| /* |
| * Copyright 2010 PathScale inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: Martin Peres |
| */ |
| |
| #include <linux/module.h> |
| |
| #include "drmP.h" |
| |
| #include "nouveau_drv.h" |
| #include "nouveau_pm.h" |
| |
| static void |
| nouveau_temp_vbios_parse(struct drm_device *dev, u8 *temp) |
| { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_pm_engine *pm = &dev_priv->engine.pm; |
| struct nouveau_pm_temp_sensor_constants *sensor = &pm->sensor_constants; |
| struct nouveau_pm_threshold_temp *temps = &pm->threshold_temp; |
| int i, headerlen, recordlen, entries; |
| |
| if (!temp) { |
| NV_DEBUG(dev, "temperature table pointer invalid\n"); |
| return; |
| } |
| |
| /* Set the default sensor's contants */ |
| sensor->offset_constant = 0; |
| sensor->offset_mult = 0; |
| sensor->offset_div = 1; |
| sensor->slope_mult = 1; |
| sensor->slope_div = 1; |
| |
| /* Set the default temperature thresholds */ |
| temps->critical = 110; |
| temps->down_clock = 100; |
| temps->fan_boost = 90; |
| |
| /* Set the default range for the pwm fan */ |
| pm->fan.min_duty = 30; |
| pm->fan.max_duty = 100; |
| |
| /* Set the known default values to setup the temperature sensor */ |
| if (dev_priv->card_type >= NV_40) { |
| switch (dev_priv->chipset) { |
| case 0x43: |
| sensor->offset_mult = 32060; |
| sensor->offset_div = 1000; |
| sensor->slope_mult = 792; |
| sensor->slope_div = 1000; |
| break; |
| |
| case 0x44: |
| case 0x47: |
| case 0x4a: |
| sensor->offset_mult = 27839; |
| sensor->offset_div = 1000; |
| sensor->slope_mult = 780; |
| sensor->slope_div = 1000; |
| break; |
| |
| case 0x46: |
| sensor->offset_mult = -24775; |
| sensor->offset_div = 100; |
| sensor->slope_mult = 467; |
| sensor->slope_div = 10000; |
| break; |
| |
| case 0x49: |
| sensor->offset_mult = -25051; |
| sensor->offset_div = 100; |
| sensor->slope_mult = 458; |
| sensor->slope_div = 10000; |
| break; |
| |
| case 0x4b: |
| sensor->offset_mult = -24088; |
| sensor->offset_div = 100; |
| sensor->slope_mult = 442; |
| sensor->slope_div = 10000; |
| break; |
| |
| case 0x50: |
| sensor->offset_mult = -22749; |
| sensor->offset_div = 100; |
| sensor->slope_mult = 431; |
| sensor->slope_div = 10000; |
| break; |
| |
| case 0x67: |
| sensor->offset_mult = -26149; |
| sensor->offset_div = 100; |
| sensor->slope_mult = 484; |
| sensor->slope_div = 10000; |
| break; |
| } |
| } |
| |
| headerlen = temp[1]; |
| recordlen = temp[2]; |
| entries = temp[3]; |
| temp = temp + headerlen; |
| |
| /* Read the entries from the table */ |
| for (i = 0; i < entries; i++) { |
| s16 value = ROM16(temp[1]); |
| |
| switch (temp[0]) { |
| case 0x01: |
| if ((value & 0x8f) == 0) |
| sensor->offset_constant = (value >> 9) & 0x7f; |
| break; |
| |
| case 0x04: |
| if ((value & 0xf00f) == 0xa000) /* core */ |
| temps->critical = (value&0x0ff0) >> 4; |
| break; |
| |
| case 0x07: |
| if ((value & 0xf00f) == 0xa000) /* core */ |
| temps->down_clock = (value&0x0ff0) >> 4; |
| break; |
| |
| case 0x08: |
| if ((value & 0xf00f) == 0xa000) /* core */ |
| temps->fan_boost = (value&0x0ff0) >> 4; |
| break; |
| |
| case 0x10: |
| sensor->offset_mult = value; |
| break; |
| |
| case 0x11: |
| sensor->offset_div = value; |
| break; |
| |
| case 0x12: |
| sensor->slope_mult = value; |
| break; |
| |
| case 0x13: |
| sensor->slope_div = value; |
| break; |
| case 0x22: |
| pm->fan.min_duty = value & 0xff; |
| pm->fan.max_duty = (value & 0xff00) >> 8; |
| break; |
| case 0x26: |
| pm->fan.pwm_freq = value; |
| break; |
| } |
| temp += recordlen; |
| } |
| |
| nouveau_temp_safety_checks(dev); |
| |
| /* check the fan min/max settings */ |
| if (pm->fan.min_duty < 10) |
| pm->fan.min_duty = 10; |
| if (pm->fan.max_duty > 100) |
| pm->fan.max_duty = 100; |
| if (pm->fan.max_duty < pm->fan.min_duty) |
| pm->fan.max_duty = pm->fan.min_duty; |
