| /* |
| * INET 802.1Q VLAN |
| * Ethernet-type device handling. |
| * |
| * Authors: Ben Greear <greearb@candelatech.com> |
| * Please send support related email to: vlan@scry.wanfear.com |
| * VLAN Home Page: http://www.candelatech.com/~greear/vlan.html |
| * |
| * Fixes: |
| * Fix for packet capture - Nick Eggleston <nick@dccinc.com>; |
| * Add HW acceleration hooks - David S. Miller <davem@redhat.com>; |
| * Correct all the locking - David S. Miller <davem@redhat.com>; |
| * Use hash table for VLAN groups - David S. Miller <davem@redhat.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <asm/uaccess.h> /* for copy_from_user */ |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <net/datalink.h> |
| #include <linux/mm.h> |
| #include <linux/in.h> |
| #include <linux/init.h> |
| #include <net/p8022.h> |
| #include <net/arp.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/notifier.h> |
| |
| #include <linux/if_vlan.h> |
| #include "vlan.h" |
| #include "vlanproc.h" |
| |
| #define DRV_VERSION "1.8" |
| |
| /* Global VLAN variables */ |
| |
| /* Our listing of VLAN group(s) */ |
| static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE]; |
| #define vlan_grp_hashfn(IDX) ((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK) |
| |
| static char vlan_fullname[] = "802.1Q VLAN Support"; |
| static char vlan_version[] = DRV_VERSION; |
| static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>"; |
| static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>"; |
| |
| static int vlan_device_event(struct notifier_block *, unsigned long, void *); |
| static int vlan_ioctl_handler(void __user *); |
| static int unregister_vlan_dev(struct net_device *, unsigned short ); |
| |
| static struct notifier_block vlan_notifier_block = { |
| .notifier_call = vlan_device_event, |
| }; |
| |
| /* These may be changed at run-time through IOCTLs */ |
| |
| /* Determines interface naming scheme. */ |
| unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD; |
| |
| static struct packet_type vlan_packet_type = { |
| .type = __constant_htons(ETH_P_8021Q), |
| .func = vlan_skb_recv, /* VLAN receive method */ |
| }; |
| |
| /* Bits of netdev state that are propagated from real device to virtual */ |
| #define VLAN_LINK_STATE_MASK \ |
| ((1<<__LINK_STATE_PRESENT)|(1<<__LINK_STATE_NOCARRIER)) |
| |
| /* End of global variables definitions. */ |
| |
| /* |
| * Function vlan_proto_init (pro) |
| * |
| * Initialize VLAN protocol layer, |
| * |
| */ |
| static int __init vlan_proto_init(void) |
| { |
| int err; |
| |
| printk(VLAN_INF "%s v%s %s\n", |
| vlan_fullname, vlan_version, vlan_copyright); |
| printk(VLAN_INF "All bugs added by %s\n", |
| vlan_buggyright); |
| |
| /* proc file system initialization */ |
| err = vlan_proc_init(); |
| if (err < 0) { |
| printk(KERN_ERR |
| "%s %s: can't create entry in proc filesystem!\n", |
| __FUNCTION__, VLAN_NAME); |
| return err; |
| } |
| |
| dev_add_pack(&vlan_packet_type); |
| |
| /* Register us to receive netdevice events */ |
| err = register_netdevice_notifier(&vlan_notifier_block); |
| if (err < 0) { |
| dev_remove_pack(&vlan_packet_type); |
| vlan_proc_cleanup(); |
| return err; |
| } |
| |
| vlan_ioctl_set(vlan_ioctl_handler); |
| |
| return 0; |
| } |
| |
| /* Cleanup all vlan devices |
| * Note: devices that have been registered that but not |
| * brought up will exist but have no module ref count. |
| */ |
| static void __exit vlan_cleanup_devices(void) |
| { |
