| /* |
| * rsrc_nonstatic.c -- Resource management routines for !SS_CAP_STATIC_MAP sockets |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| * |
| * (C) 1999 David A. Hinds |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/ioport.h> |
| #include <linux/timer.h> |
| #include <linux/pci.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| |
| #include <asm/irq.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include "cs_internal.h" |
| |
| /* moved to rsrc_mgr.c |
| MODULE_AUTHOR("David A. Hinds, Dominik Brodowski"); |
| MODULE_LICENSE("GPL"); |
| */ |
| |
| /* Parameters that can be set with 'insmod' */ |
| |
| #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) |
| |
| INT_MODULE_PARM(probe_mem, 1); /* memory probe? */ |
| #ifdef CONFIG_PCMCIA_PROBE |
| INT_MODULE_PARM(probe_io, 1); /* IO port probe? */ |
| INT_MODULE_PARM(mem_limit, 0x10000); |
| #endif |
| |
| /* for io_db and mem_db */ |
| struct resource_map { |
| u_long base, num; |
| struct resource_map *next; |
| }; |
| |
| struct socket_data { |
| struct resource_map mem_db; |
| struct resource_map mem_db_valid; |
| struct resource_map io_db; |
| }; |
| |
| #define MEM_PROBE_LOW (1 << 0) |
| #define MEM_PROBE_HIGH (1 << 1) |
| |
| |
| /*====================================================================== |
| |
| Linux resource management extensions |
| |
| ======================================================================*/ |
| |
| static struct resource * |
| claim_region(struct pcmcia_socket *s, resource_size_t base, |
| resource_size_t size, int type, char *name) |
| { |
| struct resource *res, *parent; |
| |
| parent = type & IORESOURCE_MEM ? &iomem_resource : &ioport_resource; |
| res = pcmcia_make_resource(base, size, type | IORESOURCE_BUSY, name); |
| |
| if (res) { |
| #ifdef CONFIG_PCI |
| if (s && s->cb_dev) |
| parent = pci_find_parent_resource(s->cb_dev, res); |
| #endif |
| if (!parent || request_resource(parent, res)) { |
| kfree(res); |
| res = NULL; |
| } |
| } |
| return res; |
| } |
| |
| static void free_region(struct resource *res) |
| { |
| if (res) { |
| release_resource(res); |
| kfree(res); |
| } |
| } |
| |
| /*====================================================================== |
| |
| These manage the internal databases of available resources. |
| |
| ======================================================================*/ |
| |
| static int add_interval(struct resource_map *map, u_long base, u_long num) |
| { |
| struct resource_map *p, *q; |
| |
| for (p = map; ; p = p->next) { |
| if ((p != map) && (p->base+p->num >= base)) { |
| p->num = max(num + base - p->base, p->num); |
| return 0; |
| } |
| if ((p->next == map) || (p->next->base > base+num-1)) |
| break; |
| } |
| q = kmalloc(sizeof(struct resource_map), GFP_KERNEL); |
| if (!q) { |
| printk(KERN_WARNING "out of memory to update resources\n"); |
| return -ENOMEM; |
| } |
| q->base = base; q->num = num; |
| q->next = p->next; p->next = q; |
| return 0; |
| } |
| |
| /*====================================================================*/ |
| |
| static int sub_interval(struct resource_map *map, u_long base, u_long num) |
| { |
| struct resource_map *p, *q; |
| |
| for (p = map; ; p = q) { |
| q = p->next; |
| if (q == map) |
| break; |
| if ((q->base+q->num > base) && (base+num > q->base)) { |
| if (q->base >= base) { |
| if (q->base+q->num <= base+num) { |
| /* Delete whole block */ |
| p->next = q->next; |
| kfree(q); |
| /* don't advance the pointer yet */ |
| q = p; |
| } else { |
| /* Cut off bit from the front */ |
| q->num = q->base + q->num - base - num; |
| q->base = base + num; |
| } |
| } else if (q->base+q->num <= base+num) { |
| /* Cut off bit from the end */ |
| q->num = base - q->base; |
| } else { |
| /* Split the block into two pieces */ |
| p = kmalloc(sizeof(struct resource_map), |
| GFP_KERNEL); |
| if (!p) { |
| printk(KERN_WARNING "out of memory to update resources\n"); |
| return -ENOMEM; |
| } |
| p->base = base+num; |
| p->num = q->base+q->num - p->base; |
| q->num = base - q->base; |
