| /* |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Common Codes for EXYNOS |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip.h> |
| #include <linux/io.h> |
| #include <linux/device.h> |
| #include <linux/gpio.h> |
| #include <linux/sched.h> |
| #include <linux/serial_core.h> |
| #include <linux/of.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_irq.h> |
| #include <linux/export.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irqchip.h> |
| #include <linux/of_address.h> |
| #include <linux/irqchip/arm-gic.h> |
| |
| #include <asm/proc-fns.h> |
| #include <asm/exception.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| #include <asm/cacheflush.h> |
| |
| #include <mach/regs-irq.h> |
| #include <mach/regs-pmu.h> |
| #include <mach/regs-gpio.h> |
| |
| #include <plat/cpu.h> |
| #include <plat/clock.h> |
| #include <plat/devs.h> |
| #include <plat/pm.h> |
| #include <plat/sdhci.h> |
| #include <plat/gpio-cfg.h> |
| #include <plat/adc-core.h> |
| #include <plat/fb-core.h> |
| #include <plat/fimc-core.h> |
| #include <plat/iic-core.h> |
| #include <plat/tv-core.h> |
| #include <plat/spi-core.h> |
| #include <plat/regs-serial.h> |
| |
| #include "common.h" |
| #define L2_AUX_VAL 0x7C470001 |
| #define L2_AUX_MASK 0xC200ffff |
| |
| static const char name_exynos4210[] = "EXYNOS4210"; |
| static const char name_exynos4212[] = "EXYNOS4212"; |
| static const char name_exynos4412[] = "EXYNOS4412"; |
| static const char name_exynos5250[] = "EXYNOS5250"; |
| static const char name_exynos5440[] = "EXYNOS5440"; |
| |
| static void exynos4_map_io(void); |
| static void exynos5_map_io(void); |
| static void exynos5440_map_io(void); |
| static void exynos4_init_clocks(int xtal); |
| static void exynos5_init_clocks(int xtal); |
| static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); |
| static int exynos_init(void); |
| |
| static struct cpu_table cpu_ids[] __initdata = { |
| { |
| .idcode = EXYNOS4210_CPU_ID, |
| .idmask = EXYNOS4_CPU_MASK, |
| .map_io = exynos4_map_io, |
| .init_clocks = exynos4_init_clocks, |
| .init_uarts = exynos4_init_uarts, |
| .init = exynos_init, |
| .name = name_exynos4210, |
| }, { |
| .idcode = EXYNOS4212_CPU_ID, |
| .idmask = EXYNOS4_CPU_MASK, |
| .map_io = exynos4_map_io, |
| .init_clocks = exynos4_init_clocks, |
| .init_uarts = exynos4_init_uarts, |
| .init = exynos_init, |
| .name = name_exynos4212, |
| }, { |
| .idcode = EXYNOS4412_CPU_ID, |
| .idmask = EXYNOS4_CPU_MASK, |
| .map_io = exynos4_map_io, |
| .init_clocks = exynos4_init_clocks, |
| .init_uarts = exynos4_init_uarts, |
| .init = exynos_init, |
| .name = name_exynos4412, |
| }, { |
| .idcode = EXYNOS5250_SOC_ID, |
| .idmask = EXYNOS5_SOC_MASK, |
| .map_io = exynos5_map_io, |
| .init_clocks = exynos5_init_clocks, |
| .init = exynos_init, |
| .name = name_exynos5250, |
| }, { |
| .idcode = EXYNOS5440_SOC_ID, |
| .idmask = EXYNOS5_SOC_MASK, |
| .map_io = exynos5440_map_io, |
| .init = exynos_init, |
| .name = name_exynos5440, |
| }, |
| }; |
| |
| /* Initial IO mappings */ |
| |
| static struct map_desc exynos_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_CHIPID, |
| .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| #ifdef CONFIG_ARCH_EXYNOS5 |
| static struct map_desc exynos5440_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_CHIPID, |
| .pfn = __phys_to_pfn(EXYNOS5440_PA_CHIPID), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| #endif |
| |