| struct net_device *dev, *nxt; |
| |
| rtnl_lock(); |
| for (dev = dev_base; dev; dev = nxt) { |
| nxt = dev->next; |
| if (dev->priv_flags & IFF_802_1Q_VLAN) { |
| unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, |
| VLAN_DEV_INFO(dev)->vlan_id); |
| |
| unregister_netdevice(dev); |
| } |
| } |
| rtnl_unlock(); |
| } |
| |
| /* |
| * Module 'remove' entry point. |
| * o delete /proc/net/router directory and static entries. |
| */ |
| static void __exit vlan_cleanup_module(void) |
| { |
| int i; |
| |
| vlan_ioctl_set(NULL); |
| |
| /* Un-register us from receiving netdevice events */ |
| unregister_netdevice_notifier(&vlan_notifier_block); |
| |
| dev_remove_pack(&vlan_packet_type); |
| vlan_cleanup_devices(); |
| |
| /* This table must be empty if there are no module |
| * references left. |
| */ |
| for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) { |
| BUG_ON(!hlist_empty(&vlan_group_hash[i])); |
| } |
| vlan_proc_cleanup(); |
| |
| synchronize_net(); |
| } |
| |
| module_init(vlan_proto_init); |
| module_exit(vlan_cleanup_module); |
| |
| /* Must be invoked with RCU read lock (no preempt) */ |
| static struct vlan_group *__vlan_find_group(int real_dev_ifindex) |
| { |
| struct vlan_group *grp; |
| struct hlist_node *n; |
| int hash = vlan_grp_hashfn(real_dev_ifindex); |
| |
| hlist_for_each_entry_rcu(grp, n, &vlan_group_hash[hash], hlist) { |
| if (grp->real_dev_ifindex == real_dev_ifindex) |
| return grp; |
| } |
| |
| return NULL; |
| } |
| |
| /* Find the protocol handler. Assumes VID < VLAN_VID_MASK. |
| * |
| * Must be invoked with RCU read lock (no preempt) |
| */ |
| struct net_device *__find_vlan_dev(struct net_device *real_dev, |
| unsigned short VID) |
| { |
| struct vlan_group *grp = __vlan_find_group(real_dev->ifindex); |
| |
| if (grp) |
| return grp->vlan_devices[VID]; |
| |
| return NULL; |
| } |
| |
| static void vlan_rcu_free(struct rcu_head *rcu) |
| { |
| kfree(container_of(rcu, struct vlan_group, rcu)); |
| } |
| |
| |
| /* This returns 0 if everything went fine. |
| * It will return 1 if the group was killed as a result. |
| * A negative return indicates failure. |
| * |
| * The RTNL lock must be held. |
| */ |
| static int unregister_vlan_dev(struct net_device *real_dev, |
| unsigned short vlan_id) |
| { |
| struct net_device *dev = NULL; |
| int real_dev_ifindex = real_dev->ifindex; |
| struct vlan_group *grp; |
| int i, ret; |
| |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id); |
| #endif |
| |
| /* sanity check */ |
| if (vlan_id >= VLAN_VID_MASK) |
| return -EINVAL; |
| |
| ASSERT_RTNL(); |
| grp = __vlan_find_group(real_dev_ifindex); |
| |
| ret = 0; |
| |
| if (grp) { |
| dev = grp->vlan_devices[vlan_id]; |
| if (dev) { |
| /* Remove proc entry */ |
| vlan_proc_rem_dev(dev); |
| |
| /* Take it out of our own structures, but be sure to |
| * interlock with HW accelerating devices or SW vlan |
| * input packet processing. |
| */ |
| if (real_dev->features & |
| (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER)) { |
| real_dev->vlan_rx_kill_vid(real_dev, vlan_id); |
| } |
| |
| grp->vlan_devices[vlan_id] = NULL; |
| synchronize_net(); |
| |
| |
| /* Caller unregisters (and if necessary, puts) |
| * VLAN device, but we get rid of the reference to |
| * real_dev here. |
| */ |
| dev_put(real_dev); |
| |
| /* If the group is now empty, kill off the |
| * group. |
| */ |
| for (i = 0; i < VLAN_VID_MASK; i++) |
| if (grp->vlan_devices[i]) |
| break; |
| |