| p->next = q->next ; q->next = p; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /*====================================================================== |
| |
| These routines examine a region of IO or memory addresses to |
| determine what ranges might be genuinely available. |
| |
| ======================================================================*/ |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| static void do_io_probe(struct pcmcia_socket *s, unsigned int base, |
| unsigned int num) |
| { |
| struct resource *res; |
| struct socket_data *s_data = s->resource_data; |
| unsigned int i, j, bad; |
| int any; |
| u_char *b, hole, most; |
| |
| dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:", |
| base, base+num-1); |
| |
| /* First, what does a floating port look like? */ |
| b = kzalloc(256, GFP_KERNEL); |
| if (!b) { |
| printk("\n"); |
| dev_printk(KERN_ERR, &s->dev, |
| "do_io_probe: unable to kmalloc 256 bytes"); |
| return; |
| } |
| for (i = base, most = 0; i < base+num; i += 8) { |
| res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe"); |
| if (!res) |
| continue; |
| hole = inb(i); |
| for (j = 1; j < 8; j++) |
| if (inb(i+j) != hole) |
| break; |
| free_region(res); |
| if ((j == 8) && (++b[hole] > b[most])) |
| most = hole; |
| if (b[most] == 127) |
| break; |
| } |
| kfree(b); |
| |
| bad = any = 0; |
| for (i = base; i < base+num; i += 8) { |
| res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe"); |
| if (!res) { |
| if (!any) |
| printk(" excluding"); |
| if (!bad) |
| bad = any = i; |
| continue; |
| } |
| for (j = 0; j < 8; j++) |
| if (inb(i+j) != most) |
| break; |
| free_region(res); |
| if (j < 8) { |
| if (!any) |
| printk(" excluding"); |
| if (!bad) |
| bad = any = i; |
| } else { |
| if (bad) { |
| sub_interval(&s_data->io_db, bad, i-bad); |
| printk(" %#x-%#x", bad, i-1); |
| bad = 0; |
| } |
| } |
| } |
| if (bad) { |
| if ((num > 16) && (bad == base) && (i == base+num)) { |
| sub_interval(&s_data->io_db, bad, i-bad); |
| printk(" nothing: probe failed.\n"); |
| return; |
| } else { |
| sub_interval(&s_data->io_db, bad, i-bad); |
| printk(" %#x-%#x", bad, i-1); |
| } |
| } |
| |
| printk(any ? "\n" : " clean.\n"); |
| } |
| #endif |
| |
| /*======================================================================*/ |
| |
| /** |
| * readable() - iomem validation function for cards with a valid CIS |
| */ |
| static int readable(struct pcmcia_socket *s, struct resource *res, |
| unsigned int *count) |
| { |
| int ret = -EINVAL; |
| |
| if (s->fake_cis) { |
| dev_dbg(&s->dev, "fake CIS is being used: can't validate mem\n"); |
| return 0; |
| } |
| |
| s->cis_mem.res = res; |
| s->cis_virt = ioremap(res->start, s->map_size); |
| if (s->cis_virt) { |
| mutex_unlock(&s->ops_mutex); |
| /* as we're only called from pcmcia.c, we're safe */ |
| if (s->callback->validate) |
| ret = s->callback->validate(s, count); |
| /* invalidate mapping */ |
| mutex_lock(&s->ops_mutex); |
| iounmap(s->cis_virt); |
| s->cis_virt = NULL; |
| } |
| s->cis_mem.res = NULL; |
| if ((ret) || (*count == 0)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| /** |
| * checksum() - iomem validation function for simple memory cards |
| */ |
| static int checksum(struct pcmcia_socket *s, struct resource *res, |
| unsigned int *value) |
| { |
| pccard_mem_map map; |
| int i, a = 0, b = -1, d; |
| void __iomem *virt; |
| |
| virt = ioremap(res->start, s->map_size); |
| if (virt) { |
| map.map = 0; |
| map.flags = MAP_ACTIVE; |
| map.speed = 0; |
| map.res = res; |
| map.card_start = 0; |
| s->ops->set_mem_map(s, &map); |
| |
| /* Don't bother checking every word... */ |
| for (i = 0; i < s->map_size; i += 44) { |
| d = readl(virt+i); |
| a += d; |
| b &= d; |
| } |
| |
| map.flags = 0; |
| s->ops->set_mem_map(s, &map); |
| |
| iounmap(virt); |
| } |
| |
| if (b == -1) |
| return -EINVAL; |
| |
| *value = a; |
| |
| return 0; |
| } |
| |
| /** |
| * do_validate_mem() - low level validate a memory region for PCMCIA use |
