| /* |
| USB Driver layer for GSM modems |
| |
| Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de> |
| |
| This driver is free software; you can redistribute it and/or modify |
| it under the terms of Version 2 of the GNU General Public License as |
| published by the Free Software Foundation. |
| |
| Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> |
| |
| History: see the git log. |
| |
| Work sponsored by: Sigos GmbH, Germany <info@sigos.de> |
| |
| This driver exists because the "normal" serial driver doesn't work too well |
| with GSM modems. Issues: |
| - data loss -- one single Receive URB is not nearly enough |
| - controlling the baud rate doesn't make sense |
| */ |
| |
| #define DRIVER_VERSION "v0.7.2" |
| #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" |
| #define DRIVER_DESC "USB Driver for GSM modems" |
| |
| #include <linux/kernel.h> |
| #include <linux/jiffies.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <linux/tty_flip.h> |
| #include <linux/module.h> |
| #include <linux/bitops.h> |
| #include <linux/uaccess.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| #include <linux/serial.h> |
| #include "usb-wwan.h" |
| |
| void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) |
| { |
| struct usb_serial *serial = port->serial; |
| struct usb_wwan_port_private *portdata; |
| struct usb_wwan_intf_private *intfdata; |
| |
| intfdata = port->serial->private; |
| |
| if (!intfdata->send_setup) |
| return; |
| |
| portdata = usb_get_serial_port_data(port); |
| mutex_lock(&serial->disc_mutex); |
| portdata->rts_state = on; |
| portdata->dtr_state = on; |
| if (serial->dev) |
| intfdata->send_setup(port); |
| mutex_unlock(&serial->disc_mutex); |
| } |
| EXPORT_SYMBOL(usb_wwan_dtr_rts); |
| |
| void usb_wwan_set_termios(struct tty_struct *tty, |
| struct usb_serial_port *port, |
| struct ktermios *old_termios) |
| { |
| struct usb_wwan_intf_private *intfdata = port->serial->private; |
| |
| /* Doesn't support option setting */ |
| tty_termios_copy_hw(&tty->termios, old_termios); |
| |
| if (intfdata->send_setup) |
| intfdata->send_setup(port); |
| } |
| EXPORT_SYMBOL(usb_wwan_set_termios); |
| |
| int usb_wwan_tiocmget(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| unsigned int value; |
| struct usb_wwan_port_private *portdata; |
| |
| portdata = usb_get_serial_port_data(port); |
| |
| value = ((portdata->rts_state) ? TIOCM_RTS : 0) | |
| ((portdata->dtr_state) ? TIOCM_DTR : 0) | |
| ((portdata->cts_state) ? TIOCM_CTS : 0) | |
| ((portdata->dsr_state) ? TIOCM_DSR : 0) | |
| ((portdata->dcd_state) ? TIOCM_CAR : 0) | |
| ((portdata->ri_state) ? TIOCM_RNG : 0); |
| |
| return value; |
| } |
| EXPORT_SYMBOL(usb_wwan_tiocmget); |
| |
| int usb_wwan_tiocmset(struct tty_struct *tty, |
| unsigned int set, unsigned int clear) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct usb_wwan_port_private *portdata; |
| struct usb_wwan_intf_private *intfdata; |
| |
| portdata = usb_get_serial_port_data(port); |
| intfdata = port->serial->private; |
| |
| if (!intfdata->send_setup) |
| return -EINVAL; |
| |
| /* FIXME: what locks portdata fields ? */ |
| if (set & TIOCM_RTS) |
| portdata->rts_state = 1; |
| if (set & TIOCM_DTR) |
| portdata->dtr_state = 1; |
| |
| if (clear & TIOCM_RTS) |
| portdata->rts_state = 0; |
| if (clear & TIOCM_DTR) |
| portdata->dtr_state = 0; |
| return intfdata->send_setup(port); |
| } |
| EXPORT_SYMBOL(usb_wwan_tiocmset); |
| |
| static int get_serial_info(struct usb_serial_port *port, |
| struct serial_struct __user *retinfo) |
| { |
| struct serial_struct tmp; |
| |
| if (!retinfo) |
| return -EFAULT; |
| |
| memset(&tmp, 0, sizeof(tmp)); |
| tmp.line = port->serial->minor; |
| tmp.port = port->number; |
| tmp.baud_base = tty_get_baud_rate(port->port.tty); |
| tmp.close_delay = port->port.close_delay / 10; |
| tmp.closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? |