| if (i == VLAN_VID_MASK) { |
| if (real_dev->features & NETIF_F_HW_VLAN_RX) |
| real_dev->vlan_rx_register(real_dev, NULL); |
| |
| hlist_del_rcu(&grp->hlist); |
| |
| /* Free the group, after all cpu's are done. */ |
| call_rcu(&grp->rcu, vlan_rcu_free); |
| |
| grp = NULL; |
| ret = 1; |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int unregister_vlan_device(const char *vlan_IF_name) |
| { |
| struct net_device *dev = NULL; |
| int ret; |
| |
| |
| dev = dev_get_by_name(vlan_IF_name); |
| ret = -EINVAL; |
| if (dev) { |
| if (dev->priv_flags & IFF_802_1Q_VLAN) { |
| rtnl_lock(); |
| |
| ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, |
| VLAN_DEV_INFO(dev)->vlan_id); |
| |
| dev_put(dev); |
| unregister_netdevice(dev); |
| |
| rtnl_unlock(); |
| |
| if (ret == 1) |
| ret = 0; |
| } else { |
| printk(VLAN_ERR |
| "%s: ERROR: Tried to remove a non-vlan device " |
| "with VLAN code, name: %s priv_flags: %hX\n", |
| __FUNCTION__, dev->name, dev->priv_flags); |
| dev_put(dev); |
| ret = -EPERM; |
| } |
| } else { |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__); |
| #endif |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static void vlan_setup(struct net_device *new_dev) |
| { |
| SET_MODULE_OWNER(new_dev); |
| |
| /* new_dev->ifindex = 0; it will be set when added to |
| * the global list. |
| * iflink is set as well. |
| */ |
| new_dev->get_stats = vlan_dev_get_stats; |
| |
| /* Make this thing known as a VLAN device */ |
| new_dev->priv_flags |= IFF_802_1Q_VLAN; |
| |
| /* Set us up to have no queue, as the underlying Hardware device |
| * can do all the queueing we could want. |
| */ |
| new_dev->tx_queue_len = 0; |
| |
| /* set up method calls */ |
| new_dev->change_mtu = vlan_dev_change_mtu; |
| new_dev->open = vlan_dev_open; |
| new_dev->stop = vlan_dev_stop; |
| new_dev->set_mac_address = vlan_dev_set_mac_address; |
| new_dev->set_multicast_list = vlan_dev_set_multicast_list; |
| new_dev->destructor = free_netdev; |
| new_dev->do_ioctl = vlan_dev_ioctl; |
| } |
| |
| /* Attach a VLAN device to a mac address (ie Ethernet Card). |
| * Returns the device that was created, or NULL if there was |
| * an error of some kind. |
| */ |
| static struct net_device *register_vlan_device(const char *eth_IF_name, |
| unsigned short VLAN_ID) |
| { |
| struct vlan_group *grp; |
| struct net_device *new_dev; |
| struct net_device *real_dev; /* the ethernet device */ |
| char name[IFNAMSIZ]; |
| |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "%s: if_name -:%s:- vid: %i\n", |
| __FUNCTION__, eth_IF_name, VLAN_ID); |
| #endif |
| |
| if (VLAN_ID >= VLAN_VID_MASK) |
| goto out_ret_null; |
| |
| /* find the device relating to eth_IF_name. */ |
| real_dev = dev_get_by_name(eth_IF_name); |
| if (!real_dev) |
| goto out_ret_null; |
| |
| if (real_dev->features & NETIF_F_VLAN_CHALLENGED) { |
| printk(VLAN_DBG "%s: VLANs not supported on %s.\n", |
| __FUNCTION__, real_dev->name); |
| goto out_put_dev; |
| } |
| |
| if ((real_dev->features & NETIF_F_HW_VLAN_RX) && |
| (real_dev->vlan_rx_register == NULL || |
| real_dev->vlan_rx_kill_vid == NULL)) { |
| printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", |
| __FUNCTION__, real_dev->name); |
| goto out_put_dev; |
| } |
| |
| if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) && |
| (real_dev->vlan_rx_add_vid == NULL || |
| real_dev->vlan_rx_kill_vid == NULL)) { |
| printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", |
| __FUNCTION__, real_dev->name); |
