for (i = 0; i < (buflen); i++) { \ |
| if (isprint((buf)[i])) { \ |
| (str)[j] = (buf)[i]; \ |
| j++; \ |
| } else { \ |
| (str)[j] = '\\'; \ |
| (str)[j+1] = 'x'; \ |
| (str)[j+2] = hex_asc_hi((buf)[i]); \ |
| (str)[j+3] = hex_asc_lo((buf)[i]); \ |
| j += 4; \ |
| } \ |
| } \ |
| } |
| |
| static char *dev_info = "prism2_usb"; |
| static wlandevice_t *create_wlan(void); |
| |
| int prism2_reset_holdtime = 30; /* Reset hold time in ms */ |
| int prism2_reset_settletime = 100; /* Reset settle time in ms */ |
| |
| static int prism2_doreset; /* Do a reset at init? */ |
| |
| module_param(prism2_doreset, int, 0644); |
| MODULE_PARM_DESC(prism2_doreset, "Issue a reset on initialization"); |
| |
| module_param(prism2_reset_holdtime, int, 0644); |
| MODULE_PARM_DESC(prism2_reset_holdtime, "reset hold time in ms"); |
| module_param(prism2_reset_settletime, int, 0644); |
| MODULE_PARM_DESC(prism2_reset_settletime, "reset settle time in ms"); |
| |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| void prism2_connect_result(wlandevice_t *wlandev, u8 failed); |
| void prism2_disconnected(wlandevice_t *wlandev); |
| void prism2_roamed(wlandevice_t *wlandev); |
| |
| static int prism2sta_open(wlandevice_t *wlandev); |
| static int prism2sta_close(wlandevice_t *wlandev); |
| static void prism2sta_reset(wlandevice_t *wlandev); |
| static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb, |
| union p80211_hdr *p80211_hdr, |
| struct p80211_metawep *p80211_wep); |
| static int prism2sta_mlmerequest(wlandevice_t *wlandev, struct p80211msg *msg); |
| static int prism2sta_getcardinfo(wlandevice_t *wlandev); |
| static int prism2sta_globalsetup(wlandevice_t *wlandev); |
| static int prism2sta_setmulticast(wlandevice_t *wlandev, netdevice_t *dev); |
| |
| static void prism2sta_inf_handover(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_tallies(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_hostscanresults(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_scanresults(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_chinforesults(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_linkstatus(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_assocstatus(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_authreq(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_authreq_defer(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| static void prism2sta_inf_psusercnt(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf); |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_open |
| * |
| * WLAN device open method. Called from p80211netdev when kernel |
| * device open (start) method is called in response to the |
| * SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP |
| * from clear to set. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process thread |
| ----------------------------------------------------------------*/ |
| static int prism2sta_open(wlandevice_t *wlandev) |
| { |
| /* We don't currently have to do anything else. |
| * The setup of the MAC should be subsequently completed via |
| * the mlme commands. |
| * Higher layers know we're ready from dev->start==1 and |
| * dev->tbusy==0. Our rx path knows to pass up received/ |
| * frames because of dev->flags&IFF_UP is true. |
| */ |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_close |
| * |
| * WLAN device close method. Called from p80211netdev when kernel |
| * device close method is called in response to the |
| * SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP |
| * from set to clear. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process thread |
| ----------------------------------------------------------------*/ |
| static int prism2sta_close(wlandevice_t *wlandev) |
| { |
| /* We don't currently have to do anything else. |
| * Higher layers know we're not ready from dev->start==0 and |
| * dev->tbusy==1. Our rx path knows to not pass up received |
| * frames because of dev->flags&IFF_UP is false. |
| */ |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_reset |
| * |
| * Not currently implented. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * none |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process thread |
| ----------------------------------------------------------------*/ |
| static void prism2sta_reset(wlandevice_t *wlandev) |
| { |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_txframe |
| * |
| * Takes a frame from p80211 and queues it for transmission. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * pb packet buffer struct. Contains an 802.11 |
| * data frame. |
| * p80211_hdr points to the 802.11 header for the packet. |
| * Returns: |
| * 0 Success and more buffs available |
| * 1 Success but no more buffs |
| * 2 Allocation failure |
| * 4 Buffer full or queue busy |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process thread |
| ----------------------------------------------------------------*/ |
| static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb, |
| union p80211_hdr *p80211_hdr, |
| struct p80211_metawep *p80211_wep) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| int result; |
| |
| /* If necessary, set the 802.11 WEP bit */ |
| if ((wlandev->hostwep & (HOSTWEP_PRIVACYINVOKED | HOSTWEP_ENCRYPT)) == |
| HOSTWEP_PRIVACYINVOKED) { |
| p80211_hdr->a3.fc |= cpu_to_le16(WLAN_SET_FC_ISWEP(1)); |
| } |
| |
| result = hfa384x_drvr_txframe(hw, skb, p80211_hdr, p80211_wep); |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_mlmerequest |
| * |
| * wlan command message handler. All we do here is pass the message |
| * over to the prism2sta_mgmt_handler. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * msg wlan command message |
| * Returns: |
| * 0 success |
| * <0 successful acceptance of message, but we're |
| * waiting for an async process to finish before |
| * we're done with the msg. When the asynch |
| * process is done, we'll call the p80211 |
| * function p80211req_confirm() . |
| * >0 An error occurred while we were handling |
| * the message. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process thread |
| ----------------------------------------------------------------*/ |
| static int prism2sta_mlmerequest(wlandevice_t *wlandev, struct p80211msg *msg) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| |
| int result = 0; |
| |
| switch (msg->msgcode) { |
| case DIDmsg_dot11req_mibget: |
| pr_debug("Received mibget request\n"); |
| result = prism2mgmt_mibset_mibget(wlandev, msg); |
| break; |
| case DIDmsg_dot11req_mibset: |
| pr_debug("Received mibset request\n"); |
| result = prism2mgmt_mibset_mibget(wlandev, msg); |
| break; |
| case DIDmsg_dot11req_scan: |
| pr_debug("Received scan request\n"); |
| result = prism2mgmt_scan(wlandev, msg); |
| break; |