| * @s: PCMCIA socket to validate |
| * @base: start address of resource to check |
| * @size: size of resource to check |
| * @validate: validation function to use |
| * |
| * do_validate_mem() splits up the memory region which is to be checked |
| * into two parts. Both are passed to the @validate() function. If |
| * @validate() returns non-zero, or the value parameter to @validate() |
| * is zero, or the value parameter is different between both calls, |
| * the check fails, and -EINVAL is returned. Else, 0 is returned. |
| */ |
| static int do_validate_mem(struct pcmcia_socket *s, |
| unsigned long base, unsigned long size, |
| int validate (struct pcmcia_socket *s, |
| struct resource *res, |
| unsigned int *value)) |
| { |
| struct socket_data *s_data = s->resource_data; |
| struct resource *res1, *res2; |
| unsigned int info1 = 1, info2 = 1; |
| int ret = -EINVAL; |
| |
| res1 = claim_region(s, base, size/2, IORESOURCE_MEM, "PCMCIA memprobe"); |
| res2 = claim_region(s, base + size/2, size/2, IORESOURCE_MEM, |
| "PCMCIA memprobe"); |
| |
| if (res1 && res2) { |
| ret = 0; |
| if (validate) { |
| ret = validate(s, res1, &info1); |
| ret += validate(s, res2, &info2); |
| } |
| } |
| |
| free_region(res2); |
| free_region(res1); |
| |
| dev_dbg(&s->dev, "cs: memory probe 0x%06lx-0x%06lx: %p %p %u %u %u", |
| base, base+size-1, res1, res2, ret, info1, info2); |
| |
| if ((ret) || (info1 != info2) || (info1 == 0)) |
| return -EINVAL; |
| |
| if (validate && !s->fake_cis) { |
| /* move it to the validated data set */ |
| add_interval(&s_data->mem_db_valid, base, size); |
| sub_interval(&s_data->mem_db, base, size); |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * do_mem_probe() - validate a memory region for PCMCIA use |
| * @s: PCMCIA socket to validate |
| * @base: start address of resource to check |
| * @num: size of resource to check |
| * @validate: validation function to use |
| * @fallback: validation function to use if validate fails |
| * |
| * do_mem_probe() checks a memory region for use by the PCMCIA subsystem. |
| * To do so, the area is split up into sensible parts, and then passed |
| * into the @validate() function. Only if @validate() and @fallback() fail, |
| * the area is marked as unavaibale for use by the PCMCIA subsystem. The |
| * function returns the size of the usable memory area. |
| */ |
| static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num, |
| int validate (struct pcmcia_socket *s, |
| struct resource *res, |
| unsigned int *value), |
| int fallback (struct pcmcia_socket *s, |
| struct resource *res, |
| unsigned int *value)) |
| { |
| struct socket_data *s_data = s->resource_data; |
| u_long i, j, bad, fail, step; |
| |
| dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:", |
| base, base+num-1); |
| bad = fail = 0; |
| step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff); |
| /* don't allow too large steps */ |
| if (step > 0x800000) |
| step = 0x800000; |
| /* cis_readable wants to map 2x map_size */ |
| if (step < 2 * s->map_size) |
| step = 2 * s->map_size; |
| for (i = j = base; i < base+num; i = j + step) { |
| if (!fail) { |
| for (j = i; j < base+num; j += step) { |
| if (!do_validate_mem(s, j, step, validate)) |
| break; |
| } |
| fail = ((i == base) && (j == base+num)); |
| } |
| if ((fail) && (fallback)) { |
| for (j = i; j < base+num; j += step) |
| if (!do_validate_mem(s, j, step, fallback)) |
| break; |
| } |
| if (i != j) { |
| if (!bad) |
| printk(" excluding"); |
| printk(" %#05lx-%#05lx", i, j-1); |
| sub_interval(&s_data->mem_db, i, j-i); |
| bad += j-i; |
| } |
| } |
| printk(bad ? "\n" : " clean.\n"); |
| return num - bad; |
| } |
| |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| |
| /** |
| * inv_probe() - top-to-bottom search for one usuable high memory area |
| * @s: PCMCIA socket to validate |
| * @m: resource_map to check |
| */ |
| static u_long inv_probe(struct resource_map *m, struct pcmcia_socket *s) |
| { |
| struct socket_data *s_data = s->resource_data; |
| u_long ok; |
| if (m == &s_data->mem_db) |
