| /* |
| * cfg80211 scan result handling |
| * |
| * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright 2016 Intel Deutschland GmbH |
| */ |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/wireless.h> |
| #include <linux/nl80211.h> |
| #include <linux/etherdevice.h> |
| #include <net/arp.h> |
| #include <net/cfg80211.h> |
| #include <net/cfg80211-wext.h> |
| #include <net/iw_handler.h> |
| #include "core.h" |
| #include "nl80211.h" |
| #include "wext-compat.h" |
| #include "rdev-ops.h" |
| |
| /** |
| * DOC: BSS tree/list structure |
| * |
| * At the top level, the BSS list is kept in both a list in each |
| * registered device (@bss_list) as well as an RB-tree for faster |
| * lookup. In the RB-tree, entries can be looked up using their |
| * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID |
| * for other BSSes. |
| * |
| * Due to the possibility of hidden SSIDs, there's a second level |
| * structure, the "hidden_list" and "hidden_beacon_bss" pointer. |
| * The hidden_list connects all BSSes belonging to a single AP |
| * that has a hidden SSID, and connects beacon and probe response |
| * entries. For a probe response entry for a hidden SSID, the |
| * hidden_beacon_bss pointer points to the BSS struct holding the |
| * beacon's information. |
| * |
| * Reference counting is done for all these references except for |
| * the hidden_list, so that a beacon BSS struct that is otherwise |
| * not referenced has one reference for being on the bss_list and |
| * one for each probe response entry that points to it using the |
| * hidden_beacon_bss pointer. When a BSS struct that has such a |
| * pointer is get/put, the refcount update is also propagated to |
| * the referenced struct, this ensure that it cannot get removed |
| * while somebody is using the probe response version. |
| * |
| * Note that the hidden_beacon_bss pointer never changes, due to |
| * the reference counting. Therefore, no locking is needed for |
| * it. |
| * |
| * Also note that the hidden_beacon_bss pointer is only relevant |
| * if the driver uses something other than the IEs, e.g. private |
| * data stored stored in the BSS struct, since the beacon IEs are |
| * also linked into the probe response struct. |
| */ |
| |
| /* |
| * Limit the number of BSS entries stored in mac80211. Each one is |
| * a bit over 4k at most, so this limits to roughly 4-5M of memory. |
| * If somebody wants to really attack this though, they'd likely |
| * use small beacons, and only one type of frame, limiting each of |
| * the entries to a much smaller size (in order to generate more |
| * entries in total, so overhead is bigger.) |
| */ |
| static int bss_entries_limit = 1000; |
| module_param(bss_entries_limit, int, 0644); |
| MODULE_PARM_DESC(bss_entries_limit, |
| "limit to number of scan BSS entries (per wiphy, default 1000)"); |
| |
| #define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ) |
| |
| static void bss_free(struct cfg80211_internal_bss *bss) |
| { |
| struct cfg80211_bss_ies *ies; |
| |
| if (WARN_ON(atomic_read(&bss->hold))) |
| return; |
| |
| ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); |
| if (ies && !bss->pub.hidden_beacon_bss) |
| kfree_rcu(ies, rcu_head); |
| ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); |
| if (ies) |
| kfree_rcu(ies, rcu_head); |
| |
| /* |
| * This happens when the module is removed, it doesn't |
| * really matter any more save for completeness |
| */ |
| if (!list_empty(&bss->hidden_list)) |
| list_del(&bss->hidden_list); |
| |
| kfree(bss); |
| } |
| |
| static inline void bss_ref_get(struct cfg80211_registered_device *rdev, |
| struct cfg80211_internal_bss *bss) |
| { |
| lockdep_assert_held(&rdev->bss_lock); |
| |
| bss->refcount++; |
| if (bss->pub.hidden_beacon_bss) { |
| bss = container_of(bss->pub.hidden_beacon_bss, |
| struct cfg80211_internal_bss, |
| pub); |
| bss->refcount++; |
| } |
| } |
| |
| static inline void bss_ref_put(struct cfg80211_registered_device *rdev, |
| struct cfg80211_internal_bss *bss) |
| { |
| lockdep_assert_held(&rdev->bss_lock); |
| |
| if (bss->pub.hidden_beacon_bss) { |
| struct cfg80211_internal_bss *hbss; |
| hbss = container_of(bss->pub.hidden_beacon_bss, |
| struct cfg80211_internal_bss, |
| pub); |
| hbss->refcount--; |
| if (hbss->refcount == 0) |
| bss_free(hbss); |
| } |
| bss->refcount--; |
| if (bss->refcount == 0) |
| bss_free(bss); |
| } |
| |
| static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *rdev, |
| struct cfg80211_internal_bss *bss) |
| { |
| lockdep_assert_held(&rdev->bss_lock); |
| |
| if (!list_empty(&bss->hidden_list)) { |
| /* |
| * don't remove the beacon entry if it has |
| * probe responses associated with it |
| */ |
| if (!bss->pub.hidden_beacon_bss) |
| return false; |
| /* |
| * if it's a probe response entry break its |
| * link to the other entries in the group |
| */ |
| list_del_init(&bss->hidden_list); |
| } |
| |
| list_del_init(&bss->list); |
| rb_erase(&bss->rbn, &rdev->bss_tree); |
| rdev->bss_entries--; |
| WARN_ONCE((rdev->bss_entries == 0) ^ list_empty(&rdev->bss_list), |
| "rdev bss entries[%d]/list[empty:%d] corruption\n", |
| rdev->bss_entries, list_empty(&rdev->bss_list)); |
| bss_ref_put(rdev, bss); |
| return true; |
| } |
| |
| static void __cfg80211_bss_expire(struct cfg80211_registered_device *rdev, |
| unsigned long expire_time) |
| { |
| struct cfg80211_internal_bss *bss, *tmp; |
| bool expired = false; |
| |
| lockdep_assert_held(&rdev->bss_lock); |
| |
| list_for_each_entry_safe(bss, tmp, &rdev->bss_list, list) { |
| if (atomic_read(&bss->hold)) |
| continue; |
| if (!time_after(expire_time, bss->ts)) |
| continue; |
| |
| if (__cfg80211_unlink_bss(rdev, bss)) |
| expired = true; |
| } |
| |
| if (expired) |
| rdev->bss_generation++; |
| } |
| |
| static bool cfg80211_bss_expire_oldest(struct cfg80211_registered_device *rdev) |
| { |
| struct cfg80211_internal_bss *bss, *oldest = NULL; |
| bool ret; |
| |
| lockdep_assert_held(&rdev->bss_lock); |
| |
| list_for_each_entry(bss, &rdev->bss_list, list) { |
| if (atomic_read(&bss->hold)) |
| continue; |
| |
