| /* Copyright (c) 2017-2018, 2020, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm8909-qrd.dtsi" |
| #include "msm8905.dtsi" |
| #include "msm8905-camera-sensor-skub.dtsi" |
| |
| &soc { |
| matrix_keypad: matrix_keypad@0 { |
| compatible = "gpio-matrix-keypad"; |
| input-name = "matrix_keypad"; |
| debounce-delay-ms = <5>; |
| col-scan-delay-us = <2>; |
| pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend"; |
| pinctrl-0 = <&gpio_key_active>; |
| pinctrl-1 = <&gpio_key_suspend>; |
| |
| row-gpios = <&msm_gpio 97 0 |
| &msm_gpio 96 0 |
| &msm_gpio 95 0 |
| &msm_gpio 94 0>; |
| |
| col-gpios = <&msm_gpio 52 0 |
| &msm_gpio 56 0 |
| &msm_gpio 7 0 |
| &msm_gpio 99 0 |
| &msm_gpio 6 0>; |
| linux,keymap = <0x000000e7 /* (0,0) KEY_DIAL */ |
| 0x00010004 /* (1,0) KEY_3 */ |
| 0x00020007 /* (2,0) KEY_6 */ |
| 0x0003000A /* (3,0) KEY_9 */ |
| 0x0004020b /* (4,0) KEY_NUMERIC_POUND */ |
| |
| 0x01000069 /* (0,1) KEY_LEFT */ |
| 0x01010003 /* (1,1) KEY_2 */ |
| 0x01020006 /* (2,1) KEY_5 */ |
| 0x01030009 /* (3,1) KEY_8 */ |
| 0x0104000b /* (4,1) KEY_0 */ |
| |
| 0x0200008b /* (0,2) KEY_MENU */ |
| 0x02010002 /* (1,2) KEY_1 */ |
| 0x02020005 /* (2,2) KEY_4 */ |
| 0x02030008 /* (3,2) KEY_7 */ |
| 0x0204020a /* (4,2) KEY_NUMERIC_STAR */ |
| |
| 0x03000160 /* (0,3) KEY_OK */ |
| 0x0301006A /* (1,3) KEY_RIGHT */ |
| 0x0302009e>; /* (3,3) KEY_BACK */ |
| |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| pinctrl-names = |
| "tlmm_gpio_key_active","tlmm_gpio_key_suspend"; |
| pinctrl-0 = <&gpio_key_active>; |
| pinctrl-1 = <&gpio_key_suspend>; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&msm_gpio 90 0x1>; |
| linux,input-type = <1>; |
| linux,code = <103>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| }; |
| }; |
| }; |
| |
| &pm8909_chg { |
| status = "ok"; |
| }; |
| |
| &usb_otg { |
| extcon = <&pm8909_chg>; |
| }; |
| &msm_gpio { |
| tlmm_gpio_key { |
| qcom,pin-func = <0>; |
| qcom,num-grp-pins = <5>; |
| label = "tlmm_gpio_key"; |
| gpio_key_active: gpio_key_active { |
| mux { |
| pins = "gpio52", "gpio56", "gpio7", |
| "gpio99", "gpio6"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| gpio_key_suspend: gpio_key_suspend { |
| mux { |
| pins = "gpio52", "gpio56", "gpio7", |
| "gpio99", "gpio6"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| }; |
| }; |
| |
| &spmi_bus { |
| qcom,pm8909@0 { |
| pm8909_pon: qcom,power-on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| interrupts = <0x0 0x8 0x0 0x0>, |
| <0x0 0x8 0x1 0x0>; |
| interrupt-names = "kpdpwr", "resin"; |
| qcom,pon-dbc-delay = <15625>; |
| qcom,system-reset; |
| qcom,clear-warm-reset; |
| |
| qcom,pon_1 { |
| qcom,pon-type = <0>; |
| qcom,pull-up = <1>; |
| linux,code = <116>; |
| }; |
| qcom,pon_2 { |
| qcom,pon-type = <1>; |
| qcom,pull-up = <1>; |
| linux,code = <108>; |
| }; |
| }; |
| }; |
| }; |
| &pm8909_vadc { |
| chan@30 { |
