| /* |
| * Linux driver for TerraTec DMX 6Fire USB |
| * |
| * Device communications |
| * |
| * Author: Torsten Schenk <torsten.schenk@zoho.com> |
| * Created: Jan 01, 2011 |
| * Copyright: (C) Torsten Schenk |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include "comm.h" |
| #include "chip.h" |
| #include "midi.h" |
| |
| enum { |
| COMM_EP = 1, |
| COMM_FPGA_EP = 2 |
| }; |
| |
| static void usb6fire_comm_init_urb(struct comm_runtime *rt, struct urb *urb, |
| u8 *buffer, void *context, void(*handler)(struct urb *urb)) |
| { |
| usb_init_urb(urb); |
| urb->transfer_buffer = buffer; |
| urb->pipe = usb_sndintpipe(rt->chip->dev, COMM_EP); |
| urb->complete = handler; |
| urb->context = context; |
| urb->interval = 1; |
| urb->dev = rt->chip->dev; |
| } |
| |
| static void usb6fire_comm_receiver_handler(struct urb *urb) |
| { |
| struct comm_runtime *rt = urb->context; |
| struct midi_runtime *midi_rt = rt->chip->midi; |
| |
| if (!urb->status) { |
| if (rt->receiver_buffer[0] == 0x10) /* midi in event */ |
| if (midi_rt) |
| midi_rt->in_received(midi_rt, |
| rt->receiver_buffer + 2, |
| rt->receiver_buffer[1]); |
| } |
| |
| if (!rt->chip->shutdown) { |
| urb->status = 0; |
| urb->actual_length = 0; |
| if (usb_submit_urb(urb, GFP_ATOMIC) < 0) |
| snd_printk(KERN_WARNING PREFIX |
| "comm data receiver aborted.\n"); |
| } |
| } |
| |
| static void usb6fire_comm_init_buffer(u8 *buffer, u8 id, u8 request, |
| u8 reg, u8 vl, u8 vh) |
| { |
| buffer[0] = 0x01; |
| buffer[2] = request; |
| buffer[3] = id; |
| switch (request) { |
| case 0x02: |
| buffer[1] = 0x05; /* length (starting at buffer[2]) */ |
| buffer[4] = reg; |
| buffer[5] = vl; |
| buffer[6] = vh; |
| break; |
| |
| case 0x12: |
| buffer[1] = 0x0b; /* length (starting at buffer[2]) */ |
| buffer[4] = 0x00; |
| buffer[5] = 0x18; |
| buffer[6] = 0x05; |
| buffer[7] = 0x00; |
| buffer[8] = 0x01; |
| buffer[9] = 0x00; |
| buffer[10] = 0x9e; |
| buffer[11] = reg; |
| buffer[12] = vl; |
| break; |
| |
| case 0x20: |
| case 0x21: |
| case 0x22: |
| buffer[1] = 0x04; |
| buffer[4] = reg; |
| buffer[5] = vl; |
| break; |
| } |
| } |
| |
| static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev) |
| { |
| int ret; |
| int actual_len; |
| |
| ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP), |
| buffer, buffer[1] + 2, &actual_len, HZ); |
| if (ret < 0) |
| return ret; |
| else if (actual_len != buffer[1] + 2) |
| return -EIO; |
| return 0; |
| } |
| |
| static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request, |
| u8 reg, u8 value) |
| { |
| u8 buffer[13]; /* 13: maximum length of message */ |
| |
| usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00); |
| return usb6fire_comm_send_buffer(buffer, rt->chip->dev); |
| } |
| |
| static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request, |
| u8 reg, u8 vl, u8 vh) |
| { |
| u8 buffer[13]; /* 13: maximum length of message */ |
| |
| usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh); |
| return usb6fire_comm_send_buffer(buffer, rt->chip->dev); |
| } |
| |
| int usb6fire_comm_init(struct sfire_chip *chip) |
| { |
| struct comm_runtime *rt = kzalloc(sizeof(struct comm_runtime), |
| GFP_KERNEL); |
| struct urb *urb; |
| int ret; |
| |
| if (!rt) |
| return -ENOMEM; |
| |
| urb = &rt->receiver; |
| rt->serial = 1; |
| rt->chip = chip; |
| usb_init_urb(urb); |
| rt->init_urb = usb6fire_comm_init_urb; |
| rt->write8 = usb6fire_comm_write8; |
| rt->write16 = usb6fire_comm_write16; |
| |
| /* submit an urb that receives communication data from device */ |
| urb->transfer_buffer = rt->receiver_buffer; |
| urb->transfer_buffer_length = COMM_RECEIVER_BUFSIZE; |
| urb->pipe = usb_rcvintpipe(chip->dev, COMM_EP); |
| urb->dev = chip->dev; |
| urb->complete = usb6fire_comm_receiver_handler; |
| urb->context = rt; |
| urb->interval = 1; |
| ret = usb_submit_urb(urb, GFP_KERNEL); |
| if (ret < 0) { |
| kfree(rt); |
| snd_printk(KERN_ERR PREFIX "cannot create comm data receiver."); |
| return ret; |
| } |
| chip->comm = rt; |
| return 0; |
| } |
| |
| void usb6fire_comm_abort(struct sfire_chip *chip) |
| { |
| struct comm_runtime *rt = chip->comm; |
| |
| if (rt) |
| usb_poison_urb(&rt->receiver); |
| } |
| |
| void usb6fire_comm_destroy(struct sfire_chip *chip) |
| { |
| kfree(chip->comm); |
| chip->comm = NULL; |
| } |