| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.txt. |
| # |
| |
| mainmenu "Linux Kernel Configuration" |
| |
| config AVR32 |
| def_bool y |
| # With EMBEDDED=n, we get lots of stuff automatically selected |
| # that we usually don't need on AVR32. |
| select EMBEDDED |
| select HAVE_CLK |
| select HAVE_OPROFILE |
| select HAVE_KPROBES |
| help |
| AVR32 is a high-performance 32-bit RISC microprocessor core, |
| designed for cost-sensitive embedded applications, with particular |
| emphasis on low power consumption and high code density. |
| |
| There is an AVR32 Linux project with a web page at |
| http://avr32linux.org/. |
| |
| config GENERIC_GPIO |
| def_bool y |
| |
| config GENERIC_HARDIRQS |
| def_bool y |
| |
| config STACKTRACE_SUPPORT |
| def_bool y |
| |
| config LOCKDEP_SUPPORT |
| def_bool y |
| |
| config TRACE_IRQFLAGS_SUPPORT |
| def_bool y |
| |
| config HARDIRQS_SW_RESEND |
| def_bool y |
| |
| config GENERIC_IRQ_PROBE |
| def_bool y |
| |
| config RWSEM_GENERIC_SPINLOCK |
| def_bool y |
| |
| config GENERIC_TIME |
| def_bool y |
| |
| config GENERIC_CLOCKEVENTS |
| def_bool y |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| def_bool n |
| |
| config ARCH_HAS_ILOG2_U32 |
| def_bool n |
| |
| config ARCH_HAS_ILOG2_U64 |
| def_bool n |
| |
| config GENERIC_HWEIGHT |
| def_bool y |
| |
| config GENERIC_CALIBRATE_DELAY |
| def_bool y |
| |
| config GENERIC_BUG |
| def_bool y |
| depends on BUG |
| |
| source "init/Kconfig" |
| |
| source "kernel/Kconfig.freezer" |
| |
| menu "System Type and features" |
| |
| source "kernel/time/Kconfig" |
| |
| config SUBARCH_AVR32B |
| bool |
| config MMU |
| bool |
| config PERFORMANCE_COUNTERS |
| bool |
| |
| config PLATFORM_AT32AP |
| bool |
| select SUBARCH_AVR32B |
| select MMU |
| select PERFORMANCE_COUNTERS |
| select ARCH_REQUIRE_GPIOLIB |
| select GENERIC_ALLOCATOR |
| select HAVE_FB_ATMEL |
| |
| # |
| # CPU types |
| # |
| |
| # AP7000 derivatives |
| config CPU_AT32AP700X |
| bool |
| select PLATFORM_AT32AP |
| config CPU_AT32AP7000 |
| bool |
| select CPU_AT32AP700X |
| config CPU_AT32AP7001 |
| bool |
| select CPU_AT32AP700X |
| config CPU_AT32AP7002 |
| bool |
| select CPU_AT32AP700X |
| |
| # AP700X boards |
| config BOARD_ATNGW100_COMMON |
| bool |
| select CPU_AT32AP7000 |
| |
| choice |
| prompt "AVR32 board type" |
| default BOARD_ATSTK1000 |
| |
| config BOARD_ATSTK1000 |
| bool "ATSTK1000 evaluation board" |
| |
| config BOARD_ATNGW100_MKI |
| bool "ATNGW100 Network Gateway" |
| select BOARD_ATNGW100_COMMON |
| |
| config BOARD_ATNGW100_MKII |
| bool "ATNGW100 mkII Network Gateway" |
| select BOARD_ATNGW100_COMMON |
| |
| config BOARD_HAMMERHEAD |
| bool "Hammerhead board" |
| select CPU_AT32AP7000 |
| select USB_ARCH_HAS_HCD |
| help |
| The Hammerhead platform is built around an AVR32 32-bit microcontroller from Atmel. |
| It offers versatile peripherals, such as ethernet, usb device, usb host etc. |
| |
| The board also incorporates a power supply and is a Power over Ethernet (PoE) Powered |
| Device (PD). |
| |
| Additionally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is |
| mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which |
| will cover even the most exceptional need of memory bandwidth. Together with the onboard |
| video decoder the board is ready for video processing. |
| |
| For more information see: http://www.miromico.com/hammerhead |
| |
| config BOARD_FAVR_32 |
| bool "Favr-32 LCD-board" |
| select CPU_AT32AP7000 |
| |
| config BOARD_MERISC |
| bool "Merisc board" |
| select CPU_AT32AP7000 |