| return 0; |
| ok = inv_probe(m->next, s); |
| if (ok) { |
| if (m->base >= 0x100000) |
| sub_interval(&s_data->mem_db, m->base, m->num); |
| return ok; |
| } |
| if (m->base < 0x100000) |
| return 0; |
| return do_mem_probe(s, m->base, m->num, readable, checksum); |
| } |
| |
| /** |
| * validate_mem() - memory probe function |
| * @s: PCMCIA socket to validate |
| * @probe_mask: MEM_PROBE_LOW | MEM_PROBE_HIGH |
| * |
| * The memory probe. If the memory list includes a 64K-aligned block |
| * below 1MB, we probe in 64K chunks, and as soon as we accumulate at |
| * least mem_limit free space, we quit. Returns 0 on usuable ports. |
| */ |
| static int validate_mem(struct pcmcia_socket *s, unsigned int probe_mask) |
| { |
| struct resource_map *m, mm; |
| static unsigned char order[] = { 0xd0, 0xe0, 0xc0, 0xf0 }; |
| unsigned long b, i, ok = 0; |
| struct socket_data *s_data = s->resource_data; |
| |
| /* We do up to four passes through the list */ |
| if (probe_mask & MEM_PROBE_HIGH) { |
| if (inv_probe(s_data->mem_db.next, s) > 0) |
| return 0; |
| if (s_data->mem_db_valid.next != &s_data->mem_db_valid) |
| return 0; |
| dev_printk(KERN_NOTICE, &s->dev, |
| "cs: warning: no high memory space available!\n"); |
| return -ENODEV; |
| } |
| |
| for (m = s_data->mem_db.next; m != &s_data->mem_db; m = mm.next) { |
| mm = *m; |
| /* Only probe < 1 MB */ |
| if (mm.base >= 0x100000) |
| continue; |
| if ((mm.base | mm.num) & 0xffff) { |
| ok += do_mem_probe(s, mm.base, mm.num, readable, |
| checksum); |
| continue; |
| } |
| /* Special probe for 64K-aligned block */ |
| for (i = 0; i < 4; i++) { |
| b = order[i] << 12; |
| if ((b >= mm.base) && (b+0x10000 <= mm.base+mm.num)) { |
| if (ok >= mem_limit) |
| sub_interval(&s_data->mem_db, b, 0x10000); |
| else |
| ok += do_mem_probe(s, b, 0x10000, |
| readable, checksum); |
| } |
| } |
| } |
| |
| if (ok > 0) |
| return 0; |
| |
| return -ENODEV; |
| } |
| |
| #else /* CONFIG_PCMCIA_PROBE */ |
| |
| /** |
| * validate_mem() - memory probe function |
| * @s: PCMCIA socket to validate |
| * @probe_mask: ignored |
| * |
| * Returns 0 on usuable ports. |
| */ |
| static int validate_mem(struct pcmcia_socket *s, unsigned int probe_mask) |
| { |
| struct resource_map *m, mm; |
| struct socket_data *s_data = s->resource_data; |
| unsigned long ok = 0; |
| |
| for (m = s_data->mem_db.next; m != &s_data->mem_db; m = mm.next) { |
| mm = *m; |
| ok += do_mem_probe(s, mm.base, mm.num, readable, checksum); |
| } |
| if (ok > 0) |
| return 0; |
| return -ENODEV; |
| } |
| |
| #endif /* CONFIG_PCMCIA_PROBE */ |
| |
| |
| /** |
| * pcmcia_nonstatic_validate_mem() - try to validate iomem for PCMCIA use |
| * @s: PCMCIA socket to validate |
| * |
| * This is tricky... when we set up CIS memory, we try to validate |
| * the memory window space allocations. |
| * |
| * Locking note: Must be called with skt_mutex held! |
| */ |
| static int pcmcia_nonstatic_validate_mem(struct pcmcia_socket *s) |
| { |
| struct socket_data *s_data = s->resource_data; |
| unsigned int probe_mask = MEM_PROBE_LOW; |
| int ret; |
| |
| if (!probe_mem || !(s->state & SOCKET_PRESENT)) |
| return 0; |
| |
| if (s->features & SS_CAP_PAGE_REGS) |
| probe_mask = MEM_PROBE_HIGH; |
| |
| ret = validate_mem(s, probe_mask); |
| |
| if (s_data->mem_db_valid.next != &s_data->mem_db_valid) |
| return 0; |
| |
| return ret; |
| } |
| |
| struct pcmcia_align_data { |
| unsigned long mask; |
| unsigned long offset; |
| struct resource_map *map; |
| }; |
| |
| static resource_size_t pcmcia_common_align(struct pcmcia_align_data *align_data, |
| resource_size_t start) |
| { |
| resource_size_t ret; |
| /* |
| * Ensure that we have the correct start address |
| */ |
| ret = (start & ~align_data->mask) + align_data->offset; |
| if (ret < start) |
| ret += align_data->mask + 1; |
| return ret; |
| } |
| |
| static resource_size_t |
| pcmcia_align(void *align_data, const struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| struct pcmcia_align_data *data = align_data; |