| qcom,scale-function = <6>; |
| }; |
| }; |
| |
| &spmi_bus { |
| qcom,pm8909@0 { |
| qcom,leds@c000 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xc000 0x100>; |
| status = "okay"; |
| qcom,led_gpio_1 { |
| label = "gpio"; |
| linux,name = "button-backlight"; |
| qcom,max-current = <40>; |
| qcom,id = <8>; |
| linux,default-trigger = "none"; |
| qcom,default-state = "on"; |
| qcom,turn-off-delay-ms = <1000>; |
| qcom,source-sel = <1>; |
| qcom,mode-ctrl = <0x10>; |
| qcom,vin-ctrl = <0x02>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm8909_chg { |
| qcom,cool-bat-mv = <4000>; |
| qcom,warm-bat-mv = <4000>; |
| qcom,ibatmax-warm-ma = <500>; |
| qcom,ibatmax-cool-ma = <500>; |
| qcom,batt-hot-percentage = <35>; |
| qcom,batt-cold-percentage = <70>; |
| qcom,chgr-led-support; |
| status = "okay"; |
| }; |
| |
| / { |
| qrd_batterydata: qcom,battery-data { |
| qcom,rpull-up-kohm = <0>; |
| qcom,vref-batt-therm = <1800000>; |
| |
| #include "batterydata-qrd-skub-4v2-2000mah.dtsi" |
| }; |
| }; |
| |
| &pm8909_bms { |
| status = "okay"; |
| qcom,resume-soc = <95>; |
| qcom,use-reported-soc; |
| qcom,force-bms-active-on-charger; |
| qcom,battery-data = <&qrd_batterydata>; |
| }; |
| |
| &sdhc_2 { |
| qcom,nonremovable; |
| interrupts = <0 1>; |
| interrupt-map = <0 &intc 0 125 0 |
| 1 &intc 0 221 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| /delete-property/ cd-gpios; |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| }; |
| |
| &pm8909_mpps { |
| mpp@a300 { /* MPP 4 */ |
| /* CASE_THERM config */ |
| qcom,mode = <4>; /* AIN input */ |
| qcom,invert = <1>; /* Enable MPP */ |
| qcom,ain-route = <3>; /* AMUX 8 */ |
| qcom,master-en = <1>; |
| qcom,src-sel = <0>; /* Function constant */ |
| }; |
| }; |
| |
| &pm8909_vadc { |
| chan@30 { |
| qcom,scale-function = <12>; |
| }; |
| |
| chan@13 { |
| label = "case_therm"; |
| reg = <0x13>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| /*qcom,vadc-thermal-node;*/ |
| }; |
| }; |
| |
| &soc { |
| qcom,msm-audio-apr { |
| compatible = "qcom,msm-audio-apr"; |
| msm_audio_apr_dummy { |
| compatible = "qcom,msm-audio-apr-dummy"; |
| }; |
| }; |
| |
| sound { |
| compatible = "qcom,msm8952-audio-codec"; |
| qcom,model = "msm8909-skub-snd-card"; |
| reg = <0x7702000 0x4>, |
| <0x7702004 0x4>, |
| <0x7702008 0x4>; |
| reg-names = "csr_gp_io_mux_mic_ctl", |
| "csr_gp_io_mux_spkr_ctl", |
| "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel"; |
| qcom,msm-snd-card-id = <0>; |
| qcom,msm-codec-type = "internal"; |
| qcom,msm-ext-pa = "primary"; |
| qcom,msm-mclk-freq = <9600000>; |
| qcom,msm-mbhc-hphl-swh = <1>; |
| qcom,msm-mbhc-gnd-swh = <0>; |
| qcom,msm-hs-micbias-type = "internal"; |
| qcom,msm-micbias1-ext-cap; |
| qcom,msm-micbias2-ext-cap; |
| qcom,audio-routing = |
| "RX_BIAS", "MCLK", |
| "SPK_RX_BIAS", "MCLK", |
| "INT_LDO_H", "MCLK", |
| "MIC BIAS Internal1", "Handset Mic", |
| "MIC BIAS Internal2", "Headset Mic", |
| "AMIC1", "MIC BIAS Internal1", |
| "AMIC2", "MIC BIAS Internal2"; |
| |
| qcom,pri-mi2s-gpios = <&cdc_pri_mi2s_gpios>; |
| |
| asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, |
| <&voip>, <&voice>, |
| <&loopback>, <&compress>, <&hostless>, |
| <&afe>, <&lsm>, <&routing>, <&pcm_noirq>; |
| asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1", |
| "msm-pcm-dsp.2", |
| "msm-voip-dsp", "msm-pcm-voice", |
| "msm-pcm-loopback", "msm-compress-dsp", |
| "msm-pcm-hostless", "msm-pcm-afe", |
| "msm-lsm-client", "msm-pcm-routing", |
| "msm-pcm-dsp-noirq"; |
| asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>, |
| <&dai_mi2s0>, <&dai_mi2s1>, |
| <&dai_mi2s2>, <&dai_mi2s3>, |
| <&dai_mi2s4>, <&dai_mi2s5>, |
| <&sb_0_rx>, <&sb_0_tx>, |
| <&sb_1_rx>, <&sb_1_tx>, |
| <&sb_3_rx>, <&sb_3_tx>, |
| <&sb_4_rx>, <&sb_4_tx>, |
| <&bt_sco_rx>, <&bt_sco_tx>, |
| <&bt_a2dp_rx>, <&int_fm_rx>, <&int_fm_tx>, |
| <&afe_pcm_rx>, <&afe_pcm_tx>, |
| <&afe_proxy_rx>, <&afe_proxy_tx>, |
| <&incall_record_rx>, <&incall_record_tx>, |
| <&incall_music_rx>, <&incall_music_2_rx>; |
| asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8", |
| "msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1", |
| "msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3", |
| "msm-dai-q6-mi2s.4", "msm-dai-q6-mi2s.6", |
| "msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385", |
| "msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387", |
| "msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391", |
| "msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393", |
| "msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289", |
| "msm-dai-q6-dev.12290", |
| "msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293", |
| "msm-dai-q6-dev.224", "msm-dai-q6-dev.225", |
| "msm-dai-q6-dev.241", "msm-dai-q6-dev.240", |
| "msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772", |
| "msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770"; |
| asoc-codec = <&stub_codec>, <&msm_digital_codec>, |
| <&pmic_analog_codec>; |
| asoc-codec-names = "msm-stub-codec.1", "msm-dig-codec", |
| "analog-codec"; |
| }; |
| |
| cdc_pri_mi2s_gpios: msm_cdc_pinctrl_pri { |
| compatible = "qcom,msm-cdc-pinctrl"; |
| pinctrl-names = "aud_active", "aud_sleep"; |
| pinctrl-0 = <&cdc_pdm_lines_act>; |
| pinctrl-1 = <&cdc_pdm_lines_sus>; |
| }; |
| |
| spi@78b9000 { /* BLSP1 QUP5 */ |
| status = "okay"; |
| qcom,shared; |
| mdss_spi_client { |
| reg = <0>; |
| compatible = "qcom,mdss-spi-client"; |
| label = "MDSS SPI QUP5 CLIENT"; |
| spi-max-frequency = <50000000>; |
| }; |
| }; |
| i2c@78b9000 {/* BLSP1 QUP5 */ |
| status = "disabled"; |
| }; |
| |
| mdss_spi: qcom,mdss_spi { |
| compatible = "qcom,mdss-spi-display"; |
| label = "mdss spi panel"; |
| |
| qcom,mdss-fb-map = <&mdss_fb0>; |