| ASYNC_CLOSING_WAIT_NONE : |
| port->port.closing_wait / 10; |
| |
| if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int set_serial_info(struct usb_serial_port *port, |
| struct serial_struct __user *newinfo) |
| { |
| struct serial_struct new_serial; |
| unsigned int closing_wait, close_delay; |
| int retval = 0; |
| |
| if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) |
| return -EFAULT; |
| |
| close_delay = new_serial.close_delay * 10; |
| closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? |
| ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; |
| |
| mutex_lock(&port->port.mutex); |
| |
| if (!capable(CAP_SYS_ADMIN)) { |
| if ((close_delay != port->port.close_delay) || |
| (closing_wait != port->port.closing_wait)) |
| retval = -EPERM; |
| else |
| retval = -EOPNOTSUPP; |
| } else { |
| port->port.close_delay = close_delay; |
| port->port.closing_wait = closing_wait; |
| } |
| |
| mutex_unlock(&port->port.mutex); |
| return retval; |
| } |
| |
| int usb_wwan_ioctl(struct tty_struct *tty, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| |
| dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); |
| |
| switch (cmd) { |
| case TIOCGSERIAL: |
| return get_serial_info(port, |
| (struct serial_struct __user *) arg); |
| case TIOCSSERIAL: |
| return set_serial_info(port, |
| (struct serial_struct __user *) arg); |
| default: |
| break; |
| } |
| |
| dev_dbg(&port->dev, "%s arg not supported\n", __func__); |
| |
| return -ENOIOCTLCMD; |
| } |
| EXPORT_SYMBOL(usb_wwan_ioctl); |
| |
| /* Write */ |
| int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, |
| const unsigned char *buf, int count) |
| { |
| struct usb_wwan_port_private *portdata; |
| struct usb_wwan_intf_private *intfdata; |
| int i; |
| int left, todo; |
| struct urb *this_urb = NULL; /* spurious */ |
| int err; |
| unsigned long flags; |
| |
| portdata = usb_get_serial_port_data(port); |
| intfdata = port->serial->private; |
| |
| dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); |
| |
| i = 0; |
| left = count; |
| for (i = 0; left > 0 && i < N_OUT_URB; i++) { |
| todo = left; |
| if (todo > OUT_BUFLEN) |
| todo = OUT_BUFLEN; |
| |
| this_urb = portdata->out_urbs[i]; |
| if (test_and_set_bit(i, &portdata->out_busy)) { |
| if (time_before(jiffies, |
| portdata->tx_start_time[i] + 10 * HZ)) |
| continue; |
| usb_unlink_urb(this_urb); |
| continue; |
| } |
| dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__, |
| usb_pipeendpoint(this_urb->pipe), i); |
| |
| err = usb_autopm_get_interface_async(port->serial->interface); |
| if (err < 0) |
| break; |
| |
| /* send the data */ |
| memcpy(this_urb->transfer_buffer, buf, todo); |
| this_urb->transfer_buffer_length = todo; |
| |
| spin_lock_irqsave(&intfdata->susp_lock, flags); |
| if (intfdata->suspended) { |
| usb_anchor_urb(this_urb, &portdata->delayed); |
| spin_unlock_irqrestore(&intfdata->susp_lock, flags); |
| } else { |
| intfdata->in_flight++; |
| spin_unlock_irqrestore(&intfdata->susp_lock, flags); |
| err = usb_submit_urb(this_urb, GFP_ATOMIC); |
| if (err) { |
| dev_dbg(&port->dev, |
| "usb_submit_urb %p (write bulk) failed (%d)\n", |
| this_urb, err); |
| clear_bit(i, &portdata->out_busy); |
| spin_lock_irqsave(&intfdata->susp_lock, flags); |
| intfdata->in_flight--; |
| spin_unlock_irqrestore(&intfdata->susp_lock, |
| flags); |
| usb_autopm_put_interface_async(port->serial->interface); |
| break; |
| } |
| } |
| |
| portdata->tx_start_time[i] = jiffies; |
| buf += todo; |
| left -= todo; |
| } |
| |
| count -= left; |
| dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count); |
| return count; |
| } |
| EXPORT_SYMBOL(usb_wwan_write); |
| |
| static void usb_wwan_indat_callback(struct urb *urb) |
| { |
| int err; |
| int endpoint; |
| struct usb_serial_port *port; |
| struct tty_struct *tty; |
| struct device *dev; |