| goto out_put_dev; |
| } |
| |
| /* From this point on, all the data structures must remain |
| * consistent. |
| */ |
| rtnl_lock(); |
| |
| /* The real device must be up and operating in order to |
| * assosciate a VLAN device with it. |
| */ |
| if (!(real_dev->flags & IFF_UP)) |
| goto out_unlock; |
| |
| if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) { |
| /* was already registered. */ |
| printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__); |
| goto out_unlock; |
| } |
| |
| /* Gotta set up the fields for the device. */ |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n", |
| vlan_name_type); |
| #endif |
| switch (vlan_name_type) { |
| case VLAN_NAME_TYPE_RAW_PLUS_VID: |
| /* name will look like: eth1.0005 */ |
| snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, VLAN_ID); |
| break; |
| case VLAN_NAME_TYPE_PLUS_VID_NO_PAD: |
| /* Put our vlan.VID in the name. |
| * Name will look like: vlan5 |
| */ |
| snprintf(name, IFNAMSIZ, "vlan%i", VLAN_ID); |
| break; |
| case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD: |
| /* Put our vlan.VID in the name. |
| * Name will look like: eth0.5 |
| */ |
| snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, VLAN_ID); |
| break; |
| case VLAN_NAME_TYPE_PLUS_VID: |
| /* Put our vlan.VID in the name. |
| * Name will look like: vlan0005 |
| */ |
| default: |
| snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID); |
| }; |
| |
| new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name, |
| vlan_setup); |
| if (new_dev == NULL) |
| goto out_unlock; |
| |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name); |
| #endif |
| /* IFF_BROADCAST|IFF_MULTICAST; ??? */ |
| new_dev->flags = real_dev->flags; |
| new_dev->flags &= ~IFF_UP; |
| |
| new_dev->state = real_dev->state & VLAN_LINK_STATE_MASK; |
| |
| /* need 4 bytes for extra VLAN header info, |
| * hope the underlying device can handle it. |
| */ |
| new_dev->mtu = real_dev->mtu; |
| |
| /* TODO: maybe just assign it to be ETHERNET? */ |
| new_dev->type = real_dev->type; |
| |
| new_dev->hard_header_len = real_dev->hard_header_len; |
| if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) { |
| /* Regular ethernet + 4 bytes (18 total). */ |
| new_dev->hard_header_len += VLAN_HLEN; |
| } |
| |
| VLAN_MEM_DBG("new_dev->priv malloc, addr: %p size: %i\n", |
| new_dev->priv, |
| sizeof(struct vlan_dev_info)); |
| |
| memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len); |
| memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len); |
| new_dev->addr_len = real_dev->addr_len; |
| |
| if (real_dev->features & NETIF_F_HW_VLAN_TX) { |
| new_dev->hard_header = real_dev->hard_header; |
| new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit; |
| new_dev->rebuild_header = real_dev->rebuild_header; |
| } else { |
| new_dev->hard_header = vlan_dev_hard_header; |
| new_dev->hard_start_xmit = vlan_dev_hard_start_xmit; |
| new_dev->rebuild_header = vlan_dev_rebuild_header; |
| } |
| new_dev->hard_header_parse = real_dev->hard_header_parse; |
| |
| VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */ |
| VLAN_DEV_INFO(new_dev)->real_dev = real_dev; |
| VLAN_DEV_INFO(new_dev)->dent = NULL; |
| VLAN_DEV_INFO(new_dev)->flags = 1; |
| |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "About to go find the group for idx: %i\n", |
| real_dev->ifindex); |
| #endif |
| |
| if (register_netdevice(new_dev)) |
| goto out_free_newdev; |
| |
| /* So, got the sucker initialized, now lets place |
