drivers/mtd/devices/Kconfig - kernel/msm-4.9 - Gitiles

 menu "Self-contained MTD device drivers"
 	depends on MTD!=n
 	depends on HAS_IOMEM

 config MTD_PMC551
 	tristate "Ramix PMC551 PCI Mezzanine RAM card support"
 	depends on PCI
 	---help---
 	  This provides a MTD device driver for the Ramix PMC551 RAM PCI card
 	  from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
 	  These devices come in memory configurations from 32M - 1G.  If you
 	  have one, you probably want to enable this.

 	  If this driver is compiled as a module you get the ability to select
 	  the size of the aperture window pointing into the devices memory.
 	  What this means is that if you have a 1G card, normally the kernel
 	  will use a 1G memory map as its view of the device.  As a module,
 	  you can select a 1M window into the memory and the driver will
 	  "slide" the window around the PMC551's memory.  This was
 	  particularly useful on the 2.2 kernels on PPC architectures as there
 	  was limited kernel space to deal with.

 config MTD_PMC551_BUGFIX
 	bool "PMC551 256M DRAM Bugfix"
 	depends on MTD_PMC551
 	help
 	  Some of Ramix's PMC551 boards with 256M configurations have invalid
 	  column and row mux values.  This option will fix them, but will
 	  break other memory configurations.  If unsure say N.

 config MTD_PMC551_DEBUG
 	bool "PMC551 Debugging"
 	depends on MTD_PMC551
 	help
 	  This option makes the PMC551 more verbose during its operation and
 	  is only really useful if you are developing on this driver or
 	  suspect a possible hardware or driver bug.  If unsure say N.

 config MTD_MS02NV
 	tristate "DEC MS02-NV NVRAM module support"
 	depends on MACH_DECSTATION
 	help
 	  This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
 	  backed-up NVRAM module.  The module was originally meant as an NFS
 	  accelerator.  Say Y here if you have a DECstation 5000/2x0 or a
 	  DECsystem 5900 equipped with such a module.

 	  If you want to compile this driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
 	  The module will be called ms02-nv.

 config MTD_DATAFLASH
 	tristate "Support for AT45xxx DataFlash"
 	depends on SPI_MASTER
 	help
 	  This enables access to AT45xxx DataFlash chips, using SPI.
 	  Sometimes DataFlash chips are packaged inside MMC-format
 	  cards; at this writing, the MMC stack won't handle those.

 config MTD_DATAFLASH_WRITE_VERIFY
 	bool "Verify DataFlash page writes"
 	depends on MTD_DATAFLASH
 	help
 	  This adds an extra check when data is written to the flash.
 	  It may help if you are verifying chip setup (timings etc) on
 	  your board.  There is a rare possibility that even though the
 	  device thinks the write was successful, a bit could have been
 	  flipped accidentally due to device wear or something else.

 config MTD_DATAFLASH_OTP
 	bool "DataFlash OTP support (Security Register)"
 	depends on MTD_DATAFLASH
 	help
 	  Newer DataFlash chips (revisions C and D) support 128 bytes of
 	  one-time-programmable (OTP) data.  The first half may be written
 	  (once) with up to 64 bytes of data, such as a serial number or
 	  other key product data.  The second half is programmed with a
 	  unique-to-each-chip bit pattern at the factory.

 config MTD_M25P80
 	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
 	depends on SPI_MASTER
 	help
 	  This enables access to most modern SPI flash chips, used for
 	  program and data storage.   Series supported include Atmel AT26DF,
 	  Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
 	  are supported as well.  See the driver source for the current list,
 	  or to add other chips.

 	  Note that the original DataFlash chips (AT45 series, not AT26DF),
 	  need an entirely different driver.