| case DIDmsg_dot11req_scan_results: |
| pr_debug("Received scan_results request\n"); |
| result = prism2mgmt_scan_results(wlandev, msg); |
| break; |
| case DIDmsg_dot11req_start: |
| pr_debug("Received mlme start request\n"); |
| result = prism2mgmt_start(wlandev, msg); |
| break; |
| /* |
| * Prism2 specific messages |
| */ |
| case DIDmsg_p2req_readpda: |
| pr_debug("Received mlme readpda request\n"); |
| result = prism2mgmt_readpda(wlandev, msg); |
| break; |
| case DIDmsg_p2req_ramdl_state: |
| pr_debug("Received mlme ramdl_state request\n"); |
| result = prism2mgmt_ramdl_state(wlandev, msg); |
| break; |
| case DIDmsg_p2req_ramdl_write: |
| pr_debug("Received mlme ramdl_write request\n"); |
| result = prism2mgmt_ramdl_write(wlandev, msg); |
| break; |
| case DIDmsg_p2req_flashdl_state: |
| pr_debug("Received mlme flashdl_state request\n"); |
| result = prism2mgmt_flashdl_state(wlandev, msg); |
| break; |
| case DIDmsg_p2req_flashdl_write: |
| pr_debug("Received mlme flashdl_write request\n"); |
| result = prism2mgmt_flashdl_write(wlandev, msg); |
| break; |
| /* |
| * Linux specific messages |
| */ |
| case DIDmsg_lnxreq_hostwep: |
| break; /* ignore me. */ |
| case DIDmsg_lnxreq_ifstate: |
| { |
| struct p80211msg_lnxreq_ifstate *ifstatemsg; |
| pr_debug("Received mlme ifstate request\n"); |
| ifstatemsg = (struct p80211msg_lnxreq_ifstate *) msg; |
| result = |
| prism2sta_ifstate(wlandev, |
| ifstatemsg->ifstate.data); |
| ifstatemsg->resultcode.status = |
| P80211ENUM_msgitem_status_data_ok; |
| ifstatemsg->resultcode.data = result; |
| result = 0; |
| } |
| break; |
| case DIDmsg_lnxreq_wlansniff: |
| pr_debug("Received mlme wlansniff request\n"); |
| result = prism2mgmt_wlansniff(wlandev, msg); |
| break; |
| case DIDmsg_lnxreq_autojoin: |
| pr_debug("Received mlme autojoin request\n"); |
| result = prism2mgmt_autojoin(wlandev, msg); |
| break; |
| case DIDmsg_lnxreq_commsquality:{ |
| struct p80211msg_lnxreq_commsquality *qualmsg; |
| |
| pr_debug("Received commsquality request\n"); |
| |
| qualmsg = (struct p80211msg_lnxreq_commsquality *) msg; |
| |
| qualmsg->link.status = |
| P80211ENUM_msgitem_status_data_ok; |
| qualmsg->level.status = |
| P80211ENUM_msgitem_status_data_ok; |
| qualmsg->noise.status = |
| P80211ENUM_msgitem_status_data_ok; |
| |
| qualmsg->link.data = le16_to_cpu(hw->qual.CQ_currBSS); |
| qualmsg->level.data = le16_to_cpu(hw->qual.ASL_currBSS); |
| qualmsg->noise.data = le16_to_cpu(hw->qual.ANL_currFC); |
| qualmsg->txrate.data = hw->txrate; |
| |
| break; |
| } |
| default: |
| printk(KERN_WARNING "Unknown mgmt request message 0x%08x", |
| msg->msgcode); |
| break; |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_ifstate |
| * |
| * Interface state. This is the primary WLAN interface enable/disable |
| * handler. Following the driver/load/deviceprobe sequence, this |
| * function must be called with a state of "enable" before any other |
| * commands will be accepted. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * msgp ptr to msg buffer |
| * |
| * Returns: |
| * A p80211 message resultcode value. |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process thread (usually) |
| * interrupt |
| ----------------------------------------------------------------*/ |
| u32 prism2sta_ifstate(wlandevice_t *wlandev, u32 ifstate) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| u32 result; |
| |
| result = P80211ENUM_resultcode_implementation_failure; |
| |
| pr_debug("Current MSD state(%d), requesting(%d)\n", |
| wlandev->msdstate, ifstate); |
| switch (ifstate) { |
| case P80211ENUM_ifstate_fwload: |
| switch (wlandev->msdstate) { |
| case WLAN_MSD_HWPRESENT: |
| wlandev->msdstate = WLAN_MSD_FWLOAD_PENDING; |
| /* |
| * Initialize the device+driver sufficiently |
| * for firmware loading. |
| */ |
| result = hfa384x_drvr_start(hw); |
| if (result) { |
| printk(KERN_ERR |
| "hfa384x_drvr_start() failed," |
| "result=%d\n", (int)result); |
| result = |
| P80211ENUM_resultcode_implementation_failure; |
| wlandev->msdstate = WLAN_MSD_HWPRESENT; |
| break; |
| } |
| wlandev->msdstate = WLAN_MSD_FWLOAD; |
| result = P80211ENUM_resultcode_success; |
| break; |
| case WLAN_MSD_FWLOAD: |
| hfa384x_cmd_initialize(hw); |
| result = P80211ENUM_resultcode_success; |
| break; |
| case WLAN_MSD_RUNNING: |
| printk(KERN_WARNING |
| "Cannot enter fwload state from enable state," |
| "you must disable first.\n"); |
| result = P80211ENUM_resultcode_invalid_parameters; |
| break; |
| case WLAN_MSD_HWFAIL: |
| default: |
| /* probe() had a problem or the msdstate contains |
| * an unrecognized value, there's nothing we can do. |
| */ |
| result = P80211ENUM_resultcode_implementation_failure; |
| break; |
| } |
| break; |
| case P80211ENUM_ifstate_enable: |
| switch (wlandev->msdstate) { |
| case WLAN_MSD_HWPRESENT: |
| case WLAN_MSD_FWLOAD: |
| wlandev->msdstate = WLAN_MSD_RUNNING_PENDING; |
| /* Initialize the device+driver for full |
| * operation. Note that this might me an FWLOAD to |
| * to RUNNING transition so we must not do a chip |
| * or board level reset. Note that on failure, |
| * the MSD state is set to HWPRESENT because we |
| * can't make any assumptions about the state |
| * of the hardware or a previous firmware load. |
| */ |
| result = hfa384x_drvr_start(hw); |
| if (result) { |
| printk(KERN_ERR |
| "hfa384x_drvr_start() failed," |
| "result=%d\n", (int)result); |
| result = |
| P80211ENUM_resultcode_implementation_failure; |
| wlandev->msdstate = WLAN_MSD_HWPRESENT; |
| break; |
| } |
| |
| result = prism2sta_getcardinfo(wlandev); |
| if (result) { |
| printk(KERN_ERR |
| "prism2sta_getcardinfo() failed," |
| "result=%d\n", (int)result); |
| result = |
| P80211ENUM_resultcode_implementation_failure; |
| hfa384x_drvr_stop(hw); |
| wlandev->msdstate = WLAN_MSD_HWPRESENT; |
| break; |
| } |
| result = prism2sta_globalsetup(wlandev); |
| if (result) { |
| printk(KERN_ERR |
| "prism2sta_globalsetup() failed," |
| "result=%d\n", (int)result); |
| result = |
| P80211ENUM_resultcode_implementation_failure; |
| hfa384x_drvr_stop(hw); |
| wlandev->msdstate = WLAN_MSD_HWPRESENT; |
| break; |
| } |
| wlandev->msdstate = WLAN_MSD_RUNNING; |
| hw->join_ap = 0; |
| hw->join_retries = 60; |
| result = P80211ENUM_resultcode_success; |
| break; |
| case WLAN_MSD_RUNNING: |
| /* Do nothing, we're already in this state. */ |
| result = P80211ENUM_resultcode_success; |
| break; |
| case WLAN_MSD_HWFAIL: |
| default: |
| /* probe() had a problem or the msdstate contains |
| * an unrecognized value, there's nothing we can do. |
| */ |
| result = P80211ENUM_resultcode_implementation_failure; |
| break; |
| } |
| break; |
| case P80211ENUM_ifstate_disable: |
| switch (wlandev->msdstate) { |
| case WLAN_MSD_HWPRESENT: |
| /* Do nothing, we're already in this state. */ |