| if (!list_empty(&bss->hidden_list) && |
| !bss->pub.hidden_beacon_bss) |
| continue; |
| |
| if (oldest && time_before(oldest->ts, bss->ts)) |
| continue; |
| oldest = bss; |
| } |
| |
| if (WARN_ON(!oldest)) |
| return false; |
| |
| /* |
| * The callers make sure to increase rdev->bss_generation if anything |
| * gets removed (and a new entry added), so there's no need to also do |
| * it here. |
| */ |
| |
| ret = __cfg80211_unlink_bss(rdev, oldest); |
| WARN_ON(!ret); |
| return ret; |
| } |
| |
| void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, |
| bool send_message) |
| { |
| struct cfg80211_scan_request *request; |
| struct wireless_dev *wdev; |
| struct sk_buff *msg; |
| #ifdef CONFIG_CFG80211_WEXT |
| union iwreq_data wrqu; |
| #endif |
| |
| ASSERT_RTNL(); |
| |
| if (rdev->scan_msg) { |
| nl80211_send_scan_result(rdev, rdev->scan_msg); |
| rdev->scan_msg = NULL; |
| return; |
| } |
| |
| request = rdev->scan_req; |
| if (!request) |
| return; |
| |
| wdev = request->wdev; |
| |
| /* |
| * This must be before sending the other events! |
| * Otherwise, wpa_supplicant gets completely confused with |
| * wext events. |
| */ |
| if (wdev->netdev) |
| cfg80211_sme_scan_done(wdev->netdev); |
| |
| if (!request->info.aborted && |
| request->flags & NL80211_SCAN_FLAG_FLUSH) { |
| /* flush entries from previous scans */ |
| spin_lock_bh(&rdev->bss_lock); |
| __cfg80211_bss_expire(rdev, request->scan_start); |
| spin_unlock_bh(&rdev->bss_lock); |
| } |
| |
| msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted); |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| if (wdev->netdev && !request->info.aborted) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| |
| wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); |
| } |
| #endif |
| |
| if (wdev->netdev) |
| dev_put(wdev->netdev); |
| |
| rdev->scan_req = NULL; |
| kfree(request); |
| |
| if (!send_message) |
| rdev->scan_msg = msg; |
| else |
| nl80211_send_scan_result(rdev, msg); |
| } |
| |
| void __cfg80211_scan_done(struct work_struct *wk) |
| { |
| struct cfg80211_registered_device *rdev; |
| |
| rdev = container_of(wk, struct cfg80211_registered_device, |
| scan_done_wk); |
| |
| rtnl_lock(); |
| ___cfg80211_scan_done(rdev, true); |
| rtnl_unlock(); |
| } |
| |
| void cfg80211_scan_done(struct cfg80211_scan_request *request, |
| struct cfg80211_scan_info *info) |
| { |
| trace_cfg80211_scan_done(request, info); |
| WARN_ON(request != wiphy_to_rdev(request->wiphy)->scan_req); |
| |
| request->info = *info; |
| request->notified = true; |
| queue_work(cfg80211_wq, &wiphy_to_rdev(request->wiphy)->scan_done_wk); |
| } |
| EXPORT_SYMBOL(cfg80211_scan_done); |
| |
| void __cfg80211_sched_scan_results(struct work_struct *wk) |
| { |
| struct cfg80211_registered_device *rdev; |
| struct cfg80211_sched_scan_request *request; |
| |
| rdev = container_of(wk, struct cfg80211_registered_device, |
| sched_scan_results_wk); |
| |
| rtnl_lock(); |
| |
| request = rtnl_dereference(rdev->sched_scan_req); |
| |
| /* we don't have sched_scan_req anymore if the scan is stopping */ |
| if (request) { |
| if (request->flags & NL80211_SCAN_FLAG_FLUSH) { |
| /* flush entries from previous scans */ |
| spin_lock_bh(&rdev->bss_lock); |
| __cfg80211_bss_expire(rdev, request->scan_start); |
| spin_unlock_bh(&rdev->bss_lock); |
| request->scan_start = jiffies; |
| } |
| nl80211_send_sched_scan_results(rdev, request->dev); |
| } |
| |
| rtnl_unlock(); |
| } |
| |
| void cfg80211_sched_scan_results(struct wiphy *wiphy) |
| { |
| trace_cfg80211_sched_scan_results(wiphy); |
| /* ignore if we're not scanning */ |
| |
| if (rcu_access_pointer(wiphy_to_rdev(wiphy)->sched_scan_req)) |
| queue_work(cfg80211_wq, |
| &wiphy_to_rdev(wiphy)->sched_scan_results_wk); |
| } |
| EXPORT_SYMBOL(cfg80211_sched_scan_results); |
| |
| void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| |
| ASSERT_RTNL(); |
| |
| trace_cfg80211_sched_scan_stopped(wiphy); |
| |
| __cfg80211_stop_sched_scan(rdev, true); |
| } |
| EXPORT_SYMBOL(cfg80211_sched_scan_stopped_rtnl); |
| |
| void cfg80211_sched_scan_stopped(struct wiphy *wiphy) |
| { |
| rtnl_lock(); |
| cfg80211_sched_scan_stopped_rtnl(wiphy); |
| rtnl_unlock(); |
| } |
| EXPORT_SYMBOL(cfg80211_sched_scan_stopped); |
| |
| int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, |
| bool driver_initiated) |
| { |
| struct cfg80211_sched_scan_request *sched_scan_req; |
| struct net_device *dev; |
| |
| ASSERT_RTNL(); |
| |
| if (!rdev->sched_scan_req) |
| return -ENOENT; |
| |
| sched_scan_req = rtnl_dereference(rdev->sched_scan_req); |
| dev = sched_scan_req->dev; |
| |
| if (!driver_initiated) { |
| int err = rdev_sched_scan_stop(rdev, dev); |
| if (err) |
| return err; |
| } |
| |
| nl80211_send_sched_scan(rdev, dev, NL80211_CMD_SCHED_SCAN_STOPPED); |
| |
| RCU_INIT_POINTER(rdev->sched_scan_req, NULL); |
| kfree_rcu(sched_scan_req, rcu_head); |
| |
| return 0; |
| } |
| |
| void cfg80211_bss_age(struct cfg80211_registered_device *rdev, |
| unsigned long age_secs) |
| { |
| struct cfg80211_internal_bss *bss; |
| unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC); |
| |
| spin_lock_bh(&rdev->bss_lock); |
| list_for_each_entry(bss, &rdev->bss_list, list) |
| bss->ts -= age_jiffies; |
| spin_unlock_bh(&rdev->bss_lock); |
| } |
| |
| void cfg80211_bss_expire(struct cfg80211_registered_device *rdev) |
| { |
| __cfg80211_bss_expire(rdev, jiffies - IEEE80211_SCAN_RESULT_EXPIRE); |
| } |
| |
| const u8 *cfg80211_find_ie_match(u8 eid, const u8 *ies, int len, |
| const u8 *match, int match_len, |
| int match_offset) |
| { |
| const struct element *elem; |
| |
| /* match_offset can't be smaller than 2, unless match_len is |
| * zero, in which case match_offset must be zero as well. |
| */ |
| if (WARN_ON((match_len && match_offset < 2) || |
| (!match_len && match_offset))) |
| return NULL; |
| |
| for_each_element_id(elem, eid, ies, len) { |
| if (elem->datalen >= match_offset - 2 + match_len && |
| !memcmp(elem->data + match_offset - 2, match, match_len)) |
| return (void *)elem; |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(cfg80211_find_ie_match); |