| * it into our local structure. |
| */ |
| grp = __vlan_find_group(real_dev->ifindex); |
| |
| /* Note, we are running under the RTNL semaphore |
| * so it cannot "appear" on us. |
| */ |
| if (!grp) { /* need to add a new group */ |
| grp = kmalloc(sizeof(struct vlan_group), GFP_KERNEL); |
| if (!grp) |
| goto out_free_unregister; |
| |
| /* printk(KERN_ALERT "VLAN REGISTER: Allocated new group.\n"); */ |
| memset(grp, 0, sizeof(struct vlan_group)); |
| grp->real_dev_ifindex = real_dev->ifindex; |
| |
| hlist_add_head_rcu(&grp->hlist, |
| &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]); |
| |
| if (real_dev->features & NETIF_F_HW_VLAN_RX) |
| real_dev->vlan_rx_register(real_dev, grp); |
| } |
| |
| grp->vlan_devices[VLAN_ID] = new_dev; |
| |
| if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */ |
| printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n", |
| new_dev->name); |
| |
| if (real_dev->features & NETIF_F_HW_VLAN_FILTER) |
| real_dev->vlan_rx_add_vid(real_dev, VLAN_ID); |
| |
| rtnl_unlock(); |
| |
| |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "Allocated new device successfully, returning.\n"); |
| #endif |
| return new_dev; |
| |
| out_free_unregister: |
| unregister_netdev(new_dev); |
| goto out_unlock; |
| |
| out_free_newdev: |
| free_netdev(new_dev); |
| |
| out_unlock: |
| rtnl_unlock(); |
| |
| out_put_dev: |
| dev_put(real_dev); |
| |
| out_ret_null: |
| return NULL; |
| } |
| |
| static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr) |
| { |
| struct net_device *dev = ptr; |
| struct vlan_group *grp = __vlan_find_group(dev->ifindex); |
| int i, flgs; |
| struct net_device *vlandev; |
| |
| if (!grp) |
| goto out; |
| |
| /* It is OK that we do not hold the group lock right now, |
| * as we run under the RTNL lock. |
| */ |
| |
| switch (event) { |
| case NETDEV_CHANGE: |
| /* Propagate real device state to vlan devices */ |
| flgs = dev->state & VLAN_LINK_STATE_MASK; |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
| vlandev = grp->vlan_devices[i]; |
| if (!vlandev) |
| continue; |
| |
| if (netif_carrier_ok(dev)) { |
| if (!netif_carrier_ok(vlandev)) |
| netif_carrier_on(vlandev); |
| } else { |
| if (netif_carrier_ok(vlandev)) |
| netif_carrier_off(vlandev); |
| } |
| |
| if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) { |
| vlandev->state = (vlandev->state &~ VLAN_LINK_STATE_MASK) |
| | flgs; |
| netdev_state_change(vlandev); |
| } |
| } |
| break; |
| |
| case NETDEV_DOWN: |
| /* Put all VLANs for this dev in the down state too. */ |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
| vlandev = grp->vlan_devices[i]; |
| if (!vlandev) |
| continue; |
| |
| flgs = vlandev->flags; |
| if (!(flgs & IFF_UP)) |
| continue; |
| |
| dev_change_flags(vlandev, flgs & ~IFF_UP); |
| } |
| break; |
| |
| case NETDEV_UP: |
| /* Put all VLANs for this dev in the up state too. */ |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
| vlandev = grp->vlan_devices[i]; |
| if (!vlandev) |
| continue; |
| |
| flgs = vlandev->flags; |
| if (flgs & IFF_UP) |
| continue; |
| |
| dev_change_flags(vlandev, flgs | IFF_UP); |
| } |
| break; |
| |
| case NETDEV_UNREGISTER: |
| /* Delete all VLANs for this dev. */ |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
| int ret; |
| |
| vlandev = grp->vlan_devices[i]; |
| if (!vlandev) |
| continue; |
| |
| ret = unregister_vlan_dev(dev, |
| VLAN_DEV_INFO(vlandev)->vlan_id); |
| |
| unregister_netdevice(vlandev); |