| result = P80211ENUM_resultcode_success; |
| break; |
| case WLAN_MSD_FWLOAD: |
| case WLAN_MSD_RUNNING: |
| wlandev->msdstate = WLAN_MSD_HWPRESENT_PENDING; |
| /* |
| * TODO: Shut down the MAC completely. Here a chip |
| * or board level reset is probably called for. |
| * After a "disable" _all_ results are lost, even |
| * those from a fwload. |
| */ |
| if (!wlandev->hwremoved) |
| netif_carrier_off(wlandev->netdev); |
| |
| hfa384x_drvr_stop(hw); |
| |
| wlandev->macmode = WLAN_MACMODE_NONE; |
| wlandev->msdstate = WLAN_MSD_HWPRESENT; |
| result = P80211ENUM_resultcode_success; |
| break; |
| case WLAN_MSD_HWFAIL: |
| default: |
| /* probe() had a problem or the msdstate contains |
| * an unrecognized value, there's nothing we can do. |
| */ |
| result = P80211ENUM_resultcode_implementation_failure; |
| break; |
| } |
| break; |
| default: |
| result = P80211ENUM_resultcode_invalid_parameters; |
| break; |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_getcardinfo |
| * |
| * Collect the NICID, firmware version and any other identifiers |
| * we'd like to have in host-side data structures. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * Either. |
| ----------------------------------------------------------------*/ |
| static int prism2sta_getcardinfo(wlandevice_t *wlandev) |
| { |
| int result = 0; |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| u16 temp; |
| u8 snum[HFA384x_RID_NICSERIALNUMBER_LEN]; |
| char pstr[(HFA384x_RID_NICSERIALNUMBER_LEN * 4) + 1]; |
| |
| /* Collect version and compatibility info */ |
| /* Some are critical, some are not */ |
| /* NIC identity */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_NICIDENTITY, |
| &hw->ident_nic, |
| sizeof(hfa384x_compident_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve NICIDENTITY\n"); |
| goto failed; |
| } |
| |
| /* get all the nic id fields in host byte order */ |
| hw->ident_nic.id = le16_to_cpu(hw->ident_nic.id); |
| hw->ident_nic.variant = le16_to_cpu(hw->ident_nic.variant); |
| hw->ident_nic.major = le16_to_cpu(hw->ident_nic.major); |
| hw->ident_nic.minor = le16_to_cpu(hw->ident_nic.minor); |
| |
| printk(KERN_INFO "ident: nic h/w: id=0x%02x %d.%d.%d\n", |
| hw->ident_nic.id, hw->ident_nic.major, |
| hw->ident_nic.minor, hw->ident_nic.variant); |
| |
| /* Primary f/w identity */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRIIDENTITY, |
| &hw->ident_pri_fw, |
| sizeof(hfa384x_compident_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve PRIIDENTITY\n"); |
| goto failed; |
| } |
| |
| /* get all the private fw id fields in host byte order */ |
| hw->ident_pri_fw.id = le16_to_cpu(hw->ident_pri_fw.id); |
| hw->ident_pri_fw.variant = le16_to_cpu(hw->ident_pri_fw.variant); |
| hw->ident_pri_fw.major = le16_to_cpu(hw->ident_pri_fw.major); |
| hw->ident_pri_fw.minor = le16_to_cpu(hw->ident_pri_fw.minor); |
| |
| printk(KERN_INFO "ident: pri f/w: id=0x%02x %d.%d.%d\n", |
| hw->ident_pri_fw.id, hw->ident_pri_fw.major, |
| hw->ident_pri_fw.minor, hw->ident_pri_fw.variant); |
| |
| /* Station (Secondary?) f/w identity */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STAIDENTITY, |
| &hw->ident_sta_fw, |
| sizeof(hfa384x_compident_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve STAIDENTITY\n"); |
| goto failed; |
| } |
| |
| if (hw->ident_nic.id < 0x8000) { |
| printk(KERN_ERR |
| "FATAL: Card is not an Intersil Prism2/2.5/3\n"); |
| result = -1; |
| goto failed; |
| } |
| |
| /* get all the station fw id fields in host byte order */ |
| hw->ident_sta_fw.id = le16_to_cpu(hw->ident_sta_fw.id); |
| hw->ident_sta_fw.variant = le16_to_cpu(hw->ident_sta_fw.variant); |
| hw->ident_sta_fw.major = le16_to_cpu(hw->ident_sta_fw.major); |
| hw->ident_sta_fw.minor = le16_to_cpu(hw->ident_sta_fw.minor); |
| |
| /* strip out the 'special' variant bits */ |
| hw->mm_mods = hw->ident_sta_fw.variant & (BIT(14) | BIT(15)); |
| hw->ident_sta_fw.variant &= ~((u16) (BIT(14) | BIT(15))); |
| |
| if (hw->ident_sta_fw.id == 0x1f) { |
| printk(KERN_INFO |
| "ident: sta f/w: id=0x%02x %d.%d.%d\n", |
| hw->ident_sta_fw.id, hw->ident_sta_fw.major, |
| hw->ident_sta_fw.minor, hw->ident_sta_fw.variant); |
| } else { |
| printk(KERN_INFO |
| "ident: ap f/w: id=0x%02x %d.%d.%d\n", |
| hw->ident_sta_fw.id, hw->ident_sta_fw.major, |
| hw->ident_sta_fw.minor, hw->ident_sta_fw.variant); |
| printk(KERN_ERR "Unsupported Tertiary AP firmeare loaded!\n"); |
| goto failed; |
| } |
| |
| /* Compatibility range, Modem supplier */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_MFISUPRANGE, |
| &hw->cap_sup_mfi, |
| sizeof(hfa384x_caplevel_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve MFISUPRANGE\n"); |
| goto failed; |
| } |
| |
| /* get all the Compatibility range, modem interface supplier |
| fields in byte order */ |
| hw->cap_sup_mfi.role = le16_to_cpu(hw->cap_sup_mfi.role); |
| hw->cap_sup_mfi.id = le16_to_cpu(hw->cap_sup_mfi.id); |
| hw->cap_sup_mfi.variant = le16_to_cpu(hw->cap_sup_mfi.variant); |
| hw->cap_sup_mfi.bottom = le16_to_cpu(hw->cap_sup_mfi.bottom); |
| hw->cap_sup_mfi.top = le16_to_cpu(hw->cap_sup_mfi.top); |
| |
| printk(KERN_INFO |
| "MFI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_sup_mfi.role, hw->cap_sup_mfi.id, |
| hw->cap_sup_mfi.variant, hw->cap_sup_mfi.bottom, |
| hw->cap_sup_mfi.top); |
| |
| /* Compatibility range, Controller supplier */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CFISUPRANGE, |
| &hw->cap_sup_cfi, |
| sizeof(hfa384x_caplevel_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve CFISUPRANGE\n"); |
| goto failed; |
| } |
| |
| /* get all the Compatibility range, controller interface supplier |
| fields in byte order */ |
| hw->cap_sup_cfi.role = le16_to_cpu(hw->cap_sup_cfi.role); |
| hw->cap_sup_cfi.id = le16_to_cpu(hw->cap_sup_cfi.id); |
| hw->cap_sup_cfi.variant = le16_to_cpu(hw->cap_sup_cfi.variant); |
| hw->cap_sup_cfi.bottom = le16_to_cpu(hw->cap_sup_cfi.bottom); |
| hw->cap_sup_cfi.top = le16_to_cpu(hw->cap_sup_cfi.top); |
| |
| printk(KERN_INFO |
| "CFI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_sup_cfi.role, hw->cap_sup_cfi.id, |
| hw->cap_sup_cfi.variant, hw->cap_sup_cfi.bottom, |
| hw->cap_sup_cfi.top); |
| |
| /* Compatibility range, Primary f/w supplier */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRISUPRANGE, |
| &hw->cap_sup_pri, |
| sizeof(hfa384x_caplevel_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve PRISUPRANGE\n"); |
| goto failed; |
| } |
| |
| /* get all the Compatibility range, primary firmware supplier |
| fields in byte order */ |
| hw->cap_sup_pri.role = le16_to_cpu(hw->cap_sup_pri.role); |
| hw->cap_sup_pri.id = le16_to_cpu(hw->cap_sup_pri.id); |
| hw->cap_sup_pri.variant = le16_to_cpu(hw->cap_sup_pri.variant); |