| |
| const u8 *cfg80211_find_vendor_ie(unsigned int oui, int oui_type, |
| const u8 *ies, int len) |
| { |
| const u8 *ie; |
| u8 match[] = { oui >> 16, oui >> 8, oui, oui_type }; |
| int match_len = (oui_type < 0) ? 3 : sizeof(match); |
| |
| if (WARN_ON(oui_type > 0xff)) |
| return NULL; |
| |
| ie = cfg80211_find_ie_match(WLAN_EID_VENDOR_SPECIFIC, ies, len, |
| match, match_len, 2); |
| |
| if (ie && (ie[1] < 4)) |
| return NULL; |
| |
| return ie; |
| } |
| EXPORT_SYMBOL(cfg80211_find_vendor_ie); |
| |
| static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, |
| const u8 *ssid, size_t ssid_len) |
| { |
| const struct cfg80211_bss_ies *ies; |
| const u8 *ssidie; |
| |
| if (bssid && !ether_addr_equal(a->bssid, bssid)) |
| return false; |
| |
| if (!ssid) |
| return true; |
| |
| ies = rcu_access_pointer(a->ies); |
| if (!ies) |
| return false; |
| ssidie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); |
| if (!ssidie) |
| return false; |
| if (ssidie[1] != ssid_len) |
| return false; |
| return memcmp(ssidie + 2, ssid, ssid_len) == 0; |
| } |
| |
| /** |
| * enum bss_compare_mode - BSS compare mode |
| * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) |
| * @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode |
| * @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode |
| */ |
| enum bss_compare_mode { |
| BSS_CMP_REGULAR, |
| BSS_CMP_HIDE_ZLEN, |
| BSS_CMP_HIDE_NUL, |
| }; |
| |
| static int cmp_bss(struct cfg80211_bss *a, |
| struct cfg80211_bss *b, |
| enum bss_compare_mode mode) |
| { |
| const struct cfg80211_bss_ies *a_ies, *b_ies; |
| const u8 *ie1 = NULL; |
| const u8 *ie2 = NULL; |
| int i, r; |
| |
| if (a->channel != b->channel) |
| return b->channel->center_freq - a->channel->center_freq; |
| |
| a_ies = rcu_access_pointer(a->ies); |
| if (!a_ies) |
| return -1; |
| b_ies = rcu_access_pointer(b->ies); |
| if (!b_ies) |
| return 1; |
| |
| if (WLAN_CAPABILITY_IS_STA_BSS(a->capability)) |
| ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID, |
| a_ies->data, a_ies->len); |
| if (WLAN_CAPABILITY_IS_STA_BSS(b->capability)) |
| ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID, |
| b_ies->data, b_ies->len); |
| if (ie1 && ie2) { |
| int mesh_id_cmp; |
| |
| if (ie1[1] == ie2[1]) |
| mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]); |
| else |
| mesh_id_cmp = ie2[1] - ie1[1]; |
| |
| ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, |
| a_ies->data, a_ies->len); |
| ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, |
| b_ies->data, b_ies->len); |
| if (ie1 && ie2) { |
| if (mesh_id_cmp) |
| return mesh_id_cmp; |
| if (ie1[1] != ie2[1]) |
| return ie2[1] - ie1[1]; |
| return memcmp(ie1 + 2, ie2 + 2, ie1[1]); |
| } |
| } |
| |
| r = memcmp(a->bssid, b->bssid, sizeof(a->bssid)); |
| if (r) |
| return r; |
| |
| ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); |
| ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); |
| |
| if (!ie1 && !ie2) |
| return 0; |
| |
| /* |
| * Note that with "hide_ssid", the function returns a match if |
| * the already-present BSS ("b") is a hidden SSID beacon for |
| * the new BSS ("a"). |
| */ |
| |
| /* sort missing IE before (left of) present IE */ |
| if (!ie1) |
| return -1; |
| if (!ie2) |
| return 1; |
| |
| switch (mode) { |
| case BSS_CMP_HIDE_ZLEN: |
| /* |
| * In ZLEN mode we assume the BSS entry we're |
| * looking for has a zero-length SSID. So if |
| * the one we're looking at right now has that, |
| * return 0. Otherwise, return the difference |
| * in length, but since we're looking for the |
| * 0-length it's really equivalent to returning |
| * the length of the one we're looking at. |
| * |
| * No content comparison is needed as we assume |
| * the content length is zero. |
| */ |
| return ie2[1]; |
| case BSS_CMP_REGULAR: |
| default: |
| /* sort by length first, then by contents */ |
| if (ie1[1] != ie2[1]) |
| return ie2[1] - ie1[1]; |
| return memcmp(ie1 + 2, ie2 + 2, ie1[1]); |
| case BSS_CMP_HIDE_NUL: |
| if (ie1[1] != ie2[1]) |
| return ie2[1] - ie1[1]; |
| /* this is equivalent to memcmp(zeroes, ie2 + 2, len) */ |
| for (i = 0; i < ie2[1]; i++) |
| if (ie2[i + 2]) |
| return -1; |
| return 0; |
| } |
| } |
| |
| static bool cfg80211_bss_type_match(u16 capability, |
| enum nl80211_band band, |
| enum ieee80211_bss_type bss_type) |
| { |
| bool ret = true; |
| u16 mask, val; |
| |
| if (bss_type == IEEE80211_BSS_TYPE_ANY) |
| return ret; |
| |
| if (band == NL80211_BAND_60GHZ) { |
| mask = WLAN_CAPABILITY_DMG_TYPE_MASK; |
| switch (bss_type) { |
| case IEEE80211_BSS_TYPE_ESS: |
| val = WLAN_CAPABILITY_DMG_TYPE_AP; |
| break; |
| case IEEE80211_BSS_TYPE_PBSS: |
| val = WLAN_CAPABILITY_DMG_TYPE_PBSS; |
| break; |
| case IEEE80211_BSS_TYPE_IBSS: |
| val = WLAN_CAPABILITY_DMG_TYPE_IBSS; |
| break; |
| default: |
| return false; |
| } |
| } else { |
| mask = WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS; |
| switch (bss_type) { |
| case IEEE80211_BSS_TYPE_ESS: |
| val = WLAN_CAPABILITY_ESS; |
| break; |
| case IEEE80211_BSS_TYPE_IBSS: |
| val = WLAN_CAPABILITY_IBSS; |
| break; |
| case IEEE80211_BSS_TYPE_MBSS: |
| val = 0; |
| break; |
| default: |
| return false; |
| } |
| } |
| |
| ret = ((capability & mask) == val); |
| return ret; |
| } |
| |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ |
| struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| const u8 *bssid, |
| const u8 *ssid, size_t ssid_len, |
| enum ieee80211_bss_type bss_type, |
| enum ieee80211_privacy privacy) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| struct cfg80211_internal_bss *bss, *res = NULL; |
| unsigned long now = jiffies; |
| int bss_privacy; |
| |
| trace_cfg80211_get_bss(wiphy, channel, bssid, ssid, ssid_len, bss_type, |
| privacy); |
| |
| spin_lock_bh(&rdev->bss_lock); |
| |
| list_for_each_entry(bss, &rdev->bss_list, list) { |
| if (!cfg80211_bss_type_match(bss->pub.capability, |
| bss->pub.channel->band, bss_type)) |
| continue; |
| |
| bss_privacy = (bss->pub.capability & WLAN_CAPABILITY_PRIVACY); |
| if ((privacy == IEEE80211_PRIVACY_ON && !bss_privacy) || |