| qcom,mdss-mdp = <&mdss_mdp>; |
| vdd-supply = <&pm8909_l17>; |
| vddio-supply = <&pm8909_l6>; |
| |
| qcom,panel-supply-entries { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qcom,panel-supply-entry@0 { |
| reg = <0>; |
| qcom,supply-name = "vdd"; |
| qcom,supply-min-voltage = <2850000>; |
| qcom,supply-max-voltage = <2850000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| }; |
| |
| qcom,panel-supply-entry@1 { |
| reg = <1>; |
| qcom,supply-name = "vddio"; |
| qcom,supply-min-voltage = <1800000>; |
| qcom,supply-max-voltage = <1800000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm8909_1 { |
| pmic_analog_codec: analog-codec@f100 { |
| status = "okay"; |
| compatible = "qcom,pmic-analog-codec"; |
| reg = <0xf000 0x200>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-parent = <&spmi_bus>; |
| interrupts = |
| <0x1 0xf0 0x0 IRQ_TYPE_NONE>, |
| <0x1 0xf0 0x1 IRQ_TYPE_NONE>, |
| <0x1 0xf0 0x2 IRQ_TYPE_NONE>, |
| <0x1 0xf0 0x3 IRQ_TYPE_NONE>, |
| <0x1 0xf0 0x4 IRQ_TYPE_NONE>, |
| <0x1 0xf0 0x5 IRQ_TYPE_NONE>, |
| <0x1 0xf0 0x6 IRQ_TYPE_NONE>, |
| <0x1 0xf0 0x7 IRQ_TYPE_NONE>, |
| <0x1 0xf1 0x0 IRQ_TYPE_NONE>, |
| <0x1 0xf1 0x1 IRQ_TYPE_NONE>, |
| <0x1 0xf1 0x2 IRQ_TYPE_NONE>, |
| <0x1 0xf1 0x3 IRQ_TYPE_NONE>, |
| <0x1 0xf1 0x4 IRQ_TYPE_NONE>, |
| <0x1 0xf1 0x5 IRQ_TYPE_NONE>; |
| interrupt-names = |
| "spk_cnp_int", |
| "spk_clip_int", |
| "spk_ocp_int", |
| "ins_rem_det1", |
| "but_rel_det", |
| "but_press_det", |
| "ins_rem_det", |
| "mbhc_int", |
| "ear_ocp_int", |
| "hphr_ocp_int", |
| "hphl_ocp_det", |
| "ear_cnp_int", |
| "hphr_cnp_int", |
| "hphl_cnp_int"; |
| |
| cdc-vdda-cp-supply = <&pm8909_s2>; |
| qcom,cdc-vdda-cp-voltage = <1800000 2200000>; |
| qcom,cdc-vdda-cp-current = <500000>; |
| |
| cdc-vdda-h-supply = <&pm8909_l5>; |
| qcom,cdc-vdda-h-voltage = <1800000 1800000>; |
| qcom,cdc-vdda-h-current = <5000>; |
| |
| cdc-vdd-px-supply = <&pm8909_l5>; |
| qcom,cdc-vdd-px-voltage = <1800000 1800000>; |
| qcom,cdc-vdd-px-current = <5000>; |
| |
| cdc-vdd-pa-supply = <&pm8909_s2>; |
| qcom,cdc-vdd-pa-voltage = <1800000 2200000>; |
| qcom,cdc-vdd-pa-current = <260000>; |
| |
| cdc-vdd-mic-bias-supply = <&pm8909_l13>; |
| qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>; |
| qcom,cdc-vdd-mic-bias-current = <5000>; |
| |
| qcom,cdc-mclk-clk-rate = <9600000>; |
| |
| qcom,cdc-static-supplies = |
| "cdc-vdda-h", |
| "cdc-vdd-px", |
| "cdc-vdd-pa", |
| "cdc-vdda-cp"; |
| |
| qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias"; |
| |
| msm_digital_codec: msm-dig-codec@f000 { |
| compatible = "qcom,msm-digital-codec"; |
| reg = <0x771c000 0x100>; |
| }; |
| }; |
| }; |
| |
| &pm8909_mpps { |
| mpp@a100 { /* MPP 2 */ |
| /* Backlight PWM */ |
| qcom,mode = <1>; /* Digital output */ |
| qcom,invert = <0>; /* Disable invert */ |
| qcom,src-sel = <4>; /* DTEST1 */ |