| } |
| |
| static int |
| nv40_sensor_setup(struct drm_device *dev) |
| { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_pm_engine *pm = &dev_priv->engine.pm; |
| struct nouveau_pm_temp_sensor_constants *sensor = &pm->sensor_constants; |
| s32 offset = sensor->offset_mult / sensor->offset_div; |
| s32 sensor_calibration; |
| |
| /* set up the sensors */ |
| sensor_calibration = 120 - offset - sensor->offset_constant; |
| sensor_calibration = sensor_calibration * sensor->slope_div / |
| sensor->slope_mult; |
| |
| if (dev_priv->chipset >= 0x46) |
| sensor_calibration |= 0x80000000; |
| else |
| sensor_calibration |= 0x10000000; |
| |
| nv_wr32(dev, 0x0015b0, sensor_calibration); |
| |
| /* Wait for the sensor to update */ |
| msleep(5); |
| |
| /* read */ |
| return nv_rd32(dev, 0x0015b4) & 0x1fff; |
| } |
| |
| int |
| nv40_temp_get(struct drm_device *dev) |
| { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_pm_engine *pm = &dev_priv->engine.pm; |
| struct nouveau_pm_temp_sensor_constants *sensor = &pm->sensor_constants; |
| int offset = sensor->offset_mult / sensor->offset_div; |
| int core_temp; |
| |
| if (dev_priv->card_type >= NV_50) { |
| core_temp = nv_rd32(dev, 0x20008); |
| } else { |
| core_temp = nv_rd32(dev, 0x0015b4) & 0x1fff; |
| /* Setup the sensor if the temperature is 0 */ |
| if (core_temp == 0) |
| core_temp = nv40_sensor_setup(dev); |
| } |
| |
| core_temp = core_temp * sensor->slope_mult / sensor->slope_div; |
| core_temp = core_temp + offset + sensor->offset_constant; |
| |
| return core_temp; |
| } |
| |
| int |
| nv84_temp_get(struct drm_device *dev) |
| { |
| return nv_rd32(dev, 0x20400); |
| } |
| |
| void |
| nouveau_temp_safety_checks(struct drm_device *dev) |
| { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_pm_engine *pm = &dev_priv->engine.pm; |
| struct nouveau_pm_threshold_temp *temps = &pm->threshold_temp; |
| |
| if (temps->critical > 120) |
| temps->critical = 120; |
| else if (temps->critical < 80) |
| temps->critical = 80; |
| |
| if (temps->down_clock > 110) |
| temps->down_clock = 110; |
| else if (temps->down_clock < 60) |
| temps->down_clock = 60; |
| |
| if (temps->fan_boost > 100) |
| temps->fan_boost = 100; |
| else if (temps->fan_boost < 40) |
| temps->fan_boost = 40; |
| } |
| |
| static bool |
| probe_monitoring_device(struct nouveau_i2c_port *i2c, |
| struct i2c_board_info *info) |
| { |
| struct i2c_client *client; |
| |
| request_module("%s%s", I2C_MODULE_PREFIX, info->type); |
| |
| client = i2c_new_device(nouveau_i2c_adapter(i2c), info); |
| if (!client) |
| return false; |
| |
| if (!client->driver || client->driver->detect(client, info)) { |
| i2c_unregister_device(client); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void |
| nouveau_temp_probe_i2c(struct drm_device *dev) |
| { |
| struct i2c_board_info info[] = { |
| { I2C_BOARD_INFO("w83l785ts", 0x2d) }, |
| { I2C_BOARD_INFO("w83781d", 0x2d) }, |
| { I2C_BOARD_INFO("adt7473", 0x2e) }, |
| { I2C_BOARD_INFO("f75375", 0x2e) }, |
| { I2C_BOARD_INFO("lm99", 0x4c) }, |
| { } |
| }; |
| |
| nouveau_i2c_identify(dev, "monitoring device", info, |
| probe_monitoring_device, 0x80); //NV_I2C_DEFAULT(0)); |
| } |
| |
| void |
| nouveau_temp_init(struct drm_device *dev) |
| { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nvbios *bios = &dev_priv->vbios; |
| struct bit_entry P; |
| u8 *temp = NULL; |
| |
| if (bios->type == NVBIOS_BIT) { |
| if (bit_table(dev, 'P', &P)) |
| return; |
| |
| if (P.version == 1) |
| temp = ROMPTR(dev, P.data[12]); |
| else if (P.version == 2) |
| temp = ROMPTR(dev, P.data[16]); |
| else |
| NV_WARN(dev, "unknown temp for BIT P %d\n", P.version); |
| |
| nouveau_temp_vbios_parse(dev, temp); |
| } |
| |
| nouveau_temp_probe_i2c(dev); |
| } |
| |
| void |
| nouveau_temp_fini(struct drm_device *dev) |
| { |
| |
| } |