 	  Set up your spi devices with the right board-specific platform data,
 	  if you want to specify device partitioning or to use a device which
 	  doesn't support the JEDEC ID instruction.

 config M25PXX_USE_FAST_READ
 	bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz"
 	depends on MTD_M25P80
 	default y
 	help
 	  This option enables FAST_READ access supported by ST M25Pxx.

 config MTD_SPEAR_SMI
 	tristate "SPEAR MTD NOR Support through SMI controller"
 	depends on PLAT_SPEAR
 	default y
 	help
 	  This enable SNOR support on SPEAR platforms using SMI controller

 config MTD_SST25L
 	tristate "Support SST25L (non JEDEC) SPI Flash chips"
 	depends on SPI_MASTER
 	help
 	  This enables access to the non JEDEC SST25L SPI flash chips, used
 	  for program and data storage.

 	  Set up your spi devices with the right board-specific platform data,
 	  if you want to specify device partitioning.

 config MTD_BCM47XXSFLASH
 	tristate "R/O support for serial flash on BCMA bus"
 	depends on BCMA_SFLASH
 	help
 	  BCMA bus can have various flash memories attached, they are
 	  registered by bcma as platform devices. This enables driver for
 	  serial flash memories (only read-only mode is implemented).

 config MTD_SLRAM
 	tristate "Uncached system RAM"
 	help
 	  If your CPU cannot cache all of the physical memory in your machine,
 	  you can still use it for storage or swap by using this driver to
 	  present it to the system as a Memory Technology Device.

 config MTD_PHRAM
 	tristate "Physical system RAM"
 	help
 	  This is a re-implementation of the slram driver above.

 	  Use this driver to access physical memory that the kernel proper
 	  doesn't have access to, memory beyond the mem=xxx limit, nvram,
 	  memory on the video card, etc...

 config MTD_LART
 	tristate "28F160xx flash driver for LART"
 	depends on SA1100_LART
 	help
 	  This enables the flash driver for LART. Please note that you do
 	  not need any mapping/chip driver for LART. This one does it all
 	  for you, so go disable all of those if you enabled some of them (:

 config MTD_MTDRAM
 	tristate "Test driver using RAM"
 	help
 	  This enables a test MTD device driver which uses vmalloc() to
 	  provide storage.  You probably want to say 'N' unless you're
 	  testing stuff.

 config MTDRAM_TOTAL_SIZE
 	int "MTDRAM device size in KiB"
 	depends on MTD_MTDRAM
 	default "4096"
 	help
 	  This allows you to configure the total size of the MTD device
 	  emulated by the MTDRAM driver.  If the MTDRAM driver is built
 	  as a module, it is also possible to specify this as a parameter when
 	  loading the module.

 config MTDRAM_ERASE_SIZE
 	int "MTDRAM erase block size in KiB"
 	depends on MTD_MTDRAM
 	default "128"
 	help
 	  This allows you to configure the size of the erase blocks in the
 	  device emulated by the MTDRAM driver.  If the MTDRAM driver is built
 	  as a module, it is also possible to specify this as a parameter when
 	  loading the module.

 #If not a module (I don't want to test it as a module)
 config MTDRAM_ABS_POS
 	hex "SRAM Hexadecimal Absolute position or 0"
 	depends on MTD_MTDRAM=y
 	default "0"
 	help
 	  If you have system RAM accessible by the CPU but not used by Linux
 	  in normal operation, you can give the physical address at which the
 	  available RAM starts, and the MTDRAM driver will use it instead of
 	  allocating space from Linux's available memory. Otherwise, leave
 	  this set to zero. Most people will want to leave this as zero.

 config MTD_BLOCK2MTD
 	tristate "MTD using block device"
 	depends on BLOCK
 	help
 	  This driver allows a block device to appear as an MTD. It would
 	  generally be used in the following cases:

 	  Using Compact Flash as an MTD, these usually present themselves to
 	  the system as an ATA drive.
 	  Testing MTD users (eg JFFS2) on large media and media that might
 	  be removed during a write (using the floppy drive).

 comment "Disk-On-Chip Device Drivers"

 config MTD_DOCG3
 	tristate "M-Systems Disk-On-Chip G3"
 	select BCH
 	select BCH_CONST_PARAMS
 	select BITREVERSE
 	---help---
 	  This provides an MTD device driver for the M-Systems DiskOnChip
 	  G3 devices.