| (privacy == IEEE80211_PRIVACY_OFF && bss_privacy)) |
| continue; |
| if (channel && bss->pub.channel != channel) |
| continue; |
| if (!is_valid_ether_addr(bss->pub.bssid)) |
| continue; |
| /* Don't get expired BSS structs */ |
| if (time_after(now, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE) && |
| !atomic_read(&bss->hold)) |
| continue; |
| if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { |
| res = bss; |
| bss_ref_get(rdev, res); |
| break; |
| } |
| } |
| |
| spin_unlock_bh(&rdev->bss_lock); |
| if (!res) |
| return NULL; |
| trace_cfg80211_return_bss(&res->pub); |
| return &res->pub; |
| } |
| EXPORT_SYMBOL(cfg80211_get_bss); |
| |
| static void rb_insert_bss(struct cfg80211_registered_device *rdev, |
| struct cfg80211_internal_bss *bss) |
| { |
| struct rb_node **p = &rdev->bss_tree.rb_node; |
| struct rb_node *parent = NULL; |
| struct cfg80211_internal_bss *tbss; |
| int cmp; |
| |
| while (*p) { |
| parent = *p; |
| tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); |
| |
| cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR); |
| |
| if (WARN_ON(!cmp)) { |
| /* will sort of leak this BSS */ |
| return; |
| } |
| |
| if (cmp < 0) |
| p = &(*p)->rb_left; |
| else |
| p = &(*p)->rb_right; |
| } |
| |
| rb_link_node(&bss->rbn, parent, p); |
| rb_insert_color(&bss->rbn, &rdev->bss_tree); |
| } |
| |
| static struct cfg80211_internal_bss * |
| rb_find_bss(struct cfg80211_registered_device *rdev, |
| struct cfg80211_internal_bss *res, |
| enum bss_compare_mode mode) |
| { |
| struct rb_node *n = rdev->bss_tree.rb_node; |
| struct cfg80211_internal_bss *bss; |
| int r; |
| |
| while (n) { |
| bss = rb_entry(n, struct cfg80211_internal_bss, rbn); |
| r = cmp_bss(&res->pub, &bss->pub, mode); |
| |
| if (r == 0) |
| return bss; |
| else if (r < 0) |
| n = n->rb_left; |
| else |
| n = n->rb_right; |
| } |
| |
| return NULL; |
| } |
| |
| static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev, |
| struct cfg80211_internal_bss *new) |
| { |
| const struct cfg80211_bss_ies *ies; |
| struct cfg80211_internal_bss *bss; |
| const u8 *ie; |
| int i, ssidlen; |
| u8 fold = 0; |
| u32 n_entries = 0; |
| |
| ies = rcu_access_pointer(new->pub.beacon_ies); |
| if (WARN_ON(!ies)) |
| return false; |
| |
| ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); |
| if (!ie) { |
| /* nothing to do */ |
| return true; |
| } |
| |
| ssidlen = ie[1]; |
| for (i = 0; i < ssidlen; i++) |
| fold |= ie[2 + i]; |
| |
| if (fold) { |
| /* not a hidden SSID */ |
| return true; |
| } |
| |
| /* This is the bad part ... */ |
| |
| list_for_each_entry(bss, &rdev->bss_list, list) { |
| /* |
| * we're iterating all the entries anyway, so take the |
| * opportunity to validate the list length accounting |
| */ |
| n_entries++; |
| |
| if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) |
| continue; |
| if (bss->pub.channel != new->pub.channel) |
| continue; |
| if (bss->pub.scan_width != new->pub.scan_width) |
| continue; |
| if (rcu_access_pointer(bss->pub.beacon_ies)) |
| continue; |
| ies = rcu_access_pointer(bss->pub.ies); |
| if (!ies) |
| continue; |
| ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); |
| if (!ie) |
| continue; |
| if (ssidlen && ie[1] != ssidlen) |
| continue; |
| if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) |
| continue; |
| if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) |
| list_del(&bss->hidden_list); |
| /* combine them */ |
| list_add(&bss->hidden_list, &new->hidden_list); |
| bss->pub.hidden_beacon_bss = &new->pub; |
| new->refcount += bss->refcount; |
| rcu_assign_pointer(bss->pub.beacon_ies, |
| new->pub.beacon_ies); |
| } |
| |
| WARN_ONCE(n_entries != rdev->bss_entries, |
| "rdev bss entries[%d]/list[len:%d] corruption\n", |
| rdev->bss_entries, n_entries); |
| |
| return true; |
| } |
| |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ |
| static struct cfg80211_internal_bss * |
| cfg80211_bss_update(struct cfg80211_registered_device *rdev, |
| struct cfg80211_internal_bss *tmp, |
| bool signal_valid) |
| { |
| struct cfg80211_internal_bss *found = NULL; |
| |
| if (WARN_ON(!tmp->pub.channel)) |
| return NULL; |
| |
| tmp->ts = jiffies; |
| |
| spin_lock_bh(&rdev->bss_lock); |
| |
| if (WARN_ON(!rcu_access_pointer(tmp->pub.ies))) { |
| spin_unlock_bh(&rdev->bss_lock); |
| return NULL; |
| } |
| |
| found = rb_find_bss(rdev, tmp, BSS_CMP_REGULAR); |
| |
| if (found) { |
| /* Update IEs */ |
| if (rcu_access_pointer(tmp->pub.proberesp_ies)) { |
| const struct cfg80211_bss_ies *old; |
| |
| old = rcu_access_pointer(found->pub.proberesp_ies); |
| |
| rcu_assign_pointer(found->pub.proberesp_ies, |
| tmp->pub.proberesp_ies); |
| /* Override possible earlier Beacon frame IEs */ |
| rcu_assign_pointer(found->pub.ies, |
| tmp->pub.proberesp_ies); |
| if (old) |
| kfree_rcu((struct cfg80211_bss_ies *)old, |
| rcu_head); |
| } else if (rcu_access_pointer(tmp->pub.beacon_ies)) { |
| const struct cfg80211_bss_ies *old; |
| struct cfg80211_internal_bss *bss; |
| |
| if (found->pub.hidden_beacon_bss && |
| !list_empty(&found->hidden_list)) { |
| const struct cfg80211_bss_ies *f; |
| |
| /* |
| * The found BSS struct is one of the probe |
| * response members of a group, but we're |
| * receiving a beacon (beacon_ies in the tmp |
| * bss is used). This can only mean that the |
| * AP changed its beacon from not having an |
| * SSID to showing it, which is confusing so |
| * drop this information. |
| */ |
| |
| f = rcu_access_pointer(tmp->pub.beacon_ies); |
| kfree_rcu((struct cfg80211_bss_ies *)f, |
| rcu_head); |
| goto drop; |
| } |
| |
| old = rcu_access_pointer(found->pub.beacon_ies); |
| |
| rcu_assign_pointer(found->pub.beacon_ies, |
| tmp->pub.beacon_ies); |
| |
| /* Override IEs if they were from a beacon before */ |
| if (old == rcu_access_pointer(found->pub.ies)) |
| rcu_assign_pointer(found->pub.ies, |
| tmp->pub.beacon_ies); |
| |
| /* Assign beacon IEs to all sub entries */ |
| list_for_each_entry(bss, &found->hidden_list, |
| hidden_list) { |
| const struct cfg80211_bss_ies *ies; |
| |