| hw->cap_sup_pri.bottom = le16_to_cpu(hw->cap_sup_pri.bottom); |
| hw->cap_sup_pri.top = le16_to_cpu(hw->cap_sup_pri.top); |
| |
| printk(KERN_INFO |
| "PRI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_sup_pri.role, hw->cap_sup_pri.id, |
| hw->cap_sup_pri.variant, hw->cap_sup_pri.bottom, |
| hw->cap_sup_pri.top); |
| |
| /* Compatibility range, Station f/w supplier */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STASUPRANGE, |
| &hw->cap_sup_sta, |
| sizeof(hfa384x_caplevel_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve STASUPRANGE\n"); |
| goto failed; |
| } |
| |
| /* get all the Compatibility range, station firmware supplier |
| fields in byte order */ |
| hw->cap_sup_sta.role = le16_to_cpu(hw->cap_sup_sta.role); |
| hw->cap_sup_sta.id = le16_to_cpu(hw->cap_sup_sta.id); |
| hw->cap_sup_sta.variant = le16_to_cpu(hw->cap_sup_sta.variant); |
| hw->cap_sup_sta.bottom = le16_to_cpu(hw->cap_sup_sta.bottom); |
| hw->cap_sup_sta.top = le16_to_cpu(hw->cap_sup_sta.top); |
| |
| if (hw->cap_sup_sta.id == 0x04) { |
| printk(KERN_INFO |
| "STA:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_sup_sta.role, hw->cap_sup_sta.id, |
| hw->cap_sup_sta.variant, hw->cap_sup_sta.bottom, |
| hw->cap_sup_sta.top); |
| } else { |
| printk(KERN_INFO |
| "AP:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_sup_sta.role, hw->cap_sup_sta.id, |
| hw->cap_sup_sta.variant, hw->cap_sup_sta.bottom, |
| hw->cap_sup_sta.top); |
| } |
| |
| /* Compatibility range, primary f/w actor, CFI supplier */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRI_CFIACTRANGES, |
| &hw->cap_act_pri_cfi, |
| sizeof(hfa384x_caplevel_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve PRI_CFIACTRANGES\n"); |
| goto failed; |
| } |
| |
| /* get all the Compatibility range, primary f/w actor, CFI supplier |
| fields in byte order */ |
| hw->cap_act_pri_cfi.role = le16_to_cpu(hw->cap_act_pri_cfi.role); |
| hw->cap_act_pri_cfi.id = le16_to_cpu(hw->cap_act_pri_cfi.id); |
| hw->cap_act_pri_cfi.variant = le16_to_cpu(hw->cap_act_pri_cfi.variant); |
| hw->cap_act_pri_cfi.bottom = le16_to_cpu(hw->cap_act_pri_cfi.bottom); |
| hw->cap_act_pri_cfi.top = le16_to_cpu(hw->cap_act_pri_cfi.top); |
| |
| printk(KERN_INFO |
| "PRI-CFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_act_pri_cfi.role, hw->cap_act_pri_cfi.id, |
| hw->cap_act_pri_cfi.variant, hw->cap_act_pri_cfi.bottom, |
| hw->cap_act_pri_cfi.top); |
| |
| /* Compatibility range, sta f/w actor, CFI supplier */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_CFIACTRANGES, |
| &hw->cap_act_sta_cfi, |
| sizeof(hfa384x_caplevel_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve STA_CFIACTRANGES\n"); |
| goto failed; |
| } |
| |
| /* get all the Compatibility range, station f/w actor, CFI supplier |
| fields in byte order */ |
| hw->cap_act_sta_cfi.role = le16_to_cpu(hw->cap_act_sta_cfi.role); |
| hw->cap_act_sta_cfi.id = le16_to_cpu(hw->cap_act_sta_cfi.id); |
| hw->cap_act_sta_cfi.variant = le16_to_cpu(hw->cap_act_sta_cfi.variant); |
| hw->cap_act_sta_cfi.bottom = le16_to_cpu(hw->cap_act_sta_cfi.bottom); |
| hw->cap_act_sta_cfi.top = le16_to_cpu(hw->cap_act_sta_cfi.top); |
| |
| printk(KERN_INFO |
| "STA-CFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_act_sta_cfi.role, hw->cap_act_sta_cfi.id, |
| hw->cap_act_sta_cfi.variant, hw->cap_act_sta_cfi.bottom, |
| hw->cap_act_sta_cfi.top); |
| |
| /* Compatibility range, sta f/w actor, MFI supplier */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_MFIACTRANGES, |
| &hw->cap_act_sta_mfi, |
| sizeof(hfa384x_caplevel_t)); |
| if (result) { |
| printk(KERN_ERR "Failed to retrieve STA_MFIACTRANGES\n"); |
| goto failed; |
| } |
| |
| /* get all the Compatibility range, station f/w actor, MFI supplier |
| fields in byte order */ |
| hw->cap_act_sta_mfi.role = le16_to_cpu(hw->cap_act_sta_mfi.role); |
| hw->cap_act_sta_mfi.id = le16_to_cpu(hw->cap_act_sta_mfi.id); |
| hw->cap_act_sta_mfi.variant = le16_to_cpu(hw->cap_act_sta_mfi.variant); |
| hw->cap_act_sta_mfi.bottom = le16_to_cpu(hw->cap_act_sta_mfi.bottom); |
| hw->cap_act_sta_mfi.top = le16_to_cpu(hw->cap_act_sta_mfi.top); |
| |
| printk(KERN_INFO |
| "STA-MFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n", |
| hw->cap_act_sta_mfi.role, hw->cap_act_sta_mfi.id, |
| hw->cap_act_sta_mfi.variant, hw->cap_act_sta_mfi.bottom, |
| hw->cap_act_sta_mfi.top); |
| |
| /* Serial Number */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_NICSERIALNUMBER, |
| snum, HFA384x_RID_NICSERIALNUMBER_LEN); |
| if (!result) { |
| wlan_mkprintstr(snum, HFA384x_RID_NICSERIALNUMBER_LEN, |
| pstr, sizeof(pstr)); |
| printk(KERN_INFO "Prism2 card SN: %s\n", pstr); |
| } else { |
| printk(KERN_ERR "Failed to retrieve Prism2 Card SN\n"); |
| goto failed; |
| } |
| |
| /* Collect the MAC address */ |
| result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFOWNMACADDR, |
| wlandev->netdev->dev_addr, ETH_ALEN); |
| if (result != 0) { |
| printk(KERN_ERR "Failed to retrieve mac address\n"); |
| goto failed; |
| } |
| |
| /* short preamble is always implemented */ |
| wlandev->nsdcaps |= P80211_NSDCAP_SHORT_PREAMBLE; |
| |
| /* find out if hardware wep is implemented */ |
| hfa384x_drvr_getconfig16(hw, HFA384x_RID_PRIVACYOPTIMP, &temp); |
| if (temp) |
| wlandev->nsdcaps |= P80211_NSDCAP_HARDWAREWEP; |
| |
| /* get the dBm Scaling constant */ |
| hfa384x_drvr_getconfig16(hw, HFA384x_RID_CNFDBMADJUST, &temp); |
| hw->dbmadjust = temp; |
| |
| /* Only enable scan by default on newer firmware */ |
| if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major, |
| hw->ident_sta_fw.minor, |
| hw->ident_sta_fw.variant) < |
| HFA384x_FIRMWARE_VERSION(1, 5, 5)) { |
| wlandev->nsdcaps |= P80211_NSDCAP_NOSCAN; |
| } |
| |
| /* TODO: Set any internally managed config items */ |
| |
| goto done; |
| failed: |
| printk(KERN_ERR "Failed, result=%d\n", result); |
| done: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_globalsetup |
| * |
| * Set any global RIDs that we want to set at device activation. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * |
| * Returns: |
| * 0 success |
| * >0 f/w reported error |
| * <0 driver reported error |
| * |
| * Side effects: |
| * |
| * Call context: |
| * process thread |
| ----------------------------------------------------------------*/ |
| static int prism2sta_globalsetup(wlandevice_t *wlandev) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| |
| /* Set the maximum frame size */ |
| return hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, |
| WLAN_DATA_MAXLEN); |
| } |
| |
| static int prism2sta_setmulticast(wlandevice_t *wlandev, netdevice_t *dev) |
| { |
| int result = 0; |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| |
| u16 promisc; |
| |
| /* If we're not ready, what's the point? */ |
| if (hw->state != HFA384x_STATE_RUNNING) |
| goto exit; |
| |
| if ((dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0) |
| promisc = P80211ENUM_truth_true; |
| else |
| promisc = P80211ENUM_truth_false; |
| |
| result = |
| hfa384x_drvr_setconfig16_async(hw, HFA384x_RID_PROMISCMODE, |
| promisc); |
| exit: |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_handover |
| * |
| * Handles the receipt of a Handover info frame. Should only be present |
| * in APs only. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_handover(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| pr_debug("received infoframe:HANDOVER (unhandled)\n"); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_tallies |
| * |
| * Handles the receipt of a CommTallies info frame. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_tallies(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| u16 *src16; |
| u32 *dst; |
| u32 *src32; |
| int i; |
| int cnt; |
| |
| /* |
| ** Determine if these are 16-bit or 32-bit tallies, based on the |
| ** record length of the info record. |
| */ |
| |
| cnt = sizeof(hfa384x_CommTallies32_t) / sizeof(u32); |
| if (inf->framelen > 22) { |
| dst = (u32 *) &hw->tallies; |
| src32 = (u32 *) &inf->info.commtallies32; |
| for (i = 0; i < cnt; i++, dst++, src32++) |
| *dst += le32_to_cpu(*src32); |
| } else { |
| dst = (u32 *) &hw->tallies; |
| src16 = (u16 *) &inf->info.commtallies16; |
| for (i = 0; i < cnt; i++, dst++, src16++) |
| *dst += le16_to_cpu(*src16); |
| } |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_scanresults |
| * |
| * Handles the receipt of a Scan Results info frame. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_scanresults(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| int nbss; |
| hfa384x_ScanResult_t *sr = &(inf->info.scanresult); |
| int i; |
| hfa384x_JoinRequest_data_t joinreq; |
| int result; |
| |
| /* Get the number of results, first in bytes, then in results */ |
| nbss = (inf->framelen * sizeof(u16)) - |
| sizeof(inf->infotype) - sizeof(inf->info.scanresult.scanreason); |
| nbss /= sizeof(hfa384x_ScanResultSub_t); |
| |
| /* Print em */ |
| pr_debug("rx scanresults, reason=%d, nbss=%d:\n", |
| inf->info.scanresult.scanreason, nbss); |
| for (i = 0; i < nbss; i++) { |
| pr_debug("chid=%d anl=%d sl=%d bcnint=%d\n", |
| sr->result[i].chid, |
| sr->result[i].anl, |
| sr->result[i].sl, sr->result[i].bcnint); |
| pr_debug(" capinfo=0x%04x proberesp_rate=%d\n", |
| sr->result[i].capinfo, sr->result[i].proberesp_rate); |
| } |
| /* issue a join request */ |
| joinreq.channel = sr->result[0].chid; |
| memcpy(joinreq.bssid, sr->result[0].bssid, WLAN_BSSID_LEN); |
| result = hfa384x_drvr_setconfig(hw, |
| HFA384x_RID_JOINREQUEST, |
| &joinreq, HFA384x_RID_JOINREQUEST_LEN); |
| if (result) { |
| printk(KERN_ERR "setconfig(joinreq) failed, result=%d\n", |
| result); |
| } |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_hostscanresults |
| * |
| * Handles the receipt of a Scan Results info frame. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_hostscanresults(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| int nbss; |
| |
| nbss = (inf->framelen - 3) / 32; |
| pr_debug("Received %d hostscan results\n", nbss); |
| |
| if (nbss > 32) |
| nbss = 32; |
| |
| kfree(hw->scanresults); |
| |
| hw->scanresults = kmemdup(inf, sizeof(hfa384x_InfFrame_t), GFP_ATOMIC); |
| |
| if (nbss == 0) |
| nbss = -1; |
| |
| /* Notify/wake the sleeping caller. */ |
| hw->scanflag = nbss; |
| wake_up_interruptible(&hw->cmdq); |
| }; |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_chinforesults |
| * |
| * Handles the receipt of a Channel Info Results info frame. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_chinforesults(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| unsigned int i, n; |
| |
| hw->channel_info.results.scanchannels = |
| le16_to_cpu(inf->info.chinforesult.scanchannels); |
| |
| for (i = 0, n = 0; i < HFA384x_CHINFORESULT_MAX; i++) { |
| hfa384x_ChInfoResultSub_t *result; |
| hfa384x_ChInfoResultSub_t *chinforesult; |
| int chan; |
| |
| if (!(hw->channel_info.results.scanchannels & (1 << i))) |
| continue; |
| |
| result = &inf->info.chinforesult.result[n]; |
| chan = le16_to_cpu(result->chid) - 1; |
| |
| if (chan < 0 || chan >= HFA384x_CHINFORESULT_MAX) |
| continue; |
| |
| chinforesult = &hw->channel_info.results.result[chan]; |
| chinforesult->chid = chan; |
| chinforesult->anl = le16_to_cpu(result->anl); |
| chinforesult->pnl = le16_to_cpu(result->pnl); |
| chinforesult->active = le16_to_cpu(result->active); |
| |
| pr_debug("chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n", |
| chan + 1, |
| (chinforesult->active & HFA384x_CHINFORESULT_BSSACTIVE) |
| ? "signal" : "noise", |
| chinforesult->anl, chinforesult->pnl, |
| (chinforesult->active & HFA384x_CHINFORESULT_PCFACTIVE) |
| ? 1 : 0); |
| n++; |
| } |
| atomic_set(&hw->channel_info.done, 2); |
| |
| hw->channel_info.count = n; |
| } |
| |
| void prism2sta_processing_defer(struct work_struct *data) |
| { |
| hfa384x_t *hw = container_of(data, struct hfa384x, link_bh); |
| wlandevice_t *wlandev = hw->wlandev; |
| hfa384x_bytestr32_t ssid; |
| int result; |
| |
| /* First let's process the auth frames */ |
| { |
| struct sk_buff *skb; |
| hfa384x_InfFrame_t *inf; |
| |
| while ((skb = skb_dequeue(&hw->authq))) { |
| inf = (hfa384x_InfFrame_t *) skb->data; |
| prism2sta_inf_authreq_defer(wlandev, inf); |
| } |
| |
| } |
| |
| /* Now let's handle the linkstatus stuff */ |
| if (hw->link_status == hw->link_status_new) |
| return; |
| |
| hw->link_status = hw->link_status_new; |
| |
| switch (hw->link_status) { |
| case HFA384x_LINK_NOTCONNECTED: |
| /* I'm currently assuming that this is the initial link |
| * state. It should only be possible immediately |
| * following an Enable command. |
| * Response: |
| * Block Transmits, Ignore receives of data frames |
| */ |
| netif_carrier_off(wlandev->netdev); |
| |
| printk(KERN_INFO "linkstatus=NOTCONNECTED (unhandled)\n"); |
| break; |
| |
| case HFA384x_LINK_CONNECTED: |
| /* This one indicates a successful scan/join/auth/assoc. |
| * When we have the full MLME complement, this event will |
| * signify successful completion of both mlme_authenticate |
| * and mlme_associate. State management will get a little |
| * ugly here. |
| * Response: |
| * Indicate authentication and/or association |
| * Enable Transmits, Receives and pass up data frames |
| */ |
| |
| netif_carrier_on(wlandev->netdev); |
| |
| /* If we are joining a specific AP, set our |
| * state and reset retries |
| */ |
| if (hw->join_ap == 1) |
| hw->join_ap = 2; |
| hw->join_retries = 60; |
| |
| /* Don't call this in monitor mode */ |
| if (wlandev->netdev->type == ARPHRD_ETHER) { |
| u16 portstatus; |
| |
| printk(KERN_INFO "linkstatus=CONNECTED\n"); |
| |
| /* For non-usb devices, we can use the sync versions */ |
| /* Collect the BSSID, and set state to allow tx */ |
| |
| result = hfa384x_drvr_getconfig(hw, |
| HFA384x_RID_CURRENTBSSID, |
| wlandev->bssid, |
| WLAN_BSSID_LEN); |
| if (result) { |
| pr_debug |
| ("getconfig(0x%02x) failed, result = %d\n", |
| HFA384x_RID_CURRENTBSSID, result); |
| return; |
| } |
| |
| result = hfa384x_drvr_getconfig(hw, |
| HFA384x_RID_CURRENTSSID, |
| &ssid, sizeof(ssid)); |
| if (result) { |
| pr_debug |
| ("getconfig(0x%02x) failed, result = %d\n", |
| HFA384x_RID_CURRENTSSID, result); |
| return; |
| } |
| prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *) &ssid, |
| (p80211pstrd_t *) & |
| wlandev->ssid); |
| |
| /* Collect the port status */ |
| result = hfa384x_drvr_getconfig16(hw, |
| HFA384x_RID_PORTSTATUS, |
| &portstatus); |
| if (result) { |
| pr_debug |
| ("getconfig(0x%02x) failed, result = %d\n", |
| HFA384x_RID_PORTSTATUS, result); |
| return; |
| } |
| wlandev->macmode = |
| (portstatus == HFA384x_PSTATUS_CONN_IBSS) ? |
| WLAN_MACMODE_IBSS_STA : WLAN_MACMODE_ESS_STA; |
| |
| /* signal back up to cfg80211 layer */ |
| prism2_connect_result(wlandev, P80211ENUM_truth_false); |
| |
| /* Get the ball rolling on the comms quality stuff */ |
| prism2sta_commsqual_defer(&hw->commsqual_bh); |
| } |
| break; |
| |
| case HFA384x_LINK_DISCONNECTED: |
| /* This one indicates that our association is gone. We've |
| * lost connection with the AP and/or been disassociated. |
| * This indicates that the MAC has completely cleared it's |
| * associated state. We * should send a deauth indication |
| * (implying disassoc) up * to the MLME. |
| * Response: |
| * Indicate Deauthentication |
| * Block Transmits, Ignore receives of data frames |
| */ |
| if (wlandev->netdev->type == ARPHRD_ETHER) |
| printk(KERN_INFO |
| "linkstatus=DISCONNECTED (unhandled)\n"); |
| wlandev->macmode = WLAN_MACMODE_NONE; |
| |
| netif_carrier_off(wlandev->netdev); |
| |
| /* signal back up to cfg80211 layer */ |
| prism2_disconnected(wlandev); |
| |
| break; |
| |
| case HFA384x_LINK_AP_CHANGE: |
| /* This one indicates that the MAC has decided to and |
| * successfully completed a change to another AP. We |
| * should probably implement a reassociation indication |
| * in response to this one. I'm thinking that the the |
| * p80211 layer needs to be notified in case of |
| * buffering/queueing issues. User mode also needs to be |
| * notified so that any BSS dependent elements can be |
| * updated. |
| * associated state. We * should send a deauth indication |
| * (implying disassoc) up * to the MLME. |
| * Response: |
| * Indicate Reassociation |
| * Enable Transmits, Receives and pass up data frames |
| */ |
| printk(KERN_INFO "linkstatus=AP_CHANGE\n"); |
| |
| result = hfa384x_drvr_getconfig(hw, |
| HFA384x_RID_CURRENTBSSID, |
| wlandev->bssid, WLAN_BSSID_LEN); |
| if (result) { |
| pr_debug("getconfig(0x%02x) failed, result = %d\n", |
| HFA384x_RID_CURRENTBSSID, result); |
| return; |
| } |
| |
| result = hfa384x_drvr_getconfig(hw, |
| HFA384x_RID_CURRENTSSID, |
| &ssid, sizeof(ssid)); |
| if (result) { |
| pr_debug("getconfig(0x%02x) failed, result = %d\n", |
| HFA384x_RID_CURRENTSSID, result); |
| return; |
| } |
| prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *) &ssid, |
| (p80211pstrd_t *) &wlandev->ssid); |
| |
| hw->link_status = HFA384x_LINK_CONNECTED; |
| netif_carrier_on(wlandev->netdev); |
| |
| /* signal back up to cfg80211 layer */ |
| prism2_roamed(wlandev); |
| |
| break; |
| |
| case HFA384x_LINK_AP_OUTOFRANGE: |
| /* This one indicates that the MAC has decided that the |
| * AP is out of range, but hasn't found a better candidate |
| * so the MAC maintains its "associated" state in case |
| * we get back in range. We should block transmits and |
| * receives in this state. Do we need an indication here? |
| * Probably not since a polling user-mode element would |
| * get this status from from p2PortStatus(FD40). What about |
| * p80211? |
| * Response: |
| * Block Transmits, Ignore receives of data frames |
| */ |
| printk(KERN_INFO "linkstatus=AP_OUTOFRANGE (unhandled)\n"); |
| |
| netif_carrier_off(wlandev->netdev); |
| |
| break; |
| |
| case HFA384x_LINK_AP_INRANGE: |
| /* This one indicates that the MAC has decided that the |
| * AP is back in range. We continue working with our |
| * existing association. |
| * Response: |
| * Enable Transmits, Receives and pass up data frames |
| */ |
| printk(KERN_INFO "linkstatus=AP_INRANGE\n"); |
| |
| hw->link_status = HFA384x_LINK_CONNECTED; |
| netif_carrier_on(wlandev->netdev); |
| |
| break; |
| |
| case HFA384x_LINK_ASSOCFAIL: |
| /* This one is actually a peer to CONNECTED. We've |
| * requested a join for a given SSID and optionally BSSID. |
| * We can use this one to indicate authentication and |
| * association failures. The trick is going to be |
| * 1) identifying the failure, and 2) state management. |
| * Response: |
| * Disable Transmits, Ignore receives of data frames |
| */ |
| if (hw->join_ap && --hw->join_retries > 0) { |
| hfa384x_JoinRequest_data_t joinreq; |
| joinreq = hw->joinreq; |
| /* Send the join request */ |
| hfa384x_drvr_setconfig(hw, |
| HFA384x_RID_JOINREQUEST, |
| &joinreq, |
| HFA384x_RID_JOINREQUEST_LEN); |
| printk(KERN_INFO |
| "linkstatus=ASSOCFAIL (re-submitting join)\n"); |
| } else { |
| printk(KERN_INFO "linkstatus=ASSOCFAIL (unhandled)\n"); |
| } |
| |
| netif_carrier_off(wlandev->netdev); |
| |
| /* signal back up to cfg80211 layer */ |
| prism2_connect_result(wlandev, P80211ENUM_truth_true); |
| |
| break; |
| |
| default: |
| /* This is bad, IO port problems? */ |
| printk(KERN_WARNING |
| "unknown linkstatus=0x%02x\n", hw->link_status); |
| return; |
| } |
| |
| wlandev->linkstatus = (hw->link_status == HFA384x_LINK_CONNECTED); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_linkstatus |
| * |
| * Handles the receipt of a Link Status info frame. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_linkstatus(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| |
| hw->link_status_new = le16_to_cpu(inf->info.linkstatus.linkstatus); |
| |
| schedule_work(&hw->link_bh); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_assocstatus |
| * |
| * Handles the receipt of an Association Status info frame. Should |
| * be present in APs only. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_assocstatus(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| hfa384x_AssocStatus_t rec; |
| int i; |
| |
| memcpy(&rec, &inf->info.assocstatus, sizeof(rec)); |
| rec.assocstatus = le16_to_cpu(rec.assocstatus); |
| rec.reason = le16_to_cpu(rec.reason); |
| |
| /* |
| ** Find the address in the list of authenticated stations. |