 	  The driver provides access to G3 DiskOnChip, distributed by
 	  M-Systems and now Sandisk. The support is very experimental,
 	  and doesn't give access to any write operations.

 if MTD_DOCG3
 config BCH_CONST_M
 	default 14
 config BCH_CONST_T
 	default 4
 endif

 endmenu
	menu "Self-contained MTD device drivers"
	depends on MTD!=n
	depends on HAS_IOMEM

	config MTD_PMC551
	tristate "Ramix PMC551 PCI Mezzanine RAM card support"
	depends on PCI
	---help---
	This provides a MTD device driver for the Ramix PMC551 RAM PCI card
	from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
	These devices come in memory configurations from 32M - 1G. If you
	have one, you probably want to enable this.

	If this driver is compiled as a module you get the ability to select
	the size of the aperture window pointing into the devices memory.
	What this means is that if you have a 1G card, normally the kernel
	will use a 1G memory map as its view of the device. As a module,
	you can select a 1M window into the memory and the driver will
	"slide" the window around the PMC551's memory. This was
	particularly useful on the 2.2 kernels on PPC architectures as there
	was limited kernel space to deal with.

	config MTD_PMC551_BUGFIX
	bool "PMC551 256M DRAM Bugfix"
	depends on MTD_PMC551
	help
	Some of Ramix's PMC551 boards with 256M configurations have invalid
	column and row mux values. This option will fix them, but will
	break other memory configurations. If unsure say N.

	config MTD_PMC551_DEBUG
	bool "PMC551 Debugging"
	depends on MTD_PMC551
	help
	This option makes the PMC551 more verbose during its operation and
	is only really useful if you are developing on this driver or
	suspect a possible hardware or driver bug. If unsure say N.

	config MTD_MS02NV
	tristate "DEC MS02-NV NVRAM module support"
	depends on MACH_DECSTATION
	help
	This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
	backed-up NVRAM module. The module was originally meant as an NFS
	accelerator. Say Y here if you have a DECstation 5000/2x0 or a
	DECsystem 5900 equipped with such a module.

	If you want to compile this driver as a module ( = code which can be
	inserted in and removed from the running kernel whenever you want),
	say M here and read <file:Documentation/kbuild/modules.txt>.
	The module will be called ms02-nv.

	config MTD_DATAFLASH
	tristate "Support for AT45xxx DataFlash"
	depends on SPI_MASTER
	help
	This enables access to AT45xxx DataFlash chips, using SPI.
	Sometimes DataFlash chips are packaged inside MMC-format
	cards; at this writing, the MMC stack won't handle those.

	config MTD_DATAFLASH_WRITE_VERIFY
	bool "Verify DataFlash page writes"
	depends on MTD_DATAFLASH
	help
	This adds an extra check when data is written to the flash.
	It may help if you are verifying chip setup (timings etc) on
	your board. There is a rare possibility that even though the
	device thinks the write was successful, a bit could have been
	flipped accidentally due to device wear or something else.

	config MTD_DATAFLASH_OTP
	bool "DataFlash OTP support (Security Register)"
	depends on MTD_DATAFLASH
	help
	Newer DataFlash chips (revisions C and D) support 128 bytes of
	one-time-programmable (OTP) data. The first half may be written
	(once) with up to 64 bytes of data, such as a serial number or
	other key product data. The second half is programmed with a
	unique-to-each-chip bit pattern at the factory.

	config MTD_M25P80
	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
	depends on SPI_MASTER
	help
	This enables access to most modern SPI flash chips, used for
	program and data storage. Series supported include Atmel AT26DF,
	Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
	are supported as well. See the driver source for the current list,
	or to add other chips.

	Note that the original DataFlash chips (AT45 series, not AT26DF),
	need an entirely different driver.