| ies = rcu_access_pointer(bss->pub.beacon_ies); |
| WARN_ON(ies != old); |
| |
| rcu_assign_pointer(bss->pub.beacon_ies, |
| tmp->pub.beacon_ies); |
| } |
| |
| if (old) |
| kfree_rcu((struct cfg80211_bss_ies *)old, |
| rcu_head); |
| } |
| |
| found->pub.beacon_interval = tmp->pub.beacon_interval; |
| /* |
| * don't update the signal if beacon was heard on |
| * adjacent channel. |
| */ |
| if (signal_valid) |
| found->pub.signal = tmp->pub.signal; |
| found->pub.capability = tmp->pub.capability; |
| found->ts = tmp->ts; |
| found->ts_boottime = tmp->ts_boottime; |
| found->parent_tsf = tmp->parent_tsf; |
| ether_addr_copy(found->parent_bssid, tmp->parent_bssid); |
| } else { |
| struct cfg80211_internal_bss *new; |
| struct cfg80211_internal_bss *hidden; |
| struct cfg80211_bss_ies *ies; |
| |
| /* |
| * create a copy -- the "res" variable that is passed in |
| * is allocated on the stack since it's not needed in the |
| * more common case of an update |
| */ |
| new = kzalloc(sizeof(*new) + rdev->wiphy.bss_priv_size, |
| GFP_ATOMIC); |
| if (!new) { |
| ies = (void *)rcu_dereference(tmp->pub.beacon_ies); |
| if (ies) |
| kfree_rcu(ies, rcu_head); |
| ies = (void *)rcu_dereference(tmp->pub.proberesp_ies); |
| if (ies) |
| kfree_rcu(ies, rcu_head); |
| goto drop; |
| } |
| memcpy(new, tmp, sizeof(*new)); |
| new->refcount = 1; |
| INIT_LIST_HEAD(&new->hidden_list); |
| |
| if (rcu_access_pointer(tmp->pub.proberesp_ies)) { |
| hidden = rb_find_bss(rdev, tmp, BSS_CMP_HIDE_ZLEN); |
| if (!hidden) |
| hidden = rb_find_bss(rdev, tmp, |
| BSS_CMP_HIDE_NUL); |
| if (hidden) { |
| new->pub.hidden_beacon_bss = &hidden->pub; |
| list_add(&new->hidden_list, |
| &hidden->hidden_list); |
| hidden->refcount++; |
| rcu_assign_pointer(new->pub.beacon_ies, |
| hidden->pub.beacon_ies); |
| } |
| } else { |
| /* |
| * Ok so we found a beacon, and don't have an entry. If |
| * it's a beacon with hidden SSID, we might be in for an |
| * expensive search for any probe responses that should |
| * be grouped with this beacon for updates ... |
| */ |
| if (!cfg80211_combine_bsses(rdev, new)) { |
| kfree(new); |
| goto drop; |
| } |
| } |
| |
| if (rdev->bss_entries >= bss_entries_limit && |
| !cfg80211_bss_expire_oldest(rdev)) { |
| kfree(new); |
| goto drop; |
| } |
| |
| list_add_tail(&new->list, &rdev->bss_list); |
| rdev->bss_entries++; |
| rb_insert_bss(rdev, new); |
| found = new; |
| } |
| |
| rdev->bss_generation++; |
| bss_ref_get(rdev, found); |
| spin_unlock_bh(&rdev->bss_lock); |
| |
| return found; |
| drop: |
| spin_unlock_bh(&rdev->bss_lock); |
| return NULL; |
| } |
| |
| /* |
| * Update RX channel information based on the available frame payload |
| * information. This is mainly for the 2.4 GHz band where frames can be received |
| * from neighboring channels and the Beacon frames use the DSSS Parameter Set |
| * element to indicate the current (transmitting) channel, but this might also |
| * be needed on other bands if RX frequency does not match with the actual |
| * operating channel of a BSS. |
| */ |
| static struct ieee80211_channel * |
| cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen, |
| struct ieee80211_channel *channel, |
| enum nl80211_bss_scan_width scan_width) |
| { |
| const u8 *tmp; |
| u32 freq; |
| int channel_number = -1; |
| struct ieee80211_channel *alt_channel; |
| |
| tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen); |
| if (tmp && tmp[1] == 1) { |
| channel_number = tmp[2]; |
| } else { |
| tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen); |
| if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) { |
| struct ieee80211_ht_operation *htop = (void *)(tmp + 2); |
| |
| channel_number = htop->primary_chan; |
| } |
| } |
| |
| if (channel_number < 0) { |
| /* No channel information in frame payload */ |
| return channel; |
| } |
| |
| freq = ieee80211_channel_to_frequency(channel_number, channel->band); |
| alt_channel = ieee80211_get_channel(wiphy, freq); |
| if (!alt_channel) { |
| if (channel->band == NL80211_BAND_2GHZ) { |
| /* |
| * Better not allow unexpected channels when that could |
| * be going beyond the 1-11 range (e.g., discovering |
| * BSS on channel 12 when radio is configured for |
| * channel 11. |
| */ |
| return NULL; |
| } |
| |
| /* No match for the payload channel number - ignore it */ |
| return channel; |
| } |
| |
| if (scan_width == NL80211_BSS_CHAN_WIDTH_10 || |
| scan_width == NL80211_BSS_CHAN_WIDTH_5) { |
| /* |
| * Ignore channel number in 5 and 10 MHz channels where there |
| * may not be an n:1 or 1:n mapping between frequencies and |
| * channel numbers. |
| */ |
| return channel; |
| } |
| |
| /* |
| * Use the channel determined through the payload channel number |
| * instead of the RX channel reported by the driver. |
| */ |
| if (alt_channel->flags & IEEE80211_CHAN_DISABLED) |
| return NULL; |
| return alt_channel; |
| } |
| |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ |
| struct cfg80211_bss * |
| cfg80211_inform_bss_data(struct wiphy *wiphy, |
| struct cfg80211_inform_bss *data, |
| enum cfg80211_bss_frame_type ftype, |
| const u8 *bssid, u64 tsf, u16 capability, |
| u16 beacon_interval, const u8 *ie, size_t ielen, |
| gfp_t gfp) |
| { |
| struct cfg80211_bss_ies *ies; |
| struct ieee80211_channel *channel; |
| struct cfg80211_internal_bss tmp = {}, *res; |
| int bss_type; |
| bool signal_valid; |
| |
| if (WARN_ON(!wiphy)) |
| return NULL; |
| |
| if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && |
| (data->signal < 0 || data->signal > 100))) |
| return NULL; |
| |
| channel = cfg80211_get_bss_channel(wiphy, ie, ielen, data->chan, |
| data->scan_width); |
| if (!channel) |
| return NULL; |
| |
| memcpy(tmp.pub.bssid, bssid, ETH_ALEN); |
| tmp.pub.channel = channel; |
| tmp.pub.scan_width = data->scan_width; |
| tmp.pub.signal = data->signal; |
| tmp.pub.beacon_interval = beacon_interval; |
| tmp.pub.capability = capability; |
| tmp.ts_boottime = data->boottime_ns; |
| |
| /* |
| * If we do not know here whether the IEs are from a Beacon or Probe |
| * Response frame, we need to pick one of the options and only use it |