| unsigned char *data = urb->transfer_buffer; |
| int status = urb->status; |
| |
| endpoint = usb_pipeendpoint(urb->pipe); |
| port = urb->context; |
| dev = &port->dev; |
| |
| if (status) { |
| dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", |
| __func__, status, endpoint); |
| } else { |
| tty = tty_port_tty_get(&port->port); |
| if (tty) { |
| if (urb->actual_length) { |
| tty_insert_flip_string(tty, data, |
| urb->actual_length); |
| tty_flip_buffer_push(tty); |
| } else |
| dev_dbg(dev, "%s: empty read urb received\n", __func__); |
| tty_kref_put(tty); |
| } |
| |
| /* Resubmit urb so we continue receiving */ |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err) { |
| if (err != -EPERM) { |
| dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err); |
| /* busy also in error unless we are killed */ |
| usb_mark_last_busy(port->serial->dev); |
| } |
| } else { |
| usb_mark_last_busy(port->serial->dev); |
| } |
| } |
| } |
| |
| static void usb_wwan_outdat_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port; |
| struct usb_wwan_port_private *portdata; |
| struct usb_wwan_intf_private *intfdata; |
| int i; |
| |
| port = urb->context; |
| intfdata = port->serial->private; |
| |
| usb_serial_port_softint(port); |
| usb_autopm_put_interface_async(port->serial->interface); |
| portdata = usb_get_serial_port_data(port); |
| spin_lock(&intfdata->susp_lock); |
| intfdata->in_flight--; |
| spin_unlock(&intfdata->susp_lock); |
| |
| for (i = 0; i < N_OUT_URB; ++i) { |
| if (portdata->out_urbs[i] == urb) { |
| smp_mb__before_clear_bit(); |
| clear_bit(i, &portdata->out_busy); |
| break; |
| } |
| } |
| } |
| |
| int usb_wwan_write_room(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct usb_wwan_port_private *portdata; |
| int i; |
| int data_len = 0; |
| struct urb *this_urb; |
| |
| portdata = usb_get_serial_port_data(port); |
| |
| for (i = 0; i < N_OUT_URB; i++) { |
| this_urb = portdata->out_urbs[i]; |
| if (this_urb && !test_bit(i, &portdata->out_busy)) |
| data_len += OUT_BUFLEN; |
| } |
| |
| dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); |
| return data_len; |
| } |
| EXPORT_SYMBOL(usb_wwan_write_room); |
| |
| int usb_wwan_chars_in_buffer(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct usb_wwan_port_private *portdata; |
| int i; |
| int data_len = 0; |
| struct urb *this_urb; |
| |
| portdata = usb_get_serial_port_data(port); |
| |
| for (i = 0; i < N_OUT_URB; i++) { |
| this_urb = portdata->out_urbs[i]; |
| /* FIXME: This locking is insufficient as this_urb may |
| go unused during the test */ |
| if (this_urb && test_bit(i, &portdata->out_busy)) |
| data_len += this_urb->transfer_buffer_length; |
| } |
| dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); |
| return data_len; |
| } |
| EXPORT_SYMBOL(usb_wwan_chars_in_buffer); |
| |
| int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) |
| { |
| struct usb_wwan_port_private *portdata; |
| struct usb_wwan_intf_private *intfdata; |
| struct usb_serial *serial = port->serial; |
| int i, err; |
| struct urb *urb; |
| |
| portdata = usb_get_serial_port_data(port); |
| intfdata = serial->private; |
| |
| /* Start reading from the IN endpoint */ |
| for (i = 0; i < N_IN_URB; i++) { |
| urb = portdata->in_urbs[i]; |
| if (!urb) |
| continue; |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err) { |
| dev_dbg(&port->dev, "%s: submit urb %d failed (%d) %d\n", |
| __func__, i, err, urb->transfer_buffer_length); |
| } |
| } |
| |
| if (intfdata->send_setup) |
| intfdata->send_setup(port); |
| |
| serial->interface->needs_remote_wakeup = 1; |
| spin_lock_irq(&intfdata->susp_lock); |
| portdata->opened = 1; |
| spin_unlock_irq(&intfdata->susp_lock); |
| /* this balances a get in the generic USB serial code */ |
| usb_autopm_put_interface(serial->interface); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(usb_wwan_open); |
| |