| ** If it wasn't found, then this address has not been previously |
| ** authenticated and something weird has happened if this is |
| ** anything other than an "authentication failed" message. |
| ** If the address was found, then set the "associated" flag for |
| ** that station, based on whether the station is associating or |
| ** losing its association. Something weird has also happened |
| ** if we find the address in the list of authenticated stations |
| ** but we are getting an "authentication failed" message. |
| */ |
| |
| for (i = 0; i < hw->authlist.cnt; i++) |
| if (memcmp(rec.sta_addr, hw->authlist.addr[i], ETH_ALEN) == 0) |
| break; |
| |
| if (i >= hw->authlist.cnt) { |
| if (rec.assocstatus != HFA384x_ASSOCSTATUS_AUTHFAIL) |
| printk(KERN_WARNING |
| "assocstatus info frame received for non-authenticated station.\n"); |
| } else { |
| hw->authlist.assoc[i] = |
| (rec.assocstatus == HFA384x_ASSOCSTATUS_STAASSOC || |
| rec.assocstatus == HFA384x_ASSOCSTATUS_REASSOC); |
| |
| if (rec.assocstatus == HFA384x_ASSOCSTATUS_AUTHFAIL) |
| printk(KERN_WARNING |
| "authfail assocstatus info frame received for authenticated station.\n"); |
| } |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_authreq |
| * |
| * Handles the receipt of an Authentication Request info frame. Should |
| * be present in APs only. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| * |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_authreq(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| struct sk_buff *skb; |
| |
| skb = dev_alloc_skb(sizeof(*inf)); |
| if (skb) { |
| skb_put(skb, sizeof(*inf)); |
| memcpy(skb->data, inf, sizeof(*inf)); |
| skb_queue_tail(&hw->authq, skb); |
| schedule_work(&hw->link_bh); |
| } |
| } |
| |
| static void prism2sta_inf_authreq_defer(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| hfa384x_authenticateStation_data_t rec; |
| |
| int i, added, result, cnt; |
| u8 *addr; |
| |
| /* |
| ** Build the AuthenticateStation record. Initialize it for denying |
| ** authentication. |
| */ |
| |
| memcpy(rec.address, inf->info.authreq.sta_addr, ETH_ALEN); |
| rec.status = P80211ENUM_status_unspec_failure; |
| |
| /* |
| ** Authenticate based on the access mode. |
| */ |
| |
| switch (hw->accessmode) { |
| case WLAN_ACCESS_NONE: |
| |
| /* |
| ** Deny all new authentications. However, if a station |
| ** is ALREADY authenticated, then accept it. |
| */ |
| |
| for (i = 0; i < hw->authlist.cnt; i++) |
| if (memcmp(rec.address, hw->authlist.addr[i], |
| ETH_ALEN) == 0) { |
| rec.status = P80211ENUM_status_successful; |
| break; |
| } |
| |
| break; |
| |
| case WLAN_ACCESS_ALL: |
| |
| /* |
| ** Allow all authentications. |
| */ |
| |
| rec.status = P80211ENUM_status_successful; |
| break; |
| |
| case WLAN_ACCESS_ALLOW: |
| |
| /* |
| ** Only allow the authentication if the MAC address |
| ** is in the list of allowed addresses. |
| ** |
| ** Since this is the interrupt handler, we may be here |
| ** while the access list is in the middle of being |
| ** updated. Choose the list which is currently okay. |
| ** See "prism2mib_priv_accessallow()" for details. |
| */ |
| |
| if (hw->allow.modify == 0) { |
| cnt = hw->allow.cnt; |
| addr = hw->allow.addr[0]; |
| } else { |
| cnt = hw->allow.cnt1; |
| addr = hw->allow.addr1[0]; |
| } |
| |
| for (i = 0; i < cnt; i++, addr += ETH_ALEN) |
| if (memcmp(rec.address, addr, ETH_ALEN) == 0) { |
| rec.status = P80211ENUM_status_successful; |
| break; |
| } |
| |
| break; |
| |
| case WLAN_ACCESS_DENY: |
| |
| /* |
| ** Allow the authentication UNLESS the MAC address is |
| ** in the list of denied addresses. |
| ** |
| ** Since this is the interrupt handler, we may be here |
| ** while the access list is in the middle of being |
| ** updated. Choose the list which is currently okay. |
| ** See "prism2mib_priv_accessdeny()" for details. |
| */ |
| |
| if (hw->deny.modify == 0) { |
| cnt = hw->deny.cnt; |
| addr = hw->deny.addr[0]; |
| } else { |
| cnt = hw->deny.cnt1; |
| addr = hw->deny.addr1[0]; |
| } |
| |
| rec.status = P80211ENUM_status_successful; |
| |
| for (i = 0; i < cnt; i++, addr += ETH_ALEN) |
| if (memcmp(rec.address, addr, ETH_ALEN) == 0) { |
| rec.status = P80211ENUM_status_unspec_failure; |
| break; |
| } |
| |
| break; |
| } |
| |
| /* |
| ** If the authentication is okay, then add the MAC address to the |
| ** list of authenticated stations. Don't add the address if it |
| ** is already in the list. (802.11b does not seem to disallow |
| ** a station from issuing an authentication request when the |
| ** station is already authenticated. Does this sort of thing |
| ** ever happen? We might as well do the check just in case.) |
| */ |
| |
| added = 0; |
| |
| if (rec.status == P80211ENUM_status_successful) { |
| for (i = 0; i < hw->authlist.cnt; i++) |
| if (memcmp(rec.address, hw->authlist.addr[i], ETH_ALEN) |
| == 0) |
| break; |
| |
| if (i >= hw->authlist.cnt) { |
| if (hw->authlist.cnt >= WLAN_AUTH_MAX) { |
| rec.status = P80211ENUM_status_ap_full; |
| } else { |
| memcpy(hw->authlist.addr[hw->authlist.cnt], |
| rec.address, ETH_ALEN); |
| hw->authlist.cnt++; |
| added = 1; |
| } |
| } |
| } |
| |
| /* |
| ** Send back the results of the authentication. If this doesn't work, |
| ** then make sure to remove the address from the authenticated list if |
| ** it was added. |
| */ |
| |
| rec.status = cpu_to_le16(rec.status); |
| rec.algorithm = inf->info.authreq.algorithm; |
| |
| result = hfa384x_drvr_setconfig(hw, HFA384x_RID_AUTHENTICATESTA, |
| &rec, sizeof(rec)); |
| if (result) { |
| if (added) |
| hw->authlist.cnt--; |
| printk(KERN_ERR |
| "setconfig(authenticatestation) failed, result=%d\n", |
| result); |
| } |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_inf_psusercnt |
| * |
| * Handles the receipt of a PowerSaveUserCount info frame. Should |
| * be present in APs only. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to info frame (contents in hfa384x order) |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| static void prism2sta_inf_psusercnt(wlandevice_t *wlandev, |
| hfa384x_InfFrame_t *inf) |
| { |
| hfa384x_t *hw = (hfa384x_t *) wlandev->priv; |
| |
| hw->psusercount = le16_to_cpu(inf->info.psusercnt.usercnt); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_ev_info |
| * |
| * Handles the Info event. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * inf ptr to a generic info frame |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| void prism2sta_ev_info(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf) |
| { |
| inf->infotype = le16_to_cpu(inf->infotype); |
| /* Dispatch */ |
| switch (inf->infotype) { |
| case HFA384x_IT_HANDOVERADDR: |
| prism2sta_inf_handover(wlandev, inf); |
| break; |
| case HFA384x_IT_COMMTALLIES: |
| prism2sta_inf_tallies(wlandev, inf); |