| struct resource_map *m; |
| resource_size_t start; |
| |
| start = pcmcia_common_align(data, res->start); |
| |
| for (m = data->map->next; m != data->map; m = m->next) { |
| unsigned long map_start = m->base; |
| unsigned long map_end = m->base + m->num - 1; |
| |
| /* |
| * If the lower resources are not available, try aligning |
| * to this entry of the resource database to see if it'll |
| * fit here. |
| */ |
| if (start < map_start) |
| start = pcmcia_common_align(data, map_start); |
| |
| /* |
| * If we're above the area which was passed in, there's |
| * no point proceeding. |
| */ |
| if (start >= res->end) |
| break; |
| |
| if ((start + size - 1) <= map_end) |
| break; |
| } |
| |
| /* |
| * If we failed to find something suitable, ensure we fail. |
| */ |
| if (m == data->map) |
| start = res->end; |
| |
| return start; |
| } |
| |
| /* |
| * Adjust an existing IO region allocation, but making sure that we don't |
| * encroach outside the resources which the user supplied. |
| */ |
| static int __nonstatic_adjust_io_region(struct pcmcia_socket *s, |
| unsigned long r_start, |
| unsigned long r_end) |
| { |
| struct resource_map *m; |
| struct socket_data *s_data = s->resource_data; |
| int ret = -ENOMEM; |
| |
| for (m = s_data->io_db.next; m != &s_data->io_db; m = m->next) { |
| unsigned long start = m->base; |
| unsigned long end = m->base + m->num - 1; |
| |
| if (start > r_start || r_end > end) |
| continue; |
| |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /*====================================================================== |
| |
| These find ranges of I/O ports or memory addresses that are not |
| currently allocated by other devices. |
| |
| The 'align' field should reflect the number of bits of address |
| that need to be preserved from the initial value of *base. It |
| should be a power of two, greater than or equal to 'num'. A value |
| of 0 means that all bits of *base are significant. *base should |
| also be strictly less than 'align'. |
| |
| ======================================================================*/ |
| |
| static struct resource *__nonstatic_find_io_region(struct pcmcia_socket *s, |
| unsigned long base, int num, |
| unsigned long align) |
| { |
| struct resource *res = pcmcia_make_resource(0, num, IORESOURCE_IO, |
| dev_name(&s->dev)); |
| struct socket_data *s_data = s->resource_data; |
| struct pcmcia_align_data data; |
| unsigned long min = base; |
| int ret; |
| |
| data.mask = align - 1; |
| data.offset = base & data.mask; |
| data.map = &s_data->io_db; |
| |
| #ifdef CONFIG_PCI |
| if (s->cb_dev) { |
| ret = pci_bus_alloc_resource(s->cb_dev->bus, res, num, 1, |
| min, 0, pcmcia_align, &data); |
| } else |
| #endif |
| ret = allocate_resource(&ioport_resource, res, num, min, ~0UL, |
| 1, pcmcia_align, &data); |
| |
| if (ret != 0) { |
| kfree(res); |
| res = NULL; |
| } |
| return res; |
| } |
| |
| static int nonstatic_find_io(struct pcmcia_socket *s, unsigned int attr, |
| unsigned int *base, unsigned int num, |
| unsigned int align) |
| { |
| int i, ret = 0; |
| |
| /* Check for an already-allocated window that must conflict with |
| * what was asked for. It is a hack because it does not catch all |
| * potential conflicts, just the most obvious ones. |
| */ |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) |
| continue; |
| |
| if (!*base) |
| continue; |
| |
| if ((s->io[i].res->start & (align-1)) == *base) |
| return -EBUSY; |
| } |
| |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| struct resource *res = s->io[i].res; |
| unsigned int try; |
| |
| if (res && (res->flags & IORESOURCE_BITS) != |
| (attr & IORESOURCE_BITS)) |
| continue; |
| |
| if (!res) { |
| if (align == 0) |
| align = 0x10000; |
| |
| res = s->io[i].res = __nonstatic_find_io_region(s, |
| *base, num, |
| align); |
| if (!res) |
| return -EINVAL; |
| |
| *base = res->start; |
| s->io[i].res->flags = |
| ((res->flags & ~IORESOURCE_BITS) | |
| (attr & IORESOURCE_BITS)); |
| s->io[i].InUse = num; |
| return 0; |
| } |
| |