| help |
| Merisc is the family name for a range of AVR32-based boards. |
| |
| The boards are designed to be used in a man-machine |
| interfacing environment, utilizing a touch-based graphical |
| user interface. They host a vast range of I/O peripherals as |
| well as a large SDRAM & Flash memory bank. |
| |
| For more information see: http://www.martinsson.se/merisc |
| |
| config BOARD_MIMC200 |
| bool "MIMC200 CPU board" |
| select CPU_AT32AP7000 |
| endchoice |
| |
| source "arch/avr32/boards/atstk1000/Kconfig" |
| source "arch/avr32/boards/atngw100/Kconfig" |
| source "arch/avr32/boards/hammerhead/Kconfig" |
| source "arch/avr32/boards/favr-32/Kconfig" |
| source "arch/avr32/boards/merisc/Kconfig" |
| |
| choice |
| prompt "Boot loader type" |
| default LOADER_U_BOOT |
| |
| config LOADER_U_BOOT |
| bool "U-Boot (or similar) bootloader" |
| endchoice |
| |
| source "arch/avr32/mach-at32ap/Kconfig" |
| |
| config LOAD_ADDRESS |
| hex |
| default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y |
| |
| config ENTRY_ADDRESS |
| hex |
| default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y |
| |
| config PHYS_OFFSET |
| hex |
| default 0x10000000 if CPU_AT32AP700X=y |
| |
| source "kernel/Kconfig.preempt" |
| |
| config QUICKLIST |
| def_bool y |
| |
| config HAVE_ARCH_BOOTMEM |
| def_bool n |
| |
| config ARCH_HAVE_MEMORY_PRESENT |
| def_bool n |
| |
| config NEED_NODE_MEMMAP_SIZE |
| def_bool n |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| |
| config ARCH_DISCONTIGMEM_ENABLE |
| def_bool n |
| |
| config ARCH_SPARSEMEM_ENABLE |
| def_bool n |
| |
| source "mm/Kconfig" |
| |
| config OWNERSHIP_TRACE |
| bool "Ownership trace support" |
| default y |
| help |
| Say Y to generate an Ownership Trace message on every context switch, |
| enabling Nexus-compliant debuggers to keep track of the PID of the |
| currently executing task. |
| |
| config NMI_DEBUGGING |
| bool "NMI Debugging" |
| default n |
| help |
| Say Y here and pass the nmi_debug command-line parameter to |
| the kernel to turn on NMI debugging. Depending on the value |
| of the nmi_debug option, various pieces of information will |
| be dumped to the console when a Non-Maskable Interrupt |
| happens. |
| |
| # FPU emulation goes here |
| |
| source "kernel/Kconfig.hz" |
| |
| config CMDLINE |
| string "Default kernel command line" |
| default "" |
| help |
| If you don't have a boot loader capable of passing a command line string |
| to the kernel, you may specify one here. As a minimum, you should specify |
| the memory size and the root device (e.g., mem=8M, root=/dev/nfs). |
| |
| endmenu |
| |
| menu "Power management options" |
| |
| source "kernel/power/Kconfig" |
| |
| config ARCH_SUSPEND_POSSIBLE |
| def_bool y |
| |
| menu "CPU Frequency scaling" |
| |
| source "drivers/cpufreq/Kconfig" |
| |
| config CPU_FREQ_AT32AP |
| bool "CPU frequency driver for AT32AP" |
| depends on CPU_FREQ && PLATFORM_AT32AP |
| default n |
| help |
| This enables the CPU frequency driver for AT32AP processors. |
| |
| For details, take a look in <file:Documentation/cpu-freq>. |
| |
| If in doubt, say N. |
| |
| endmenu |
| |
| endmenu |
| |
| menu "Bus options" |
| |
| config PCI |
| bool |
| |
| source "drivers/pci/Kconfig" |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| endmenu |
| |
| menu "Executable file formats" |
| source "fs/Kconfig.binfmt" |
| endmenu |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "arch/avr32/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |
| |
| source "lib/Kconfig" |