EDAC, layerscape: Add Layerscape EDAC support
Add DDR EDAC driver for ARM-based compatible controllers. Both
big-endian and little-endian are supported, as specified in device tree.
Signed-off-by: York Sun <york.sun@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1471990465-27443-1-git-send-email-york.sun@nxp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index bb2616b..52f30a6 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -55,6 +55,7 @@
config ARCH_LAYERSCAPE
bool "ARMv8 based Freescale Layerscape SoC family"
+ select EDAC_SUPPORT
help
This enables support for the Freescale Layerscape SoC family.
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 394cd16..49d7900 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -258,6 +258,13 @@
Support for error detection and correction on the Freescale
MPC8349, MPC8560, MPC8540, MPC8548, T4240
+config EDAC_LAYERSCAPE
+ tristate "Freescale Layerscape DDR"
+ depends on EDAC_MM_EDAC && ARCH_LAYERSCAPE
+ help
+ Support for error detection and correction on Freescale memory
+ controllers on Layerscape SoCs.
+
config EDAC_MV64X60
tristate "Marvell MV64x60"
depends on EDAC_MM_EDAC && MV64X60
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index ee047a4..910dc83 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -54,6 +54,9 @@
mpc85xx_edac_mod-y := fsl_ddr_edac.o mpc85xx_edac.o
obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac_mod.o
+layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o
+obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o
+
obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
index d8ce1f6..afade14 100644
--- a/drivers/edac/fsl_ddr_edac.c
+++ b/drivers/edac/fsl_ddr_edac.c
@@ -26,6 +26,7 @@
#include <linux/of_platform.h>
#include <linux/of_device.h>
+#include <linux/of_address.h>
#include "edac_module.h"
#include "edac_core.h"
#include "fsl_ddr_edac.h"
@@ -478,7 +479,6 @@
pdata = mci->pvt_info;
pdata->name = "fsl_mc_err";
- pdata->irq = NO_IRQ;
mci->pdev = &op->dev;
pdata->edac_idx = edac_mc_idx++;
dev_set_drvdata(mci->pdev, mci);
diff --git a/drivers/edac/layerscape_edac.c b/drivers/edac/layerscape_edac.c
new file mode 100644
index 0000000..6c59d89
--- /dev/null
+++ b/drivers/edac/layerscape_edac.c
@@ -0,0 +1,73 @@
+/*
+ * Freescale Memory Controller kernel module
+ *
+ * Author: York Sun <york.sun@nxp.com>
+ *
+ * Copyright 2016 NXP Semiconductor
+ *
+ * Derived from mpc85xx_edac.c
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "edac_core.h"
+#include "fsl_ddr_edac.h"
+
+static const struct of_device_id fsl_ddr_mc_err_of_match[] = {
+ { .compatible = "fsl,qoriq-memory-controller", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, fsl_ddr_mc_err_of_match);
+
+static struct platform_driver fsl_ddr_mc_err_driver = {
+ .probe = fsl_mc_err_probe,
+ .remove = fsl_mc_err_remove,
+ .driver = {
+ .name = "fsl_ddr_mc_err",
+ .of_match_table = fsl_ddr_mc_err_of_match,
+ },
+};
+
+static int __init fsl_ddr_mc_init(void)
+{
+ int res;
+
+ /* make sure error reporting method is sane */
+ switch (edac_op_state) {
+ case EDAC_OPSTATE_POLL:
+ case EDAC_OPSTATE_INT:
+ break;
+ default:
+ edac_op_state = EDAC_OPSTATE_INT;
+ break;
+ }
+
+ res = platform_driver_register(&fsl_ddr_mc_err_driver);
+ if (res) {
+ pr_err("MC fails to register\n");
+ return res;
+ }
+
+ return 0;
+}
+
+module_init(fsl_ddr_mc_init);
+
+static void __exit fsl_ddr_mc_exit(void)
+{
+ platform_driver_unregister(&fsl_ddr_mc_err_driver);
+}
+
+module_exit(fsl_ddr_mc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NXP Semiconductor");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state,
+ "EDAC Error Reporting state: 0=Poll, 2=Interrupt");