| static struct map_desc exynos4_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S3C_VA_SYS, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_TIMER, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_WATCHDOG, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SROMC, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SYSTIMER, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_PMU, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_PMU), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_COMBINER_BASE, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GIC_CPU, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GIC_DIST, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_UART, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_UART), |
| .length = SZ_512K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_CMU, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), |
| .length = SZ_128K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_COREPERI_BASE, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), |
| .length = SZ_8K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_L2CC, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_DMC0, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_DMC1, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_DMC1), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_USB_HSPHY, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc exynos4_iodesc0[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_SYSRAM, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc exynos4_iodesc1[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_SYSRAM, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc exynos5_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S3C_VA_SYS, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_TIMER, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_WATCHDOG, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SROMC, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SYSTIMER, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SYSRAM, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_CMU, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), |
| .length = 144 * SZ_1K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_PMU, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_PMU), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_UART, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_UART), |
| .length = SZ_512K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc exynos5440_iodesc0[] __initdata = { |
| { |
| .virtual = (unsigned long)S3C_VA_UART, |
| .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0), |
| .length = SZ_512K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| void exynos4_restart(char mode, const char *cmd) |
| { |
| __raw_writel(0x1, S5P_SWRESET); |
| } |
| |
| void exynos5_restart(char mode, const char *cmd) |
| { |
| struct device_node *np; |
| u32 val; |
| void __iomem *addr; |
| |
| if (of_machine_is_compatible("samsung,exynos5250")) { |
| val = 0x1; |
| addr = EXYNOS_SWRESET; |
| } else if (of_machine_is_compatible("samsung,exynos5440")) { |
| np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); |
| addr = of_iomap(np, 0) + 0xcc; |
| val = (0xfff << 20) | (0x1 << 16); |
| } else { |
| pr_err("%s: cannot support non-DT\n", __func__); |
| return; |
| } |
| |
| __raw_writel(val, addr); |
| } |
| |
| void __init exynos_init_late(void) |
| { |
| if (of_machine_is_compatible("samsung,exynos5440")) |
| /* to be supported later */ |
| return; |
| |
| exynos_pm_late_initcall(); |
| } |
| |
| /* |
| * exynos_map_io |
| * |
| * register the standard cpu IO areas |
| */ |
| |
| void __init exynos_init_io(struct map_desc *mach_desc, int size) |
| { |
| struct map_desc *iodesc = exynos_iodesc; |