| * with the driver that does not provide the full Beacon/Probe Response |
| * frame. Use Beacon frame pointer to avoid indicating that this should |
| * override the IEs pointer should we have received an earlier |
| * indication of Probe Response data. |
| */ |
| ies = kzalloc(sizeof(*ies) + ielen, gfp); |
| if (!ies) |
| return NULL; |
| ies->len = ielen; |
| ies->tsf = tsf; |
| ies->from_beacon = false; |
| memcpy(ies->data, ie, ielen); |
| |
| switch (ftype) { |
| case CFG80211_BSS_FTYPE_BEACON: |
| ies->from_beacon = true; |
| /* fall through to assign */ |
| case CFG80211_BSS_FTYPE_UNKNOWN: |
| rcu_assign_pointer(tmp.pub.beacon_ies, ies); |
| break; |
| case CFG80211_BSS_FTYPE_PRESP: |
| rcu_assign_pointer(tmp.pub.proberesp_ies, ies); |
| break; |
| } |
| rcu_assign_pointer(tmp.pub.ies, ies); |
| |
| signal_valid = abs(data->chan->center_freq - channel->center_freq) <= |
| wiphy->max_adj_channel_rssi_comp; |
| res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid); |
| if (!res) |
| return NULL; |
| |
| if (channel->band == NL80211_BAND_60GHZ) { |
| bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK; |
| if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP || |
| bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS) |
| regulatory_hint_found_beacon(wiphy, channel, gfp); |
| } else { |
| if (res->pub.capability & WLAN_CAPABILITY_ESS) |
| regulatory_hint_found_beacon(wiphy, channel, gfp); |
| } |
| |
| trace_cfg80211_return_bss(&res->pub); |
| /* cfg80211_bss_update gives us a referenced result */ |
| return &res->pub; |
| } |
| EXPORT_SYMBOL(cfg80211_inform_bss_data); |
| |
| /* cfg80211_inform_bss_width_frame helper */ |
| struct cfg80211_bss * |
| cfg80211_inform_bss_frame_data(struct wiphy *wiphy, |
| struct cfg80211_inform_bss *data, |
| struct ieee80211_mgmt *mgmt, size_t len, |
| gfp_t gfp) |
| |
| { |
| struct cfg80211_internal_bss tmp = {}, *res; |
| struct cfg80211_bss_ies *ies; |
| struct ieee80211_channel *channel; |
| bool signal_valid; |
| size_t ielen = len - offsetof(struct ieee80211_mgmt, |
| u.probe_resp.variable); |
| int bss_type; |
| |
| BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) != |
| offsetof(struct ieee80211_mgmt, u.beacon.variable)); |
| |
| trace_cfg80211_inform_bss_frame(wiphy, data, mgmt, len); |
| |
| if (WARN_ON(!mgmt)) |
| return NULL; |
| |
| if (WARN_ON(!wiphy)) |
| return NULL; |
| |
| if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && |
| (data->signal < 0 || data->signal > 100))) |
| return NULL; |
| |
| if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable))) |
| return NULL; |
| |
| channel = cfg80211_get_bss_channel(wiphy, mgmt->u.beacon.variable, |
| ielen, data->chan, data->scan_width); |
| if (!channel) |
| return NULL; |
| |
| ies = kzalloc(sizeof(*ies) + ielen, gfp); |
| if (!ies) |
| return NULL; |
| ies->len = ielen; |
| ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); |
| ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control); |
| memcpy(ies->data, mgmt->u.probe_resp.variable, ielen); |
| |
| if (ieee80211_is_probe_resp(mgmt->frame_control)) |
| rcu_assign_pointer(tmp.pub.proberesp_ies, ies); |
| else |
| rcu_assign_pointer(tmp.pub.beacon_ies, ies); |
| rcu_assign_pointer(tmp.pub.ies, ies); |
| |
| memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN); |
| tmp.pub.channel = channel; |
| tmp.pub.scan_width = data->scan_width; |
| tmp.pub.signal = data->signal; |
| tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); |
| tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); |
| tmp.ts_boottime = data->boottime_ns; |
| tmp.parent_tsf = data->parent_tsf; |
| ether_addr_copy(tmp.parent_bssid, data->parent_bssid); |
| |
| signal_valid = abs(data->chan->center_freq - channel->center_freq) <= |
| wiphy->max_adj_channel_rssi_comp; |
| res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid); |
| if (!res) |
| return NULL; |
| |
| if (channel->band == NL80211_BAND_60GHZ) { |
| bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK; |
| if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP || |
| bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS) |
| regulatory_hint_found_beacon(wiphy, channel, gfp); |
| } else { |
| if (res->pub.capability & WLAN_CAPABILITY_ESS) |
| regulatory_hint_found_beacon(wiphy, channel, gfp); |
| } |
| |
| trace_cfg80211_return_bss(&res->pub); |
| /* cfg80211_bss_update gives us a referenced result */ |
| return &res->pub; |
| } |
| EXPORT_SYMBOL(cfg80211_inform_bss_frame_data); |
| |
| void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| struct cfg80211_internal_bss *bss; |
| |
| if (!pub) |
| return; |
| |
| bss = container_of(pub, struct cfg80211_internal_bss, pub); |
| |
| spin_lock_bh(&rdev->bss_lock); |
| bss_ref_get(rdev, bss); |
| spin_unlock_bh(&rdev->bss_lock); |
| } |
| EXPORT_SYMBOL(cfg80211_ref_bss); |
| |
| void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| struct cfg80211_internal_bss *bss; |
| |
| if (!pub) |
| return; |
| |
| bss = container_of(pub, struct cfg80211_internal_bss, pub); |
| |
| spin_lock_bh(&rdev->bss_lock); |
| bss_ref_put(rdev, bss); |
| spin_unlock_bh(&rdev->bss_lock); |
| } |
| EXPORT_SYMBOL(cfg80211_put_bss); |
| |
| void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| struct cfg80211_internal_bss *bss; |
| |
| if (WARN_ON(!pub)) |
| return; |
| |
| bss = container_of(pub, struct cfg80211_internal_bss, pub); |
| |
| spin_lock_bh(&rdev->bss_lock); |
| if (!list_empty(&bss->list)) { |
| if (__cfg80211_unlink_bss(rdev, bss)) |
| rdev->bss_generation++; |
| } |
| spin_unlock_bh(&rdev->bss_lock); |
| } |
| EXPORT_SYMBOL(cfg80211_unlink_bss); |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| static struct cfg80211_registered_device * |
| cfg80211_get_dev_from_ifindex(struct net *net, int ifindex) |
| { |
| struct cfg80211_registered_device *rdev; |
| struct net_device *dev; |
| |
| ASSERT_RTNL(); |
| |
| dev = dev_get_by_index(net, ifindex); |
| if (!dev) |
| return ERR_PTR(-ENODEV); |
| if (dev->ieee80211_ptr) |
| rdev = wiphy_to_rdev(dev->ieee80211_ptr->wiphy); |
| else |
| rdev = ERR_PTR(-ENODEV); |
| dev_put(dev); |
