| /* |
| * OMAP2xxx Power/Reset Management (PRM) register definitions |
| * |
| * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. |
| * Copyright (C) 2008-2010 Nokia Corporation |
| * Paul Walmsley |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * The PRM hardware modules on the OMAP2/3 are quite similar to each |
| * other. The PRM on OMAP4 has a new register layout, and is handled |
| * in a separate file. |
| */ |
| #ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H |
| #define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H |
| |
| #include "prcm-common.h" |
| #include "prm.h" |
| #include "prm2xxx_3xxx.h" |
| |
| #define OMAP2420_PRM_REGADDR(module, reg) \ |
| OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) |
| #define OMAP2430_PRM_REGADDR(module, reg) \ |
| OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) |
| |
| /* |
| * OMAP2-specific global PRM registers |
| * Use {read,write}l_relaxed() with these registers. |
| * |
| * With a few exceptions, these are the register names beginning with |
| * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE |
| * bits.) |
| * |
| */ |
| |
| #define OMAP2_PRCM_REVISION_OFFSET 0x0000 |
| #define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) |
| #define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 |
| #define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) |
| |
| #define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 |
| #define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) |
| #define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c |
| #define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) |
| |
| #define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 |
| #define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) |
| #define OMAP2_PRCM_VOLTST_OFFSET 0x0054 |
| #define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) |
| #define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 |
| #define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) |
| #define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 |
| #define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) |
| #define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 |
| #define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) |
| #define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 |
| #define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) |
| #define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 |
| #define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) |
| #define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 |
| #define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) |
| #define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 |
| #define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) |
| #define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 |
| #define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) |
| |
| #define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) |
| #define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) |
| |
| #define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) |
| #define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) |
| |
| #define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) |
| #define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) |
| #define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) |
| #define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) |
| #define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) |
| #define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) |
| #define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) |
| #define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) |
| #define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) |
| #define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) |
| |
| /* |
| * Module specific PRM register offsets from PRM_BASE + domain offset |
| * |
| * Use prm_{read,write}_mod_reg() with these registers. |
| * |
| * With a few exceptions, these are the register names beginning with |
| * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the |
| * IRQSTATUS and IRQENABLE bits.) |
| */ |
| |
| /* Register offsets appearing on both OMAP2 and OMAP3 */ |
| |
| #define OMAP2_RM_RSTCTRL 0x0050 |
| #define OMAP2_RM_RSTTIME 0x0054 |
| #define OMAP2_RM_RSTST 0x0058 |
| #define OMAP2_PM_PWSTCTRL 0x00e0 |
| #define OMAP2_PM_PWSTST 0x00e4 |
| |
| #define PM_WKEN 0x00a0 |
| #define PM_WKEN1 PM_WKEN |
| #define PM_WKST 0x00b0 |
| #define PM_WKST1 PM_WKST |
| #define PM_WKDEP 0x00c8 |
| #define PM_EVGENCTRL 0x00d4 |
| #define PM_EVGENONTIM 0x00d8 |
| #define PM_EVGENOFFTIM 0x00dc |
| |
| /* OMAP2xxx specific register offsets */ |
| #define OMAP24XX_PM_WKEN2 0x00a4 |
| #define OMAP24XX_PM_WKST2 0x00b4 |
| |
| #define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ |
| #define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ |
| #define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 |
| #define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc |
| |
| #ifndef __ASSEMBLER__ |
| /* Function prototypes */ |
| extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); |
| extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); |
| |
| extern void omap2xxx_prm_dpll_reset(void); |
| void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask); |
| |
| extern int __init omap2xxx_prm_init(void); |
| |
| #endif |
| |
| #endif |