| int iodesc_sz = ARRAY_SIZE(exynos_iodesc); |
| #if defined(CONFIG_OF) && defined(CONFIG_ARCH_EXYNOS5) |
| unsigned long root = of_get_flat_dt_root(); |
| |
| /* initialize the io descriptors we need for initialization */ |
| if (of_flat_dt_is_compatible(root, "samsung,exynos5440")) { |
| iodesc = exynos5440_iodesc; |
| iodesc_sz = ARRAY_SIZE(exynos5440_iodesc); |
| } |
| #endif |
| |
| iotable_init(iodesc, iodesc_sz); |
| |
| if (mach_desc) |
| iotable_init(mach_desc, size); |
| |
| /* detect cpu id and rev. */ |
| s5p_init_cpu(S5P_VA_CHIPID); |
| |
| s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); |
| } |
| |
| static void __init exynos4_map_io(void) |
| { |
| iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); |
| |
| if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) |
| iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0)); |
| else |
| iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); |
| |
| /* initialize device information early */ |
| exynos4_default_sdhci0(); |
| exynos4_default_sdhci1(); |
| exynos4_default_sdhci2(); |
| exynos4_default_sdhci3(); |
| |
| s3c_adc_setname("samsung-adc-v3"); |
| |
| s3c_fimc_setname(0, "exynos4-fimc"); |
| s3c_fimc_setname(1, "exynos4-fimc"); |
| s3c_fimc_setname(2, "exynos4-fimc"); |
| s3c_fimc_setname(3, "exynos4-fimc"); |
| |
| s3c_sdhci_setname(0, "exynos4-sdhci"); |
| s3c_sdhci_setname(1, "exynos4-sdhci"); |
| s3c_sdhci_setname(2, "exynos4-sdhci"); |
| s3c_sdhci_setname(3, "exynos4-sdhci"); |
| |
| /* The I2C bus controllers are directly compatible with s3c2440 */ |
| s3c_i2c0_setname("s3c2440-i2c"); |
| s3c_i2c1_setname("s3c2440-i2c"); |
| s3c_i2c2_setname("s3c2440-i2c"); |
| |
| s5p_fb_setname(0, "exynos4-fb"); |
| s5p_hdmi_setname("exynos4-hdmi"); |
| |
| s3c64xx_spi_setname("exynos4210-spi"); |
| } |
| |
| static void __init exynos5_map_io(void) |
| { |
| iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); |
| } |
| |
| static void __init exynos4_init_clocks(int xtal) |
| { |
| printk(KERN_DEBUG "%s: initializing clocks\n", __func__); |
| |
| s3c24xx_register_baseclocks(xtal); |
| s5p_register_clocks(xtal); |
| |
| if (soc_is_exynos4210()) |
| exynos4210_register_clocks(); |
| else if (soc_is_exynos4212() || soc_is_exynos4412()) |
| exynos4212_register_clocks(); |
| |
| exynos4_register_clocks(); |
| exynos4_setup_clocks(); |
| } |
| |
| static void __init exynos5440_map_io(void) |
| { |
| iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); |
| } |
| |
| static void __init exynos5_init_clocks(int xtal) |
| { |
| printk(KERN_DEBUG "%s: initializing clocks\n", __func__); |
| |
| /* EXYNOS5440 can support only common clock framework */ |
| |
| if (soc_is_exynos5440()) |
| return; |
| |
| #ifdef CONFIG_SOC_EXYNOS5250 |
| s3c24xx_register_baseclocks(xtal); |
| s5p_register_clocks(xtal); |
| |
| exynos5_register_clocks(); |
| exynos5_setup_clocks(); |
| #endif |
| } |
| |
| void __init exynos4_init_irq(void) |
| { |
| unsigned int gic_bank_offset; |
| |
| gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; |
| |
| if (!of_have_populated_dt()) |
| gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); |
| #ifdef CONFIG_OF |
| else |
| irqchip_init(); |
| #endif |
| |
| if (!of_have_populated_dt()) |
| combiner_init(S5P_VA_COMBINER_BASE, NULL); |
| |
| /* |
| * The parameters of s5p_init_irq() are for VIC init. |
| * Theses parameters should be NULL and 0 because EXYNOS4 |
| * uses GIC instead of VIC. |
| */ |
| s5p_init_irq(NULL, 0); |
| } |
| |
| void __init exynos5_init_irq(void) |
| { |
| #ifdef CONFIG_OF |
| irqchip_init(); |
| #endif |
| /* |
| * The parameters of s5p_init_irq() are for VIC init. |
| * Theses parameters should be NULL and 0 because EXYNOS4 |
| * uses GIC instead of VIC. |
| */ |
| if (!of_machine_is_compatible("samsung,exynos5440")) |
| s5p_init_irq(NULL, 0); |
| |
| gic_arch_extn.irq_set_wake = s3c_irq_wake; |
| } |
| |
| struct bus_type exynos_subsys = { |
| .name = "exynos-core", |
| .dev_name = "exynos-core", |
| }; |
| |
| static struct device exynos4_dev = { |
| .bus = &exynos_subsys, |
| }; |
| |
| static int __init exynos_core_init(void) |
| { |
| return subsys_system_register(&exynos_subsys, NULL); |
| } |
| core_initcall(exynos_core_init); |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| static int __init exynos4_l2x0_cache_init(void) |
| { |
| int ret; |
| |
| if (soc_is_exynos5250() || soc_is_exynos5440()) |
| return 0; |
| |
| ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); |
| if (!ret) { |
| l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); |
| clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); |
| return 0; |
| } |
| |
| if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) { |
| l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC; |
| /* TAG, Data Latency Control: 2 cycles */ |
| l2x0_saved_regs.tag_latency = 0x110; |
| |
| if (soc_is_exynos4212() || soc_is_exynos4412()) |
| l2x0_saved_regs.data_latency = 0x120; |
| else |
| l2x0_saved_regs.data_latency = 0x110; |
| |
| l2x0_saved_regs.prefetch_ctrl = 0x30000007; |
| l2x0_saved_regs.pwr_ctrl = |
| (L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN); |
| |
| l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); |
| |
| __raw_writel(l2x0_saved_regs.tag_latency, |
| S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); |
| __raw_writel(l2x0_saved_regs.data_latency, |
| S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); |
| |
| /* L2X0 Prefetch Control */ |
| __raw_writel(l2x0_saved_regs.prefetch_ctrl, |
| S5P_VA_L2CC + L2X0_PREFETCH_CTRL); |
| |
| /* L2X0 Power Control */ |
| __raw_writel(l2x0_saved_regs.pwr_ctrl, |
| S5P_VA_L2CC + L2X0_POWER_CTRL); |
| |
| clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); |
| clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs)); |
| } |
| |
| l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK); |
| return 0; |
| } |
| early_initcall(exynos4_l2x0_cache_init); |
| #endif |
| |
| static int __init exynos_init(void) |
| { |
| printk(KERN_INFO "EXYNOS: Initializing architecture\n"); |
| |
| return device_register(&exynos4_dev); |
| } |
| |
| /* uart registration process */ |
| |
| static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) |
| { |
| struct s3c2410_uartcfg *tcfg = cfg; |
| u32 ucnt; |
| |
| for (ucnt = 0; ucnt < no; ucnt++, tcfg++) |
| tcfg->has_fracval = 1; |
| |
| s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); |
| } |
| |
| static void __iomem *exynos_eint_base; |
| |
| static DEFINE_SPINLOCK(eint_lock); |
| |
| static unsigned int eint0_15_data[16]; |
| |
| static inline int exynos4_irq_to_gpio(unsigned int irq) |
| { |
| if (irq < IRQ_EINT(0)) |
| return -EINVAL; |
| |
| irq -= IRQ_EINT(0); |
| if (irq < 8) |
| return EXYNOS4_GPX0(irq); |
| |
| irq -= 8; |
| if (irq < 8) |
| return EXYNOS4_GPX1(irq); |
| |
| irq -= 8; |
| if (irq < 8) |
| return EXYNOS4_GPX2(irq); |
| |
| irq -= 8; |
| if (irq < 8) |
| return EXYNOS4_GPX3(irq); |
| |
| return -EINVAL; |
| } |
| |
| static inline int exynos5_irq_to_gpio(unsigned int irq) |
| { |
| if (irq < IRQ_EINT(0)) |
| return -EINVAL; |
| |
| irq -= IRQ_EINT(0); |
| if (irq < 8) |
| return EXYNOS5_GPX0(irq); |
| |
| irq -= 8; |
| if (irq < 8) |