| /* Try to extend top of window */ |
| try = res->end + 1; |
| if ((*base == 0) || (*base == try)) { |
| ret = __nonstatic_adjust_io_region(s, res->start, |
| res->end + num); |
| if (!ret) { |
| ret = adjust_resource(s->io[i].res, res->start, |
| res->end - res->start + num + 1); |
| if (ret) |
| continue; |
| *base = try; |
| s->io[i].InUse += num; |
| return 0; |
| } |
| } |
| |
| /* Try to extend bottom of window */ |
| try = res->start - num; |
| if ((*base == 0) || (*base == try)) { |
| ret = __nonstatic_adjust_io_region(s, |
| res->start - num, |
| res->end); |
| if (!ret) { |
| ret = adjust_resource(s->io[i].res, |
| res->start - num, |
| res->end - res->start + num + 1); |
| if (ret) |
| continue; |
| *base = try; |
| s->io[i].InUse += num; |
| return 0; |
| } |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| |
| static struct resource *nonstatic_find_mem_region(u_long base, u_long num, |
| u_long align, int low, struct pcmcia_socket *s) |
| { |
| struct resource *res = pcmcia_make_resource(0, num, IORESOURCE_MEM, |
| dev_name(&s->dev)); |
| struct socket_data *s_data = s->resource_data; |
| struct pcmcia_align_data data; |
| unsigned long min, max; |
| int ret, i, j; |
| |
| low = low || !(s->features & SS_CAP_PAGE_REGS); |
| |
| data.mask = align - 1; |
| data.offset = base & data.mask; |
| |
| for (i = 0; i < 2; i++) { |
| data.map = &s_data->mem_db_valid; |
| if (low) { |
| max = 0x100000UL; |
| min = base < max ? base : 0; |
| } else { |
| max = ~0UL; |
| min = 0x100000UL + base; |
| } |
| |
| for (j = 0; j < 2; j++) { |
| #ifdef CONFIG_PCI |
| if (s->cb_dev) { |
| ret = pci_bus_alloc_resource(s->cb_dev->bus, |
| res, num, 1, min, 0, |
| pcmcia_align, &data); |
| } else |
| #endif |
| { |
| ret = allocate_resource(&iomem_resource, |
| res, num, min, max, 1, |
| pcmcia_align, &data); |
| } |
| if (ret == 0) |
| break; |
| data.map = &s_data->mem_db; |
| } |
| if (ret == 0 || low) |
| break; |
| low = 1; |
| } |
| |
| if (ret != 0) { |
| kfree(res); |
| res = NULL; |
| } |
| return res; |
| } |
| |
| |
| static int adjust_memory(struct pcmcia_socket *s, unsigned int action, unsigned long start, unsigned long end) |
| { |
| struct socket_data *data = s->resource_data; |
| unsigned long size = end - start + 1; |
| int ret = 0; |
| |
| if (end < start) |
| return -EINVAL; |
| |
| switch (action) { |
| case ADD_MANAGED_RESOURCE: |
| ret = add_interval(&data->mem_db, start, size); |
| if (!ret) |
| do_mem_probe(s, start, size, NULL, NULL); |
| break; |
| case REMOVE_MANAGED_RESOURCE: |
| ret = sub_interval(&data->mem_db, start, size); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| |
| static int adjust_io(struct pcmcia_socket *s, unsigned int action, unsigned long start, unsigned long end) |
| { |
| struct socket_data *data = s->resource_data; |
| unsigned long size; |
| int ret = 0; |
| |
| #if defined(CONFIG_X86) |
| /* on x86, avoid anything < 0x100 for it is often used for |
| * legacy platform devices */ |
| if (start < 0x100) |
| start = 0x100; |
| #endif |
| |
| size = end - start + 1; |
| |
| if (end < start) |
| return -EINVAL; |
| |
| if (end > IO_SPACE_LIMIT) |
| return -EINVAL; |
| |
| switch (action) { |
| case ADD_MANAGED_RESOURCE: |
| if (add_interval(&data->io_db, start, size) != 0) { |
| ret = -EBUSY; |
| break; |
| } |
| #ifdef CONFIG_PCMCIA_PROBE |
| if (probe_io) |
| do_io_probe(s, start, size); |
| #endif |
| break; |
| case REMOVE_MANAGED_RESOURCE: |
| sub_interval(&data->io_db, start, size); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| |
| #ifdef CONFIG_PCI |
| static int nonstatic_autoadd_resources(struct pcmcia_socket *s) |
| { |
| struct resource *res; |
| int i, done = 0; |
| |
| if (!s->cb_dev || !s->cb_dev->bus) |
| return -ENODEV; |
| |
| #if defined(CONFIG_X86) |
| /* If this is the root bus, the risk of hitting some strange |
| * system devices is too high: If a driver isn't loaded, the |
| * resources are not claimed; even if a driver is loaded, it |
| * may not request all resources or even the wrong one. We |