| qcom,vin-sel = <0>; /* VPH_PWR */ |
| qcom,master-en = <1>; /* Enable MPP */ |
| }; |
| }; |
| |
| #include "spi-panel-gc9305-qvga-cmd.dtsi" |
| |
| &mdss_mdp { |
| qcom,mdss-pref-prim-intf = "spi"; |
| }; |
| |
| &spi_gc9305_qvga_cmd { |
| qcom,mdss-spi-bl-pmic-control-type = "bl_ctrl_pwm"; |
| qcom,mdss-spi-bl-pmic-pwm-frequency = <100>; |
| qcom,mdss-spi-bl-pmic-bank-select = <0>; |
| qcom,mdss-spi-pwm-gpio = <&pm8909_mpps 2 0>; |
| qcom,cont-splash-enabled; |
| }; |
| |
| &msm_gpio { |
| pmx_mdss_te { |
| mdss_te_active: mdss_te_active { |
| mux { |
| pins = "gpio24"; |
| }; |
| config { |
| pins = "gpio24"; |
| }; |
| }; |
| mdss_te_suspend: mdss_te_suspend { |
| mux { |
| pins = "gpio24"; |
| }; |
| config { |
| pins = "gpio24"; |
| }; |
| }; |
| }; |
| }; |
| |
| &mdss_spi { |
| qcom,spi-pref-prim-pan = <&spi_gc9305_qvga_cmd>; |
| pinctrl-names = "mdss_default", "mdss_sleep"; |
| pinctrl-0 = <&mdss_te_active>; |
| pinctrl-1 = <&mdss_te_suspend>; |
| |
| qcom,platform-te-gpio = <&msm_gpio 24 0>; |
| qcom,platform-reset-gpio = <&msm_gpio 25 0>; |
| qcom,platform-spi-dc-gpio = <&msm_gpio 110 0>; |
| |
| vdd-supply = <&pm8909_l17>; |
| vddio-supply = <&pm8909_l6>; |
| }; |
| |
| &pm8909_gpios { |
| /* GPIO 2 (NFC_CLK_REQ) */ |
| nfc-clk { |
| nfc_clk_default: nfc_clk_default { |
| pins = "gpio2"; |
| function = "normal"; |
| input-enable; |
| power-source = <1>; |
| }; |
| }; |
| |
| /* GPIO 4 (FLASH ENABLE GPIO CONFIG) */ |
| flash_en { |
| flash_en_default: flash_en_default{ |
| pins = "gpio4"; |
| function = "normal"; |
| input-disable; |
| output-enable; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| &i2c_2 { |
| status = "okay"; |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&msm_gpio 21 0x00>; |
| qcom,nq-ven = <&msm_gpio 20 0x00>; |
| qcom,nq-firm = <&msm_gpio 23 0x00>; |
| qcom,nq-clkreq = <&pm8909_gpios 2 0x00>; |
| qcom,nq-esepwr = <&msm_gpio 31 0x00>; |
| interrupt-parent = <&msm_gpio>; |
| qcom,clk-src = "BBCLK2"; |
| interrupts = <21 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active", "nfc_suspend"; |
| pinctrl-0 = <&nfc_int_active &nfc_disable_active |
| &nfc_clk_default>; |
| pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>; |
| clocks = <&clock_rpm clk_bb_clk2_pin>; |
| clock-names = "ref_clk"; |
| }; |
| }; |
| |
| &vendor_fstab { |
| status = "disabled"; |
| }; |
| |
| &system_fstab { |
| status = "disabled"; |
| }; |
| |
| &blsp1_uart1 { |
| status = "ok"; |
| }; |
| |
| &blsp1_uart2 { |
| status = "ok"; |
| }; |
| |
| &actuator0 { |
| status = "disabled"; |
| }; |
| |
| &pm8909_conga_dig { |
| status = "disabled"; |
| }; |
| |
| &pm8909_conga_analog { |
| status = "disabled"; |
| }; |
| |
| &mdss_dsi { |
| vdda-supply = <&pm8909_l2>; |
| vddio-supply = <&pm8909_l6>; |
| qcom,mdss_dsi_ctrl0@1ac8000 { |
| vdd-supply = <&pm8909_l17>; |
| vddio-supply = <&pm8909_l6>; |
| }; |
| }; |