| return EXYNOS5_GPX1(irq); |
| |
| irq -= 8; |
| if (irq < 8) |
| return EXYNOS5_GPX2(irq); |
| |
| irq -= 8; |
| if (irq < 8) |
| return EXYNOS5_GPX3(irq); |
| |
| return -EINVAL; |
| } |
| |
| static unsigned int exynos4_eint0_15_src_int[16] = { |
| EXYNOS4_IRQ_EINT0, |
| EXYNOS4_IRQ_EINT1, |
| EXYNOS4_IRQ_EINT2, |
| EXYNOS4_IRQ_EINT3, |
| EXYNOS4_IRQ_EINT4, |
| EXYNOS4_IRQ_EINT5, |
| EXYNOS4_IRQ_EINT6, |
| EXYNOS4_IRQ_EINT7, |
| EXYNOS4_IRQ_EINT8, |
| EXYNOS4_IRQ_EINT9, |
| EXYNOS4_IRQ_EINT10, |
| EXYNOS4_IRQ_EINT11, |
| EXYNOS4_IRQ_EINT12, |
| EXYNOS4_IRQ_EINT13, |
| EXYNOS4_IRQ_EINT14, |
| EXYNOS4_IRQ_EINT15, |
| }; |
| |
| static unsigned int exynos5_eint0_15_src_int[16] = { |
| EXYNOS5_IRQ_EINT0, |
| EXYNOS5_IRQ_EINT1, |
| EXYNOS5_IRQ_EINT2, |
| EXYNOS5_IRQ_EINT3, |
| EXYNOS5_IRQ_EINT4, |
| EXYNOS5_IRQ_EINT5, |
| EXYNOS5_IRQ_EINT6, |
| EXYNOS5_IRQ_EINT7, |
| EXYNOS5_IRQ_EINT8, |
| EXYNOS5_IRQ_EINT9, |
| EXYNOS5_IRQ_EINT10, |
| EXYNOS5_IRQ_EINT11, |
| EXYNOS5_IRQ_EINT12, |
| EXYNOS5_IRQ_EINT13, |
| EXYNOS5_IRQ_EINT14, |
| EXYNOS5_IRQ_EINT15, |
| }; |
| static inline void exynos_irq_eint_mask(struct irq_data *data) |
| { |
| u32 mask; |
| |
| spin_lock(&eint_lock); |
| mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); |
| mask |= EINT_OFFSET_BIT(data->irq); |
| __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); |
| spin_unlock(&eint_lock); |
| } |
| |
| static void exynos_irq_eint_unmask(struct irq_data *data) |
| { |
| u32 mask; |
| |
| spin_lock(&eint_lock); |
| mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); |
| mask &= ~(EINT_OFFSET_BIT(data->irq)); |
| __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); |
| spin_unlock(&eint_lock); |
| } |
| |
| static inline void exynos_irq_eint_ack(struct irq_data *data) |
| { |
| __raw_writel(EINT_OFFSET_BIT(data->irq), |
| EINT_PEND(exynos_eint_base, data->irq)); |
| } |
| |
| static void exynos_irq_eint_maskack(struct irq_data *data) |
| { |
| exynos_irq_eint_mask(data); |
| exynos_irq_eint_ack(data); |
| } |
| |
| static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type) |
| { |
| int offs = EINT_OFFSET(data->irq); |
| int shift; |
| u32 ctrl, mask; |
| u32 newvalue = 0; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| newvalue = S5P_IRQ_TYPE_EDGE_RISING; |
| break; |
| |
| case IRQ_TYPE_EDGE_FALLING: |
| newvalue = S5P_IRQ_TYPE_EDGE_FALLING; |
| break; |
| |
| case IRQ_TYPE_EDGE_BOTH: |
| newvalue = S5P_IRQ_TYPE_EDGE_BOTH; |
| break; |
| |
| case IRQ_TYPE_LEVEL_LOW: |
| newvalue = S5P_IRQ_TYPE_LEVEL_LOW; |
| break; |
| |
| case IRQ_TYPE_LEVEL_HIGH: |
| newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; |
| break; |
| |
| default: |
| printk(KERN_ERR "No such irq type %d", type); |
| return -EINVAL; |
| } |
| |
| shift = (offs & 0x7) * 4; |
| mask = 0x7 << shift; |
| |
| spin_lock(&eint_lock); |
| ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq)); |
| ctrl &= ~mask; |
| ctrl |= newvalue << shift; |
| __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq)); |
| spin_unlock(&eint_lock); |
| |
| if (soc_is_exynos5250()) |
| s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); |
| else |
| s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); |
| |
| return 0; |
| } |
| |
| static struct irq_chip exynos_irq_eint = { |
| .name = "exynos-eint", |
| .irq_mask = exynos_irq_eint_mask, |
| .irq_unmask = exynos_irq_eint_unmask, |
| .irq_mask_ack = exynos_irq_eint_maskack, |
| .irq_ack = exynos_irq_eint_ack, |
| .irq_set_type = exynos_irq_eint_set_type, |
| #ifdef CONFIG_PM |
| .irq_set_wake = s3c_irqext_wake, |
| #endif |
| }; |
| |
| /* |
| * exynos4_irq_demux_eint |
| * |
| * This function demuxes the IRQ from from EINTs 16 to 31. |
| * It is designed to be inlined into the specific handler |
| * s5p_irq_demux_eintX_Y. |
| * |
| * Each EINT pend/mask registers handle eight of them. |
| */ |
| static inline void exynos_irq_demux_eint(unsigned int start) |
| { |
| unsigned int irq; |
| |
| u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start)); |
| u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start)); |
| |
| status &= ~mask; |
| status &= 0xff; |
| |
| while (status) { |
| irq = fls(status) - 1; |
| generic_handle_irq(irq + start); |
| status &= ~(1 << irq); |
| } |
| } |
| |
| static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) |
| { |
| struct irq_chip *chip = irq_get_chip(irq); |
| chained_irq_enter(chip, desc); |
| exynos_irq_demux_eint(IRQ_EINT(16)); |
| exynos_irq_demux_eint(IRQ_EINT(24)); |
| chained_irq_exit(chip, desc); |
| } |
| |
| static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) |
| { |
| u32 *irq_data = irq_get_handler_data(irq); |
| struct irq_chip *chip = irq_get_chip(irq); |
| |
| chained_irq_enter(chip, desc); |
| generic_handle_irq(*irq_data); |
| chained_irq_exit(chip, desc); |
| } |
| |
| static int __init exynos_init_irq_eint(void) |
| { |
| int irq; |
| |
| #ifdef CONFIG_PINCTRL_SAMSUNG |
| /* |
| * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf |
| * functionality along with support for external gpio and wakeup |
| * interrupts. If the samsung pinctrl driver is enabled and includes |
| * the wakeup interrupt support, then the setting up external wakeup |
| * interrupts here can be skipped. This check here is temporary to |
| * allow exynos4 platforms that do not use Samsung pinctrl driver to |
| * co-exist with platforms that do. When all of the Samsung Exynos4 |
| * platforms switch over to using the pinctrl driver, the wakeup |
| * interrupt support code here can be completely removed. |
| */ |
| static const struct of_device_id exynos_pinctrl_ids[] = { |
| { .compatible = "samsung,exynos4210-pinctrl", }, |
| { .compatible = "samsung,exynos4x12-pinctrl", }, |
| }; |
| struct device_node *pctrl_np, *wkup_np; |
| const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; |
| |
| for_each_matching_node(pctrl_np, exynos_pinctrl_ids) { |
| if (of_device_is_available(pctrl_np)) { |
| wkup_np = of_find_compatible_node(pctrl_np, NULL, |
| wkup_compat); |
| if (wkup_np) |
| return -ENODEV; |
| } |
| } |
| #endif |
| if (soc_is_exynos5440()) |
| return 0; |
| |
| if (soc_is_exynos5250()) |
| exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); |
| else |
| exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K); |
| |
| if (exynos_eint_base == NULL) { |
| pr_err("unable to ioremap for EINT base address\n"); |
| return -ENOMEM; |
| } |
| |
| for (irq = 0 ; irq <= 31 ; irq++) { |
| irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint, |
| handle_level_irq); |
| set_irq_flags(IRQ_EINT(irq), IRQF_VALID); |
| } |
| |
| irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31); |
| |
| for (irq = 0 ; irq <= 15 ; irq++) { |
| eint0_15_data[irq] = IRQ_EINT(irq); |
| |
| if (soc_is_exynos5250()) { |
| irq_set_handler_data(exynos5_eint0_15_src_int[irq], |
| &eint0_15_data[irq]); |
| irq_set_chained_handler(exynos5_eint0_15_src_int[irq], |
| exynos_irq_eint0_15); |
| } else { |
| irq_set_handler_data(exynos4_eint0_15_src_int[irq], |
| &eint0_15_data[irq]); |
| irq_set_chained_handler(exynos4_eint0_15_src_int[irq], |
| exynos_irq_eint0_15); |
| } |
| } |
| |
| return 0; |
| } |
| arch_initcall(exynos_init_irq_eint); |