| * can neither trust the rest of the kernel nor ACPI/PNP and |
| * CRS parsing to get it right. Therefore, use several |
| * safeguards: |
| * |
| * - Do not auto-add resources if the CardBus bridge is on |
| * the PCI root bus |
| * |
| * - Avoid any I/O ports < 0x100. |
| * |
| * - On PCI-PCI bridges, only use resources which are set up |
| * exclusively for the secondary PCI bus: the risk of hitting |
| * system devices is quite low, as they usually aren't |
| * connected to the secondary PCI bus. |
| */ |
| if (s->cb_dev->bus->number == 0) |
| return -EINVAL; |
| |
| for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { |
| res = s->cb_dev->bus->resource[i]; |
| #else |
| pci_bus_for_each_resource(s->cb_dev->bus, res, i) { |
| #endif |
| if (!res) |
| continue; |
| |
| if (res->flags & IORESOURCE_IO) { |
| /* safeguard against the root resource, where the |
| * risk of hitting any other device would be too |
| * high */ |
| if (res == &ioport_resource) |
| continue; |
| |
| dev_printk(KERN_INFO, &s->cb_dev->dev, |
| "pcmcia: parent PCI bridge window: %pR\n", |
| res); |
| if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end)) |
| done |= IORESOURCE_IO; |
| |
| } |
| |
| if (res->flags & IORESOURCE_MEM) { |
| /* safeguard against the root resource, where the |
| * risk of hitting any other device would be too |
| * high */ |
| if (res == &iomem_resource) |
| continue; |
| |
| dev_printk(KERN_INFO, &s->cb_dev->dev, |
| "pcmcia: parent PCI bridge window: %pR\n", |
| res); |
| if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end)) |
| done |= IORESOURCE_MEM; |
| } |
| } |
| |
| /* if we got at least one of IO, and one of MEM, we can be glad and |
| * activate the PCMCIA subsystem */ |
| if (done == (IORESOURCE_MEM | IORESOURCE_IO)) |
| s->resource_setup_done = 1; |
| |
| return 0; |
| } |
| |
| #else |
| |
| static inline int nonstatic_autoadd_resources(struct pcmcia_socket *s) |
| { |
| return -ENODEV; |
| } |
| |
| #endif |
| |
| |
| static int nonstatic_init(struct pcmcia_socket *s) |
| { |
| struct socket_data *data; |
| |
| data = kzalloc(sizeof(struct socket_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->mem_db.next = &data->mem_db; |
| data->mem_db_valid.next = &data->mem_db_valid; |
| data->io_db.next = &data->io_db; |
| |
| s->resource_data = (void *) data; |
| |
| nonstatic_autoadd_resources(s); |
| |
| return 0; |
| } |
| |
| static void nonstatic_release_resource_db(struct pcmcia_socket *s) |
| { |
| struct socket_data *data = s->resource_data; |
| struct resource_map *p, *q; |
| |
| for (p = data->mem_db_valid.next; p != &data->mem_db_valid; p = q) { |
| q = p->next; |
| kfree(p); |
| } |
| for (p = data->mem_db.next; p != &data->mem_db; p = q) { |
| q = p->next; |
| kfree(p); |
| } |
| for (p = data->io_db.next; p != &data->io_db; p = q) { |
| q = p->next; |
| kfree(p); |
| } |
| } |
| |
| |
| struct pccard_resource_ops pccard_nonstatic_ops = { |
| .validate_mem = pcmcia_nonstatic_validate_mem, |
| .find_io = nonstatic_find_io, |
| .find_mem = nonstatic_find_mem_region, |
| .add_io = adjust_io, |
| .add_mem = adjust_memory, |
| .init = nonstatic_init, |
| .exit = nonstatic_release_resource_db, |
| }; |
| EXPORT_SYMBOL(pccard_nonstatic_ops); |
| |
| |
| /* sysfs interface to the resource database */ |
| |
| static ssize_t show_io_db(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct pcmcia_socket *s = dev_get_drvdata(dev); |
| struct socket_data *data; |
| struct resource_map *p; |
| ssize_t ret = 0; |
| |
| mutex_lock(&s->ops_mutex); |
| data = s->resource_data; |
| |
| for (p = data->io_db.next; p != &data->io_db; p = p->next) { |
| if (ret > (PAGE_SIZE - 10)) |
| continue; |
| ret += snprintf(&buf[ret], (PAGE_SIZE - ret - 1), |
| "0x%08lx - 0x%08lx\n", |
| ((unsigned long) p->base), |
| ((unsigned long) p->base + p->num - 1)); |
| } |
| |
| mutex_unlock(&s->ops_mutex); |
| return ret; |
| } |
| |
| static ssize_t store_io_db(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct pcmcia_socket *s = dev_get_drvdata(dev); |