| void usb_wwan_close(struct usb_serial_port *port) |
| { |
| int i; |
| struct usb_serial *serial = port->serial; |
| struct usb_wwan_port_private *portdata; |
| struct usb_wwan_intf_private *intfdata = port->serial->private; |
| |
| portdata = usb_get_serial_port_data(port); |
| |
| if (serial->dev) { |
| /* Stop reading/writing urbs */ |
| spin_lock_irq(&intfdata->susp_lock); |
| portdata->opened = 0; |
| spin_unlock_irq(&intfdata->susp_lock); |
| |
| for (i = 0; i < N_IN_URB; i++) |
| usb_kill_urb(portdata->in_urbs[i]); |
| for (i = 0; i < N_OUT_URB; i++) |
| usb_kill_urb(portdata->out_urbs[i]); |
| /* balancing - important as an error cannot be handled*/ |
| usb_autopm_get_interface_no_resume(serial->interface); |
| serial->interface->needs_remote_wakeup = 0; |
| } |
| } |
| EXPORT_SYMBOL(usb_wwan_close); |
| |
| /* Helper functions used by usb_wwan_setup_urbs */ |
| static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, |
| int endpoint, |
| int dir, void *ctx, char *buf, int len, |
| void (*callback) (struct urb *)) |
| { |
| struct usb_serial *serial = port->serial; |
| struct urb *urb; |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ |
| if (urb == NULL) { |
| dev_dbg(&serial->interface->dev, |
| "%s: alloc for endpoint %d failed.\n", __func__, |
| endpoint); |
| return NULL; |
| } |
| |
| /* Fill URB using supplied data. */ |
| usb_fill_bulk_urb(urb, serial->dev, |
| usb_sndbulkpipe(serial->dev, endpoint) | dir, |
| buf, len, callback, ctx); |
| |
| return urb; |
| } |
| |
| int usb_wwan_port_probe(struct usb_serial_port *port) |
| { |
| struct usb_wwan_port_private *portdata; |
| struct urb *urb; |
| u8 *buffer; |
| int err; |
| int i; |
| |
| portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); |
| if (!portdata) |
| return -ENOMEM; |
| |
| init_usb_anchor(&portdata->delayed); |
| |
| for (i = 0; i < N_IN_URB; i++) { |
| if (!port->bulk_in_size) |
| break; |
| |
| buffer = (u8 *)__get_free_page(GFP_KERNEL); |
| if (!buffer) |
| goto bail_out_error; |
| portdata->in_buffer[i] = buffer; |
| |
| urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, |
| USB_DIR_IN, port, |
| buffer, IN_BUFLEN, |
| usb_wwan_indat_callback); |
| portdata->in_urbs[i] = urb; |
| } |
| |
| for (i = 0; i < N_OUT_URB; i++) { |
| if (!port->bulk_out_size) |
| break; |
| |
| buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); |
| if (!buffer) |
| goto bail_out_error2; |
| portdata->out_buffer[i] = buffer; |
| |
| urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, |
| USB_DIR_OUT, port, |
| buffer, OUT_BUFLEN, |
| usb_wwan_outdat_callback); |
| portdata->out_urbs[i] = urb; |
| } |
| |
| usb_set_serial_port_data(port, portdata); |
| |
| if (port->interrupt_in_urb) { |
| err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); |
| if (err) |
| dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", |
| __func__, err); |
| } |
| |
| return 0; |
| |
| bail_out_error2: |
| for (i = 0; i < N_OUT_URB; i++) { |
| usb_free_urb(portdata->out_urbs[i]); |
| kfree(portdata->out_buffer[i]); |
| } |
| bail_out_error: |
| for (i = 0; i < N_IN_URB; i++) { |
| usb_free_urb(portdata->in_urbs[i]); |
| free_page((unsigned long)portdata->in_buffer[i]); |
| } |
| kfree(portdata); |
| |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL_GPL(usb_wwan_port_probe); |
| |
| int usb_wwan_port_remove(struct usb_serial_port *port) |
| { |
| int i; |
| struct usb_wwan_port_private *portdata; |
| |
| portdata = usb_get_serial_port_data(port); |
| usb_set_serial_port_data(port, NULL); |
| |
| /* Stop reading/writing urbs and free them */ |
| for (i = 0; i < N_IN_URB; i++) { |
| usb_kill_urb(portdata->in_urbs[i]); |
| usb_free_urb(portdata->in_urbs[i]); |
| free_page((unsigned long)portdata->in_buffer[i]); |
| } |
| for (i = 0; i < N_OUT_URB; i++) { |
| usb_kill_urb(portdata->out_urbs[i]); |
| usb_free_urb(portdata->out_urbs[i]); |
| kfree(portdata->out_buffer[i]); |
| } |
| |
| /* Now free port private data */ |
| kfree(portdata); |
| return 0; |
| } |
| EXPORT_SYMBOL(usb_wwan_port_remove); |
| |
| #ifdef CONFIG_PM |
| static void stop_read_write_urbs(struct usb_serial *serial) |
| { |
| int i, j; |
| struct usb_serial_port *port; |
| struct usb_wwan_port_private *portdata; |
| |
| /* Stop reading/writing urbs */ |
| for (i = 0; i < serial->num_ports; ++i) { |
| port = serial->port[i]; |
| portdata = usb_get_serial_port_data(port); |
| if (!portdata) |
| continue; |
| for (j = 0; j < N_IN_URB; j++) |
| usb_kill_urb(portdata->in_urbs[j]); |
| for (j = 0; j < N_OUT_URB; j++) |
| usb_kill_urb(portdata->out_urbs[j]); |
| } |
| } |
| |
| int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) |
| { |
| struct usb_wwan_intf_private *intfdata = serial->private; |
| int b; |
| |
| if (PMSG_IS_AUTO(message)) { |
| spin_lock_irq(&intfdata->susp_lock); |
| b = intfdata->in_flight; |
| spin_unlock_irq(&intfdata->susp_lock); |
| |
| if (b) |
| return -EBUSY; |
| } |
| |
| spin_lock_irq(&intfdata->susp_lock); |
| intfdata->suspended = 1; |
| spin_unlock_irq(&intfdata->susp_lock); |
| stop_read_write_urbs(serial); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(usb_wwan_suspend); |
| |
| static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata) |
| { |
| int i; |
| |
| for (i = 0; i < N_OUT_URB; i++) { |
| if (urb == portdata->out_urbs[i]) { |
| clear_bit(i, &portdata->out_busy); |
| break; |
| } |
| } |
| } |
| |
| static void play_delayed(struct usb_serial_port *port) |
| { |
| struct usb_wwan_intf_private *data; |
| struct usb_wwan_port_private *portdata; |
| struct urb *urb; |
| int err; |
| |
| portdata = usb_get_serial_port_data(port); |
| data = port->serial->private; |
| while ((urb = usb_get_from_anchor(&portdata->delayed))) { |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (!err) { |
| data->in_flight++; |
| } else { |
| /* we have to throw away the rest */ |
| do { |
| unbusy_queued_urb(urb, portdata); |
| usb_autopm_put_interface_no_suspend(port->serial->interface); |
| } while ((urb = usb_get_from_anchor(&portdata->delayed))); |
| break; |
| } |
| } |
| } |
| |
| int usb_wwan_resume(struct usb_serial *serial) |
| { |
| int i, j; |
| struct usb_serial_port *port; |
| struct usb_wwan_intf_private *intfdata = serial->private; |
| struct usb_wwan_port_private *portdata; |
| struct urb *urb; |
| int err = 0; |
| |
| /* get the interrupt URBs resubmitted unconditionally */ |
| for (i = 0; i < serial->num_ports; i++) { |
| port = serial->port[i]; |
| if (!port->interrupt_in_urb) { |
| dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__); |
| continue; |
| } |
| err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); |
| dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err); |
| if (err < 0) { |
| dev_err(&port->dev, "%s: Error %d for interrupt URB\n", |
| __func__, err); |
| goto err_out; |
| } |
| } |
| |
| for (i = 0; i < serial->num_ports; i++) { |
| /* walk all ports */ |
| port = serial->port[i]; |
| portdata = usb_get_serial_port_data(port); |
| |
| /* skip closed ports */ |
| spin_lock_irq(&intfdata->susp_lock); |
| if (!portdata || !portdata->opened) { |
| spin_unlock_irq(&intfdata->susp_lock); |
| continue; |
| } |
| |
| for (j = 0; j < N_IN_URB; j++) { |
| urb = portdata->in_urbs[j]; |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err < 0) { |
| dev_err(&port->dev, "%s: Error %d for bulk URB %d\n", |
| __func__, err, i); |
| spin_unlock_irq(&intfdata->susp_lock); |
| goto err_out; |
| } |
| } |
| play_delayed(port); |
| spin_unlock_irq(&intfdata->susp_lock); |
| } |
| spin_lock_irq(&intfdata->susp_lock); |
| intfdata->suspended = 0; |
| spin_unlock_irq(&intfdata->susp_lock); |
| err_out: |
| return err; |
| } |
| EXPORT_SYMBOL(usb_wwan_resume); |
| #endif |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |