| /* |
| * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX). |
| * See http://www.hilscher.com for details. |
| * |
| * (C) 2007 Hans J. Koch <hjk@hansjkoch.de> |
| * (C) 2008 Manuel Traut <manut@linutronix.de> |
| * |
| * Licensed under GPL version 2 only. |
| * |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/uio_driver.h> |
| |
| #define PCI_VENDOR_ID_HILSCHER 0x15CF |
| #define PCI_DEVICE_ID_HILSCHER_NETX 0x0000 |
| #define PCI_DEVICE_ID_HILSCHER_NETPLC 0x0010 |
| #define PCI_SUBDEVICE_ID_NETPLC_RAM 0x0000 |
| #define PCI_SUBDEVICE_ID_NETPLC_FLASH 0x0001 |
| #define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235 |
| #define PCI_SUBDEVICE_ID_NXPCA 0x3335 |
| |
| #define DPM_HOST_INT_EN0 0xfff0 |
| #define DPM_HOST_INT_STAT0 0xffe0 |
| |
| #define DPM_HOST_INT_MASK 0xe600ffff |
| #define DPM_HOST_INT_GLOBAL_EN 0x80000000 |
| |
| static irqreturn_t netx_handler(int irq, struct uio_info *dev_info) |
| { |
| void __iomem *int_enable_reg = dev_info->mem[0].internal_addr |
| + DPM_HOST_INT_EN0; |
| void __iomem *int_status_reg = dev_info->mem[0].internal_addr |
| + DPM_HOST_INT_STAT0; |
| |
| /* Is one of our interrupts enabled and active ? */ |
| if (!(ioread32(int_enable_reg) & ioread32(int_status_reg) |
| & DPM_HOST_INT_MASK)) |
| return IRQ_NONE; |
| |
| /* Disable interrupt */ |
| iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN, |
| int_enable_reg); |
| return IRQ_HANDLED; |
| } |
| |
| static int netx_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| struct uio_info *info; |
| int bar; |
| |
| info = kzalloc(sizeof(struct uio_info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| if (pci_enable_device(dev)) |
| goto out_free; |
| |
| if (pci_request_regions(dev, "netx")) |
| goto out_disable; |
| |
| switch (id->device) { |
| case PCI_DEVICE_ID_HILSCHER_NETX: |
| bar = 0; |
| info->name = "netx"; |
| break; |
| case PCI_DEVICE_ID_HILSCHER_NETPLC: |
| bar = 0; |
| info->name = "netplc"; |
| break; |
| default: |
| bar = 2; |
| info->name = "netx_plx"; |
| } |
| |
| /* BAR0 or 2 points to the card's dual port memory */ |
| info->mem[0].addr = pci_resource_start(dev, bar); |
| if (!info->mem[0].addr) |
| goto out_release; |
| info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar), |
| pci_resource_len(dev, bar)); |
| |
| if (!info->mem[0].internal_addr) |
| goto out_release; |
| |
| info->mem[0].size = pci_resource_len(dev, bar); |
| info->mem[0].memtype = UIO_MEM_PHYS; |
| info->irq = dev->irq; |
| info->irq_flags = IRQF_SHARED; |
| info->handler = netx_handler; |
| info->version = "0.0.1"; |
| |
| /* Make sure all interrupts are disabled */ |
| iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0); |
| |
| if (uio_register_device(&dev->dev, info)) |
| goto out_unmap; |
| |
| pci_set_drvdata(dev, info); |
| dev_info(&dev->dev, "Found %s card, registered UIO device.\n", |
| info->name); |
| |
| return 0; |
| |
| out_unmap: |
| iounmap(info->mem[0].internal_addr); |
| out_release: |
| pci_release_regions(dev); |
| out_disable: |
| pci_disable_device(dev); |
| out_free: |
| kfree(info); |
| return -ENODEV; |
| } |
| |
| static void netx_pci_remove(struct pci_dev *dev) |
| { |
| struct uio_info *info = pci_get_drvdata(dev); |
| |
| /* Disable all interrupts */ |
| iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0); |
| uio_unregister_device(info); |
| pci_release_regions(dev); |
| pci_disable_device(dev); |
| pci_set_drvdata(dev, NULL); |
| iounmap(info->mem[0].internal_addr); |
| |
| kfree(info); |
| } |
| |
| static struct pci_device_id netx_pci_ids[] = { |
| { |
| .vendor = PCI_VENDOR_ID_HILSCHER, |
| .device = PCI_DEVICE_ID_HILSCHER_NETX, |
| .subvendor = 0, |
| .subdevice = 0, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_HILSCHER, |
| .device = PCI_DEVICE_ID_HILSCHER_NETPLC, |
| .subvendor = PCI_VENDOR_ID_HILSCHER, |
| .subdevice = PCI_SUBDEVICE_ID_NETPLC_RAM, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_HILSCHER, |
| .device = PCI_DEVICE_ID_HILSCHER_NETPLC, |
| .subvendor = PCI_VENDOR_ID_HILSCHER, |
| .subdevice = PCI_SUBDEVICE_ID_NETPLC_FLASH, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_9030, |
| .subvendor = PCI_VENDOR_ID_PLX, |
| .subdevice = PCI_SUBDEVICE_ID_NXSB_PCA, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_9030, |
| .subvendor = PCI_VENDOR_ID_PLX, |
| .subdevice = PCI_SUBDEVICE_ID_NXPCA, |
| }, |
| { 0, } |
| }; |
| |
| static struct pci_driver netx_pci_driver = { |
| .name = "netx", |
| .id_table = netx_pci_ids, |
| .probe = netx_pci_probe, |
| .remove = netx_pci_remove, |
| }; |
| |
| module_pci_driver(netx_pci_driver); |
| MODULE_DEVICE_TABLE(pci, netx_pci_ids); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Hans J. Koch, Manuel Traut"); |