| unsigned long start_addr, end_addr; |
| unsigned int add = ADD_MANAGED_RESOURCE; |
| ssize_t ret = 0; |
| |
| ret = sscanf(buf, "+ 0x%lx - 0x%lx", &start_addr, &end_addr); |
| if (ret != 2) { |
| ret = sscanf(buf, "- 0x%lx - 0x%lx", &start_addr, &end_addr); |
| add = REMOVE_MANAGED_RESOURCE; |
| if (ret != 2) { |
| ret = sscanf(buf, "0x%lx - 0x%lx", &start_addr, |
| &end_addr); |
| add = ADD_MANAGED_RESOURCE; |
| if (ret != 2) |
| return -EINVAL; |
| } |
| } |
| if (end_addr < start_addr) |
| return -EINVAL; |
| |
| mutex_lock(&s->ops_mutex); |
| ret = adjust_io(s, add, start_addr, end_addr); |
| if (!ret) |
| s->resource_setup_new = 1; |
| mutex_unlock(&s->ops_mutex); |
| |
| return ret ? ret : count; |
| } |
| static DEVICE_ATTR(available_resources_io, 0600, show_io_db, store_io_db); |
| |
| static ssize_t show_mem_db(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct pcmcia_socket *s = dev_get_drvdata(dev); |
| struct socket_data *data; |
| struct resource_map *p; |
| ssize_t ret = 0; |
| |
| mutex_lock(&s->ops_mutex); |
| data = s->resource_data; |
| |
| for (p = data->mem_db_valid.next; p != &data->mem_db_valid; |
| p = p->next) { |
| if (ret > (PAGE_SIZE - 10)) |
| continue; |
| ret += snprintf(&buf[ret], (PAGE_SIZE - ret - 1), |
| "0x%08lx - 0x%08lx\n", |
| ((unsigned long) p->base), |
| ((unsigned long) p->base + p->num - 1)); |
| } |
| |
| for (p = data->mem_db.next; p != &data->mem_db; p = p->next) { |
| if (ret > (PAGE_SIZE - 10)) |
| continue; |
| ret += snprintf(&buf[ret], (PAGE_SIZE - ret - 1), |
| "0x%08lx - 0x%08lx\n", |
| ((unsigned long) p->base), |
| ((unsigned long) p->base + p->num - 1)); |
| } |
| |
| mutex_unlock(&s->ops_mutex); |
| return ret; |
| } |
| |
| static ssize_t store_mem_db(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct pcmcia_socket *s = dev_get_drvdata(dev); |
| unsigned long start_addr, end_addr; |
| unsigned int add = ADD_MANAGED_RESOURCE; |
| ssize_t ret = 0; |
| |
| ret = sscanf(buf, "+ 0x%lx - 0x%lx", &start_addr, &end_addr); |
| if (ret != 2) { |
| ret = sscanf(buf, "- 0x%lx - 0x%lx", &start_addr, &end_addr); |
| add = REMOVE_MANAGED_RESOURCE; |
| if (ret != 2) { |
| ret = sscanf(buf, "0x%lx - 0x%lx", &start_addr, |
| &end_addr); |
| add = ADD_MANAGED_RESOURCE; |
| if (ret != 2) |
| return -EINVAL; |
| } |
| } |
| if (end_addr < start_addr) |
| return -EINVAL; |
| |
| mutex_lock(&s->ops_mutex); |
| ret = adjust_memory(s, add, start_addr, end_addr); |
| if (!ret) |
| s->resource_setup_new = 1; |
| mutex_unlock(&s->ops_mutex); |
| |
| return ret ? ret : count; |
| } |
| static DEVICE_ATTR(available_resources_mem, 0600, show_mem_db, store_mem_db); |
| |
| static struct attribute *pccard_rsrc_attributes[] = { |
| &dev_attr_available_resources_io.attr, |
| &dev_attr_available_resources_mem.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group rsrc_attributes = { |
| .attrs = pccard_rsrc_attributes, |
| }; |
| |
| static int __devinit pccard_sysfs_add_rsrc(struct device *dev, |
| struct class_interface *class_intf) |
| { |
| struct pcmcia_socket *s = dev_get_drvdata(dev); |
| |
| if (s->resource_ops != &pccard_nonstatic_ops) |
| return 0; |
| return sysfs_create_group(&dev->kobj, &rsrc_attributes); |
| } |
| |
| static void __devexit pccard_sysfs_remove_rsrc(struct device *dev, |
| struct class_interface *class_intf) |
| { |
| struct pcmcia_socket *s = dev_get_drvdata(dev); |
| |
| if (s->resource_ops != &pccard_nonstatic_ops) |
| return; |
| sysfs_remove_group(&dev->kobj, &rsrc_attributes); |
| } |
| |
| static struct class_interface pccard_rsrc_interface __refdata = { |
| .class = &pcmcia_socket_class, |
| .add_dev = &pccard_sysfs_add_rsrc, |
| .remove_dev = __devexit_p(&pccard_sysfs_remove_rsrc), |
| }; |
| |
| static int __init nonstatic_sysfs_init(void) |
| { |
| return class_interface_register(&pccard_rsrc_interface); |
| } |
| |
| static void __exit nonstatic_sysfs_exit(void) |
| { |
| class_interface_unregister(&pccard_rsrc_interface); |
| } |
| |
| module_init(nonstatic_sysfs_init); |
| module_exit(nonstatic_sysfs_exit); |