| break; |
| case HFA384x_IT_HOSTSCANRESULTS: |
| prism2sta_inf_hostscanresults(wlandev, inf); |
| break; |
| case HFA384x_IT_SCANRESULTS: |
| prism2sta_inf_scanresults(wlandev, inf); |
| break; |
| case HFA384x_IT_CHINFORESULTS: |
| prism2sta_inf_chinforesults(wlandev, inf); |
| break; |
| case HFA384x_IT_LINKSTATUS: |
| prism2sta_inf_linkstatus(wlandev, inf); |
| break; |
| case HFA384x_IT_ASSOCSTATUS: |
| prism2sta_inf_assocstatus(wlandev, inf); |
| break; |
| case HFA384x_IT_AUTHREQ: |
| prism2sta_inf_authreq(wlandev, inf); |
| break; |
| case HFA384x_IT_PSUSERCNT: |
| prism2sta_inf_psusercnt(wlandev, inf); |
| break; |
| case HFA384x_IT_KEYIDCHANGED: |
| printk(KERN_WARNING "Unhandled IT_KEYIDCHANGED\n"); |
| break; |
| case HFA384x_IT_ASSOCREQ: |
| printk(KERN_WARNING "Unhandled IT_ASSOCREQ\n"); |
| break; |
| case HFA384x_IT_MICFAILURE: |
| printk(KERN_WARNING "Unhandled IT_MICFAILURE\n"); |
| break; |
| default: |
| printk(KERN_WARNING |
| "Unknown info type=0x%02x\n", inf->infotype); |
| break; |
| } |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_ev_txexc |
| * |
| * Handles the TxExc event. A Transmit Exception event indicates |
| * that the MAC's TX process was unsuccessful - so the packet did |
| * not get transmitted. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * status tx frame status word |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| void prism2sta_ev_txexc(wlandevice_t *wlandev, u16 status) |
| { |
| pr_debug("TxExc status=0x%x.\n", status); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_ev_tx |
| * |
| * Handles the Tx event. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * status tx frame status word |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| void prism2sta_ev_tx(wlandevice_t *wlandev, u16 status) |
| { |
| pr_debug("Tx Complete, status=0x%04x\n", status); |
| /* update linux network stats */ |
| wlandev->linux_stats.tx_packets++; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_ev_rx |
| * |
| * Handles the Rx event. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| void prism2sta_ev_rx(wlandevice_t *wlandev, struct sk_buff *skb) |
| { |
| p80211netdev_rx(wlandev, skb); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2sta_ev_alloc |
| * |
| * Handles the Alloc event. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * |
| * Returns: |
| * nothing |
| * |
| * Side effects: |
| * |
| * Call context: |
| * interrupt |
| ----------------------------------------------------------------*/ |
| void prism2sta_ev_alloc(wlandevice_t *wlandev) |
| { |
| netif_wake_queue(wlandev->netdev); |
| } |
| |
| /*---------------------------------------------------------------- |
| * create_wlan |
| * |
| * Called at module init time. This creates the wlandevice_t structure |
| * and initializes it with relevant bits. |
| * |
| * Arguments: |
| * none |
| * |
| * Returns: |
| * the created wlandevice_t structure. |
| * |
| * Side effects: |
| * also allocates the priv/hw structures. |
| * |
| * Call context: |
| * process thread |
| * |
| ----------------------------------------------------------------*/ |
| static wlandevice_t *create_wlan(void) |
| { |
| wlandevice_t *wlandev = NULL; |
| hfa384x_t *hw = NULL; |
| |
| /* Alloc our structures */ |
| wlandev = kzalloc(sizeof(wlandevice_t), GFP_KERNEL); |
| hw = kzalloc(sizeof(hfa384x_t), GFP_KERNEL); |
| |
| if (!wlandev || !hw) { |
| printk(KERN_ERR "%s: Memory allocation failure.\n", dev_info); |
| kfree(wlandev); |
| kfree(hw); |
| return NULL; |
| } |
| |
| /* Initialize the network device object. */ |
| wlandev->nsdname = dev_info; |
| wlandev->msdstate = WLAN_MSD_HWPRESENT_PENDING; |
| wlandev->priv = hw; |
| wlandev->open = prism2sta_open; |
| wlandev->close = prism2sta_close; |
| wlandev->reset = prism2sta_reset; |
| wlandev->txframe = prism2sta_txframe; |
| wlandev->mlmerequest = prism2sta_mlmerequest; |
| wlandev->set_multicast_list = prism2sta_setmulticast; |
| wlandev->tx_timeout = hfa384x_tx_timeout; |
| |
| wlandev->nsdcaps = P80211_NSDCAP_HWFRAGMENT | P80211_NSDCAP_AUTOJOIN; |
| |
| /* Initialize the device private data structure. */ |
| hw->dot11_desired_bss_type = 1; |
| |
| return wlandev; |
| } |
| |
| void prism2sta_commsqual_defer(struct work_struct *data) |
| { |
| hfa384x_t *hw = container_of(data, struct hfa384x, commsqual_bh); |
| wlandevice_t *wlandev = hw->wlandev; |
| hfa384x_bytestr32_t ssid; |
| struct p80211msg_dot11req_mibget msg; |
| p80211item_uint32_t *mibitem = (p80211item_uint32_t *) |
| &msg.mibattribute.data; |
| int result = 0; |
| |
| if (hw->wlandev->hwremoved) |
| return; |
| |
| /* we don't care if we're in AP mode */ |
| if ((wlandev->macmode == WLAN_MACMODE_NONE) || |
| (wlandev->macmode == WLAN_MACMODE_ESS_AP)) { |
| return; |
| } |
| |
| /* It only makes sense to poll these in non-IBSS */ |
| if (wlandev->macmode != WLAN_MACMODE_IBSS_STA) { |
| result = hfa384x_drvr_getconfig( |
| hw, HFA384x_RID_DBMCOMMSQUALITY, |
| &hw->qual, HFA384x_RID_DBMCOMMSQUALITY_LEN); |
| |
| if (result) { |
| printk(KERN_ERR "error fetching commsqual\n"); |
| return; |
| } |
| |
| pr_debug("commsqual %d %d %d\n", |
| le16_to_cpu(hw->qual.CQ_currBSS), |
| le16_to_cpu(hw->qual.ASL_currBSS), |
| le16_to_cpu(hw->qual.ANL_currFC)); |
| } |
| |
| /* Get the signal rate */ |
| msg.msgcode = DIDmsg_dot11req_mibget; |
| mibitem->did = DIDmib_p2_p2MAC_p2CurrentTxRate; |
| result = p80211req_dorequest(wlandev, (u8 *) &msg); |
| |
| if (result) { |
| pr_debug("get signal rate failed, result = %d\n", |
| result); |
| return; |
| } |
| |
| switch (mibitem->data) { |
| case HFA384x_RATEBIT_1: |
| hw->txrate = 10; |
| break; |
| case HFA384x_RATEBIT_2: |
| hw->txrate = 20; |
| break; |
| case HFA384x_RATEBIT_5dot5: |
| hw->txrate = 55; |
| break; |
| case HFA384x_RATEBIT_11: |
| hw->txrate = 110; |
| break; |
| default: |
| pr_debug("Bad ratebit (%d)\n", mibitem->data); |
| } |
| |
| /* Lastly, we need to make sure the BSSID didn't change on us */ |
| result = hfa384x_drvr_getconfig(hw, |
| HFA384x_RID_CURRENTBSSID, |
| wlandev->bssid, WLAN_BSSID_LEN); |
| if (result) { |
| pr_debug("getconfig(0x%02x) failed, result = %d\n", |
| HFA384x_RID_CURRENTBSSID, result); |
| return; |
| } |
| |
| result = hfa384x_drvr_getconfig(hw, |
| HFA384x_RID_CURRENTSSID, |
| &ssid, sizeof(ssid)); |
| if (result) { |
| pr_debug("getconfig(0x%02x) failed, result = %d\n", |
| HFA384x_RID_CURRENTSSID, result); |
| return; |
| } |
| prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *) &ssid, |
| (p80211pstrd_t *) &wlandev->ssid); |
| |
| /* Reschedule timer */ |
| mod_timer(&hw->commsqual_timer, jiffies + HZ); |
| } |
| |
| void prism2sta_commsqual_timer(unsigned long data) |
| { |
| hfa384x_t *hw = (hfa384x_t *) data; |
| |
| schedule_work(&hw->commsqual_bh); |
| } |