| return rdev; |
| } |
| |
| int cfg80211_wext_siwscan(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct cfg80211_registered_device *rdev; |
| struct wiphy *wiphy; |
| struct iw_scan_req *wreq = NULL; |
| struct cfg80211_scan_request *creq = NULL; |
| int i, err, n_channels = 0; |
| enum nl80211_band band; |
| |
| if (!netif_running(dev)) |
| return -ENETDOWN; |
| |
| if (wrqu->data.length == sizeof(struct iw_scan_req)) |
| wreq = (struct iw_scan_req *)extra; |
| |
| rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); |
| |
| if (IS_ERR(rdev)) |
| return PTR_ERR(rdev); |
| |
| if (rdev->scan_req || rdev->scan_msg) { |
| err = -EBUSY; |
| goto out; |
| } |
| |
| wiphy = &rdev->wiphy; |
| |
| /* Determine number of channels, needed to allocate creq */ |
| if (wreq && wreq->num_channels) |
| n_channels = wreq->num_channels; |
| else |
| n_channels = ieee80211_get_num_supported_channels(wiphy); |
| |
| creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + |
| n_channels * sizeof(void *), |
| GFP_ATOMIC); |
| if (!creq) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| creq->wiphy = wiphy; |
| creq->wdev = dev->ieee80211_ptr; |
| /* SSIDs come after channels */ |
| creq->ssids = (void *)&creq->channels[n_channels]; |
| creq->n_channels = n_channels; |
| creq->n_ssids = 1; |
| creq->scan_start = jiffies; |
| |
| /* translate "Scan on frequencies" request */ |
| i = 0; |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| int j; |
| |
| if (!wiphy->bands[band]) |
| continue; |
| |
| for (j = 0; j < wiphy->bands[band]->n_channels; j++) { |
| /* ignore disabled channels */ |
| if (wiphy->bands[band]->channels[j].flags & |
| IEEE80211_CHAN_DISABLED) |
| continue; |
| |
| /* If we have a wireless request structure and the |
| * wireless request specifies frequencies, then search |
| * for the matching hardware channel. |
| */ |
| if (wreq && wreq->num_channels) { |
| int k; |
| int wiphy_freq = wiphy->bands[band]->channels[j].center_freq; |
| for (k = 0; k < wreq->num_channels; k++) { |
| struct iw_freq *freq = |
| &wreq->channel_list[k]; |
| int wext_freq = |
| cfg80211_wext_freq(freq); |
| |
| if (wext_freq == wiphy_freq) |
| goto wext_freq_found; |
| } |
| goto wext_freq_not_found; |
| } |
| |
| wext_freq_found: |
| creq->channels[i] = &wiphy->bands[band]->channels[j]; |
| i++; |
| wext_freq_not_found: ; |
| } |
| } |
| /* No channels found? */ |
| if (!i) { |
| err = -EINVAL; |
| goto out; |
| } |
| |
| /* Set real number of channels specified in creq->channels[] */ |
| creq->n_channels = i; |
| |
| /* translate "Scan for SSID" request */ |
| if (wreq) { |
| if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { |
| if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { |
| err = -EINVAL; |
| goto out; |
| } |
| memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); |
| creq->ssids[0].ssid_len = wreq->essid_len; |
| } |
| if (wreq->scan_type == IW_SCAN_TYPE_PASSIVE) |
| creq->n_ssids = 0; |
| } |
| |
| for (i = 0; i < NUM_NL80211_BANDS; i++) |
| if (wiphy->bands[i]) |
| creq->rates[i] = (1 << wiphy->bands[i]->n_bitrates) - 1; |
| |
| eth_broadcast_addr(creq->bssid); |
| |
| rdev->scan_req = creq; |
| err = rdev_scan(rdev, creq); |
| if (err) { |
| rdev->scan_req = NULL; |
| /* creq will be freed below */ |
| } else { |
| nl80211_send_scan_start(rdev, dev->ieee80211_ptr); |
| /* creq now owned by driver */ |
| creq = NULL; |
| dev_hold(dev); |
| } |
| out: |
| kfree(creq); |
| return err; |
| } |
| EXPORT_WEXT_HANDLER(cfg80211_wext_siwscan); |
| |
| static char *ieee80211_scan_add_ies(struct iw_request_info *info, |
| const struct cfg80211_bss_ies *ies, |
| char *current_ev, char *end_buf) |
| { |
| const u8 *pos, *end, *next; |
| struct iw_event iwe; |
| |
| if (!ies) |
| return current_ev; |
| |
| /* |
| * If needed, fragment the IEs buffer (at IE boundaries) into short |
| * enough fragments to fit into IW_GENERIC_IE_MAX octet messages. |
| */ |
| pos = ies->data; |
| end = pos + ies->len; |
| |
| while (end - pos > IW_GENERIC_IE_MAX) { |
| next = pos + 2 + pos[1]; |
| while (next + 2 + next[1] - pos < IW_GENERIC_IE_MAX) |
| next = next + 2 + next[1]; |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVGENIE; |
| iwe.u.data.length = next - pos; |
| current_ev = iwe_stream_add_point_check(info, current_ev, |
| end_buf, &iwe, |
| (void *)pos); |
| if (IS_ERR(current_ev)) |
| return current_ev; |
| pos = next; |
| } |
| |
| if (end > pos) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVGENIE; |
| iwe.u.data.length = end - pos; |
| current_ev = iwe_stream_add_point_check(info, current_ev, |
| end_buf, &iwe, |
| (void *)pos); |
| if (IS_ERR(current_ev)) |
| return current_ev; |
| } |
| |
| return current_ev; |
| } |
| |
| static char * |
| ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, |
| struct cfg80211_internal_bss *bss, char *current_ev, |
| char *end_buf) |
| { |
| const struct cfg80211_bss_ies *ies; |
| struct iw_event iwe; |
| const u8 *ie; |
| u8 buf[50]; |
| u8 *cfg, *p, *tmp; |
| int rem, i, sig; |
| bool ismesh = false; |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWAP; |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(iwe.u.ap_addr.sa_data, bss->pub.bssid, ETH_ALEN); |
| current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, |
| IW_EV_ADDR_LEN); |
| if (IS_ERR(current_ev)) |
| return current_ev; |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWFREQ; |
| iwe.u.freq.m = ieee80211_frequency_to_channel(bss->pub.channel->center_freq); |
| iwe.u.freq.e = 0; |
| current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, |
| IW_EV_FREQ_LEN); |
| if (IS_ERR(current_ev)) |
| return current_ev; |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWFREQ; |
| iwe.u.freq.m = bss->pub.channel->center_freq; |
| iwe.u.freq.e = 6; |
| current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, |
| IW_EV_FREQ_LEN); |
| if (IS_ERR(current_ev)) |
| return current_ev; |
| |
| if (wiphy->signal_type != CFG80211_SIGNAL_TYPE_NONE) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVQUAL; |
| iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED | |
| IW_QUAL_NOISE_INVALID | |
| IW_QUAL_QUAL_UPDATED; |
| switch (wiphy->signal_type) { |
| case CFG80211_SIGNAL_TYPE_MBM: |
| sig = bss->pub.signal / 100; |
| iwe.u.qual.level = sig; |
| iwe.u.qual.updated |= IW_QUAL_DBM; |
| if (sig < -110) /* rather bad */ |
| sig = -110; |
| else if (sig > -40) /* perfect */ |
| sig = -40; |
| /* will give a range of 0 .. 70 */ |
| iwe.u.qual.qual = sig + 110; |
| break; |
| case CFG80211_SIGNAL_TYPE_UNSPEC: |
| iwe.u.qual.level = bss->pub.signal; |
| /* will give range 0 .. 100 */ |
| iwe.u.qual.qual = bss->pub.signal; |
| break; |
| default: |
| /* not reached */ |
| break; |
| } |
| current_ev = iwe_stream_add_event_check(info, current_ev, |
| end_buf, &iwe, |
| IW_EV_QUAL_LEN); |
| if (IS_ERR(current_ev)) |
| return current_ev; |
| } |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWENCODE; |
| if (bss->pub.capability & WLAN_CAPABILITY_PRIVACY) |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; |
| else |
| iwe.u.data.flags = IW_ENCODE_DISABLED; |
| iwe.u.data.length = 0; |
| current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, |
| &iwe, ""); |
| if (IS_ERR(current_ev)) |
| return current_ev; |
| |
| rcu_read_lock(); |
| ies = rcu_dereference(bss->pub.ies); |
| rem = ies->len; |
| ie = ies->data; |
| |
| while (rem >= 2) { |
| /* invalid data */ |
| if (ie[1] > rem - 2) |
| break; |
| |
| switch (ie[0]) { |
| case WLAN_EID_SSID: |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWESSID; |
| iwe.u.data.length = ie[1]; |
| iwe.u.data.flags = 1; |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, &iwe, |
| (u8 *)ie + 2); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| break; |
| case WLAN_EID_MESH_ID: |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWESSID; |
| iwe.u.data.length = ie[1]; |
| iwe.u.data.flags = 1; |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, &iwe, |
| (u8 *)ie + 2); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| break; |
| case WLAN_EID_MESH_CONFIG: |
| ismesh = true; |
| if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) |
| break; |
| cfg = (u8 *)ie + 2; |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| sprintf(buf, "Mesh Network Path Selection Protocol ID: " |
| "0x%02X", cfg[0]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| sprintf(buf, "Path Selection Metric ID: 0x%02X", |
| cfg[1]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| sprintf(buf, "Congestion Control Mode ID: 0x%02X", |
| cfg[2]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| sprintf(buf, "Synchronization ID: 0x%02X", cfg[3]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| sprintf(buf, "Authentication ID: 0x%02X", cfg[4]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| sprintf(buf, "Formation Info: 0x%02X", cfg[5]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| sprintf(buf, "Capabilities: 0x%02X", cfg[6]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, |
| current_ev, |
| end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| break; |
| case WLAN_EID_SUPP_RATES: |
| case WLAN_EID_EXT_SUPP_RATES: |
| /* display all supported rates in readable format */ |
| p = current_ev + iwe_stream_lcp_len(info); |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWRATE; |
| /* Those two flags are ignored... */ |
| iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; |
| |
| for (i = 0; i < ie[1]; i++) { |
| iwe.u.bitrate.value = |
| ((ie[i + 2] & 0x7f) * 500000); |
| tmp = p; |
| p = iwe_stream_add_value(info, current_ev, p, |
| end_buf, &iwe, |
| IW_EV_PARAM_LEN); |
| if (p == tmp) { |
| current_ev = ERR_PTR(-E2BIG); |
| goto unlock; |
| } |
| } |
| current_ev = p; |
| break; |
| } |
| rem -= ie[1] + 2; |
| ie += ie[1] + 2; |
| } |
| |
| if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) || |
| ismesh) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWMODE; |
| if (ismesh) |
| iwe.u.mode = IW_MODE_MESH; |
| else if (bss->pub.capability & WLAN_CAPABILITY_ESS) |
| iwe.u.mode = IW_MODE_MASTER; |
| else |
| iwe.u.mode = IW_MODE_ADHOC; |
| current_ev = iwe_stream_add_event_check(info, current_ev, |
| end_buf, &iwe, |
| IW_EV_UINT_LEN); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| } |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf)); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, |
| &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| sprintf(buf, " Last beacon: %ums ago", |
| elapsed_jiffies_msecs(bss->ts)); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point_check(info, current_ev, |
| end_buf, &iwe, buf); |
| if (IS_ERR(current_ev)) |
| goto unlock; |
| |
| current_ev = ieee80211_scan_add_ies(info, ies, current_ev, end_buf); |
| |
| unlock: |
| rcu_read_unlock(); |
| return current_ev; |
| } |
| |
| |
| static int ieee80211_scan_results(struct cfg80211_registered_device *rdev, |
| struct iw_request_info *info, |
| char *buf, size_t len) |
| { |
| char *current_ev = buf; |
| char *end_buf = buf + len; |
| struct cfg80211_internal_bss *bss; |
| int err = 0; |
| |
| spin_lock_bh(&rdev->bss_lock); |
| cfg80211_bss_expire(rdev); |
| |
| list_for_each_entry(bss, &rdev->bss_list, list) { |
| if (buf + len - current_ev <= IW_EV_ADDR_LEN) { |
| err = -E2BIG; |
| break; |
| } |
| current_ev = ieee80211_bss(&rdev->wiphy, info, bss, |
| current_ev, end_buf); |
| if (IS_ERR(current_ev)) { |
| err = PTR_ERR(current_ev); |
| break; |
| } |
| } |
| spin_unlock_bh(&rdev->bss_lock); |
| |
| if (err) |
| return err; |
| return current_ev - buf; |
| } |
| |
| |
| int cfg80211_wext_giwscan(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct cfg80211_registered_device *rdev; |
| int res; |
| |
| if (!netif_running(dev)) |
| return -ENETDOWN; |
| |
| rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); |
| |
| if (IS_ERR(rdev)) |
| return PTR_ERR(rdev); |
| |
| if (rdev->scan_req || rdev->scan_msg) |
| return -EAGAIN; |
| |
| res = ieee80211_scan_results(rdev, info, extra, data->length); |
| data->length = 0; |
| if (res >= 0) { |
| data->length = res; |
| res = 0; |
| } |
| |
| return res; |
| } |
| EXPORT_WEXT_HANDLER(cfg80211_wext_giwscan); |
| #endif |