	Set up your spi devices with the right board-specific platform data,
	if you want to specify device partitioning or to use a device which
	doesn't support the JEDEC ID instruction.

	config M25PXX_USE_FAST_READ
	bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz"
	depends on MTD_M25P80
	default y
	help
	This option enables FAST_READ access supported by ST M25Pxx.

	config MTD_SPEAR_SMI
	tristate "SPEAR MTD NOR Support through SMI controller"
	depends on PLAT_SPEAR
	default y
	help
	This enable SNOR support on SPEAR platforms using SMI controller

	config MTD_SST25L
	tristate "Support SST25L (non JEDEC) SPI Flash chips"
	depends on SPI_MASTER
	help
	This enables access to the non JEDEC SST25L SPI flash chips, used
	for program and data storage.

	Set up your spi devices with the right board-specific platform data,
	if you want to specify device partitioning.

	config MTD_BCM47XXSFLASH
	tristate "R/O support for serial flash on BCMA bus"
	depends on BCMA_SFLASH
	help
	BCMA bus can have various flash memories attached, they are
	registered by bcma as platform devices. This enables driver for
	serial flash memories (only read-only mode is implemented).

	config MTD_SLRAM
	tristate "Uncached system RAM"
	help
	If your CPU cannot cache all of the physical memory in your machine,
	you can still use it for storage or swap by using this driver to
	present it to the system as a Memory Technology Device.

	config MTD_PHRAM
	tristate "Physical system RAM"
	help
	This is a re-implementation of the slram driver above.

	Use this driver to access physical memory that the kernel proper
	doesn't have access to, memory beyond the mem=xxx limit, nvram,
	memory on the video card, etc...

	config MTD_LART
	tristate "28F160xx flash driver for LART"
	depends on SA1100_LART
	help
	This enables the flash driver for LART. Please note that you do
	not need any mapping/chip driver for LART. This one does it all
	for you, so go disable all of those if you enabled some of them (:

	config MTD_MTDRAM
	tristate "Test driver using RAM"
	help
	This enables a test MTD device driver which uses vmalloc() to
	provide storage. You probably want to say 'N' unless you're
	testing stuff.

	config MTDRAM_TOTAL_SIZE
	int "MTDRAM device size in KiB"
	depends on MTD_MTDRAM
	default "4096"
	help
	This allows you to configure the total size of the MTD device
	emulated by the MTDRAM driver. If the MTDRAM driver is built
	as a module, it is also possible to specify this as a parameter when
	loading the module.

	config MTDRAM_ERASE_SIZE
	int "MTDRAM erase block size in KiB"
	depends on MTD_MTDRAM
	default "128"
	help
	This allows you to configure the size of the erase blocks in the
	device emulated by the MTDRAM driver. If the MTDRAM driver is built
	as a module, it is also possible to specify this as a parameter when
	loading the module.

	#If not a module (I don't want to test it as a module)
	config MTDRAM_ABS_POS
	hex "SRAM Hexadecimal Absolute position or 0"
	depends on MTD_MTDRAM=y
	default "0"
	help
	If you have system RAM accessible by the CPU but not used by Linux
	in normal operation, you can give the physical address at which the
	available RAM starts, and the MTDRAM driver will use it instead of
	allocating space from Linux's available memory. Otherwise, leave
	this set to zero. Most people will want to leave this as zero.

	config MTD_BLOCK2MTD
	tristate "MTD using block device"
	depends on BLOCK
	help
	This driver allows a block device to appear as an MTD. It would
	generally be used in the following cases:

	Using Compact Flash as an MTD, these usually present themselves to
	the system as an ATA drive.
	Testing MTD users (eg JFFS2) on large media and media that might
	be removed during a write (using the floppy drive).

	comment "Disk-On-Chip Device Drivers"

	config MTD_DOCG3
	tristate "M-Systems Disk-On-Chip G3"
	select BCH
	select BCH_CONST_PARAMS
	select BITREVERSE
	---help---
	This provides an MTD device driver for the M-Systems DiskOnChip
	G3 devices.

	The driver provides access to G3 DiskOnChip, distributed by
	M-Systems and now Sandisk. The support is very experimental,
	and doesn't give access to any write operations.

	if MTD_DOCG3
	config BCH_CONST_M
	default 14
	config BCH_CONST_T
	default 4
	endif

	endmenu