| |
| /* Group was destroyed? */ |
| if (ret == 1) |
| break; |
| } |
| break; |
| }; |
| |
| out: |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * VLAN IOCTL handler. |
| * o execute requested action or pass command to the device driver |
| * arg is really a struct vlan_ioctl_args __user *. |
| */ |
| static int vlan_ioctl_handler(void __user *arg) |
| { |
| int err = 0; |
| unsigned short vid = 0; |
| struct vlan_ioctl_args args; |
| |
| if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args))) |
| return -EFAULT; |
| |
| /* Null terminate this sucker, just in case. */ |
| args.device1[23] = 0; |
| args.u.device2[23] = 0; |
| |
| #ifdef VLAN_DEBUG |
| printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd); |
| #endif |
| |
| switch (args.cmd) { |
| case SET_VLAN_INGRESS_PRIORITY_CMD: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| err = vlan_dev_set_ingress_priority(args.device1, |
| args.u.skb_priority, |
| args.vlan_qos); |
| break; |
| |
| case SET_VLAN_EGRESS_PRIORITY_CMD: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| err = vlan_dev_set_egress_priority(args.device1, |
| args.u.skb_priority, |
| args.vlan_qos); |
| break; |
| |
| case SET_VLAN_FLAG_CMD: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| err = vlan_dev_set_vlan_flag(args.device1, |
| args.u.flag, |
| args.vlan_qos); |
| break; |
| |
| case SET_VLAN_NAME_TYPE_CMD: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if ((args.u.name_type >= 0) && |
| (args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) { |
| vlan_name_type = args.u.name_type; |
| err = 0; |
| } else { |
| err = -EINVAL; |
| } |
| break; |
| |
| case ADD_VLAN_CMD: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| /* we have been given the name of the Ethernet Device we want to |
| * talk to: args.dev1 We also have the |
| * VLAN ID: args.u.VID |
| */ |
| if (register_vlan_device(args.device1, args.u.VID)) { |
| err = 0; |
| } else { |
| err = -EINVAL; |
| } |
| break; |
| |
| case DEL_VLAN_CMD: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| /* Here, the args.dev1 is the actual VLAN we want |
| * to get rid of. |
| */ |
| err = unregister_vlan_device(args.device1); |
| break; |
| |
| case GET_VLAN_INGRESS_PRIORITY_CMD: |
| /* TODO: Implement |
| err = vlan_dev_get_ingress_priority(args); |
| if (copy_to_user((void*)arg, &args, |
| sizeof(struct vlan_ioctl_args))) { |
| err = -EFAULT; |
| } |
| */ |
| err = -EINVAL; |
| break; |
| case GET_VLAN_EGRESS_PRIORITY_CMD: |
| /* TODO: Implement |
| err = vlan_dev_get_egress_priority(args.device1, &(args.args); |
| if (copy_to_user((void*)arg, &args, |
| sizeof(struct vlan_ioctl_args))) { |
| err = -EFAULT; |
| } |
| */ |
| err = -EINVAL; |
| break; |
| case GET_VLAN_REALDEV_NAME_CMD: |
| err = vlan_dev_get_realdev_name(args.device1, args.u.device2); |
| if (err) |
| goto out; |
| if (copy_to_user(arg, &args, |
| sizeof(struct vlan_ioctl_args))) { |
| err = -EFAULT; |
| } |
| break; |
| |
| case GET_VLAN_VID_CMD: |
| err = vlan_dev_get_vid(args.device1, &vid); |
| if (err) |
| goto out; |
| args.u.VID = vid; |
| if (copy_to_user(arg, &args, |
| sizeof(struct vlan_ioctl_args))) { |
| err = -EFAULT; |
| } |
| break; |
| |
| default: |
| /* pass on to underlying device instead?? */ |
| printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n", |
| __FUNCTION__, args.cmd); |
| return -EINVAL; |
| }; |
| out: |
| return err; |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |